Strokes on multiple objects are not consistent in size

Recently, I've noticed that when I have an image and I apply a stroke to it...it looks either bigger or smaller than another image that I would apply the same stroke to. For example: Picture A has a 1 pt stroke. Picture B has a 1 pt stroke, however, it is much thinner than the 1 pt stroke on Picture A.
I use a lot of pictures in proposals and it there have been so many times that I'll stroke a picture at 1 pt and another at 1 pt only to have to increase/decrease the stroke pt so that it matches the 1 pt stroke.
Does that make sense???
What causes this and can I fix it??
Thanks!

It sounds like you have the "Adjust Scaling Percentage" radio button enabled in the general preferences. With that enabled, the stroke will change size when you scale a frame, but the size listed will remain constant until you select "reset scaling to 100%" in the control panel menu.
Peter

Similar Messages

Cant use colours in AI free version.stroke and fill options are not active either

cant use colours in AI free version.stroke and fill options are not active either

In the Trial version of Illustrator try this:
In the top right of your screen, choose 'Essentials' from the workspace menu.
Then from the same menu, choose Reset Essentials.
Next, click the Selection tool in the Tools panel (strip on the left side of your screen, it is the black pointer at the top).
Click on the object you want to change the stroke and fill colour for. Does it display with little handles around it (this is called bounding box)? E.g. can you tell it is selected?
You should see the Stroke and Fill options in the Control panel (top horizontal strip above your document), if the object you've selected is a path. But if for instance you selected as a placed photo, you won't see the Stroke and Fill options.
If possible take a screenshot of what you are trying to do, and we can be of more help hopefully.

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

System is not set to changable - objects are not changeable

Hi Gurus,
I am trying to open a query in the test system. while opening the query a error message is showing like: system is not set to changable - objects are not changeable.
Kinly let me know how to solve this error.
Due to this reason in my Plannin modler screen its showing that query is inconsistant,
Regards
Sajid khan
Edited by: sajid.khan on Jun 22, 2010 9:35 AM

Hi.
In RSA1->Transport connection->ShftCtrl0 check whether you have any transport request connected.
In addition ensure in "objects changebility" that you can change queries.
Regards.

Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely

Hi everybody !
I have a strange problem with SOAP deserialization in flex 3.2, and I thought this forum will be the best place to get answers ...
When I try to fetch some objects (like the ones shown below), the XMLDecoder does not deserialize all the properties.
In this case, it stops at the property named "rating". After it, all other data are lost.
I've used the flex builder debugger to locate the problem, and this lead me to the following method in the XMLDecoder class :
getApplicableValues(parent:*, valueElements:XMLList, name:QName,context:DecodingContext, maxOccurs:uint):XMLList:
State of the variables, before the "bug" :
The strange behavior appears after the five first properties had been deserialized correctly.
At this step : startIndex = 5, and the next property to unmarshall is "user" (according to the MExpertNotes object mapping)
the valueElement's list contains the following elements :
to simplify the notation, I will write only the position in the list and the xml tag name (see the complete soap response for more details at the end of this post)
(position, fieldName)
(0, ID) -> inherited from MotocycletteObjectImpl
(1,comment)
(2, noteValidation) (a Bean, never returned by our service -> set to null)
(3,noteValidationID)
(4,rating)
(5,timeOfCreation) -> inherited from MotocycletteObjectImpl
(6,user) (a Bean, never returned by our service -> set to null)
(7,userExpert) (a Bean, never returned by our service -> set to null)
(8,userExpertID)
(9,userID)
(10,version) -> inherited from MotocycletteObjectImpl
when it enters the for loop, at the first iteration the valueElements[i].name is equals to "timeOfCreation" and the name parameter is equal to "user".
so this test : if (name == null || valueElements[i].name() == name
|| ((name.uri == "" || name.uri == null)
&& name.localName == valueElements[i].name().localName))
returns false. The skipAhead variable is set to false (and i don't understand why). It stops iterating over the valueElementList, and so, skips all other properties.
Is this a bug ? Does a workaround exists ?
This affects many of our objects.
Any help would be greatly appreciated.
Best regards,
Jules Pajot
R&D engineer for Mikros Image
www.mikrosimage.fr
[EDIT] : My Message was too long, so I put the complete message here :
http://docs.google.com/View?docid=dd6j35ft_38grb9c7cr
PS : I apologize for my english wich is far from perfect :)
As a reminder , the XMLDecoder class method ( line 2204 ):

