Structured Newbie: One red tag but document validates -- how can I fix this?
I'm a newbie to structured FrameMaker, am working with someone else's "known good" structured templates (7.2,) and have encountered a situation that I can't readily resolve.
- If I use ESC vT to view the tags in one chapter file, the top-level tag is red and the word Chapter is underlined.
- In Structure View, I can see no red tags or anomalies.
- If I use Element > Validate > Entire Document, the file validates without error.
I can't see any obvious reason the tag should be red. It seems to conform in placement and usage to the same tag in other chapters in the book that display the tag normally (i.e. black, name not underlined).
What's going on? More to the point, how do I fix this?
(Sorry if this has been asked / answered elsewhere -- Forum Search wasn't all that helpful...)
Cheers & thanks,
Riley
Russ:
Longer term, I have serious reservations about continuing to commit content to FrameMaker. Adobe may win back my love someday but it will take a very considerable effort on its part.
As such, and like my current structured-using customer, I see S'Frame as an interim step that faciliates an eventual escape rather than as a long-term solution unto itself...
Cheers & take care,
Riley
Similar Messages
-
When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help! - Chip
This is a mean one. I don't have time to try and find the cause, but at least some answers to your questions, to hopefully shed some more light on this.
Where was the original destination? iCloud folder.
On another drive? Tried to Save as... to Hard Drive (also changing name of file), always get the same non-descript short Error "Couldn't auto-save document." (slides down from top with a yellow warning triangle). Status to the right of document name is "Not Saved".
Another Server? No access at this time.
I also tried File, Revert to, Browse all versions, to check what I'd be losing. Saw I wasn't losing much and selected the last version and pressed Restore - same error. In the end I just quit Pages and re-opened. The document opened with the last few edits missing (but with the status "Edited" next to the name). I re-edited and could save. Good old habit of saving often. -
I was working on a project and I closed it after saving and closed photoshop. Then later when I came to make another adjustment to my PSD I opened the file and it said "Could not complete your request because it is not a valid Photoshop document." How can I fix this? I didn't shut off my mac while saving it. Someone please help
Okay, I just talked to the person that originated the document.
When this usually happens to me, it's because I've done something stupid like saved a .jpeg as a .psd. So that's what I tried. I tried a few other extensions as well, so I thought that it was not an extension problem. Well, the originator told me it had originally been a TIFF, which was the ONE FILE EXTENSION I DIDN'T TRY. :\
Anyway, that fixed it. Usually this error indicates either a corrupt file or the wrong extension, just in case anyone ever digs this convo up later. -
So some songs that i buy from itunes work fine others however dont. They show up on my phone but i cant get them to play. How can i fix this?
Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer. -
My ipod will not respond to anything. I tried to restore but unable to how can I fix this?
Itunes suggeested that my Ipod was coruppted and to restore I tried this and it uploaded software and tried to restore but an error message came back (I did not save the error message). I tried to look up how to resotre and when it shows to hold the menu and the on/off on the wheel for 6 seconds nothing happens just a black screen no indication that the Ipod is on or off. How can I restore this?
The error is an unknown error 1437I wrote this few years ago, see if this still helps
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
My mail is not accepting my password for one of my email accounts. How can I fix this?
Mail is not accepting my password for one of my email accounts. I know the passoword is correct.
It will accept my password for one of my email accounts but not the other.
I have reset the password in the account settings but it still will not work.
how can I fix?From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Click Check Again and post the text that appears. Anonymize any personal information before posting. -
What I think has happened in the past 5years I've been using iTunes, I've cleaned off my hard drive 5times and saving all my music in the process. Each time I start over iTunes asks me to autherize that particular computer, but that computer/OS doesnt exsist anymore. How do I fix this?
Read here since you are a Windows 7 user...
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
Installer comes up as black screen on Windows 8 but does nothing, How can I fix this?
When I download the reader installer screen pops up, but it is black and doesn't do anything. How do I fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have the latest ipod nano (7th gen, 16gb) and I use it mostly on bluetooth. When the battery dies during use with the Bluetooth it doesn't take a charge, the battery doesn't turn on and of course the computer doesn't even acknowledge that it's plugged in. This is my second nano in just over a month, the same thing happen with the first one. I just want to know if their is a way to fix this so I don't have to keep sending it in? Or maybe pay the difference to upgrade to a touch?
If the battery has been completely depleted on the Nano (not really a good idea) then it is going to take 15 to 30 minutes before your computer can see it. Same thing will happen with an iPod Touch.
-
Changed my appleID and password but old one still comes up for iCloud how can I fix this problem
I changed my apple ID and password because I couldn't answer the security question they were over 15 years old and they also had my sons name as authorised to make changes after I got verified with new info I went to iCloud and it still had my old info and I can't sign into that now please tell me how I can fix this problem
Signed very frustrated iPhone 4S owner of 4 of themthe appleID is the connection between the device and icloud and what apps and media itunes store see that you own
if you change appleID you start from scratch
settings->store->appleID is where you remove what appleID your ios device see as yours -
Realplayer video downloader works in IE but not Firefox how can I fix this?
My Realplayer video download function does not work in Firefox although it did several upgrades ago. It works fine in IE but the blue "record this video" does not appear in Firefox. I've searched all over the web for the "fixes" but none of them seem to work.
hello rmctoledo, sorry we cannot provide support for third-party extensions or plugins here. you may have to use the support channels provided by real to search for a solution or report the problem to them. thank you for your understanding!
