Structure to be maintained in proxy to jdbc scenario

Hi all ,
There is a field Flag ,which receives the value from the database table.if the flag value is 0 then nothing should be done ,if the flag value is 'S' then the correspong record must be removed from the JDBC data base table.
I am already using the action UPDATE_INSERT for over writing the existing record.
In the ztable ,I am maintaing a zield Flag(change indicator).If this change indicator is S then, record must be deleted from jbdc.
How to maintain jdbc structure .
Thanks,
Srinivasa

Can I use structure as this one?
Target->Statement->Attachments-
action=UPDATE_INSERT
table=Mytable
->access-
Field1
Field2
Field3
Field4 ->
<Statement>
<Mytable action=u201DDELETEu201D>
<key1>
<Field1>S</Field1>
</key1>
</Statement>
Here I am using both Update_insert and Delete operations on same table.
Thanks,
Srinivasa

Similar Messages

PROXY TO JDBC scenario

Hi All,
I am working on PROXY to JDBC scenario upto yesterday its working fine.
Today I, am getting "Time limit exceeded" error in QRFC monitoring and message showing with GREEN COLOUR FLAG (RECORDE) in PI SXMB_MONI.
Please help me to salvoes this error.
Thanks and Regards,
MFH

Hi All,
First of all thanks for all your early replays....
"TIME LIMIT EXCEEDED" QRFC Problem is indicates that when we processing large volume of messages to external or internal systems in this case specified time limit in SM59 is not enough to process the message so that please increase TIMEOUTS...TIME LIMIT EXCEEDED error will be solved.
With Regards,
MFH

Two Receiver DB in Synchronous Proxy to JDBC Scenario?

Hey,
Is it possible to develop a synchronous proxy to JDBC Scenario that have two different DBs as Receiver?
The response Datas are insert_count and update_count.
Thank.

Park,
You can't have more than one receivers in Sychronous case. If you designed the scenario , then u will get the error as "TOO_MANY_RECEIVER CASE_BE".
-raj.

Proxy to JDBC scenario need dynamic sql query for sender .

Hi Experts,
I am developing proxy to jdbc scenario. in this i need to pass dynamic sql query whre we are passing classical method like below.
while we are passing select stmt in constant and mapped with access field and key field mapped with key field.
MY requirement is like instead of passing select stmt in constant where i can generate dynamically and passed in one field and mapped with access field.

Hi Ravinder,
A simple UDF or use of graphical mapping functions in most cases should provide you everything you need to construct a dynamic SQL statement for your requirement.
Regards,
Ryan Crosby

Data coming in receiver side by using proxy to jdbc scenario

Hi experts ,
I have scenario Proxy (client proxy) to JDBC (IVR system) Asynchronous method,
I execute se38 its working fine and go SXMB_MONI here also success flag in development server same way I checking PI side also SXMB_MONI everything fine but data not coming IVR side if write select query
In runtime workbench the Communication channel status id green and Message processing completed successfully
My question is when I writing select query like select * from table name ,Why data not coming receiver side ? execute query here IVR side also mention query status is successfully ,but IVR side data not coming, I have access right in receiver side
Please provide valuable inputs.
Thanks
INASH NALLA

Refer the following link for more details:
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Also, in the reciever JDBC adapter you dont write a SQL query anywhere but it is the target MT structure and corresponding mapping,which generates the query.
Refer the blog:
http://www.riyaz.net/blog/jdbc-adapter-configuration/technology/ 1200/

Performance issues in Proxy-XI-Jdbc scenario

Hello,
I have developed a proxy to JDBC synchronous scenario.
My scenario works like this.
*i run an abap program which calls a client proxy,
the proxy fetches the data from database table and returns the data in the ABAP program.(select query)
there are serious performance issues when we are running the report
it is taking around 2-5 minutes and at times multiple users are logged in , it takes around 5-20 minutes.
it seems that most of the time is consumed in the data fetching.
please help me to find some solution so that we can fine tune the performance on the PI side.
Are there any options on JDBC CC which can help us in making the queries faster
thanks
kannu.

Kanu16 ,
Issue seems to be at r/3 end..
1. Make sur ethat report program is using select query in proper fashion .
2. avoid using nested loops.
3. Hope not much validations are being done on selected data .
Abaper can help you optimizing this .
By debugging you can find out the exact reason behind.
Regards ,

An error Handling in Asynchronous Proxy to JDBC Scenario?

Hey,
In my scenario, we'll send data from erp to third-party database.
If it occurred an error while saving the data to database, I want to manage that error in ERP.
Is it possible to make this scenario with asynchronous proxy to JDBC?
If it was possible, how should do I?
Thank you,

Also
go thru the following thread (Similar problem discussed)
Re: RFC to JDBC response
regards
krishna

Proxy to JDBC scenario data to be fetched from two dB

Hello all,
we have a requirement in which the data is sent from an abap program and using PI it will fetch the data from DB at client side,
and we need to display the data in the report program.
As we need the real time data and need to be displayed back in the Report program the processing time should be less than 30 sec.
We have tried the scenario using synch Proxy-synch jdbc and we are getting the data with in time but we tried this with 1 DB.
But now we have requirement change and we need to look the data in 2 Data bases.
we need to pass data through client proxy(Synch) to PI and it should check the data in 2 DB and send back the data.
the data sent back from the DB, we need to show in our ABAP program.
Please send in your inputs so that i get some pointers regarding this requirement.
Thanks
Karandeep Singh

HI Vijayashankar,
Thanks for your reply.
Please brief me the steps for using fork in BPM.
Thanks
Karandeep Singh.

