"Stubborn" Computer Name?

I tried changing the computer name as recommended but it is still showing HOST-002, instead of the name I wanted to use (was used to have it). Hope the screen capture will help you with my problem scenario.
Image 1 : taken from system preference > sharing
Image 2 : taken from system preference > network > advance ....
Trying to change the name here DOES NOT help. It will revert back to HOST-002 (after "some time")
Note: I am running Parallel Desktop on my Mac 10.8.3 (FYI)
Image 3 : taken from Terminal
Image 4 : taken from my router home page

Solved... I just notice windows built-in on svreen keyboard at the bottom left corner of the installer main dialog... Silly me xDDDD

Similar Messages

File sharing afp:// address not computer name

Just setting up my new iMac and the file sharing afp:// address does not match the computer's name (Brute Squad), it's pulled in my old PowerBook's name (Alumen). I'm assuming it came from my Apple/iCloud account since that was the only computer I had registered when I set the iMac up. Restarting didn't help. Any ideas?

You can change the computer name in the System Preferences > Sharing pane, change the name at the top.
Best of luck.

How to change the computer name

I need to change the computer name but after this I cannot access to the historical data (printing alarms).
I have already changed the settings in Options->System and restarted the system.
With MAX 3.0 I can see that all the alarm records are stored with the old computer name \\computer name\process\....
How can I do to read the old alarms with the new computer name?
Thank you
Michael

Hi,
When you change the computer name in Options>>System, you are not changing the name of the computer. Rather, you are telling Lookout to log to either a remote or local system. Here are the specifics:
1. Computer Name: Name you want the traces to appear with (\\computer_name\process\...)
2. Default Computer: Computer you want to log to. If the name listed here is different than your computer's name (as seen by Windows), then it will attempt to log directly to that remote machine.
3. Default Path: Directory on either your local or remote machine that you want to log to.
To change the name of your local computer, you will need to do that in Windows. If you have WinXP, you can do this by right-clicking on My Computer and selecting Computer Name.
Go
od Luck
Mike

System Information - Can Labview tell me the Computer Name/Hardware/System Performance

Hi there,
Can labview look at the Computer that the program is running on and tell me the system infomation??
Like, computer name, System performance etc.
I have it looking at the hard drives and sending me an e-mail to say when they get full.
But it would be nice to include some system information so i can try to keep track of its health as well.#
Any ideas??
Pete

Do a google search for environment variables inside windows.
Here is one website.
http://vlaurie.com/computers2/Articles/environment.htm
I also downloaded this file recently from the NI site.
Attachments:
windows info.zip ‏829 KB

How to get a computer name in teststand step ?

how to get a computer name in teststand step ?

Hi,
Use an ActiveX Automation Adapter with the following settings,
ActiveX Reference : RunState.Engine
Automation Server: TestStand API (depends on your version)
Object Class: Engine (IEngine)
Action: Get Property
Property: ComputerName
Then set your Parameters: to pickup the String ComputerName.
Regards
Ray Farmer
Regards
Ray Farmer

How can I see which computers (computer name) Creative Cloud is installed on?

How can I see which computers (computer name) Creative Cloud is installed on?

Hi Arno ten Hagen,
To check for activation you need to go to all the machines in which you have installed CC apps, launch any of the CC software, go to help and you will see the email address mentioned by which you are logged in to that machine.
Kb: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html .
Regards,
Romit Sinha

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes, and Itunes can't find my Ipad. [email protected]

Ok, if reinstalling iTunes as suggested above does not resolve the issue of iTunes recognising the iPad then try this -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
As for making your new laptop your 'home computer' follow these instructions -
1. Without connecting your iPad to your computer -
A) Install iTunes / make sure the latest version of iTunes is installed.
B) Go to the Store tab and click on "Authorise This Computer".
C) Go to Edit, click on Preferences [iTunes and Preferences on Macs] and click on Devices. Put a check mark in the box next to "Prevent iPods/iPhones/iPads from syncing automatically". Click OK and close iTunes.
2. Connect your iPad to your computer -
A) Start iTunes (it will not start automatically because of the action at 1(C) above).
B) Right click on your iPad under Devices in the left column. Select "Transfer purchases".
C) When the transfer has completed, right click on your iPad again and select "Backup".
D) When the backup has completed, left click on your iPad, click on the Apps tab, and put a check mark in the box next to "Sync Apps", and then click on "Apply" (bottom right).
E) Unless you want to always do a manual sync (as I do), go back to Edit, Preferences [iTunes and Preferences on Macs] and uncheck the box next to "Prevent your iPod.....".
F) Finally, on your iPad, check that everything is syncing properly. If not, go back to iTunes and check all settings.
NB You should not lose any apps. However, any 'purchased' missing apps can be downloaded again FOC. As with updates, this must be done with the Apple ID under which they were originally 'purchased'.
Also see here as to moving your music to your new computer -
http://support.apple.com/kb/HT4527

WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network

The Exchange Management Shell fails to connect in Exchange 2013 environment, this is a DAG environment and previously it indicates another error message, which is in my another thread. We fixed that error by delete the retired proxy entry in the server registry,
after that the error is gone but changed to below one, anyway the EMS still fails to connect to all servers:
VERBOSE: Connecting to NSWVIP999WTMBX.air.abc.au.
New-PSSession : [NSWVIP999WTMBX.air.abc.au] Connecting to remote server NSWVIP999WTMBX.air.abc.au failed with the
following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows
access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote
computers within the same local subnet. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
   gTransportException
    + FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Then it just show can't connect to all the exchange servers, from the wording it seems pointing to the Windows firewall settings for winRM, but when I look at the windows firewall found it's turned off. We use Sophos enterprise for the security, but all
other 3 exchange servers didn't have the same issue.

Hi Lynn,
Thanks for your analyst and reply, I run the command as you suggested and checked accordingly to Task Manager, but seems none of them indicates a firewall or anti-virus.
  TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       4
TCP    0.0.0.0:808            0.0.0.0:0              LISTENING       2260
TCP    172.17.2.123:444       172.16.2.127:8050      ESTABLISHED     4
TCP    172.17.2.123:444       172.16.2.127:8069      ESTABLISHED     4
TCP    172.17.2.123:444       172.17.2.127:8053      ESTABLISHED     4
TCP    172.17.2.123:10952     172.16.2.68:80         ESTABLISHED     3296
TCP    172.17.2.123:11185     172.16.2.90:8080       SYN_SENT        468
TCP    172.17.2.123:11190     172.16.2.90:8080       SYN_SENT        15268
TCP    172.17.2.123:11330     172.16.2.90:8080       SYN_SENT        1296
TCP    [::]:80                [::]:0                 LISTENING
4
TCP    [::]:808               [::]:0                 LISTENING
2260
TCP    [::1]:6001             [::1]:8028             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8029             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8030             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8031             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8032             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8033             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8034             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8035             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8036             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8037             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8040             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8041             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8048             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8049             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8059             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8060             ESTABLISHED     4764
TCP    [::1]:8028             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8029             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8030             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8031             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8032             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8033             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8034             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8035             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8036             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8037             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8040             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8041             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8048             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8049             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8059             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8060             [::1]:6001             ESTABLISHED     9980
TCP    [fe80::9054:e8f5:f885:8105%20]:808 [fe80::9054:e8f5:f885:8105%20]:9901
ESTABLISHED     2260
TCP    [fe80::9054:e8f5:f885:8105%20]:9901 [fe80::9054:e8f5:f885:8105%20]:808
ESTABLISHED     4868
This is the full result, among them
4 -- System -- NT Kernel & System
468 -- There is no process associated with PID 468
1296 -- svchost.exe -- Host Process for Windows Service
2260 -- SMSvcHost.exe -- SMSvcHost.exe
3296 -- CcmExec.exe -- CCM Executive
4764 -- Microsoft.Exchange.RpcClientAccess.Service.exe -- Microsoft.Exchange.RpcClientAccess.Service.exe
4868 -- Microsoft.Exchange.ServiceHost.exe -- Microsoft.Exchange.ServiceHost.exe
9980 -- w3wp.exe -- IIS Worker Process
15268 -- ServerManager.exe -- Server Manager

I can't connect to other computers on my network with computer names. Any suggestions?

i can't connect to other computers on my network with computer names. Any suggestions?

In what way are you trying to connect? File sharing? Printer sharing? Screen sharing? Something else?
How are your computers connected to this network? What happens when you try to connect to them?
Best of luck.

Can you make Sysprep on Windows 8.1 and Server 2012 R2 Prompt for a Computer Name

Hi guys,
Our Windows 7 Unattend.xml has always made Sysprep prompt for Computer Name. I'm struggling to achieve that with Windows 8.1 and Svr 2012 R2.
Firstly: Is it still possible?
Secondly: If so, How?
Thanks

OOBE will only hide pages that contain the answers in the XML. So if you want OOBE to prompt for a computer name, make sure your XML does not contain the ComputerName object.

Time Machine and computer name change

I just recently reinstalled the operator system after a computer crash when i did so changed the computer name and now when i go into time machine to restore the settings it only shows up as one sparse disc image.
i have found that when i can mount it manually but the files are not usable and when i mount it with time machine the history does not appear.

Go to System Preferences - Sharing and change the computer name there. You can also, optionally, change the name of your hard drive to further clarify the origin of your backups. Click once on the "Macintosh HD" on your desktop, then click its name to allow you to edit it.
Matt

LOGICAL SYSTEM NAME OR COMPUTER NAME

Dear Experts,
How can we get computer name of the user in SAP,agaisnt bsuiness transactions for outbound deliveries and finance documents.
Best rgds
Mani

Hi,
enter SM04.
regards

How to get the computer name in a text box automatically?

Hi,
I am using flash cs4 (AS3). How can I get the computer name/username in a text box created for grabbing Username from the computer and show it in the username textbox automatically?
Thanks.

