Structure urgent plz

Hi all,
I am using the key figure sturcture in the rows for some RKF on amount,
At the same time i am having another  requirement where I hav to restrict the data on the every month from jan - dec and also hav to calculate the value for every quater. I am planning to make use of Variable offsets hope it will work fine.
For this I am creating the structure where i am going to restrict year on year1,.....year12.
Is my process is fine.Does any other changes are required.
Plz let me know
Regards

hi KK
what you can try is
create a structure in row where you insert  selections
1st selection include 0CALMONTH restrict on january
2nd selection include 0CALmonth again and restrict on february
etc... till December
Then insert a fromula for the first quarter with 1st selection + 2nd + 3rd
The same for 2nd quarter with 4th selection, 5th, 6th
etc...
You can include a variable to determine year to be applied on the RKF
Otherwise you can put a variable that dtermines the actual calmonth on the fisrt selection (meaning you have 12 sliding months) and deal with offsets as you mentionned.
hope this helps.
regards
Boujema

Similar Messages

  • How to install adapters in pi 7.0 ex(tibco adapter) its urgent plz help

    hi  friends
                   can any one help me how  to insatlll  the tibco adapter in pi 7.0 its urgent plz help
    thanks in advance
    bye
    raja

    Hi Raj,
    Is  your Sender System  Tibco If  so  Use  JMS Adapter  to get  the Data from tibco  and Use  IDOC  Adapter  to Post  in R3. For this you no need to Install any Adapter in XI System.
    Similar discussions ,
    XI integration with Tibco
    XI Integration with Tibco EMS (Using JMS Adapter)
    Regards
    Agasthuri Doss

  • How to restrict key board function keys ex:-F10 in forms 6i.urgent plz..

    how to restrict key board function keys ex:-F10 in forms 6i.urgent plz..

    Hi,
    At Form level, write trigger for WHEN_KEY_DOWN, check for F10 and put action as NULL.
    Regards,
    Amol

  • How to restrict fuction keys ex:-F10 in forms 6i.urgent plz..

    how to restrict fuction keys ex:-F10 in forms 6i.urgent plz..

    If F10 is the Save button, than just simply program key-commit as:
    begin
      null;
    end;BTW: never say URGENT here on the forum. It is considered very impolite!

  • Trre like structure in JComboBox. (VERY VERY URGENT , PLZ. HELP)

    hi,
    Question is I want to get a tree like structure in my comboBox. I have built a custom component just like FileDialog. In my comboBox I have a directory showing that inturn contains directories inside. When I pop up my component my parent directory is shown in the comboBox and the child directories are shown in the panel underneath it. Just like FileDialog. When I select any child directory it's name is added under the parent directory and indented to the right a little in my comboBox and in my panel the child's sub-directories are shown. If I again click a parent directory in my comboBox the chiild directory is removed and in the panel again my parent directories child directories are shown it's just like FileDialog. How can i achieve this functionality. Any help or piece of code is appreciated
    Thank you

    I am kind of guessing here, but this sounds like a
    similar problem to that you'd have implementing a
    treetable.
    Check out the sun treetable tutorial, especially the
    cell renderer parts wich is really how the tree is
    displayed.
    I guess you need to replicate that for your list (part
    of the combo box). Let me know how you get on, I'll
    try and work with you on this as I'd like to learn how
    to do that myself.For a real tree table, check out the Swing Connection articles (it's about more that this renderering problem).
    http://java.sun.com/products/jfc/tsc/articles/index.html
    Anyway, for this problem, there are two solutions. Somehow draw a JTree when the drop down is clicked instead of the individual rows (I have no clue how to do this) or develop a new renderer.
    The renderer would implement ListCellRenderer. The default renderer is based on a JLabel, but I know of no method to indent the JLabel by itself, so option 2 is a new renderer based on a JPanel with a flow layout with left alignment. The indentation can be achieved by adjusting the horizontal gap.of the layout.
    You might also need to call invalidate(), followed by validate(), on the panel after adjusting the gap. This is because modifying the constraints on the layout does not cause it automatically to re-layout the components on the container.

