Structure missing in table ROOSGEN

One of our FI extractors is encountering a source system error. Upon checking the source system, we noticed in table ROOSGEN the field structure (TFSTRUC) is empty. normaly this has a value /BIC/CCXXXXXX. If this structure field is missing, how can we generate the structure?
On another note, in our QA system the datasource entry is missing completely in table ROOSGEN.
The datasource is seen in RSA6 for both systems above, so we are assuming it is already active.

Hi Aduri,
Thanks for the response.  Is there a way to check how/when this particular table was updated?  The entries in ROOSGEN have a last changed by, but these are under system users like ALEREMOTE and BWADMIN.  Im not sure if the structures in ROOSGEN in the source system are generated by BW which calls it, Im guessing not since this is the datasource configuration in R/3.

Similar Messages

  • Entry missing in table TMC6 for unit KOEIN

    Hi,
    The STD Info structure S071 us marked for VA (Sales Order), it does not allows to change as it is SAP STD. I have a scenarios where these tables to be updated for VB (Contract). So i thought of creating a new table copying the existing S071, while i try to Update Rules for the new Info structure, i am getting the below copied error.
    I went through some of the links, but those are not giving the right answer. All comments are welcome...thanks
    Entry missing in table TMC6 for unit KOEIN:
    Message no. M2108
    Diagnosis
    The system attempts to determine the unit of the source field for field
    KAWRT. The data element KOEIN was defined as part of this process.
    The system now searches table TMC6 for this data element in order to
    define the two-character units ID. However, no appropriate entry could
    be found.

    Hi,
    It says -
    Solution
    This is corrected in the Support Package for Release 4.70, 5.00, 6.00, 6.02 and 6.03.
    We are running on 6.00 , how ever i will go through the Correction Instruction... thanks

  • How to read data from a CLUSTER STRUCTURE not cluster table.

    Hi,
    how to read data from a CLUSTER STRUCTURE not cluster table.
    regards,
    Usha.

    Hello,
    A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
    Regards,
    Mansi.

  • Error while saving SO - item 000010 is missing in table YVBAP

    Hello Experts,
    We are facing following issue while delivering an order with BOM material.
    1)     We created an order with sold-to customer blocked for delivery.
    2)     Then we removed the block from customer and also from document header/shipping tab.
    3)     Now when we tried to save the order it showed us an error-u2018item 000010 is missing in table YVBAPu2019
    We are not able to find the root cause of the issue. Could anyone please help us in this error?

    Hello,
    Please check whether delivery block is also removed under sales Tab of item overview. Also check at line item level, whether delivery block is removed for BOM items. Once this done, save the sales order again and try to create delivery.
    Br,
    Tushar

  • The row structure of the table BANFTAB is incorrect

    Dear Experts,
    I get right here the error message
    The row structure of the table BANFTAB is incorrect
    ZBANFN is a table type and has the line tab BANFN.
    Can you pls tell me what is wrong here ?
    FUNCTION Z_CHANGE_EBAKZ_FLAG.
    *"*"Lokale Schnittstelle:
    *"  CHANGING
    *"     VALUE(BANFTAB) TYPE  ZBANFN
      data lt_eban type table of eban.
      data ls_eban type eban.
      SELECT * FROM eban into table lt_eban where BANFN IN BANFTAB AND EBAKZ EQ 'X'.
      IF SY-SUBRC IS INITIAL.
        LOOP AT lt_eban INTO ls_eban .
          ls_eban-EBAKZ = ' '.
          modify eban from ls_eban.
        ENDLOOP.
      ENDIF.
    ENDFUNCTION.

