Ststus 52 and under that ststus is ststus 51

This is an intercompany process.
In my client system, once an o/b delivery is created then by schedule job an inbound delivery happens via IDOC.
In one of the cases the i/b IDOC has a status of 52 (Application document not fully posted) and the message says that "0001 inbound delivery/deliveries with log created (Please check log)". Under that I also get a status 51 (Application document not posted) and the message says that Delivery date is in the past.
However the Inbound Delivery is created in the PO history tab. I checked the dates in the o/b Deliver and I/b delivery and the o/b delivery dates are in the past.
So, my question is that where can I check the logs and how severe is the error.I think the i/b document is created then why is it giving me ststus as 51.

For that IDOC in tcode : WE02 .... double click on the 52 / 51 message you got to log screen ...
there you have option to view the log ..
Thanks,
Adi.

Similar Messages

HELP. Window pops up on Firefox browser that says JavaScript Application, and under that it says 101. There is an OK bitton. when I click OK, up comes the window again and again.

HELP. Window pops up on Firefox browser that says JavaScript Application, and under that it says 101. There is an OK bitton. when I click OK, up comes the window again. Then after hitting OK again and box goes away, when I move my mouse the box comes up identically again. I even called Apple support. They tried things; told me it may well be some set'''bold text'''ting in Firefox Preferences. This started right after Mac Update Install upon closing. Any help, please. My browser is totally (obviously) stuck in this loop!!! [email protected] jason

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.

I bought an ipod for my grandaughter and it says ipod disabled and under that connect to itunes. When i connect to itunes it says cant read because it is locked with security code. Grand-daughter doesn't remember the code she put in. Can anyone help?

I bought an ipod for my granddaughter and it says ipod disabled and under that connect to itunes. When i connect to iturnes it says i need a passcode. My granddaughter doesnt remember what pass code she put in. Can anyone help granny please?????????

we can connect iturnes but we cant buy from it because it ask for security question and i dont know it and none one else

Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column. Now in V 5.0.5 page elements are not shown, just the page title, and under that about:blank. Suggestions? Thanks.

Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column . Now in V 5.0.5 page elements are not shown, just the page title, and under that "about:blank". Also, the activity window used to show sequential activity and now each new page replaces the last. Thanks for any suggestions re how to restore previous activity window function.

Not all YouTube videos are available for downloading, but:
There is the Free iTube Grabber which can capture almost any audio and/or video stream (it says here) but only works with Intel Macs.
http://itube-grabber.en.softonic.com/mac
Firefox Download Helper is also supposed to work, you have to be logged into YouTube first.
and the RealPlayer Downloader that comes with RealPlayer SP for Mac from:
http://www.real.com/realplayer/mac
which also downloads videos from YouTube.
There is also iTubeX which allows you to download videos (Flash, HTML5 and others), .mp3 and .swf files from almost every website as easily as possible:
http://www.macupdate.com/info.php/id/27604/itubex
Lastly: How to download Flash videos and play them in Quicktime using Perian is explained here:
http://perian.org/#watch
It's the video at the bottom of the page.

Getting Main Heading and Under that sub heading In ALV-Display

Hi All,
      I have a requirement to get ALV display with Main Headings and Under each Main heading there are Sub headings.
The Output is somewhat like shown below
      Costing view    |    MEQ1 View
     VER. ID | Desc.    VER. ID | Desc.
If some one had already done such coding please help.
Its Urgent.
Thanks In Advance,
Shyam

