Structure not yet maintained for this combination of characteristics

Hi,
I have crated infor structure, maintained parameter. Created planning hierarchy also.
When I use transaction MC93 to create flexible plan, I am getting error message ""Structure not yet maintained for this combination of characteristics""
Please suggest to overcome this issue.
thanks and regards
murugesan

Dear Murugesan,
could you elaborate (explain in more detail) about the step you do to fix this issue?
right now i am encountering the same problem?
Thank you in advance for your help.

Similar Messages

  • Accounting data not yet maintained for material 2010 R-1130-40

    Hi Guys
    I was trying to post a goods issue, but having a error that says -
    accounting data not yet maintained for material 2010 R-1130-40
    I then tried MM02 to maintain the accounting view, but also having an error that says -
    accounting 1 not active for the organizational level.
    Any ideas please as to what to do.
    Chears
    Kofiyahya

    Extend the Accounting view with Tcode :MM50
    Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
    Regards,
    Ramesh

  • Materail not fully maintained for this transaction/event

    Dear All,
    When i am extending material to new storage Location using MMSC i am getting below error msg.
    "materail not fully maintained for this transaction/event" wht may be the reason.
    regards
    venu gopal

    Hi
    Check whether material has plant level data ie:any views like MRP, purchasing .
    i suppose if material has only basic data 1 and 2 then u may get the below error.
    Chk and revert
    Reg
    Raja

  • Attributes not yet maintained for process chains

    Hii All,
    when tried to load 0VENDOR master data from R/3 using process chains the chain failed and the error says "attributes are not maintianed" but when we checked the attributes ,they are all defined and in active state .so what might be the possible cause of error and how to fix the issue?.
    thanks in advance

    Hi Jayakrishna,
    Have you tried loading 0VENDOR simply from an InfoPackage...does that work?

  • Service/Maintenace Order type ZMSO not completely maintained for plant SE50

    Hi All,
    Am trying to create a Service Order with T.Code IW31 and after entering the order type, priority, Llyods code, Plant and Bus.Area and press enter I got error " Service/Maintenace Order type ZMSO not completely maintained for plant SE50 "
    Diagnosis:
    For the selected order type and plant, no check control is maintained in
    Plant Maintenance/Service in 'Availability Check for Materials, PRTs and
    Capacities'.
    Procedure
    A check control must be maintained for this combination of order type
    and plant.
    Please suggest me what should I do in this case as my knowledge in CS is zero.
    Awaiting your replies,
    Thanks in advance,
    Regards,
    Anil.

    Hi Anilku,
    Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Assign order types to maintenance plants.
    Maintain the order type ZMSO against the plant.
    Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Completion confirmations --> Define the parameters for completion confirmations.
    Thanks,
    Swamy H P

  • No organisational structure maintained for this item

    I am trying to create a shopping cart in SRM 4.0 front end and i keep getting the error no organisational structure maintained for this item. the purchasing group is not being picked up.I will greatly appreciate your help in solving this issue.
    thank you

    Hi Guys,
    Well... I think I have found the cause of the problem.  But I dont know how to solve it.
    In my Org Model, "Extended Attributes" tab, "Product Categories" option selected.  In that place I need to assign my Backend as the Src. System, and then choose my Product Category.     
    The problem is that I dont have any category linked to my backend system.    Because If I choose my SRM as the Src. System, I can see all the product categories that I have created.
    Somebody knows how can I link my Product Categories to my backend?   
    pd: my current categories were created manually in srm (not imported from r3)
    THANKS FOR YOUR HELP GUYS !!!!!!
    Regards,
    Diego

  • Please help: Message no. M7090/Accounting data not yet maintained

    To whom it may concern-
    I am currently a student attending LSU working on an SAP project worth a very significant portion of our grade. The following is a detailed description of the problem, which should hopefully help you put your finger on a solution.
    My problem is that when I try to hit the accept button on PP10 for a goods issue, I get an error message "Accounting data not yet maintained" (please refer to attached screenshot #1). When I click the help button, I get a vague solution (please refer to attached picture #2). I have tried and "change" my material master record for Cushion 065 by going back to MM06/create material master for trading goods (please refer to attached picture #3), but I don't have the understanding of SAP to manipulate the information at this point. It is just giving me the ability to manipulate views and it is only letting me choose the following views (please refer to attached picture #4).
    Please help me find a more useful pathway so I can proceed. If whoever is helping me needs me detailed information, please let me know. Also, if someone could direct me to a user support function where I can talk to a representative in real time, I would appreciate that.
    Mack Bradford

    Extend the Accounting view with Tcode :MM50
    Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
    Regards,
    Ramesh

  • Error RSM006 "Attributes are not yet maintained"

    Hello everyone, I have had a problem with two infopackages,  one of them has the 0COORDER_TEXT datasource and the other 0COORDER_ATTR datasource. When I run the process chain with these infopackages, I have the error RSM006 "Attributes are not yet maintained", if I try to change these infopackages with the RSA1 I have the same error.
    Do you have any suggestion to solve this problem?
    Thank you very much.
    Best Regards
    Maximiliano Valin

    Thank you, I check your recommendation and I found everything ok, the 0COORDER is ok and active, and the tranfer rules are ok and active too, I don't know what other thing could be the problem.
    This is the help message that appear when the error happens.
    Attributes are not yet maintained
    Message no. RSM006
    Diagnosis
    The attributes have either not yet been created or activated.
    The data cannot be taken from the source system without maintained attributes. Therefore, this data request is not possible.
    Procedure
    Maintain the attributes for this master data-InfoSource in the Administrator Workbench and then activate them.
    Thank you for everything.

