STS hierarchy error

STS hierarchy error
Hi there
After we upgraded to BI 7.0 and SEM 6.0 we are facing problem with the STS hierarchy.
Before the upgrade each user will go to the planning page corresponding to his/her assigned department directly.
After the upgrade, all users are seeing the whole hierarchy and have to navigate to there own node.
Any suggestions / ideas.
Regards

Maybe this is elementary and you have checked it already -
Just ensure that the users do not have authorization for the auth object R_STS_SUP and R_STS_CUST.
Regards
Sriram

Similar Messages

Configuration Manager 2012 SP1 Prerequisite Checker returns "Migration active source hierarchy" error

Hello,
I am getting "Migration active source hierarchy" error in the SCCM 2012 SP1 prerequisite checker on the CM 2012 primary site. The error says "There is an active hierarchy configuration for the migration. Please stop data gathering for each
source site in the source hierarchy." However, actually there is no migration source hierarchy configured and there are no migration jobs displayed in CM 2012 console. We used to configure this feature to migrate CM 2007 to current CM 2012 without service
pack two years ago and we have deleted these configurations.
In migmctrl.log, the following record is being generated every 60 minutes.
======================================================
Connection string = Data Source=xxxxx;Initial Catalog=xxxxx;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=False;Application Name="Migration Manager".~~ $$<SMS_MIGRATION_MANAGER><04-07-2014
01:01:53.710+300><thread=6992 (0x1B50)>
Created new sqlConnection to xxxxx~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]: Start two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 1. Query the schedule items that was running or requested to start immediately ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 2. Query the first item in order of DateNextRun ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.819+300><thread=6992 (0x1B50)>
[Worker]:
No item found. Sleep until the next event.~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[Worker]: End two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: the workitem queue is full!~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
======================================================
I am not really sure where to look into in this case. I would appreciate any advice.

Hi,
Could you please upload the full migmctrl.log?
How about specifying a source hierarchy with the same name and password of the hierarchy before in the console, then click Clean Up Migration Data?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Processor Core Cache Hierarchy Error in event viewer and BSOD

Hello everyone. Lately I have had some problems with random freezing, and I can't figure out what's causing it, hoping to get some help here.
I have a MSI X79A GD65 (8D) motherboard and 4930K cpu, currently running @ 4.4ghz, 1,33V, disabled all the power saver features.
The PC have been stable for almost a year without issue, and just recently the PC have started randomly freezing. It can be up and running for a whole week without problems and then suddenty freeze, or sometimes just few hours and then freeze. It seems like it always freezes when surfing the web, and it tend to happen during scrolling a website. It is never happening during gaming with heavy load.
The error message is following:
WHEA Logger A fatal hardware error has occurred.
Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Cache Hierarchy Error
Processor APIC ID: 8
Things I have tried: Reverted back to stock speeds in bios, updated to latest bios, tried a other power supply and formated windows with newest drivers, no difference. Memtest does not show any errors, and the pc passes prime/intel burn test. Cpu temps are fine.
What more can I do ? Is there a chance that the CPU have taken damage from my "little" overclock ?

Hi,
Can you tell what were temps of the CPU while overclocked and under full load (Intel Burn Test)?
Also, did you try different RAM? And are you currently running RAM at frequency of....? (Reduce to 1600MHz).

Heading level hierarchy errors when topics are in TOC more than once

I have discovered that the hierarchy in the Heading levels in
the Printed Documentation will differ from than in my online help
table of contents hierarchy, and that the problem is due to topics
that are intentionally in the TOC more than once.
For example, in chapter 5 of a particular help system the
hierarchy should be:
Heading 1 < Chapter 5 title from top-level book>
Heading 2 <title of second level book>
Heading 3 <title of topic that appears under second-level
book>*
What I actually get is:
Heading 1 < Chapter title from top-level book>
Heading 2 <title of second level book>
Heading 4 <title of topic that appears under second-level
book>*
* This same topic appeared in an earlier chapter. In that
chapter it was really at a Heading 4 level.
Due to company styles, etc. we use a numbering system at the
headings and in the TOC, so instead of
5
5.1
5.1.1
I erroneously get
5
5.1
5.1.1.1
This type of hierarchy issue appears multiple times in this
particular document (which I inherited by the way.)
Other than restructuring the document to not reuse topics in
different places in the TOC, is there a solution or a workaround
for this problem?
What I am doing so far, is generating the Print Documentation
one chapter at a time. As long as a topic is not reused with the
same chapter, my hierarchy of heading levels is maintained;
otherwise, it is not. Then I can put the chapters back together
after fixing the few places that still have heading level problems.
This however, will be quite cumbersome as this document is
translated into nine other languages.
I am using RoboHelp X5 for Word / Word 2003 for the source
and most of the translations; RoboHelp Asian Edition, Simplified
Chinese / Word 2003 for the Chinese translation. The heading level
hierarchy error occurs in both versions.