  • Urgent Plz reply: java.lang.Class not found exception

    Hi All,
    I am novice to j2me, I am tryiing communicate data between client and Java server. I have given project name client and midlet class name FileViewer.java.
    It is compiling succesfully
    but when I run it , it is giving error
    Unable to create Midlet FileViewer.java
    java.lang.classnot found excetption: FileViewer.java
    at com.sun.midp.midlet.selector.commandaction(+47)
    at javax.microedition.lcdui.Display$displayaccessor.commandaction.(+152)
    at com.sun.kvem.midp.lcdui.EmulEventHandler$eventloop.run(+459)
    Here is the code
    import javax.microedition.midlet.*;
    import javax.microedition.lcdui.*;
    import javax.microedition.io.*;
    import java.io.*;
    public class FileViewer extends MIDlet implements CommandListener
    private Display display; // Reference to Display object
    private TextBox tbViewer; // View file contents in a textbox
    private Command cmView; // Command to view file
    private Command cmExit; // Command to exit
    private String url = "http://www.corej2me.com/midpbook_v1e1/scratch/fileViewer.hlp";
    public FileViewer()
    display = Display.getDisplay(this);
    // Define commands
    cmView = new Command("View", Command.SCREEN, 2);
    cmExit = new Command("Exit", Command.EXIT, 1);
    tbViewer = new TextBox("Viewer", "", 250, TextField.ANY);
    tbViewer.addCommand(cmView);
    tbViewer.addCommand(cmExit);
    tbViewer.setCommandListener(this);
    public void startApp()
    display.setCurrent(tbViewer);
    private void viewFile() throws IOException
    HttpConnection http = null;
    InputStream iStrm = null;
    try
    // Create the connection
    http = (HttpConnection) Connector.open(url);
    // Client Request
    // 1) Send request method
    http.setRequestMethod(HttpConnection.GET);
    // 2) Send header information (this header is optional)
    http.setRequestProperty("User-Agent", "Profile/MIDP-1.0 Configuration/CLDC-1.0");
    // 3) Send body/data - No data for this request
    // Server Response
    // 1) Get status Line
    System.out.println("Msg: " + http.getResponseMessage());
    System.out.println("Code: " + http.getResponseCode());
    // 2) Get header information
    if (http.getResponseCode() == HttpConnection.HTTP_OK)
    // 3) Get data (show the file contents)
    iStrm = http.openInputStream();
    int length = (int) http.getLength();
    if (length > 0)
    byte serverData[] = new byte[length];
    iStrm.read(serverData);
    tbViewer.setString(new String(serverData));
    Alert alTest = new Alert("Alert Test", new String(serverData), null, null);
    display.setCurrent(alTest);
    finally
    // Clean up
    if (iStrm != null)
    iStrm.close();
    if (http != null)
    http.close();
    public void pauseApp()
    public void destroyApp(boolean unconditional)
    public void commandAction(Command c, Displayable s)
    if (c == cmView)
    try
    viewFile();
    catch (Exception e)
    System.out.println(e.toString());
    else if (c == cmExit)
    destroyApp(false);
    notifyDestroyed();
    If some body has knowledge why this error is coming plz share wiht me Its urgent .
    Thanks in advance.
    Thanx

    No, the "-g" version just means it has the debug flag turned on when they compile it.
    Your problem is CLASSPATH and how to set it properly.
    Use the -classpath option on java.exe when you run. Read the javadocs on the tools to find out how.
    %

  • Refreshing JEditorPane (Urgent) plz help

    hello programmers,
    i'm building an html editor:
    My html editor has a split pane, the 2 pane got of the split pane are JEditorPanes, one on which i write tag and the other i display them,... thankfully all's working great, my syntax is highlighting and the html is displayed well but i've got the following problem:
    when i save a html page , i wanna my browser (on the right side of the slipt pane) to display the html page... it's ok .. it displays it with the method JHTMLEditorPane.setPage(file:/// directory/ file) but the problem is that when i save the page again using the same filename... my html page on the JHTMLEditorPane stays the same... it does not update...
    is their a refresh function for the JEditorPane? how can i update my JHTMLPane to reflect the changes i've brought to it? ONe thing , the page changes when i save it by aother file name..... PLz help it's very urgent!!!!!!!
    Bernard

    Have you tried to close and then re-open the file in your editorpane after you've saved?
    It will work when you change the name because it has to open the file as new. Java can't dynamically update values upon files like C does with pointers.

