'Structure Changed' Error when running a query
Hi,
I created a query with 2 structures. One structure for the time periods and one with Key figures (Calc and Restricted).
The query ran fine and subsequently I put this into a workbook which had other queries and made a workbook type report.
I modified the structure with the key figures recently and when I run the query now a popup box appears saying "warning; structure changed" and lists down the query elements that I changed, and subsequently the query does not run (no data is displayed).
But if I open the same query in design mode and do nothing and run the query again (with the same input parameters), it runs ok.
Please advise on how I can sort this out.
Any help would be greatly appreciated.
Thanks,
Dominic
Hi,
If you want, you can remove the query with 'Remove Query' option in the BEx toolbar and then re-insert the query and then save the changes to the workbook. The next time, you refresh the workbook you won't get any such messages.
Thanks
Similar Messages
-
Error when running a query against Multiprovider using 0FIGL_VC1
Hi SAP Gurus,
I'm creating a MultiProvider for FI-GL.It has 2 Cubes.one is 0FIGL_VC1 (Virtual Cube) and other one is Customised Cube.When I run Query against this MultiProvider with the combination of basic cubes key figures,I'm getting an error
'Abort system error in Program SAPLRSDRC and Form RSDRC/Form DISPATCHER/RECEIV '
then system gets disconnected from the Server .
Please give me the solution to fix it & I'll assign the points .
Thanks & Regards
RajaHello Suman,
Check the table rszglobv for this variable - ZCONLEH.
If it is available there then see which infoobject it belongs to and then look for that in the query designer. May be resaving the query solves the issue.
If the variable is not available in the table, then it seems that the variable is lost and you might have to recreate it for keeping the semantics of the query the same as it was before the upgrade.
Regards,
Shweta -
Error when running a query in BI 7.0
Hi All,
We have recently upgraded our BI system to BI 7.0. It is a technical Upgrade. The Bex version is also upgraded from Bex 3.5 to Bex 7.0. We are trying to execute a query which we have been using earlier on 3.5 system. We get an error message "Error cannot use variable ZCONLEH in structure elements".
Can anyone let me know what could be the issue and how I can solve this?
SumanHello Suman,
Check the table rszglobv for this variable - ZCONLEH.
If it is available there then see which infoobject it belongs to and then look for that in the query designer. May be resaving the query solves the issue.
If the variable is not available in the table, then it seems that the variable is lost and you might have to recreate it for keeping the semantics of the query the same as it was before the upgrade.
Regards,
Shweta -
BEx error when running a query or workbook
Hi guys,
We're experiencing the following issue (trace dumped below) within BEx, while running either queries or workbook. Nothing special in ST22.
SM21 says:
Communication error, CPIC return code 020, SAP return code 223
Conversation ID: 53497548
CPI-C function: CMSEND(SAP)
We're using:
BEx version "7.x (based on 7.20)", SP3, revision 1728
SAP version
SAP_ABA 700 0023 SAPKA70023
SAP_BASIS 700 0023 SAPKB70023
PI_BASIS 2006_1_700 0013 SAPKIPYM13
ST-PI 2008_1_700 0003 SAPKITLRD3
SAP_BW 700 0025 SAPKW70025
FINBASIS 600 0019 SAPK-60019INFINBASIS
SEM-BW 600 0019 SAPKGS6019
BI_CONT 703 0016 SAPKIBIIQ6
ST-A/PI 01M_BCO700 0001 SAPKITAB7F
Dump content:
3/3/2011 12:39:15 PM----
com.sap.bi.et.analyzer.api.BExApplication+BExConnectionLostException: CPIC-CALL: 'CMRCV : rc=20
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner '10.1.9.126:3320' broken
TIME Thu Mar 03 12:39:14 2011
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 5087
DETAIL NiIRead: P=10.1.9.126:3320; L=0.0.0.0:2225
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 6
at com.sap.bi.et.analyzer.api.BExApplication.Process(BExParameter iParameter)
at com.sap.bi.et.analyzer.addin.BExExcelApplication.Process(BExParameter iParameter)
CPIC-CALL: 'CMRCV : rc=20
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner '10.1.9.126:3320' broken
TIME Thu Mar 03 12:39:14 2011
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 5087
DETAIL NiIRead: P=10.1.9.126:3320; L=0.0.0.0:2225
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 6
at com.sap.bi.et.analyzer.api.BExApplication.Process(BExParameter iParameter)
at com.sap.bi.et.analyzer.addin.BExExcelApplication.Process(BExParameter iParameter)
Brgds,
OlivierHello Suman,
Check the table rszglobv for this variable - ZCONLEH.