  • Process chain termination - Attributes are not yet maintained

    Hi Experts ,
    I am running a process chain in the production system , which is failed , however the below objects in the chain is completing successfully.
    Please see the below msg descriptions
    Attributes are not yet maintained
    Entire chain now has status 'R'
    Process Start Process, variant Technical InfoObjects Attribute Load has status Undefined
    Process Execute InfoPackage, variant InfoPackage has status Undefined ...
    Process Execute InfoPackage, variant BW Systems has status Undefined
    Process Execute InfoPackage, variant InfoSource has status Undefined
    Process Execute InfoPackage, variant InfoCube has status Undefined
    Process Execute InfoPackage, variant Application Component has status Undefined
    and many things which are undefined ..
    Have nay one come across this issue , how to resolve this ?
    Thanks

    Hi,
    Is there any changes done for the respective IP's/objects used in the chain recently. It might be the cause and before running jst test the chain using CHECK option and accordingly redesign, activate and schedule the process chain,
    rgds,

  • " . . . product is not yet supported by this online service"

    I need support for my new iMac and get this when entering my serial number: " . . . product is not yet supported by this online service." Please tell me what went wrong and how to get support. I chatted with them yesterday and we did a restore. Since it took a couple of hours, I thought that I would return today to finish the issues.

    I need support for my new iMac and get this when entering my serial number: " . . . product is not yet supported by this online service." Please tell me what went wrong and how to get support. I chatted with them yesterday and we did a restore. Since it took a couple of hours, I thought that I would return today to finish the issues.

  • Fiscal year change not yet made for company code

    1. We have opened new company and enter data from FY 2009. All posting has happened properly, but when we are trying to see report S_ALR_87011963 we are facing following problem.
    We have already check everything on SDN and followed, but our problem still exists.
    Table T093C is showing as FY 2009 year and also same in OB52, OAAQ is showing 2008 as closed year. We have run AJRW for 2009 and it runs successfully.
      error -
    Fiscal year change not yet made for company code ABCD
    Message no. AB059
    Diagnosis
    You have not yet carried out a fiscal year change for company code ABCD, although the current system date is in the new fiscal year.
    Procedure
    Carry out the fiscal year change for company code ABCD.
    2. We are running AFAB in any mode we get following error.
    Only an unplanned posting run is possible in this fiscal year.
    Message no. AA693
    Diagnosis
    You have already posted in fiscal years that come after 2009.  This means that you can only post in the last posting period 012 in fiscal year 2009. Or you can post to a special period, if one is set up. Since you have not posted yet in this fiscal year, you must specify that the depreciation posting run is unplanned.
    Procedure
    Please check the fiscal year entered.  If you are certain you want to post to fiscal year 012, you must start the depreciation posting run in the last posting period (or in the special period).  Be sure to indicate that this posting run is unplanned, since it falls outside of the normal posting cycle.

    Hi Experts,
    I am not making a new post regarding this but I hope you can help me answer.
    I am experiencing the same issue as the one posted originally and here are my data.
    1. Running the same asset report
    2. System is currently in FY 2013
    3. OAAQ shows FY 2012
    4. SE16N > T03C shows FY2013
    I have tried running AJRW again but I am getting the same error in the asset report. I hope someone out there can help.
    Thanks,
    Josef

  • Fiscal year change not yet made for company 1234

    While executing the T-code S_ALR_87011963 (Asset balances report) reporting year : 31.12.2009, am
    getting the below error u201CFiscal year change not yet made for company
    code 1234u201D
    1)      In T-code OAAQ, For company code 1234 closed fiscal year is 2008.
    2)      Thru F-90, I can post the acquisitions in year 2009.
    3)      Fiscal year 2009 is already opened, while running the reports why
    this error message is showing u201CFiscal year change not yet made for
    company code 1234u201D
    4)      I have to get the reports for closed fiscal years, am not getting
    any reports for fiscal years 2006,2007,2008.
    Please post your comments.
    Thanks,
    vinay

    Hi,
    Please give me below mentioned details.
    1) What is the year showing in OAAQ ?
    2) Which year you have opened in AJRW ?
    Best Regards,
    Madhu

  • Database is not yet configured for monitoring  in DB02

    When i goto transaction DB02,  it says 'Database is not yet configured for monitoring".    Its asking for the location of UDF Path name.   What do I set this too, what is the file name, don't see anything which states what this should be.

    Follow note 595689 - DB6: Error SQL0443 'Permission denied' in DBA Cockpit
    Markus

  • Fiscal year change not yet made for co. code

    hi,
    while viewing the asset balance report, system is throwing 'fiscal year change not yet made for co. code'. However in T.code AJAB, system is showing no error in log. While executing in background & checking in sm37, in spool the system showing 'dep. not done completely for an asset'. However, the asset is AUC & in master data the dep. key is 0000.
    Kindly help me out as it is very critical because user cannot able to post it.
    Regards,
    surendra

    Hi
    Even though you finished the AJRW, you need to change the Date of Legacy Data Transfer in this view
    V_T093C_08  (Please use SE11 transaction code -
    select view radial button and give this view V_T093C_08   and select display -
    execute accordingly  ex: 31/12/2008 for 2009 )
    Let me know for any issues
    Regards,
    Suresh

  • Account owner is not BP maintained for the global ultimate

    Hi,
    I am getting the error "This account owner is not BP maintained for the global ultimate" while saving the opportunity.
    How do I resolve it?
    Chaitra

    Simply check if Account Onwer is maintained in the Account of the Opportunity

Maybe you are looking for