You can use FM 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'.
Have a look at below report.
REPORT z_alv_hierseq_list.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.    "#EC NEEDED
PARAMETERS p_max(02) TYPE n DEFAULT '10' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
CONSTANTS :
c_x VALUE 'X'.
TYPES :
1st Table
BEGIN OF ty_vbak,
    vbeln TYPE vbak-vbeln,             " Sales document
    kunnr TYPE vbak-kunnr,             " Sold-to party
    netwr TYPE vbak-netwr,             " Net Value of the Sales Order
    waerk TYPE vbak-waerk,             " SD document currency
END OF ty_vbak,
2nd Table
BEGIN OF ty_vbap,
    vbeln TYPE vbap-vbeln,             " Sales document
    posnr TYPE vbap-posnr,             " Sales document
    matnr TYPE vbap-matnr,             " Material number
    netwr TYPE vbap-netwr,             " Net Value of the Sales Order
    waerk TYPE vbap-waerk,             " SD document currency
END OF ty_vbap.
DATA :
1st Table
gt_vbak TYPE TABLE OF ty_vbak,
2nd Table
gt_vbap TYPE TABLE OF ty_vbap.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
Read Sales Document: Header Data
SELECT vbeln kunnr netwr waerk
    FROM vbak
      UP TO p_max ROWS
    INTO CORRESPONDING FIELDS OF TABLE gt_vbak.
IF NOT gt_vbak[] IS INITIAL.
Read Sales Document: Item Data
    SELECT vbeln posnr matnr netwr waerk
      FROM vbap
      INTO CORRESPONDING FIELDS OF TABLE gt_vbap
       FOR ALL ENTRIES IN gt_vbak
     WHERE vbeln = gt_vbak-vbeln.
ENDIF.
PERFORM f_display.
      Form F_DISPLAY
FORM f_display.
TYPE-POOLS: slis.                    " ALV Global types
Macro definition
DEFINE m_fieldcat.
    ls_fieldcat-tabname = &1.
    ls_fieldcat-fieldname = &2.
    ls_fieldcat-ref_tabname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    ls_sort-tabname = &1.
    ls_sort-fieldname = &2.
    ls_sort-up        = c_x.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_layout   TYPE slis_layout_alv,
    ls_keyinfo TYPE slis_keyinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    lt_sort     TYPE slis_t_sortinfo_alv," Sort table
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv." Field catalog
ls_layout-group_change_edit = c_x.
ls_layout-colwidth_optimize = c_x.
ls_layout-zebra             = c_x.
ls_layout-detail_popup      = c_x.
ls_layout-get_selinfos      = c_x.
Build field catalog and sort table
m_fieldcat 'GT_VBAK' 'VBELN' 'VBAK'.
m_fieldcat 'GT_VBAK' 'KUNNR' 'VBAK'.
m_fieldcat 'GT_VBAK' 'NETWR' 'VBAK'.
m_fieldcat 'GT_VBAK' 'ERDAT' 'VBAK'.
m_fieldcat 'GT_VBAK' 'WAERK' 'VBAK'.
m_fieldcat 'GT_VBAP' 'POSNR' 'VBAP'.
m_fieldcat 'GT_VBAP' 'MATNR' 'VBAP'.
m_fieldcat 'GT_VBAP' 'NETWR' 'VBAP'.
m_fieldcat 'GT_VBAP' 'WAERK' 'VBAP'.
m_sort 'GT_VBAK' 'KUNNR'.
m_sort 'GT_VBAP' 'NETWR'.
ls_keyinfo-header01 = 'VBELN'.
ls_keyinfo-item01 = 'VBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
       EXPORTING
            i_callback_program      = sy-cprog
            i_callback_user_command = 'USER_COMMAND'
            is_layout               = ls_layout
            it_fieldcat             = lt_fieldcat
            it_sort                 = lt_sort
            i_tabname_header        = 'GT_VBAK'
            i_tabname_item          = 'GT_VBAP'
            is_keyinfo              = ls_keyinfo
       TABLES
            t_outtab_header         = gt_vbak
            t_outtab_item           = gt_vbap
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                               " F_LIST_DISPLAY
      FORM USER_COMMAND                                             *
FORM user_command USING i_ucomm     TYPE sy-ucomm
                        is_selfield TYPE slis_selfield.     "#EC CALLED
DATA ls_vbak TYPE ty_vbak.
CASE i_ucomm.
    WHEN '&IC1'.                       " Pick
      CASE is_selfield-tabname.
        WHEN 'GT_VBAP'.
        WHEN 'GT_VBAK'.
          READ TABLE gt_vbak INDEX is_selfield-tabindex INTO ls_vbak.
          IF sy-subrc EQ 0.
          Sales order number
            SET PARAMETER ID 'AUN' FIELD ls_vbak-vbeln.
          Display Sales Order
            CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
          ENDIF.
      ENDCASE.
ENDCASE.
ENDFORM.                               " USER_COMMAND
END OF PROGRAM Z_ALV_HIERSEQ_LIST ***********************
Best Regards,
Vibha
*Please mark all the helpful answers

My cat sat on the keyboard during update now the system is pale with apple in center and under that circling lines i cant either reboot or shut down.. Powering off only resumes the same. HELP