Reg. Client(ABAP) Proxy to JDBC scenario

Hi All,
I am working on a scenario of Proxy to JDBC. The scenario goes like this.....
SAP is the sender and I need to fetch data from the database table at the R/3 end and update in the legacy system at the receiver end .
Can anybody guide me apart from PI configuration, the settings need to be done at the R/3 end in the transaction sproxy i.e. the ABAP class and objects. Also let me know if I need to trigger the interface weekly once, is it possible to trigger it automatically by using ABAP class and objects else I need to write an ABAP program in order to trigger the interface.
Thanks for understanding in advance.
Regards,
Neethu Chordia

Hi,
Can anybody guide me apart from PI configuration, the settings need to be done at the R/3 end in the transaction sproxy -
As Raj suggested please search on SDN, you will find lot of links on this.
Also let me know if I need to trigger the interface weekly once, is it possible to trigger it automatically by using ABAP class and objects else I need to write an ABAP program in order to trigger the interface. -
>For this you need to write Abap class program and override method "Execute asynchronous" this will send the SAP R3 data to XI and then you have to configure job on R3 to run this program periodically as per your requirement.
Divyesh Vasani

ABAP Mapping for Error handling in Proxy to JDBC

Hi All,
I am working on a proxy to jdbc scenario in which we have to throw validation errors to NWPM(Net Weaver Process Monitor Tool)
I am following the below steps,
step 1 - In message mapping a UDF is created to catch errors and store them in a variable using dynamic configuration
step 2 - writing abap mapping for handling this thrown exception and im reading the dynamic configuration in the abap class and raising exception. The exception format expected is
SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1>ZPI_THROW_EXCEPTION</SAP:P1>
<SAP:P2>001</SAP:P2/>
<SAP:P3>Mandatory field is missing[BUKRS] </SAP:P3>
   <SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have written the following ABAP code to achieve this:
method IF_MAPPING~EXECUTE.
DATA l_record type mpp_dynamic.
DATA error type String.
getting dynamic configuration value
filled in by any previous mapping
CALL METHOD DYNAMIC_CONFIGURATION->GET_RECORD
EXPORTING
    NAMESPACE = 'http://sap.com/xi/XI/System/ERROR'
    NAME      = 'ERROR'
RECEIVING
    RECORD    = l_record.
error = l_record-value.
*raising exception with our message
RAISE EXCEPTION TYPE CX_MAPPING_FAULT
EXPORTING
   TEXTID =
   PREVIOUS =
    ERROR_CODE = '001'
    ERROR_TEXT = error .
RAISE EXCEPTION TYPE CX_MAPPING_FAULT
EXPORTING
   TEXTID =
   PREVIOUS =
    ERROR_CODE = '003'
    ERROR_TEXT = error .
endmethod.
I am gettign the following message for our code:
SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Could you please help in finding the solution for getting currect error message from ABAP class?
Edited by: SwethaC on Jan 21, 2011 8:18 AM

The error is due to RFC Call fail from PI system to your ECC Application System.
Check your RFC Destination for ECC System type 3 in PI System.
When you are receiving data from ECC System using Proxies & again you are going to ECC System for Validation.
Why you are not doing this validation on ECC System only in your proxy code ?
In your proxy code, it will be much better for performance to check your data there on same system.

No response message in Proxy to JDBC synchronous scenario

Dear Team,
I am working on synchronous scenario Sender ABAP proxy <===> SAP PI 7.31 <===> Oracle Database.All the necessary proxy configuration has been successfully tested.
Business Scenario:
ABAP proxy will send a single Vendor Id to Oracle DB as request and in return , it has to retrieve all the columns related to Vendor as response.Oracle Database stores all the Vendor information.There are 11 columns including the vendor Id in the view for the Vendor records.
Design :
For Request structure:
a-->Created MT for Sender ABAP Proxy with only 1 field for Vendor Id.
b-->Created MT for Receiver JDBC with Action as SELECT , Table with "View Name" , Access with Constant Blank for all 11 column and Key as Vendor Id.
I have been following the link and Bhavesh Kantilal document.
http://help.sap.com/saphelp_nw73/helpdata/en/44/7b7171fde93673e10000000a114a6b/content.htm?frameset=/en/44/7b7855fde93673e10000000a114a6b/f
rameset.htm&current_toc=/en/ca/b977f1c7814201954f20bb87ad7aab/plain.htm&node_id=71
For Response structure:
Created MT for Receiver JDBC with All the column names.
Created MT for target ABAP ECC with the same 11 column name of JDBC response.
Note :
1.Database team shared a excel file as a sample payload which has all the column names of a vendor and I created my DT with the same naming conventions as they are maintaining in their database i.e. Column names are in CAPs, in the same order and even the special characters in the column name.
2. The PING test connection for Cc works fine to database.
Please read out my queries as the I am not receiving any response from Oracle DB and gives error as timeout exception:
1.Since I am trying to retrieve all the column of the view , am I doing the correct procedure of putting all the column name in the JDBC request structure and making a Select statement. Can I add < * > to fetch all the column name and if so where can I add it.
2. Whats the difference between SELECT and SQL_QUERY and on what circumstances I can add it?
3. How can I test ICO in ID?
4. Can I use any SOAP tool to test the messages? Is there any functionality in NWA to test the messages directly to JDBC .
Hope all your inputs can improve my design part.
Regards
Rebecca