If it is available there then see which infoobject it belongs to and then look for that in the query designer. May be resaving the query solves the issue.
If the variable is not available in the table, then it seems that the variable is lost and you might have to recreate it for keeping the semantics of the query the same as it was before the upgrade.
Regards,
Shweta -
Error When Run ABAP Query in Different Client
Hi ABAPers,
Currently I develop ABAP Query using SQ01 / SQ02 / SQ03.
Everything goes well, and I have already test that the query work well. The query can be execute and show the result correctly.
My peer in same SAP system, but different client, run the same query. As I know that query is same with ABAP program which is client independent, can be execute across client. But then the runtime error show up.
The error said that
Exception condition "NO_POSITION_FOUND" raised.
Can anybody told me what's happened here, and how can I resolve this problem?
Thank you in advance
Regards
HadiHi,
Since you are testing it in other client,i think due to data inconsistency you are getting that error.
Try to check the corresponding tables in both clients and can verify.
Cheers,
KK. -
Axis timeout error when running long query
Hi all,
we've encountered a timeout problem trying to call webservice that responses in long delay. Error we got comes from axis library:
java.net.SocketTimeoutException: Read timed out
As I know, default timeout value for axis is 60 s. Is there any way to change it in XMLP?Hi Tim,
Thanks for the follow-up!
Is there any way we can tweak this manually for now for the version 5.6.2 of XML Publisher? I don't feel like its time now for us to go forward to BI Publisher 10.1.3 since we are late in our delivery but we will certainly evaluate the possibility of upgrading it to 10.1.3 for the next delivery. I just got a SR soft closed saying:
"If they are putting it into 10.1.3.4 then they do not have a fix yet and you are asking for a backport 4 versions back which is unlikely.
But you should ask in the thread."
So thats what I'm doing now, hoping its possible! Up to now, we haven't found any workaround for this issue.
Thanks for your help! -
Getting the MDX query select error when running a webi report on BI query
Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
JeethenderThe Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2. -
ODBC error when running query on WEBI XI R2
Hi all,
I have a newly installed XIR2 on Win 2003 (32-bit), I created a simple Universe pointing to MSSQL 2005. I encountered the error below when running a query from WEBI:
Database Error: [Microsoft] [ODBC Driver Manager] Data source name not found and no default driver specified. Error: WIS 10901
Any ideas? Thanks!
Cheers,
ArmsHi Armstrong,
If you are using an ODBC connection, make sure the connection is defined exactly the same on the server as it defined on your computer... With SQL you can try to create an OLE DB connection, then when you export the universe, the connection will still work... ODBC connections need to be created on all machines if you plan to use the desktop tools.
Hope this helps
Jacques -
Error message "Error when scheduling the query(JOB_CLOSE)".
Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum -
Getting Error while running this query
Hi,
SELECT SUM(BATCHWISE_COUNT) TOTALBATCHCOUNT,
TO_CHAR(SUM(BATCHWISEAMOUNT),'9,99,99,99,99,99,99,99,990.99') TOTALAMOUNT ,
SUM(SLIP_RECORDS) TOTALSLIPCOUNT,
SUM(CHEQUEONLY_RECORD) TOTALCHEQUECOUNT
from (SELECT COUNT(TI.FLDITEMINITIALID) BATCHWISE_COUNT from TBLITEMINITIAL TI),
(select SUM(IT.FLDAMOUNT)/100 BATCHWISEAMOUNT from TBLITEMINFOTRANS IT ),
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND TI.FLDITEMTYPE = 'P' AND TI.FLDCAPTURINGMODE = 'CP') SLIP_RECORDS,
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND FLDITEMTYPE = 'C' AND FLDCAPTURINGMODE = 'CO') CHEQUEONLY_RECORD
from TBLITEMINITIAL TI,
TBLITEMINFO II,
TBLITEMINFOTRANS IT
WHERE II.FLDITEMINITIALID = TI.FLDITEMINITIALID
AND II.FLDITEMID = IT.FLDITEMID
GROUP BY TRUNC(TI.FLDCAPTURINGDATE),TI.FLDBATCHNUMBER,TI.FLDCAPTURINGBRANCH,TI.FLDSCANNERID)
Im geeting error
ORA-00933: SQL command not properly ended
when running this query
I don't know what mistake i have done in this query , Kindly help for solving this issue
Thanks
Bala,
Edited by: 965937 on Feb 11, 2013 9:25 PMDear Friend
Try with the query below,
<<
SELECT SUM(BATCHWISE_COUNT) TOTALBATCHCOUNT,
TO_CHAR(SUM(BATCHWISEAMOUNT),'9,99,99,99,99,99,99,99,990.99') TOTALAMOUNT ,
SUM(SLIP_RECORDS) TOTALSLIPCOUNT,
SUM(CHEQUEONLY_RECORD) TOTALCHEQUECOUNT
from (SELECT COUNT(TI.FLDITEMINITIALID) BATCHWISE_COUNT from TBLITEMINITIAL TI),
(select SUM(IT.FLDAMOUNT)/100 BATCHWISEAMOUNT from TBLITEMINFOTRANS IT ),
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND TI.FLDITEMTYPE = 'P' AND TI.FLDCAPTURINGMODE = 'CP') SLIP_RECORDS,
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND FLDITEMTYPE = 'C' AND FLDCAPTURINGMODE = 'CO') CHEQUEONLY_RECORD
from TBLITEMINITIAL TI,
TBLITEMINFO II,
TBLITEMINFOTRANS IT
WHERE II.FLDITEMINITIALID = TI.FLDITEMINITIALID
AND II.FLDITEMID = IT.FLDITEMID
GROUP BY TRUNC(TI.FLDCAPTURINGDATE),TI.FLDBATCHNUMBER,TI.FLDCAPTURINGBRANCH,TI.FLDSCANNERID;
Regards
Ahamed Rafeeque Cherkala
Edited by: Ahamed Rafeeque on Feb 12, 2013 3:20 AM -
Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC
I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx -
ORA-04062 error when running forms with different users
ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ; -
How to solve error when run Depreciation (T-Code:AFAB)
Dear All Experts,
Hi,
I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB). with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
Documents manually posted within dep.doc.number range
Message no. AA728
Diagnosis
In the number range interval for the document type for posting
depreciation, a document has been posted which was not created within
the framework of depreciation posting. The last document posted by
depreciation posting was assigned the number .
Procedure
Contact your Systems Specialist. When changing the number range interval
for the document type in depreciation posting, you have to specify a new
interval in which no documents exist. Using organizational measures, you
can guarantee that there are no documents apart from those created by
depreciation posting in this number range.
Would you help me how to solve this error?
Thank you in advance
Best Regards
Utarat.PHi Utarat,
first question is: have you really manually posted a Documents within dep.doc.number range
If you post with RABUCH00, note 193984 could be relevant for you.
Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
Example:
TABA
MANDT BUKRS AFBLGJ AFBLPE AFBANZ BLNRF BLNRT XBUKZ
100 XXXX 2010 004 01 4200000013 4200000016 X
100 XXXX 2010 005 01 4200000017 4200000020 X
100 XXXX 2010 006 01 4200000021 4200000024
On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already
exits.