    Hello,
    You have to use a ranges table in this case.
    FUNCTION Z_CHANGE_EBAKZ_FLAG.
    *"*"Lokale Schnittstelle:
    *"  CHANGING
    *"     VALUE(BANFTAB) TYPE  ZBANFN
      data:lt_eban type table of eban.
      data:ls_eban type eban.
    data:
    l_r_banfn type range of banfn,
    l_wa_banfn like line of l_r_banfn,
    l_wa_banftab like likne of BANFTAB.
    loop at banftab into l_wa_banftab.
    l_wa_banfn-sign = 'I'.
    l_wa_banfn-option = 'EQ'.
    l_wa_banfn-low = l_wa_banftab-banfn.
    append l_wa_banfn into l_r_banfn.
    clear l_wa_banfn.
    endloop.
      SELECT * FROM eban into table lt_eban
      where
      BANFN IN L_R_BANFN "BANFN IN BANFTAB
    AND EBAKZ EQ 'X'.
      IF SY-SUBRC IS INITIAL.
        LOOP AT lt_eban INTO ls_eban .
          ls_eban-EBAKZ = ' '.
          modify eban from ls_eban.
        ENDLOOP.
      ENDIF.
    ENDFUNCTION.
    or you can use FOR ALL ENTRIES :
    FUNCTION Z_CHANGE_EBAKZ_FLAG.
    *"*"Lokale Schnittstelle:
    *"  CHANGING
    *"     VALUE(BANFTAB) TYPE  ZBANFN
      data lt_eban type table of eban.
      data ls_eban type eban.
      SELECT * FROM eban into table lt_eban
      FOR ALL ENTRIES IN BANFTAB "--> Add this
      where BANFN = BANFTAB-BANFN
      AND EBAKZ EQ 'X'.
      IF SY-SUBRC IS INITIAL.
        LOOP AT lt_eban INTO ls_eban .
          ls_eban-EBAKZ = ' '.
          modify eban from ls_eban.
        ENDLOOP.
      ENDIF.
    ENDFUNCTION.
    Try this & let me know in case of any issues.
    BR,
    Suhas
    Edited by: Suhas Saha on Feb 10, 2009 5:43 PM

  • FB70_The entry 001 is missing in table TAB_FSKB

    Hi,
        I create a company code, when I use FB70, enter company code、customer number、invoice and posting date, then click enter, a warning message will jump:
    The entry 001   is missing in table TAB_FSKB
    Message no. F5100
        If I change the company code to other one,everything is ok. So I think maybe something is wrong with the data related to company code.

    HI
    Plz go to OBY6 and check whether your company code is there are not. I dont think it is there. Even if it is there, see whether you have assigned the Chart of a/cs, fiscal year, document types, document no. ranges, field status grp.etc.
    Plz assign points, if its helpful.
    Regards
    Rajaram

  • Entry 001 is missing in table tab_fskb

    Hi , I get a problem when I use t-code:fb70,   the error message is "entry 001 is missing in table tab_fskb"    ,       is tab_fskb a table ?  I use se16 to view the table ,but there is no table named tab_fskb.      who can give me some solution?
      thanks a lot

    Dear Victor,
    Once you open a particular thread, after that why you don't follow it..?
    Forget about awarding points to a helpful suggestion or closing a thread,you don't even reply when anybody starts showing interest in your question.
    Yesterday you asked:
    What should I pay attention to do a successful client copy ?   
    I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
    so , I want to have your advices about how to do a successful copy. what should I pay attention to.
    And when I asked for certain information:
    Please specify the following things to help us analyze your situation.
    1. Your system landscape
    2. Your source and target system while doing the remote client copy.
    3. Also why you did client copy and more details about the problem that your developer is facing.
    Then only we can guide you.
    You didnt replied and again opening a new thread today
    PS: What you expect from others..?..To share knowledge when you dont even follow your post and least bothered about answering certain doubt of various potential repliers.
    Regards,
    Ashutosh

  • Se11 structure with se11 table type included

    Hi ABAP Gurus,
    in order to pass a complex datastructure by RFC I want to create a new structure via SE11 which includes in addition to some normal fields an field which represents a table of a certain type. Therefore I created a table type and tried to include that in the structure definition but without success. Any ideas of how I can create such a 'non-flat' structure in the ABAP dictionary ?
    I know that such a thing can be declared as a type in ABAP, but I'm not sure if I can do it in the dictionary.
    Any reply is very appreciated,
    Best regards, Philipp

    Hi,
    You can insert structure into the table, and vice versa is not possible.
    If you want to insert structure GO to Se11 -> provide table name -> chnage/create -> edit -> include -> insert -> provide the strcuture you want to include.
    Thanks,
    Sriram Ponna.