  • Its urgent:plz tel me what is the steps move to produection oaf page.

    Hi All,
    I developed one oaf page.that page move to production.
    i already move to produection but its not working fine.
    its throw an error.
    plz tell me what is the steps follow when move to production.
    oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_NO_REGION_DATA. Tokens: REGIONCODE = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG;
         at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:529)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
         at oa_html._OA._jspService(_OA.java:85)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
         at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
         at oa_html._RF._jspService(_RF.java:102)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
         at org.apache.jserv.JServConnection.run(JServConnection.java:294)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    Exception:
    oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
         at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
         at oracle.adf.mds.MElement.findElement(MElement.java:97)
         at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
         at oa_html._OA._jspService(_OA.java:85)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
         at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
         at oa_html._RF._jspService(_RF.java:102)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
         at org.apache.jserv.JServConnection.run(JServConnection.java:294)
         at java.lang.Thread.run(Thread.java:534)
    Exception:
    oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
         at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
         at oracle.adf.mds.MElement.findElement(MElement.java:97)
         at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
         at oa_html._OA._jspService(_OA.java:85)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
         at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
         at oa_html._RF._jspService(_RF.java:102)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
         at org.apache.jserv.JServConnection.run(JServConnection.java:294)
         at java.lang.Thread.run(Thread.java:534)
    thanks
    Seshu.
    Edited by: its urgent on Feb 8, 2012 2:31 AM

    Deployement steps:
    1) Copy the Class files and move to into server
    We can get class file >>F:\OAF\jdevhome\jdev\myclasses\imp
    \myprojects
    (imp) Load into server (java TOP) >>D:\oracle\viscomn\java\
    2) Run the XML import Scripts in Command Prompt
    F:\OAF\jdevbin\jdev\bin
    For every Page and every Lov region
    3) Next Go to apps
    System administrator Create Function for a page
    Description tab:
    Function Name : IMP_STUDENT_REGISTRATION
    User Function Name: Imp Student Registration
    Description : Imp Student Registration
    Properties Tab:
    Type: SSWA JSP function
    WebHTML Tab
    Function:
    HTML call: OA.jsp?page=/imp/oracle/apps/po/student/webui/ImpStudentResitrationPG
    Note: DO the same for all the pages
    4) Attach these Functions to Imp Student Operations menu to Imp Student Operations responsibility to User.
    5) Bounce the apache.
    Regards
    Meher Irk