<div class=Section1> color:#1F497D'>The holidays are starting here. The experts in the area may already be away. Please file a bug. It might help if you can simplify your test case to use an XML file that is local so we don’t need your server connection.<o:p></o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Jules Pajot [mailto:[email protected]] Sent: Tuesday, December 23, 2008 9:05 AM To: [email protected] Subject: Re: Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely<o:p></o:p> </div> <o:p> </o:p> A new message was posted by Jules Pajot in Developers -- Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely Nobody has an idea about my problem ? <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b74f93/0">Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b74f93!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

Catalog objects are not found sometimes.

Sometimes we hit an error that our catalog objects are not found. We find that the relevant column views in the schema _SYS_BIC are missing. So it should be the root cause. But we don't know why these views are removed. Could you give us some explanation?
Thanks,
Li

Hi Li,
I think maybe they are deleted by someone manually.
BR,
Phoebe

Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
I didn't notified any errors while registering our counter objects or while running Perfmon.exe
Note: Same counter objects are available and working fine with Windows Server 2008 R2.
for diagnostic our counters on WIN2012, ran command as follows:
cd c:\windows\sysWOW64
lodctr /Q
I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
Appreciate quiclk response with solution or clues to diagnose it more details.
Thanks & Regards,
Sudhakar Rudra

Hi,
Thanks for your reply.
I hope you understood our problem.
same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
and
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
Do you see any issues of registry entries. ?
On what basis perfomance monitor list few enabled counters?
How can we add our counters manually to perfomance monitor?

Error - Some objects are not available to your user profile...

Hello,
It is for BI 4.1 on Windows. We have a connection called CON1 pointing to DB1. It uses UNIV1 All reports were working fine and we were able to refresh it as well.
Now the CON1 is changed to point to DB2 and we are now getting following error - "Some objects are not available to your user profile. You cannot refresh this Query. See your Business Objects administrator to request rights".
If I create a new report using CON1 and the it works fine. Only the old reports are still causing issue on refresh. I tried with Admin account as well and same issue.
The CON1 is still CON1 and universe UNIV1 is still using CON1. Just the content was edited from DB1 to DB2 in CON1. If we create a new report then no issue.
Can anybody advice if something needs to compiled. Your help will be greatly appreciated.
Regards,
SS

Your old reports are still pointing to same connection. Remember the DSN has been pointed to use another Database. The records and entries will be different. In addition as the records or object mapping have changed for these reports. Hence this would be a very normal behaviour.
Create a new connection named CON2 or something like that to point DB1 as per your requirement. This way your original reports would work.

0EQUIPMENT_ATTR; DATE FROM & DATE TO objects are not available

Hi,
In the equipment masters iam getting the FROM DATE & TO DATE, even when iam scheduling the info package, master data is getting loaded based on these dates. once after loading iam able to see the FROM DATE & TO DATE data at object level.
But when i want to use the same date fileds at report level to check the equipment usage period based on the functional location means these objects are not even available as attributes at report level.
Can any body suggest me the approach how i can get these fields at report level and make use of them.
Regards,
Prabhakar.

Hi,
In the equipment masters iam getting the FROM DATE & TO DATE, even when iam scheduling the info package, master data is getting loaded based on these dates. once after loading iam able to see the FROM DATE & TO DATE data at object level.
But when i want to use the same date fileds at report level to check the equipment usage period based on the functional location means these objects are not even available as attributes at report level.
Can any body suggest me the approach how i can get these fields at report level and make use of them.
Regards,
Prabhakar.

Why the distant objects are not shown ?