>> AF: I've commented in sections...
Without Maintain Heading Levels, RH will apply heading levels
to the books and then the topic levels will get bumped down. So a
top level book will be Heading 1 and the Headings in the topic will
get bumped down to 2, 3 and 4 etc. If then you have another book
one level down so that it gets Heading 2 applied, the same topic
but under the level two book would then get 3, 4 and 5 applied.
That is not the original problem but hopefully we are agreed
that is how things work on that.
>> Yes - that is the expected behavior. When it didn't
happen as expected, that's what led me to the discovery of the
cause of the problem (topic reuse).
Your problem was that firstly Heading 3 got bumped to Heading
4 if the same topic was inserted into the TOC twice. I assume it
was OK in the first instance, or is it that when you add it twice
it goes wrong everywhere?
>> Your assumption is correct. First occurrence is
correct. Second, third, and fourth (yes - there is one topic that
is used 4 times! ) are not correct based on TOC hierarchy.
On the numbering, nothing surprises me. If you look at my
site you will see that for RH HTML, i gave up on getting it right.
I have had many queries on this and more than a few people have
indicated they will work on the problem and get it working. I'm
still waiting. There are many posts about outline numbering
problems. Has anyone got it working satisfactorily?
>> I don't really have numbering problems. The
numbering is following the RoboHelp-generated hierarchy and the
.dot template that I apply. It's just that the RH-generated
hierarchy and its heading levels don't correspond to the "real"
hierarchy because of the reuse issue.
I have seen various Word gurus maintain that numbering has
not worked entirely satisfactorily since Word 2! Also enough posts
to convince me this is a Word issue, not a RH issue.
If you want to create a new project and knock something up
that demonstrates this problem, by all means zip it up and send it.
I'll assume it will be a small project and zip to less than 5mb. If
more, contact me first.
>> Unless you have RoboHelp X3 Asian Edition,
Simplified Chinese, there is really no need. I plan to either avoid
the reuse issue in the source, or build the print doc in sections
which is easy enough in RoboHelp X5 for the non-Chinese languages.
It is in the older Asian edition where the problems are compounded
by the omitted reuse topics. If you do have RoboHelp X3 Asian
Edition, Simplified Chinese and want to experiment, I can send you
a cut-down version of the project. Don't feel obligated though;
unless you can read Chinese (I can't) it is very tedious to work
with.

K9N2 SLI Platinum - S3 Resume From Suspend - Cache Hierarchy Error

With my system I am running into a strange error when returning from S3 suspend. The underlying error seems to be "Cache Hierarchy Error". It occurs (only sometimes) within a minute or so after resuming from S3 suspend.
I goggled around and did not find out much. I also posted on the AMD user forum. No response. So I RMA'ed it. In the 2 weeks it took to receive a replacement I used my old AMD 5400+ processor. I had no problems with that processor in the entire 2 weeks.
I received a brand new (boxed and sealed) 9850. Ran for a day OK. Now I am receiving the "Cache Hierarchy Error" again.
From the forgoing facts I am positive this is NOT a AMD processor problem.
I am guessing that this error is showing up because the MB is not supplying enough power to the processor during S3 suspend??
Anyone have any thoughts on this please?
Note - this is NOT and end of the world problem (it does not occur during S1 suspend for instance so I can always do that).
Thanks:

Well, so far I have tried every driver I could find. I Started with the version on the CD, then downloaded from MSI, then tried M$ update, then nvidia. So, I really doubt it is a driver. I found a similar issue here: https://forum-en.msi.com/index.php?topic=120233.0
same processor and mobo. Thanx BOSSKILLER for the link. Filled out my info, I hope they get back to me soon.
I filled out a support request earlier and got this as a reply
Quote from: MSI Tech.
Please refer to Microsoft for possible fixes on this issue: http://support.microsoft.com/search/default.aspx?mode=r&query=does+not+resume+from+s3&spid=11732&catalog=LCID%3D1033&1033comm=1&res=20
none of those have anything to do with my problem and of course my first thought was that it was a M$ problem but had to rule that out after installing XP too... way to pass the blame
EDIT: After contacting MSI using BOSSKILLER's link, I got the real solution! A new BIOS just as he said Very quick response too
Thanx All

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Load Hierarchy Error "object variable or with block variable not set"

Hi gurus
When I try to load a dimension by package I get this error "object variable or with block variable not set" and I can not select the hierarchy of the dimension
You know how to fix this issue?
Thanks
Nayadeth

Hi SAP collegues,
At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes. Please check the following.
Note before doing the following, close all other open Excel and BPC sessions.
Within Excel go to File à Options
Select the Add-Ins option on the left
Select the <<COM Add-ins >> option in the Manage drop down, and click Go
Make sure that the Planning and Consolidation option is selected. If not, mark this box and click OK.
If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
Let me know if you have any queries,
Kind Regards,
robert ten bosch

Hierarchy error

Hi,
While uploading the VENDOR Hierarchy data from R/3 system getting the error message like:
"Node characteristic 0CLASS_NUM is not entered as hierarchy characteristic for 0VENDOR "
What does it mean exactly?
Analysis: The InfoObject 0CLASS_NUM is maintained in the Vendor attributes. Looks everything is active, but while uploading getting the above error message.
If any one has come through the issue. Please share.

you need to specify 0CLASS_NUM as a external char in the hierarchy tab of 0Vendor.
Ovendor - maintenence - hierarchy tab - external char in hierarchies - select 0CLASS_NUM and add. And reload.