  • Urgent plz BDC

    hi gurus,
    i have a problem in bdc programm there is 3 screen using transaction f-27
    there is two amount field as(wrbtr,wrbtr2)
    two screen are run fine but the 3 screen does't take data automatically from flat file plz help me its urgent see my codes and give me solution.
    TYPES: BEGIN OF it_output,
           bldat(10)  TYPE  C,           "Document Date
           blart      TYPE  bkpf-blart,  "Document Type
           bukrs      TYPE  bkpf-bukrs,  "Company Code
           budat(10)  TYPE  C,           "Posting Date
           monat      TYPE  bkpf-monat,  "Period
           waers      TYPE  bkpf-waers,  "Currency
           xblnr      TYPE  bkpf-xblnr,  "Reference Field
           docid      TYPE  fs006-docid, "Document ID
           newbs      TYPE  rf05a-newbs, "Posting  Key
           newko      TYPE  rf05a-newko, "Account Code
           wrbtr(16)  TYPE  C,           "Amount in Document currency
           zfbdt(10)  TYPE  C,           "Baseline Date
           newbs2     TYPE  rf05a-newbs, "Account Key2
           newko2     TYPE  rf05a-newko, "Account code2
           wrbtr2(16) TYPE  C,           "Amount2
           END OF it_output.
    DATA lt_output  TYPE  it_output OCCURS 0 WITH HEADER LINE.
    DATA it_bdc     LIKE  bdcdata OCCURS 0 WITH HEADER LINE.
    DATA it_messtab LIKE  bdcmsgcoll OCCURS 1 WITH HEADER LINE.
                               D A T A                                   *
    DATA: message TYPE string.
    DATA: p_file1 type string.
             S E L E C T - O P T I O N S / P A R A M E T E R S           *
    SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME.
    PARAMETERS : p_file  LIKE rlgrap-filename OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK block0.
             A T  S E L E C T I O N - S C R E E N                        *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
        EXPORTING
          static    = 'X'
          mask      = space
        CHANGING
          file_name = p_file.
                   S T A R T - O F - S E L E C T I O N
    START-OF-SELECTION.
      PERFORM  upload.
      PERFORM  bdc.
      PERFORM  write_message.
    *&      Form  bdc
          text
    FORM bdc.
      LOOP AT lt_output.
        READ TABLE lt_output INDEX 1.
        PERFORM bdc_dynpro      USING 'SAPMF05A' '0100'.
        PERFORM bdc_field       USING 'BDC_CURSOR' 'RF05A-NEWKO'.
        PERFORM bdc_field       USING 'BDC_OKCODE' '/00'.
        PERFORM bdc_field       USING 'BKPF-BLDAT'  lt_output-bldat.
        PERFORM bdc_field       USING 'BKPF-BLART'  lt_output-blart.
        PERFORM bdc_field       USING 'BKPF-BUKRS'  lt_output-bukrs.
        PERFORM bdc_field       USING 'BKPF-BUDAT'  lt_output-budat.
        PERFORM bdc_field       USING 'BKPF-MONAT'  lt_output-monat.
        PERFORM bdc_field       USING 'BKPF-WAERS'  lt_output-waers.
        PERFORM bdc_field       USING 'BKPF-XBLNR'  lt_output-xblnr.
        PERFORM bdc_field       USING 'FS006-DOCID' lt_output-docid.
        PERFORM bdc_field       USING 'RF05A-NEWBS' lt_output-newbs.
