Structure maintenance not provided for Extraction structure MC02M_SCN

Hi BW Experts,
I am getting an error "Structure maintenance not provided for Extraction structure MC02M_SCN" while maintaining 2LIS_02_SCN datasource.I activated the datasource in RSA5 also.But i couldnt able to maintin this datasource.Can you please help me on this.
Thanks in advance.
Thanks,
Ram.

Hi,
In LBWE for some of the DS Structure is not provided by the SAP.
So For the mentioned DS "CGR" you can't see the structure from LBWE .
Enhancement will be done based on extractstructure.
Two ways 1. Through RSA6
2. TAKE THE EXTRACT STRUCTURE NAME OF " CGR" DS from RSA6 and append the fields in SE11.
3. Append the fields to the DS Extract strcuture " MC02M_0CGR" in se11
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 30, 2009 5:28 AM

Similar Messages

Error :Extract Structure does not exist for the table YFSP03A .

Hi Could you please help me to solve the above mentioned problem?
I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01, FAGLBW02.

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

PLIKZ field for COPA data source not there in Extract structure.

Hello all,
When I create a data source for COPA the PLIKZ field from the segment level is not maintained in the Extract structure and it is not replicated to BW also. But the other field GJHAR is maintained in the Extract structure which is also there in the segment level!!
Clarify me why it is not available in extract structure? Also we are in 4.7 version and 3, 5 in BW.
Points will be assigned!!!
Thanks
Ram

Hello Friends,
Could some one help me why the field PLIKZ is not available in the Extract structure when i create a COPA Data source?
Need ur suggestions urgently!!!
Helps please
Thanks in advance once again

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

How to get rid this Warning=Sales order (SOBKZ = ) is not provided for this

Dear Concerns
In MB1C, Mov Type=521E, and the batch no=A.
After entering all the required entries the systen gives me the warning and the system save the transaction after pushing the enter button five to six times.
Sales order (SOBKZ = ) is not provided for this goods movement.
I want to get rid of this warning .
So that the system could save the transaction in one click.
Regards:Vijay

Hi
Can u please tell me the solution of that issue as in my case the item has to be received
and reserved against the sales order.
can i make my sales order item cate mark with the special stock indicator and
does it help to solve my problem
Yes this will only solve the problem. You need to mark your sales order item cate with special stock indicator E
Then PGI will be smooth otherwise you can expect problem
This reply is for the other friend
In-IMGMaterials ManagementInventory Management and Physical Inventory---Define Attributes of System MessagesSettings for System Messages----
Here in the new entries add message M7---374 with version as 00 and make that as error message and save it
Regards
Raja

Sales order (SOBKZ = &1) is not provided for this goods movement the messag

Dear Friends,
I have created one subcontracting PO based on a sales order, so the order is belonging to special stock...
Now i got a below error when i transfer the stock to subcontractor against this PO through MB1B but it likes as warning msg(in Yellow) but i can't post this transaction.
Sales order (SOBKZ = &1) is not provided for this goods movement the message no is M7374
Kindly help me how to over come from this?
please note that as per the system suggesion i go to Define Attributes of System Messages for changing the message type from E to W. But i can't find this kind of message type in that list.
regards,
sathes

Hi,
Subcontracting for Sales Order Stock: -
Purpose: - Subcontracting is also possible in conjunction with sales order stocks. The subcontracting orders are account-assigned to a sales order. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock the time of the goods receipt. The material manufactured is also posted to the sales order stock.
The cost of subcontracting is then debited to the sales order.
Since the components are not transferred to the "stock of material provided to vendor", it is recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks.
Features: -
Withdrawal from Stock of Mat. Provided or Sales Order: -
For components that are managed in sales order stock, you can define whether the components are to be withdrawn directly from each sales order or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
In the MRP view of the material master record (MRP 4)
In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types )
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock.
Refer following link;
[Subcontracting for Sales Order Stock and Project Stock|http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm]

I bought this very nice iMac. The first time I ever use a Apple product. Can someone please tell me where the delete key is on the keyboard. I cannot think for one moment that Apple did not provide for such a key. Please help.