You can't running a SWF on a webpage. Can you imagine if a SWF had access to that OS-level information? It breaches everything Flash, browsers and the web stands for, which is "not being an application", therefore it has absolutely no access to your computer. Especially information like your username.
If you're running a flash projector, that's different. Not that a projector can do that either, but projectors are applications and can be extended by things like MDM Zinc and ScreenTime mProjector. Going that route opens up the constraints on Flash Projectors and lets you tap into things like .dlls. Only via that route are you going to be able to get at such a low level item like the current logged on user.

Changing the Computer Name... when it's greyed out in the Sharing Prefs?

Okay, here's a weird one.
Using Carbon Copy Cloner 3, I recently cloned the hard drive on my iBook G4 (OS X 10.5.4)—it was dying and I needed to swap in a new one. I made the swap, using the cloned version of my old drive, and everything was wonderful.
The new drive is great. The only artifact of the change is that when I see my iBook on a network, instead of the original computer name (let's call it +David's iBook+ for argument's sake), I get +David's iBook_1+. When I go to the Sharing Preferences pane, in the field where I should get my good old iBook's name, I get that _1 tacked on again, and instead of being able to edit it, the name is greyed out!
The hostname is fine. I can edit that. But the computer name refuses to be changed by any of the normal methods. I could probably go into Terminal and edit the /Library/Preferences/SystemConfigurations/preferences.plist file. But I get the feeling that there's something else going on here.
Any thoughts?
(I'm now wishing I'd just restored using Time Machine. Old habits die hard.)

Thanks! I should have mentioned that I'd already tried that. Several times. There are no other computers with the same name as mine on either my home or office network.
I can click on the "Edit" button and change the name to "David.local" or whatever, and it'll stay that way—but it doesn't show up on the LAN. When I look for the computer over the network—either using Bonjour or the Apple-K command in the Finder—it shows up with its old name. If I try to connect with "David.local" (or whatever), I get an error saying the server can't be found.
Since posting, I've also tried logging in as the root user and changing it there. No dice.
I had to replace the hard drive (the reformatting that caused me to clone the disk in the first place turned out not to solve the problem, which was that the hard drive was failing); for a week I was using an external drive clone as the startup disk for my iMac. It let me change the name there just as it should have. No more +David's iBook_1+. Woohoo!
But when I copied the disk back onto my brand new internal drive... There it was again. Greyed out. Can't get at it.
Grrrrrr.
Again, it's not a big deal; I want to change the name so that it fits the naming convention at my office. But it's really bugging me! (Obviously.)
I suppose I could reinstall and migrate the accounts and apps over....

Error connecting, tap to retry, it sees my WiFi and computer name but can't connect

Hi all, I am trying to get Edge Inspect to work on my Windows 7 PC (it did work for me a few times when I had it installed as Shadow when it initally came out)
I have read through various forum posts. I am also running Mcafee Virusscan/Firewall.
In Google Chrome I have the extension installed at the little "In" symbol top right, when I click it it says Adobe Edge Inspect "On", please start the Adobe Edge Inspect Application.
I open up the lastest version of Edge Inspect (v1.0.393) on either my iPhone or iPad, it shows the name of my WiFi router and shows the name of the computer that is running Google Chrome, it looks like it is searching for a connection (shows spinner) and then it says "Error connecting, tap to retry".
I have opened up port 7682 in my Mcafee Firewall
I have shutdown all open programs
I have tried manually entering in the computer IP address via manual connect
I have updated chrome extension and ios apps to latest version
I have tried reinstalling chrome extension
I have tried at Windows Command prompt "netstat -ano" it doesnt show port 7682 being used, until I open up Google Chrome, then it shows MYCOMPUTER:7682 SYN_SENT, which I checked the PID against and yes it is Google Chrome using 7682
Any help would be great

Hi again Mark, still no luck here.
I also have a Mac in my network so I thought I'd try installing to that to see what would happen, I just installed Adobe Edge Inspect extension onto Google Chrome on that machine and restarted the iOS apps on both iPad and iPhone and they actually didnt see the Mac machine at all, still just shows the PC computer.
Also did I mention on my iPad I can still see the last time the connection actually worked (when it was called Adobe shadow, on my iPad underneath MYCOMPUTERNAME Error Connecting, tap to retry it has MYCOMPUTERNAME Last Used 24/07/12 8:59PM). Wouldnt have anything to do with a conflict with the old Adobe Shadow or anything would it, I'm pretty sure Adobe Shadow got uninstalled by default anyway, just a thought.
So I'm not sure if it can be a problem with the Router because nothing has changed with the router since the last time it successfully worked when it was Shadow? I did add the Mac machine to the network since this time, but that machine hasnt been on when I have been doing any of this testing anyway.
Also in the Edge Inspect in the Chrome browser I do not see any deviced listed, but back on the iOS App I do see the Wifi network and Computer name as discussed, so does this mean its an inbound connection issue or?
Also sent you router settings via private message etc.

"Stubborn" Computer Name?

Similar Messages

Maybe you are looking for