        PERFORM bdc_field       USING 'RF05A-NEWKO' lt_output-newko.
        PERFORM bdc_dynpro      USING 'SAPMF05A' '0302'.
        PERFORM bdc_field       USING 'BDC_CURSOR' 'RF05A-NEWKO'.
        PERFORM bdc_field       USING 'BDC_OKCODE' '/00'.
        PERFORM bdc_field       USING 'BSEG-WRBTR'  lt_output-wrbtr.
        PERFORM bdc_field       USING 'BSEG-ZFBDT'  lt_output-zfbdt.
        PERFORM bdc_field       USING 'RF05A-NEWBS' lt_output-newbs2."newbs2
        PERFORM bdc_field       USING 'RF05A-NEWKO' lt_output-newko2."newko2
        PERFORM bdc_dynpro      USING 'SAPMF05A' '0301'.
        PERFORM bdc_field       USING 'BDC_CURSOR' 'BSEG-WRBTR'.
        PERFORM bdc_field       USING 'BDC_OKCODE' '=BU'.
        PERFORM bdc_field       USING 'BSEG-WRBTR'  lt_output-wrbtr2."wrbtr2
       PERFORM bdc_field       USING 'BSEG-MWSKZ' '**'.
       PERFORM bdc_field       USING 'BSEG-ZTERM' 'C007'.
       PERFORM bdc_field       USING 'BSEG-ZBD1T' '7'.
        CALL TRANSACTION 'F-27' USING it_bdc mode 'A'
                               MESSAGES INTO it_messtab.
        CLEAR it_bdc. REFRESH it_bdc.
      ENDLOOP.
    ENDFORM.                    "bdc
    *&      Form  write_message
          text
    FORM write_message.
      LOOP AT it_messtab .
        CLEAR message.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id   = sy-msgid
            lang = 'EN'
            no   = sy-msgno
            v1   = sy-msgv1
            v2   = sy-msgv2
            v3   = sy-msgv3
            v4   = sy-msgv4
          IMPORTING
            msg  = message.
        CASE it_messtab-msgtyp.
          WHEN 'S'.
            WRITE:/ message.
            CLEAR message.
          WHEN 'E'.
            FORMAT COLOR 6 ON.
            WRITE:/ message.
            CLEAR message.
        ENDCASE.
      ENDLOOP.
    ENDFORM.                    "write_message
          FORM BDC_DYNPRO                                               *
    -->  PROGRAM                                                       *
    -->  DYNPRO                                                        *
    FORM bdc_dynpro USING program dynpro.
      it_bdc-program  = program.
      it_bdc-dynpro   = dynpro.
      it_bdc-dynbegin = 'X'.
      APPEND it_bdc.
      CLEAR it_bdc.
    ENDFORM.                    "BDC_DYNPRO
          FORM                                                          *
    FORM bdc_field USING fnam fval.
      it_bdc-fnam = fnam.
      it_bdc-fval = fval.
      APPEND it_bdc.
      CLEAR it_bdc.
    ENDFORM.                    "BDC_FIELD
    *&      Form  upload
          text
    -->  p1        text
    <--  p2        text
    FORM upload .
    p_file1 = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = p_file1
       FILETYPE                      = 'DAT'
      tables
        data_tab                      = lt_output
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " upload
    i am also send u my flat file the client says that in amount filed of 3rd screen we will give the * asterick or other amount plz take it.
    thank
    plz help me.
    jay
    Edited by: jayant kumar on Apr 30, 2008 12:42 PM