I bought this very nice iMac. The first time I ever use a Apple product. Can someone please tell me where the delete key is on the keyboard. I cannot think for one moment that Apple did not provide for such a key. Please help.

The delete key does a backward delete because it is the natural way to delete while typing. May not be to you and the millions of youngsters who grew up with windows computers. When you are typing and want to delete that which you just typed you are already at the end and you delete back to where you want to re-type. When you go back to a document and want to delete a selection, you have to go to the end of the selection instead of the beginning. it's just the way its always been done on macs. it takes some getting use to.
If you select text to be deleted with your mouse then the delete key deletes the selected text. same for either delete key method.
It is not convenient when you tab to fields in a form. That why fn-delete does a forward delete.
Macs have a couple of keyboards. The small "wireless keyboard" only has the (backward) delete (fn-delete forward). The larger "Apple Keyboard with Numeric Keypad" has both a Delete (backwards) key beside the = abd it has the "delete >" key in the groups with fn, home, end, Pg up and Pg dn. This keyboard is best for users who have switched from windows or are familiar with the windows forward delete.

Ticket not provided for rights authentication

Hi All,
Having issues using nzrviewer.exe /zenrights i get "Ticket not provided for rights authentication"...
1. Does this mean that ZCM does not support rights authentication using standalone?
2. And with password authentication can i limit users to 1 device only?
Please advise its been a nagging question
thanks,
kahlil

Kgabion,
> 1. Does this mean that ZCM does not support rights authentication
> using standalone?
correct
> 2. And with password authentication can i limit users to 1 device
> only?
only if you have different passwords for each device
Shaun Pond

Append Structure to MCCOMP but not appear in Extract Structure (LBWE)

Dear Experts,
We are using the datasource 2LIS_04_P_COMP
1) We append a field into MCCOMP and MCCOMPB, but that field doesn't appear in the pool of communication structure fields. Therefore, we cannot move from the pool (right side) to extract structure (left side)
2) We need to add a field into MCCOMP, as we need to capture Delta for this field. Is there any user exit that can populate value for this structure?

Hi,
Follow the steps.
1. Delete Setup tables in LBWG.
2. Clear Q in SMQ1/LBWQ.
3. Delete Q in RSA7.
Then fine the ECC correct client for Customizing and there you can do the changes and activate it. If still it is not allowing and you want to add fields by using enhancements then goto SE11, and give MCCOMP and Append Structure and add fiels and write code in CMOD.
Thanks
Reddy

"Result" row not appearing for the Structure record in Bex Designer.

Hi
In BI BEx Designer,
under Rows-> click any Characteristic-> Display Tab-> Result Rows: "Always Display" Option controls Last Row named "Result" (yellow colored) after the actual data reports ends.
But i am not finding this thing for the structure.
Actually my this report is based on 'Structure-> 2 selections' under Rows; once i run this query i get data without yellow colored 'Result" row at the end of report. I wanted to maintain the symmetry with other reports.
Could u pls let me know how to get Query last "Result" record if i use only structure under the rows.
Thanks...

I limit the selection to display in one page, i see the overrall result but i've a result to show up after a Characteristic (result row option 'Display with more than one single value'), it works fine in BEx but not in web.
for the other query, yes i do KF in the report.
thanks

R3 Metadata table for Extract Structure?

Could someone please me tell which R3 metadata table has information on the Extract Structure objects (We are using R3 Ver. 4.7). Also, if anyone has a current list of useful R3 metadata tables I would appreciate that also. Thank you, Dave Burrows

Hi David,
Any structure in SAP is defined in the following tables (where DD02L-TABCLASS = 'INTTAB'):
DD02L = SAP tables (and strcutures)
DD02T = Text of SAP tables (language dependend)
DD03L = Fields of tables (and structures)
DD03T = Text of fields (language dependend)
There are more tables to fill in the metadata (just look with wildcard DD*).
Regards,
Rob.