  • How to rearrange the structure of a table by using a view?

    At wits end: I need to reorganize the structure of a table into a new structure - either as a view or actually moving the data from the old structure to the new structure (using a view).
    The old structure is:
    TESTNAME, SCHOOL_ID, PTILE1, PTILE2, PTILE3 ... PTILE99
    Test1,0001,18,19,20...
    Test1,0002,23,24,28...
    Test1,0003,20,21,26...
    Test2,0001,48,52,55...
    Test2,0002,50,54,54...
    Test2,0003,60,62,64
    The new structure is:
    SCHOOL_ID,PTILE,TESTNAME1,TESTNAME2...
    1,0001,Score1,Score2...
    1,0002,Score1,Score2...
    1,0003,Score1,Score2...
    2,0001,Score1,Score2...
    2,0002,Score1,Score2...
    2,0003,Score1,Score2...
    99,0001,Score1,Score2...
    99,0002,Score1,Score2...
    99,0003,Score1,Score2...
    What this data shows are the percentiles for test scores for different tests for each school who took the tests.
    It seems like creating a view to arrange the data through a bunch of selects and unions would work, but I can't figure out how.

    Tricky.
    When confronted with a problem like this I try to write out an algorthm in pseudocode to work out what I want to do. If you have more than 2 or 3 tables to merge I'd consider going with a new structure; otherwise the view approach might be a good idea. Remember that if you go with a new structure you can insert once and update the other values later, something like
    foreach school insert row
    update testname1
    update testname2
    Good luck.

  • Schedule line is missing in table YVBEP

    Hi All,
    We added a new custom field in schedule line tab. For which we added code in PAI and user exit MV45AFZZ. When we are adding a schedule line we are getting the following error message:
    Schedule line 000010 0004 is missing in table YVBEP
    Message no. V1506
    The schedule line 0004 for the item# 000010 is having only 'confirmed qty' and 'rounded qty and order quantity' are both 0's. This schedule line was generated as there was no stock for the schedule line entered by user .
    Please let me know what has to be done to resolve this issue.
    Thanks,
    Karuna.

    Hi
    See SAP Note 178328 - Problems due to incorrect user exits in SD.
    This note says:
    The Y tables play a role only for the change mode of document
    processing. They contain the original status of those table entries
    that have been changed during the current transaction. Therefore,
    the entries in the Y table reflect the previous status of the
    document in the database.
    and
    You add a table entry. There is only one entry in the X table
    that has the update indicator I. There is no entry in the Y
    table.
    so, check in XVBEP that the field UPDKZ has the value 'I'.
    Read carefully this note
    Regards
    Eduardo

  • Query about screen as a structure used in table control.

    hi all,
    plz explain the fields in screen(structure).
    when and how it is used.
    specialy i/o, o/p,active,
    plz give example.