    hi jayant,
    Declare '**'  as a character constant and pass this constant to the Subroutine.
    data : c_astrick type char2 value '**'.
    PERFORM bdc_field USING 'BSEG-MWSKZ c_astrick.
    Reward points if it is helpful.
    Regards,
    srilatha.

  • RECORDING WITH F-32 .......ITS URGENT PLZ HELP ME

    HI GUYS
    HERE IS MY REQUIREMENT
    I WANT TO DO A RECORDING USING F-32 AND I HAVE TO DO THE FOLLOWING WAYS
    1- ENTER ACCOUNT
    2-COMPANY CODE
    3-CLEARING DATE
    4-OPENITEM SELETION
    5-I HAVE TO SELECT THE REFERENCE RADIO BUTTON
    HERE IS MY ERROR , I DONT KNOW WHAT ARE THE VALUE I HAVE TO ENTER IN THE REFERENCE FIELD AND HOW TO PROCEED ,PLZ HELP ME IT IS VERY VERY URGENT FOR ME.
    THANKS A LOT
    MRUTYUN

    This should get you started:
    FORM clearing USING    p_purch_order
                           p_cus
                           p_ven.
      DATA: okcode(3).
      CLEAR bdcdata.
      CLEAR messtab.
      REFRESH bdcdata.
      REFRESH messtab.
      MESSAGE s205 WITH 'Clearing A/R Invoice to Invoice Receipt.'.
      PERFORM dynpro USING:
       'X' 'SAPMF05A'        '0131',       "Clear Customer: Header Data
       ' ' 'RF05A-AGKON'      bill_to,
       ' ' 'BKPF-BUDAT'       today_ch,
       ' ' 'BKPF-BUKRS'      'UOFT',
       ' ' 'BKPF-WAERS'      'CAD',
       ' ' 'RF05A-XNOPS'     'X',
       ' ' 'RF05A-XPOS1(2)'  'X',
       ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
      PERFORM dynpro USING:
       'X' 'SAPMF05A'        '0730',       "Amount popup
       ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
      PERFORM dynpro USING:
       'X' 'SAPMF05A'        '0730'.       "Press enter
      PERFORM dynpro USING:
       'X' 'SAPMF05A'        '0710',"Clear Customer: Enter selection criteri
       ' ' 'RF05A-AGBUK'     'UOFT',
       ' ' 'RF05A-AGKON'      bill_to,
       ' ' 'RF05A-AGKOA'     'D',
       ' ' 'RF05A-XNOPS'     'X',
       ' ' 'RF05A-XMULK'     'X',
       ' ' 'RF05A-XPOS1(1)'  'X',
       ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
      PERFORM dynpro USING:
       'X' 'SAPMF05A'        '0609',       "Additional Accounts popup
       ' ' 'RF05A-AGKON(1)'   p_ven,
       ' ' 'RF05A-AGKOA(1)'  'K',
       ' ' 'RF05A-XNOPS(1)'  'X'.
      PERFORM dynpro USING:
       'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
       ' ' 'BDC_OKCODE'      'OMX'.        "Select all
      PERFORM dynpro USING:
       'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
       ' ' 'BDC_OKCODE'      '/6'.         "Inactive
      PERFORM dynpro USING:
       'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
       ' ' 'BDC_OKCODE'      '/6'.         "Find
      PERFORM dynpro USING:
       'X' 'SAPDF05X'        '2000',       "Select search criteria popup
       ' ' 'BDC_OKCODE'      '/24'.        "Next page
      PERFORM dynpro USING:
       'X' 'SAPDF05X'        '2000',       "Select search criteria popup
       ' ' 'RF05A-XPOS1(10)' 'X'.          "Allocation
      PERFORM dynpro USING:
       'X' 'SAPDF05X'        '0731',       "Search for Allocation
       ' ' 'RF05A-SEL01(1)'   p_purch_order.                    "PO
      PERFORM dynpro USING:
       'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
       ' ' 'BDC_OKCODE'      'OMX'.        "Select all
      PERFORM dynpro USING:
    'X' 'SAPDF05X'        '1102',         "Clear Customer: Select open item
       ' ' 'BDC_OKCODE'    '/05'.          "Active
      IF p_test = space.
        okcode = '/11'.                    "save
      ELSE.
        okcode = 'BS'.                     "simulate
      ENDIF.
      PERFORM dynpro USING:
       'X' 'SAPDF05X'        '1102',
       ' ' 'BDC_OKCODE'       okcode.      " save or check
      IF p_test NE space.                  "exit from screen after check
        PERFORM dynpro USING:
         'X' 'SAPMF05A'        '0700',
         ' ' 'BDC_OKCODE'       '/15'.     "Save or check
        PERFORM dynpro USING:              "popup
         'X' 'SAPLSPO1'        '0200',
         ' ' 'BDC_CURSOR'      'SPOP-OPTION1'.       "choose yes
      ENDIF.
      CALL TRANSACTION 'F-32' USING bdcdata MODE u_mode UPDATE 'S'
                                            MESSAGES INTO messtab.
      PERFORM get_message TABLES messtab USING text 'CL'.
      IF text IS INITIAL.
        PERFORM batch_input USING 'F-32'.
      ENDIF.
    ENDFORM.                               " CLEARING
    Rob

  • Query on FBL3N................Urgent  plz help me on this.

    Hi Friends
         Here is my query,
    I am changing the tcode FBL3N to add one extra field into it and to display data in the name1 field for the spcific entries in the selection screen,
    After selecting the All item radio button and giving the range in the select-options when i am pressing F8 it is giving me the correct output,after that when i am trying to display the name1 field by selecting the ctrl+f8 button and pressing the apply button  it is giving me the error as
    "An internal error has arisen in the form routine ANALYZE_ACT_FIELDCAT
    for program RFITEM_INC.
    This is due to inconsistencies between table T021S (special fields) and
    structure RFPOSEXT."
    I changed everything to Y* but still it is giving the error.
    Plz help me in this if someone face the same prob or someone having idea on this.
    Thanks a lot in Advance
    Mrutyun^