BUKRS BELNR GJAHR BLART BUDAT CPUDT CPUTM TCODE
XXXX 4200000024 2010 YY 30.06.2010 06.07.2010 19:36:30 ABF1
XXXX 4200000037 2010 YY 30.06.2010 06.07.2010 19:37:47 ABF1
Regards Bernhard -
Error when run Depreciation Posting Run AFAB
Hi,
I found error when run Depreciation Posting Run for period 7 2007.
FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below.
Error Message:
Documents manually posted within dep.doc.number range
Message no. AA728
Diagnosis
In the number range interval for the document type for posting depreciation, a document has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
Procedure
Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
Can any one help how to solve this issue?Hi Paul,
Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
No Year From No To No Current No Ext
03 2001 0300000000 0399999999 - /
03 2002 0300000000 0399999999 - /
03 2003 0300000000 0399999999 - /
03 2004 0300000000 0399999999 - /
03 2005 0300000000 0399999999 - /
03 2006 0300000000 0399999999 - /
03 2007 0300000000 0399999999 - /
03 2008 0300000000 0399999999 - /
03 2009 0300000000 0399999999 - /
Referring back to Asset Accounting, the Reference Document: 19.
Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
Can you guide me more details on it?
Thanks in advance.
Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM -
Corba error when running rich clients in 3-tier mode.
Hello
I am dealing with an Error when running Rich Clients (WebI and DeskI) with 3-tier ODBC connection to the server.
The client does come up and I'm able to create the query but when the data in refreshed I do get the error:
A database error occured. The database error text is: (CS) "CORBA Initialization failed". (WIS 10901).
I have a test server which I'm able to do this kind of connection without a problem but when I try to connect to the Prod server in 3-tier data connection mode throught the server I get this error.
My setup is:
BO XI R 3.1 FP. 2.1
Clients are also updated with FP 2.1
The data sources are Oracle and Teradata.
Best regards,
Hjortur.Hi Guys,
I am facing same error when I run the report from CMC. Error is like u201CThe database error text is: (CORBA) "Error on Executeu201D. (WIS 10901)u201DEven I have re-started the connection server but bad luck.
I would like to appreciate if someone help me out for the same.
Thanks in advance..!!
Thanks & Regards,
Keyur Modi | Functional Consultant Enterprise Solutions
TATA Technologies, Pune
m: +91-9769855899
website: www.tatatechnologies.com
Maybe you are looking for
-
IPod touch 4G keeps flashing battery in lock screen
I plugged my iPod 4G into my new windows 8.1 laptop and I keep getting the battery/charging symbol flash on my lock screen when plugged in. My iPod worked completely fine in my windows 7 laptop, there is nothing wrong with the iPod or the USB as far
-
I had a fully functioning installation of CS3 on my iMac (Intel 2.16 MHz) and had a hard disc crash. After replacing the hard disc, I reinstalled from my original discs, but get the following message: "Licensing for this product has stopped working.
-
Does Java/JVm have a way to ditinguish between real files and Symbolic link
Hello guys, I am using java.io.File.listFiles to list files in a directory. I have a symbolic link in the directory. the "listFiles" listing symbolic file contents too. As the real directory Symbolic link pointing is huge, the application taking too
-
Can anyone give advice as to choosing a D/A converter? I am going to be importing 40+ Hi8 tapes into FCE. I currently own a 'Dazzle' converter that is several years old and drops the signal often. I have used a Sony Digital 8 that has a built in conv
-
Dreamweaver CS6 Waiting to install-
I have subscribed to the Creative Cloud. (I have CS5) I have successfully downloaded and installed InDesign, Photoshop, and Illustrator. I downloaded Dreamweaver and it seemed to download just fine. After it downloaded it has this text next to the lo