My Cat sat on the keyboard during regular updating of the system. First it went to hypo-slow with alot of beach ball action while i tried to power down for a restart and individually force quit most open apps. Restarted/Resumed same issue.. changed to( close open apps upon restart.).... Now it is light grey, apple icon in center nothing else but the rounding cursur under the middle/only apple icon..... just goes round and round...does not respond to any shutdowns other than power off..... Makes the regular start up noise and back to same routine.... PLease help if possible....
Thanks Tina Schlemer

Try booting to the recovery partition and running Disk Utility.
1, Boot while holding down the command and R keys (two keys).
see this page: http://www.apple.com/osx/recovery/
2. Run Disk Utility, select the hard drive in the left column, First Aid then click Repair Disk.
3. Quit DU and restart.
If that does not do it, you can reinstall the OS from the same screen as took you to DU.
(My cat has never been able to do what yours did. I think he is just trying to email his friends.)

This morning I turned on my ipod and on the top of the screen said i pod dissabled and under that it says try again in 22,470,652 minutes any help

please help me
as it says at the top my ipod is dissabled and it says try again in 22,470,652 min

Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I was adding music and getting ready to sync so I plugged in my iTouch and the screen went blue and the apple logo came up and under that looks like a download line but nothing is downloading, how do I fix this??

I was adding music and getting ready to sync so I plugged in my iTouch and the screen went blue and the apple logo came up with looks like a download line but nothing is downloading, How do I fix this??

Try iPod touch troubleshooting. http://www.apple.com/support/ipodtouch/assistant/ipodtouch/

Unable to set cookie preferences in safari 5.1.5 by going to safari/preferences/privacy. It used to be there and now there is nothing showing under that tab.

I had looked at the cookies a couple of weeks ago. I deleted all cookies.
A few days ago my email was hacked into which sent a spam email to all my contacts. I changed my password to that account, warned everyone in my contacts, and haven't had a problem with email since.
However, I tried to do the 'delete all cookies' again and when I go to safari/preferences/privacy...there is nothing on that screen under that tab. Not even a question mark. I changed my history items to be removed every day from every week but don't think that would be the issue.
Any help would be greatly appreciated.

Uninstall SIMBL as follows.
Select Go ▹ Go to Folder… from the Finder menu bar, then enter the following text in the box that opens:
/Library
A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.
Application Support/SIMBL
InputManagers/SIMBL.bundle
LaunchAgents/net.culater.SIMBL.Agent.plist
ScriptingAdditions/SIMBL.osax
Log out and log back in.
Make sure you never reinstall SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

My iPod touch is not connecting to iCloud account, under iCloud settings has old email account and username that I have since updated and are working correctly on my iPad, any idea how I can reset this?

My iPod touch is not connecting to my iCloud account, under iCloud settings it has my old email account and username that I have since updated and are working correctly on my iPad, any idea how I can reset this on the iPod or otherwise? This old account info keeps coming back on my iPod and messing up access to my apple account and now the icloud. last time a system restore needed to be done to fix it....

It won't give me the option to sign out of the old account, it's that light grey color that you can't click on. And since it has the old email address that it's telling me to go into to verify the account, I can't actually change it... I'm stuck

I have one apple account and one apple ID. I have several devices under that ID. Why when I download and app on one device it goes on all devices?

I have one apple account and one apple ID. I have several devices under that ID. Why when I download and app on one device it goes on all devices?

Click here and use the instructions to turn off the automatic downloads.
(104598)

Hey. I've got a 3rd gen nano that I've just bought, used. When I plug it into mt PC, (win7) and open I tunes, I can't sync my library and under 'devices' in the 'file' colume it acknowledges this ipod but only to transfer purchaces. sync not available

I've got a 3rd gen ipod nano that i've just bought 'used'. When i plug it in to my PC, (win7) I can't sync my i tunes library and under 'devices' in the 'file' column it acknowledges this ipod, but sync and backup are not available. Only have 'transfer purchaces from....' which does nothing for me. any help would be greatly appreciated

Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.

After syncing and updating my iphone my iCalendar on my computer lost most of my information. Including wiping out an entire calendar group. When trying to readd the calendar group it won't let me add events to my calendar under that category.

After syncing and updating my iphone my iCalendar on my computer lost most of my information. Including wiping out an entire calendar group. When trying to readd the calendar group it won't let me add events to my calendar under that category. A message pops up that says: "You can't add events or to do items to a calendar group. Select an individual calendar in the calendar list, then create your events or to do items." Any help here would be greatly appreciated! I would like to either retrieve the old information or find a way to add the category back in to start over. Thanks in advance!

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

Ststus 52 and under that ststus is ststus 51

Similar Messages

Maybe you are looking for