Dynamic Hierarchy - Error

Hi Friends,
When I opened the Dynamic Hierarchy to edit ( Esubmit-->Manage open Dynamic Hierarchy) .. I am getting the error.
This key is already associate with an element of this collection.
Pls send your thoughts on this..
Regards
CSM Reddy

Hi Guys,
I found the following relevant notes for this error.
Visual Basic for Applications Reference - Visual Studio 6.0
This key is already associated with an element of this collection (Error 457)
A key is a string specified in the Add method that uniquely identifies a specific member of a collection. This error has the following cause and solution:
u2022 You specified a key for a collection member that already identifies another member of the collection.
Choose a different key for this member.
For additional information, select the item in question and press F1.
But how to choose a different key for this member........
Any thoughts on this pls..........
Regards
CSM Reddy

No unique display hierarchy - ERROR

Hi,
I get his below error for my profit center IO in my report.
E025(R9E) Errors: No or no unique display hierarchy for 'Drill down characteristic' 'Profit Center'.
Profit Center has a restriction on a hierarchy variable.
Please let me know what this error means and how to rectify.
Thanks,
Arun KK

Hi,
I also have this problem. I think this is caused because I want do make a selection on a characteristic using a hierarchy node variable. However, I do not want this characteristic to display in the report using the hierarchy.
This is the first time I try to do that with BI 7.0. However, in previous versions, it was working fine...
I couldn't find any notes. Will let you know if I find something.
Regards,
Francine

BPS STS - HTTPS error

Hi,
We have configured STS in BPS. When we 'Test call with display of URL', we get the following error message:
"BSP exception: Access to page start_sts2.htm requires HTTPS. HTTPS has not been configured on this server"
We have referenced a URL of type HTTP. Why do we require HTTPS.
We checked in t.code SMICM, we have only active HTTP and SMTP service. How to include/activate HTTPS?

Hi Nandula，
Could you share your details , I meet the same situation.
thanks your very much.

Account Hierarchy error while creating Funds,

Hi All,
I am working on CRM 7.0.
I have created Account Hierarchy tree, Hierarchy Node & Subnode and assigned Accounts to node and subnode using transaction BPH.
Now while i select this hierarchy in front end to create Fund in TPM, I am getting error as Invalid Hierarchy ID -
Pls suggest me where might me i do mistate either Account hierarchy creation or in Funds?
For an useful answer point will be given positively.
Thanks in Advance.
Regards,
Ram

Hi Andrew,
have you assigned the correct customer hierarchy in customizing?
Kind Regards,
Giacomo

0figl_vc1_q0002 and hierarchy error

I try to call a report 0figl_vc1_q0002 (cash flow) and I get the error: "Hierarchy INT 00000000 is not available for InfoObject Fincl Statement". All objects that are needed by virtual cube 0FIGL_VC1 (including cube 0FIGL_C01) are updated except one. It is hierarchy for 0GLACCEXT. I can't find update rules to refresh/upload that hierarchy. Where can I find it? Do I have to create it myself?
Are there in Business Content other cash flow reports?

check your system and see the Plug-in. datasource: 0GLACCEXT_T011_HIER is available
from Plug-In release 2003.1. You can find this information in the link
below:
http://help.sap.com/saphelp_nw70/helpdata/en/64/032de5ff014c4c86bc
15272216a5e2/frameset.htm
Colin

Profit Center Hierarchy Error - profit center hierarchy not defined

in Quality client QA
0ke5, the configuration settings is not transfered from DEV through transport request.
now i have created the Profit Center Hierarchy and started process testing. Now i try to assign the hierarchy in 0ke5, error message standard hierarchy not defined in controlling area XXX.
I also try to define the Dummy Profit Center KE59, but error comes profit center hierarchy not defined.
also note that 0ke5 and 1kef are blank.

try to re-transport PCA
IMG; CO--> PCA --> tools --> transaport customizing set. -->
but i believe if you transport only the "master data" Q will function fine. ( try OKEQ first)

Hierarchy error-help needed

Hi every1,
I am still having problem seing my heirarchy in the query that i have created.1 of my info object sales revenue has the conversion routine.And next thing my heirarchy has data in it.for eg:i am doing example from fufu book.which has 3 regions east,west,midwest and each has offices assigned to them and each office has sales rerpresentative name attached to it.
so,can anyone tell what wrong is happening.I see only free characteristics--custid,matid,calday..and then it says unassigned node..don't see my heirarchy..
Thanks

Hi Murali,
Sorry for the delay!
Based on the error message, I found this Microsoft KB article which is talking about the similar problem. It has also given some resolution in it. I think you could try it first.
http://support.microsoft.com/kb/269495
By the way, this forum is for Excel development questions. If you run into some problems when you manually manipulate the Excel workbook without code,
Office IT Pro forum is a better place for you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

STS hierarchy error

Similar Messages

Maybe you are looking for