-
Firefox did not launch. I downloaded new one. the icon is crossed out. how can I fix this?
March 25 2011
I'm on a Mac OS X (power pc)
After restarting my computer today. Firefox did not launch. I clicked on the icon, it started to initiate and then stopped before anything happened.
To try to fix the problem, I trashed the application and downloaded a new one. It gave me a message: "The application Firefox cannot be launched -10661."
I retried the download and the second time, the Firefox application icon has been crossed out. That is it has a circle with a slash over it. Same message comes up.Sorry, Firefox 4 is not available for PowerPC Macs. You can re-install the previous version from here:
http://www.firefox.com/all-older.html
Or you can find an unofficial version of Firefox 4 for PowerPC here: http://www.floodgap.com/software/tenfourfox/ -
Need help on this, it's really annoying for me and the person that calls me, as they need to do a second call so that my phone rings, and it also looks like i rejected the first one, not good for business
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings -
System interupts hogging one core of the processor. How can I fix this?
A week or so I noticed that system interrupts was using a significant percentage of my processor all the time. Upon googling the issue I found that it is most likely a hardware driver error. I have done a in place reinstall or upgrade of the following drivers:
graphics, chipset, audio, network cards, hard drive, BIOS, and CD/DVD drive. I have also gone through Device Manager and one by one disabled devices that had the option to be disabled, except for the devices under the sub-menu system devices, in order to try
to find out what device maybe causing the problem. However, nothing has worked so I am turning to the forums for help. It seems like after restarting my computer it takes a day or so for the problem to reoccur.
I have ran both AVG fullscan and malware-bytes full scan, in and out of safe mode.
Thanks in advance.1. If you don't mind, could you briefly explain what part of the photo led to this? I always like to learn when possible.
2. I cant check if that will work right now because at the moment the problem is not occurring. Previously it had seem the problem occurred about 6 hours after I had restarted the computer, and only went away after a restart. Last night the problem was occurring,
however this morning it has gone away without any restart. Once the problem reoccurs I will see if this works and get back to you
3. You had asked if I had checked any event logs. Here is a list of the only errors I could find during a time which I know the problem was occurring. Thanks.
Log Name: Application
Source: gupdate
Date: 4/17/2014 8:55:34 AM
Event ID: 0
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
The description for Event ID 0 from source gupdate cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Service stopped
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="gupdate" />
<EventID Qualifiers="0">0</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T12:55:34.000000000Z" />
<EventRecordID>115187</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Service stopped</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:15 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledSPRetry 9032
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:15.000000000Z" />
<EventRecordID>115186</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledSPRetry 9032</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:15 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledEvent 9032
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:15.000000000Z" />
<EventRecordID>115185</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledEvent 9032</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:15 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: Continuously busy for more than a second
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:15.000000000Z" />
<EventRecordID>115184</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: Continuously busy for more than a second</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:13 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledSPRetry 6895
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:13.000000000Z" />
<EventRecordID>115183</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledSPRetry 6895</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:13 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledEvent 6895
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:13.000000000Z" />
<EventRecordID>115182</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledEvent 6895</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:13 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: Continuously busy for more than a second
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:13.000000000Z" />
<EventRecordID>115181</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: Continuously busy for more than a second</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:11 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledSPRetry 4805
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:11.000000000Z" />
<EventRecordID>115180</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledSPRetry 4805</Data>
</EventData>
</Event> -
I downloaded Itunes to my computer today to update my ipod's ios (4.2.1 yes i know im way behind) but when i click check for updates it tells me my ios is the current one. How can i fix this? please help!
and at the same time....
I guess you can be glad that you at least aren't "way behind"!
Cheers,
GB
Maybe you are looking for
-
TNS-01155: Incorrectly specified SID_LIST_LISTENER parameter in LISTENER.ORA
Hi, Could anyone please let me know why my listener is not getting started. Please check below my listener status and the error I am getting while starting the listener. [oracle@localhost ~]$ lsnrctl status LSNRCTL for Linux: Version 11.2.0.1.0 - Pro
-
IS-OIL - Invalid ROLLBACK WORK in an update function module
Hi, I am getting this dump which points to CL_PO_HEADER_HANDLE_MM========CP. In the system Update Records (SM13) there is an error for transaction O4NM for custom function ZOIJ_UPDATE_RELATED_DOCS. I have no experience with OIL module so any advice o
-
How can I change the formate of @today from (MM/dd/yyy) to (dd-MM-yyyy)?
I am in openscript, using a settext commend - .setText("{{@today(MM/dd/yyyy), 10-02-2011}}}}"); is anyone know how can I change the formate of @today from (MM/dd/yyy) to (dd-MM-yyyy)? I went to Java Code tab and tried to use - new SimpleDataFormat("d
-
SA520 load balancing for multiple IPSec connections
Hello, I just would like to ask whether the following is possible or what other people think might be the best way to go. Let me describe the current setup: Our company has a main office which is connected to the internet through an SA520W appliance,
-
How to turn off mouse (or touchpad) scrolling when running vim in an xterm?
Just updated 13" macbook pro (mid-2010) from Snow Leopard (10.6.8) to Yosemite (10.10.1). Previously, when running vim in an xterm, scrolling with the touchpad did nothing inside vim, it just scrolled the xterm history back so I could see what I had