    hi,
    The screen elements text field, input/output field, status icon, group box, radio button, checkbox, and
    pushbutton all have general attributes, Dictionary attributes, program attributes, and display attributes.
    The elements subscreen, tabstrip control, and table control have general attributes, and special
    attributes relating to the respective type.
    We can divide the attributes of an element into:
    Statically definable attributes that cannot be changed dynamically
    Statically definable attributes that can be changed dynamically
    Attributes that can only be changed dynamically
    At the beginning of the PBO, the runtime system reads the statically-created and dynamically-modifiable
    attributes of each screen element on the current screen into a system table with the line type SCREEN.
    Dynamic changes to the attributes of screen elements are temporary.
    Using this technique to modify the attributes of a screen element (for example, to change whether an
    input/output field is ready for input), you can replace long sequences of separate screens, which are
    more costly in terms of both programming time and runtime.
    The system table with line type SCREEN will be called SCREEN system table in the following unit.
    When a screen is processed, the SCREEN system table contains an entry for each element created in
    the Screen Painter for that screen.
    The system table SCREEN is initialized at the start of the PBO event for the current screen. To do this, a
    system program copies the statically defined attributes of the individual screen elements into the table.
    You can then change the dynamically-modifiable attributes of the elements on the screen in a module at
    PBO using the following statements: LOOP AT SCREEN.
    MODIFY SCREEN.
    ENDLOOP.
    To do this, you use the structure SCREEN, which is created automatically by the system, and filled with
    the values of each successive line of the system table in the loop. Set attributes have the value '1',
    attributes that are not set have the value '0'. To change the system table, use MODIFY SCREEN. within
    the loop.
    To find the element whose attributes you want to modify, you can use a LOOP on the SCREEN table,
    and query one of the following fields: SCREEN-NAME, SCREEN-GROUP1 to SCREEN-GROUP4.
    You can change the attributes of several screen elements simultaneously at runtime, by including them
    in a modification group in the Screen Painter. Assign all elements that will be changed within a single
    processing step to a group in the Screen Painter.
    To do this, enter a group name for each of the relevant elements in one of the fields GROUP1 …
    GROUP4.
    You can include each element in up to four modification groups. You can choose any three-character
    sequence for the group name. You can assign elements to a modification group either in the element list
    or the layout editor in Screen Painter.
    You must program your screen modifications in a module that is processed during the PROCESS
    BEFORE OUTPUT processing block.
    You use a loop through the table SCREEN to change the attributes of an element or a group of
    elements. (LOOP AT SCREEN WHERE . . . and READ TABLE SCREEN are not supported).
    To activate and deactivate attributes, assign the value 1 (active) or 0 (inactive), and save your changes
    using the MODIFY SCREEN statement.
    Note that elements you have defined statically in the Screen Painter as invisible cannot be reactivated
    with SCREEN-ACTIVE = 1. Instead, use the statement SCREEN-INVISIBLE = 0. However, elements
    that you have statically defined as visible in the Screen Painter can dynamically be made invisible. This
    has the same effect as the three statements SCREEN-INVISIBLE = 1, SCREEN-INPUT = 0, SCREENOUTPUT
    = 0.
    There are three steps involved in displaying buffered data from the internal table in the table control:
    The system loops through the lines of the table control on the screen. The lines of the screen table are
    processed one by one. For each line, the system carries out the following steps:
    The current line of the internal table is placed in the work area of the internal table. (Note that it is
    possible to scroll in the table on the screen).
    The data from the work area of the internal table is copied into the relevant line of the table control.
    When you use table controls on a screen, the automatic field transport sequence changes.
    In the PBO processing block, data is transferred from the ABAP program to the screen after each loop
    pass in the flow logic. The rest of the screen fields are filled, as normal, at the end of the PBO.
    In the flow logic, the loop statement
    LOOP AT <itab> INTO <wa_itab> WITH CONTROL <tc_name>
    starts a loop through the screen table, and reads the line of the internal table corresponding to the
    current line of the screen table, placing it in <wa_itab>.
    <itab> is the name of the internal table containing the data, <wa_itab> is the name of the work area for
    the internal table, and <tc_name> is the name of the table control on the screen.
    If the fields in your table control have the same structure and name as those in the work area <wa_itab>,
    the system can transport data between the ABAP program and the screen automatically (step 3).
    If you are not using the same structure for the table control fields and the work area of the internal table,
    you must call a module between LOOP and ENDLOOP that moves the data from the work area
    <wa_itab> into the screen fields (MOVE-CORRESPONDING <wa_itab> TO …) .
    The system calculates the value of <ctrl>-TOP_LINE when you scroll, but not when you scroll a page at
    a time outside the table control.
    In order to transfer changed values from the table control back to the internal table the following three
    steps must be carried out:
    The system loops through the lines of the table control. The lines of the screen table are processed
    one by one. For each line, the system carries out the following steps:
    The data from the current line of the table control is copied into the header line of the internal table.
    The data in the work area must then be placed in the line of the internal table corresponding to the
    line of the table control that is being processed. (Note that it is possible to scroll in the table on the
    screen).
    In the PAI processing block, all screen fields that do not belong to a table control and that are not listed
    in a FIELD statement are transported back to the work fields in the ABAP program first.
    The contents of the table control are transported line-by-line to the corresponding work area in the ABAP
    program in the appropriate loop.
    As usual, the fields that occur in FIELD statements are transported directly before that statement.
    The structure of the screen tables contain.
    NAME
    GROUP 1
    GROUP 2
    GROUP 3
    GROUP 4
    OUTPUT
    REQUIRED
    LENGTH
    INTENSIFIED
    INVISIBLE
    ACTIVE
    Hope this helps, Do reward.
    Edited by: Runal Singh on Mar 13, 2008 10:41 AM