    Hi Mrutyunjaya,
    Did you manage to resolve this error?
    Thanks and Regards
    Pras

  • Urgent plz help me out about cartesian product

    plz...its urgent,can anyone help in the following query where iam getting cartesian product,so how to get result without cartesian product
    this is the query
    SELECT DISTINCT MIS.segment1 "ITEM CODE",
    MIS.DESCRIPTION "DESCRIP"
    ,MIS.Primary_uom_code "UOM",
    MTL.LOT_NUMBER "LOT NUMBER"
    ,A.PARTY_NUMBER "CUSTOMER NUMBER",
    A.PARTY_NAME "CUSTOMER NAME",
    (A.ADDRESS1||A.ADDRESS2||A.ADDRESS3||A.ADDRESS4) "SHIP TO",
    B.DELIVERY_DETAIL_ID "DO NO",B.SHIPPED_QUANTITY "SHIPPED QUANTITY"
    ,C.ULTIMATE_DROPOFF_DATE "ISSUED DATE"
    ,D.ORDER_NUMBER "SALES ORDER NUMBER"
    ,E.LINE_NUMBER "SALES ORDER LINE"
    FROM MTL_SYSTEM_ITEMS MIS
    ,MTL_TRANSACTION_LOT_NUMBERS MTL
    ,HZ_PARTIES A,
    WSH_DELIVERY_DETAILS B,
    WSH_NEW_DELIVERIES C,
    OE_ORDER_HEADERS_ALL D,
    OE_ORDER_LINES_ALL E
    WHERE MIS.INVENTORY_ITEM_ID=MTL.INVENTORY_ITEM_ID
    AND B.INVENTORY_ITEM_ID=MIS.INVENTORY_ITEM_ID
    AND A.PARTY_ID=B.CUSTOMER_ID
    AND B.DELIVERY_DETAIL_ID=C.DELIVERY_ID
    AND MIS.INVENTORY_ITEM_ID=E.INVENTORY_ITEM_ID
    AND D.HEADER_ID=E.HEADER_ID

    A lot of times when I get duplicate results, I'll do a select * and see why. Often one of those tables will have a sequenced value that could repeat several times for a combination of values.
    If thats the case, you may need to add something like:
    ...and a.id = (select min(id)
                     from b
                    where a.col = b.col)

  • Maitaining of AP Datasource (Urgent) plz help ...

    hi Edwin ,
    This is prakash,
    My requirement is to design the Account Payables (line item) cube for that one i am using business content datasource is 0FIAP_3 this is the line item details ,in intial stage i want to add the some more fields like (allocation number,business area,material,purchase order date) these fields are not avilable for predefined structure.i want these fields  also so, how can i add the fields ? ,is it going to enhancement or to add the extract structure  ?
    iam confusued so plz help me
    advanced thanks
    prakash
    Message was edited by:
            Prakash V
    Message was edited by:
            Prakash V

    Hi,
    Follow the information given in the below help;
    http://help.sap.com/saphelp_bw32/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
    That means if the required field is available either in BSIK or in BSAK, then just add the field to CI_BSIK and no code in CMOD.
    With rgds,
    Anil Kumar Sharma .P

  • How to get & use xml data with jstl libraries? (URGENT PLZ)

    I am using jstl to get and use xml data
    I needs to perform operations on the parsed xml document with other libraries of jstl. How can i do that.
    I used Dom variable to parse my document as:
    <x:parse varDom="test"> <c:import url="project.xml"/> </x:parse>
    where my project.xml is:
    <?xml version="1.0" encoding="iso-8859-1"?>
    <project>      <projectName>myProject</projectName> </project>
    I can dislay this value in html by
    <x:out select="$test/project/projectName"/>
    But I need a string value sotred in variable such as <c:set var="pname" value="???">
    HOW CAN I SET THIS VALUE IN CORE VARIABLE THAT IS, USING <c:set...> SO THAT IT CAN BE USED ANYWHERE IN JSP PAGE TO CONCATE RETURNED STRING IN OTHER STRING VARIABLES DEFINED BY CORE LIB?
    Jessy
    Message was edited by:
    jessy
    Message was edited by:
    jessy