Hi , everyone .
The distant objects are not shown unless moving the view closer to them in Java3D .
How to change or set to show the distant objects without moving the view ?
Anyone on any information or advice would be helpful.
3QS !!!
PS: using the defualt virtual universe : SimpleUniverse

When you are creating the View Object do something like this:
// Set up the Front Clipping Distance - in Virtual Eye Coordinates
myView.setFrontClipPolicy( View.VIRTUAL_EYE );
myView.setFrontClipDistance( FRONT_CLIP_DISTANCE );
// Set up the Back Clipping Distance - In Virtual Eye Coordinates
myView.setBackClipPolicy( View.VIRTUAL_EYE );
myView.setBackClipDistance( BACK_CLIP_DISTANCE );
The VIRTUAL_EYE can be replaced by PHYSICAL_EYE and a few others(check javadocs for View for more info)
and the FRONT_CLIP_DISTANCE and BACK_CLIP_DISTANCE are just :
public static final double FRONT_CLIP_DISTANCE = 0.1; // 0.1 Virtual Meters
public static final double BACK_CLIP_DISTANCE = 100; // 100 Virtual Meters
so to get your objects in the distance to render at a greater distance from them, then just increase the BACK_CLIP_DISTANCE to 1000 or something like that
NOTE: the larger the BACK_CLIP_DISTANCE, the longer and slower it will take to render you scene each frame. YOU WILL PAY FOR THIS (in CPU time)
Hope this helps
-- Rob

I am using illustrator CC there are not showing scale size pointer in any object?

I am using illustrator CC there are not showing scale size pointer in any object? Anyone tell me why it was does it? And how i can come again on that position?

Or maybe Cmd(Ctrl)-U which is the toggle for Smart Guides?

Profit center dummy and company code XX01 are not consistent

Hi Gurus ,
can you please tell what i should do when the system gives the message that Profit center dummy and company code XX01 are not consistent . this is happening when i post document in FB50.

Owing to program or transport errors, the company code assignment of profit centers may not be stored correctly.
This inconsistent data then causes program terminations or short dumps in further processing.
This note contains the report ZPCA40B_CHECK_CEPC_BUKRS, which checks the consistency of the company code assignment and corrects possible errors.
REfer to OSS <a href="https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=388178&_NLANG=E">388178</a>

Batch element raise error for few cases as Multiple entries are not allowed

Dear
Element type :' NON-RECURRING'
Multiple entry :' un-checked'
We have a commission element as non-recurring. As per company policy we allow this commission on Assignment criteria and it got successfully transfer we run it previous month. But today we are doing the same activity and getting error “Multiple entries are not allowed for this entry” in two cases while batch validation. However when we enter this element manually under the assignment element entry window, it allow user to save without any restriction.
So, why system not allow it through batch window.
I am very thank full to you, pls very critical.
Pls advice.

User uploaded duplicate assignment for the same element, therefore system was not being allowed to process for that batch. we removed duplicate record and the error was removed.

Reg : "Error multiple Receivers are not allowed for Synchronous calls"

Hi All,
Can somebody tell me why I am getting this error "Error multiple Receivers are not allowed for Synchronous calls" when I am using Synchronous Soap Request to WebService and the response from webservice is being sent to multiple receivers which are Business services based on Receiver determination condition(Services W/o Party).

Hi , If you are simply looking up data (and not updating tables ) using RFC you can use RFC Lookup APIs to create a java mapping
The source message has to be a RFC request message interface and target should be RFC response message interface.
Also you can use three step mappings in a single interface mapping.
1. from your request message to RFC request message mapping
2. java mapping which will do the lookup and give you rfc response back
3.rfc response to your target response mapping.
PS: RFC lookup can be used if there are not may hierarchy in the RFC Response structure. (i.e. may be 3 or 4 level nesting permitted)
To help you further
The following is a link which gives you access to a ready made source code. you just need to compile it and create a jar and import the mapping in imported archive
http://knowhowsapxi.synthasite.com/rfc-loolup.php
Edited by: Progirl Progirl on Oct 31, 2008 1:33 PM

Multiple writers are not allowed.

在LabVIEW按執行時,出現錯誤,跑出 Multiple writers are not allowed.
不知道哪邊出錯.

這是在ni.com google 的結果。
http://forums.ni.com/ni/board/message?board.id=170&message.id=235523&requireLogin=False
http://digital.ni.com/public.nsf/websearch/A8AC9A751404BAB18625672400630A3D?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/3123
http://digital.ni.com/public.nsf/websearch/1085057DB6F930058625672400646805?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/4679

Strokes on multiple objects are not consistent in size

Similar Messages

Maybe you are looking for