  • Golden gate missing checkpoint table

    Hello gurus,
    I am trying to implement live replication with Golden Gate but I can't create the checkpoint table.
    GGSCI () 26> ADD CHECKPOINTTABLE
    ERROR: Missing checkpoint table specification.
    GGSCI (q) 27> ADD REPLICAT rep1, EXTTRAIL /t01/software/gg2/dirdat/rt
    ERROR: No checkpoint table specified for ADD REPLICAT.
    GGSCI () 28> ADD CHECKPOINTTABLE
    ERROR: Missing checkpoint table specification.
    GGSCI (qcdvap1031.gnet.qc.bell.ca) 29> edit ./GLOBALS
    ERROR: Invalid command.
    GGSCI () 30> edit params ./GLOBALS
    GGSCHEMA GGS_OWNER
    CHECKPOINTTABLE GGS_OWNER.CHKPTAB
    GGSCI (q) 31> ADD CHECKPOINTTABLE GGS_OWNER.CHKPTAB
    Successfully created checkpoint table GGS_OWNER.CHKPTAB.
    GGSCI () 32> ADD REPLICAT rep1, EXTTRAIL /t01/software/gg2/dirdat/rt
    ERROR: No checkpoint table specified for ADD REPLICAT.
    Not sure what I am missing here, can anyone please help?
    Thank you very much,

    Hi,
    Use the CHECKPOINTTABLE parameter in a GLOBALS parameter file to specify the name of a
    default checkpoint table that can be used by all Replicat groups in one or more Oracle
    GoldenGate instances. All Replicat groups created with the ADD REPLICAT command will
    default to this table unless it is overridden by using the CHECKPOINTTABLE option of that
    command.
    To create the checkpoint table, use the ADD CHECKPOINTTABLE command in GGSCI.
    Regards,

  • Function module to get structure of DDIC table

    Hi everyone,
    Is there any SAP standard function module to fetch the structure of DDIC table ?
    Thanks in Advance

    HI,
    Go thru this link
    http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
    Thanks
    Sunil

  • Customization for register id 000 missing in table Registrations

    Hi all,
    when iam creating (factory sales)excise invoice in j1iin from billing document the error comes as:
    Customization for register id 000 missing in table Registrations
    Message no. 8I303
    Diagnosis
    The customization details have not been maintained for this company
    Procedure
    Please use the localization IMG or Global settings
    to maintain the company settings
    Please help me out.....
    Thanks
    Parin

    Hi Parin,
    Please follow the menu path as below and maintain the settings for the plant of your company code:
    SPRO, Logistics - General, Tax on Goods Movements, India, Basic Settings, Maintain Excise Groups
    Hope this solves your problem.
    Regards,
    Sreekanth....

  • Structure of setup table

    Hello
          can anybody tell me how can i check the structure of a setup table.Is it "extract structure" or the "comm structure" in R/3 side.
    Regards
    Tarun Khurana

    Hi,
    LIS Setup-Tables are defined as cluster tables in the database, so technically the structure is always a generic key plus a data cluster. You cannot access this table via normal SELECT or via transaction SE16.
    Within the data cluster the data is stored in the format of the extract structure. The table name is also derived from the extract strucuter: 2LIS_11_VAITM has extract structure MC11VA0ITM and setup table MC11VA0ITMSETUP.
    Regards
    Stephan

Maybe you are looking for