Why Apple does not provide for call block / blacklist function on iphone?

If Apple frowns upon jailbreaking the iPhone, why not AT THE LEAST endorse and make available third-party application that can provide a decent call block / blacklist function (like the Call Blocker for BlackBerry)?
Can an Apple representative provide feedback pls?
[Most telcos do not provide call-screening as a value-add service. Even if they do, a more cost-effective method is still the better option.]

Have you asked your service provider if they offer any call blocking service? I know here in the USA, AT&T does, although they do charge $4.99/month for the service (it is part of a parental control package that allows control of both numbers that can be blocked from calling you, and numbers that your iPhone can call to).
On-phone black list apps typically work by using caller id info and looking it up against the apps own database of numbers you've entered. So your phone still rings at least once, as the phone needs to allow a brief connection for the app to get the caller id info before disconnecting a number flagged for blocking. There really is no way to truly block calls from the phone itself, you need your service provider to be on board with the idea, so they can dis-allow the call at the switch and truly block it from ever reaching your phone.

Error No. MCEX028 "You can not change the extraction structure" in LBWE

Hi,
I am getting this error when moving the fields from left to right...
Thanking you in advance,
Tarun Brijwani.

Hi,
Sorry for the wrong information..
Actually the error is "Struct. from appl. 02 due to open V3 proc. not changed -> Long text"
Data source name: 2lis_02_itm(unserialised v3 update)
1.tcode LBWG and deleted the set up tables for application 02
2..I went in rsa7(delta queue) but there are no entries in that queue...
it is absolutely empty...
2.I went in sm13 and put the client (all), user(all), and status radio button as 'all' and date as 01.01.2004 to current date,
some entries were displayed but for all of them, in the status column is "v2 processed" being displayed
and some of them are using synchronous update adjacent to which STOP tatoo is displayed
What do I do now..
Thanking you,
Tarun Brijwani.

Why does iCal not provide for recurring To Do's?

I recently installed Leopard on my iMac and MacBook Pro, which instantly killed my ability to sync with my Blackberry via Pocket Manager for Mac. I thus purchased and installed Missing Sync, which seems to work ok, but is far from a straightforward solution. Missing Sync does not synch directly between the Blackberry device and Entourage, but instead circuitously syncs the two via the iCal application. This limits the capability of Entourage to what is available in iCal.
Given that situation, I find iCal has at least one glaring omission. While Entourage allows for recurring dates on a Task, iCal does not on its To Do's--and thus resets all Entourage Tasks to single occurrence upon a sync. The workaround seems to be to create the recurring item as a Calendar Event, which does allow for recurrence in iCal, as opposed to creating it as a task. The downside in this is that there is no To Do List view which shows these items.
Any solution other than the above workaround? Any plans to fix this?

I also would like to see recurring To Do's. I know that you can do recurring events in iCal but that clutters up my calendar. I am a homemaker/housewife and when I used microsoft office then I had all sorts of recurring to do's (i.e. change out furnace filters, pet medicines, order new credit report, etc). When i would complete the to do then it would automatically reenter a new one for 1 month, 3 months, 1 year (whatever I had set for that particular item). Is Apple every going to incorporate this into there To Do list. And also I would like to see the To Do's on the iPhone just like you can see the notes.

Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

Hi, Experts:
I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
I have done the following in client 200:
- Activated datasources for for PM 2LIS_17_I3HDR in RSA5.
- Made selection in RSA6.
- Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
- I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
   No extraction structure for event I3: Messages active
   Message no. MCEX106
   Diagnosis
   You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
   System Response
   Data for event I3 is not transferred to the BW interface.
   Procedure
   First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
- I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
- I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
Would anyone please help me with what to do to fix this?
Thanks,
Jenny
Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

Hi, thanks for the reply!
Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
Thanks,
Jenny

Structure maintenance not provided for Extraction structure MC02M_SCN

Similar Messages

Maybe you are looking for