    I believe that <c:set> should do that but i am facing problem in it. Look into this jsp scriptlet:
    1-<x:parse varDom="test"> <c:import url="project.xml"/> </x:parse>
    2-<x:set var="ds" select="$test/project/projectName"/>
    3-<x:out select="$ds"/> <br>
    4-<c:set var="tt" value="${ds}" />
    5-<c:out value="${tt}" />
    In line 3 variable ds returns: myProject
    In line 5 variable tt returns: [[projectName: null]]
    perhaps on line 4 ds is storing some array to tt and i am not calling correct array element. I tried many options but still could not find solution. Plz Plz do something urgent for me. Thanks
    Jessy
    Message was edited by:
    jessy

  • MySQL connectivity Problem URGENT plz

    Hi
    plz can any one help me... its urgent
    i need java to connect to MySQL database.with mm.mysql.Driver
    the following sample code is just copied from the site and made changes in hostname, dbname and username.
    classpath has been given correctly for the mm.mysql.Driver package (mysql.jar).
    Thanx in advance....
    Result
    compilation --> success
    while executing i get the following Error.
    java.sql.SQLException: General Error: null
         at org.git.mm.mysql.connection.<init>(Connection.java)
         at org.git.mm.mysql.Driver.connect(Driver.java)
         at java.sql.DriverManager.getConnection(DriverManager.java: 515)
         at java.sql.DriverManager.getConnection(DriverManager.java: 197)
         at JDBCDemoCreate.getConnection(JDBCDemoCreate.java: 36)
         at JDBCDemoCreate.<init>(JDBCDemoCreate.java: 14)
    java.lang.NullPointerException
         at JDBCDemoCreate.<init>(JDBCDemoCreate.java: 17)
         at JDBCDemoCreate.main(JDBCDemoCreate.java: 47)
    Here is the code. can any one try this !
    // JDBCDemoCreate.java
    1.     import java.util.*;
    2.     import java.sql.*;
    3.
    4.     public class JDBCDemoCreate {
    5.
    6.     private static final String hostname = "hostname";
    7.     private static final String port = "3306";
    8.     private static final String database = "dbname";
    9.     private static final String username = "username";
    10.     private static final String password = "";
    11.
    12.     public JDBCDemoCreate() {
    13.
    14.          Connection c = getConnection();
    15.
    16.          try {
    17.               Statement s = (Statement)c.createStatement();
    18.               s.executeUpdate("CREATE TABLE rich ( id int primary key, name char(25) )");
    19.          } catch ( Exception e ) {
    20.               e.printStackTrace();
    21.          }
    22.
    23.     }
    24.
    25.     private Connection getConnection() {
    26          // Register the driver using Class.forName()
    27.          try {
    28.               Class.forName("org.gjt.mm.mysql.Driver").newInstance();
    29.          } catch ( Exception e ) {
    30.               e.printStackTrace();
    31.          }
    32.
    33.          // ask the DriverManager for a connection to the database
    34.          Connection conn = null;
    35.          try {
    36.               conn = DriverManager.getConnection("jdbc:mysql://" + hostname +
    37.                                                                      ":"+ port +"/" + database +
    38.                                                                      "?user=" + username +
    39.                                                                      "&password=" + password );
    40.          } catch (Exception e) {
    41.               e.printStackTrace();
    42.          }
    43.          return conn;
    44.     }
    45.     
    46.     public static void main( String[] args ) {
    47.          new JDBCDemoCreate();
    48.     }
    49.}

    Hi!
    You can try with this code coz, i worked with this code only and then i can talk to the database.
    Connection con;
    Class.forName("org.gjt.mm.mysql.Driver";
    con = DriverManager.getConnection("jdbc:mysql:///db?user=root&password=");
    Try it out!
    Queries regarding this is welcome. Either in this forum itself or u can contact in the mail, the id is
    [email protected]
    Regards,
    dinesh

Maybe you are looking for