Hi Rebecca,
Did you go through all of these links below?
PROXY to JDBC- SYNC
Proxy to JDBC Sync, with Idoc Receiver
JDBC to PROXY Sync Scenario | SCN
JBDC Receiver Insert Statement Response
Re: Synchronous JDBC select
receiver JDBC structure
Regards,
Jannus Botha

Sender ABAP Synchronous proxy -- PI -- JDBC sync scenario pls!!

Hi Guys,
Can any one help to find one sample scenario like ABAP Proxy --> PI --> JDBC Sync call ? Sync ABAP proxy sample code any 2 or more filelds going from ABAP proxy and maps on JDBC sync request, up date target side SQL server database tables, in case if any error happens error/success message must go back to SAP one Z table with response.
Any help would be really great!!
Many thanks in advance
San

up date target side SQL server database tables, in case if any error happens error/success message must go back to SAP
one Z table with response.
When you do an update you can get back the number of rows updated in the JDBC response....you can find this in the help page showing JDBC structure. If you are looking for any other response then probably the message needs to be genarated by PI itself after checking the response from JDBC.
Regards,
Abhishek.

Proxy to JDBC- Array mapping

Hi,
In my scenario Proxy to JDBC - synchronous call.
In the receiver side using JDBC adapter a stored procedure is invoked and that returns some values say... IndentNumber,EmployeeNumber and ResumeNumbers (Which is array type.), Status(which is again array) -- ResumeNumbers may have multiple resume numbers and status has status flag corresponding to each resume.
How do I go about this in XI mapping.
Please guide me on this.
Regards,
chem
Edited by: Chemmanz on Mar 15, 2008 3:39 PM

Hi,
For this you need to make the occurance of the proxy structure as 1...unbounded.
If the fields have to mapped then make the Unbouded occurance and map it as it is.
OR for mulitple records....
For e.g.
Your JDBC side structure will be as
<root>
<StatementName5>
<storedProcedureName action= EXECUTE>
<table>realStoredProcedureeName</table>
<param1 [isInput=true] [isOutput=true] type=SQLDatatype>IndentNumber</param1>
</storedProcedureName >
</StatementName5>
</root>
Here make the occurance of IndentNumber as Unbounded so you will get whole array.
Now On Proxy side make the related structure and try to map the any one internal field i.e. array to root node
i.e. if proxy structure is
<root>
<IndentNumber></IndentNumber>
</root>
Then map JDBC response field IndentNumber -
> Root
This will create the multiple records for proxy.
Then all fields map as one to one mapping
IndentNumber (JDBC)->splitByValue>IndentNumber (Proxy)
Thnaks
Swarup

ABAP Proxy to JDBC syncronous method

Hi Experts,
I am very new to ABAP Proxy to JDBC syncronous method.
I have used 4 DT, 4 MT, 2 MI, 2 MM and 1 IM.
I have used reference from
SYNCHRONOUS SOAP TO JDBC - END TO END WALKTHROUGH
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3928. [original link is broken] [original link is broken]
My question is in Integration Directory how many sender agrement, receiver agrement, receiver determination and interface determination should i use?
Is my above DT , MT , MI , MM and IM is correct?
I am not using any BPM.
Thank you in advanced.
regards,
S.Saravannan

mrsaravannan wrote:
> My question is in Integration Directory how many sender agrement, receiver agrement, receiver determination and interface determination should i use?
for a Sync sceanrio, you will create
1 RD
1 ID
1 SA (since its a ABAP proxy call this is optional)
1 RA
>
> Is my above DT , MT , MI , MM and IM is correct?
Yes

BPM flow Proxy to File and then Acknowledgement back to Proxy or JDBC.

hi All,
I have to create an BPM scnario to get acknowledgement from receiver file adapter.
Steps created in BPM are:
receive -> send (Transport Acknowledgement is selected) as per blog /people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
Now what i want to do is whenever any type of acknowledgement is obtained i need to send success or failure message to proxy or JDBC(have alreay seen how to request for acknowledgements through client proxy).
What i need to do in order to achieve this scenario?
Thanks,
Mayank

hi,
If we are getting exception for some reason and error text as visible in moni for example is:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while retrieving an FTP connection from the connection pool: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
Is it possible to capture Additional Text somewhere in BPM, so that in case if deadline limit is exceeded we can send exception text back to the sender?
thanks.

Structure to be maintained in proxy to jdbc scenario

Similar Messages

Maybe you are looking for