Stuch at the step " Check DDIC password "
Hi,
I go for system export/ import throuh sapinst.
sap ecc 6.0
oracle
red hat linux
After making the export of system , then go for system import via .sapinst , I m stuck at step " Check DDIC password ".
Even I m not be able to logon to system through sapgui.
Following are the error logs :
*==> sapinstdev.log <==*_
TRACE [iaxxbjsmod.cpp:719]
CJSlibModule::showOkCancelBox_impl()
<html>Test logon to SAP System REQ failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>
TRACE [iaxxgenimp.cpp:1155]
showDialog()
waiting for an answer from gui
sapinst_dev.log
>TS> Tue Apr 13 11:50:18 2010
T:46912508454944 Error in program 'sapinstexe': ======> A:SY:002 Program SAPMSSY1 n
>TS> Tue Apr 13 12:14:44 2010
T:46912508454944 Error in program 'sapinstexe': ======> Connect to SAP gateway failed
Connect_PM GWHOST=isrecqa, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR partner '172.25.0.94:3300' not reached
TIME Tue Apr 13 12:14:44 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 14
T:46912508454944 Error in program 'sapinstexe': ======> Connect to SAP gateway failed
Connect_PM GWHOST=isrecqa, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR partner '172.25.0.94:3300' not reached
TIME Tue Apr 13 12:14:44 2010
RELEASE 700
COMPONENT NI (network interface)
Thanx,
Amit
Hi,
We are running on Linux plateform, below is the required log ...
isrecqa:reqadm 4> cat dev_disp
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid REQ
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7000
patchlevel 0
patchno 236
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 24877
Tue Apr 13 18:46:57 2010
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 24877) [dpxxdisp.c 1287]
shared lib "dw_xml.so" version 236 successfully loaded
shared lib "dw_xtc.so" version 236 successfully loaded
shared lib "dw_stl.so" version 236 successfully loaded
shared lib "dw_gui.so" version 236 successfully loaded
shared lib "dw_mdm.so" version 236 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Apr 13 18:47:17 2010
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0029.qqq.nxst) took 20 seconds
Tue Apr 13 18:47:27 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 10 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >isrecqa_REQ_00 <
DpShMCreate: sizeof(wp_adm) 22776 (1752)
DpShMCreate: sizeof(tm_adm) 6009216 (29896)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2008)
DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x2aaab589d000, size: 6704576)
DpShMCreate: allocated sys_adm at 0x2aaab589d000
DpShMCreate: allocated wp_adm at 0x2aaab589f310
DpShMCreate: allocated tm_adm_list at 0x2aaab58a4c08
DpShMCreate: allocated tm_adm at 0x2aaab58a4c68
DpShMCreate: allocated wp_ca_adm at 0x2aaab5e5fde8
DpShMCreate: allocated appc_ca_adm at 0x2aaab5e66e68
DpShMCreate: allocated comm_adm at 0x2aaab5e693e8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x2aaab5eef0c8
DpShMCreate: allocated gw_adm at 0x2aaab5eef148
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x2aaab5eef178
DpShMCreate: allocated wall_adm at 0x2aaab5eef180
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 232 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 57 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Tue Apr 13 18:47:30 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( isrecqa) [dpxxdisp.c 12650]
DpStartStopMsg: send start message (myname is >isrecqa_REQ_00 <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 16383 MB.
It should be configured with at least 20 GB on 64 bit systems.
See note 153641 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
Minimum value is 8192 MB.
Recommended size is 75 % of RAM + swap.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Apr 13 18:47:31 2010
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 236
Release check o.K.
Tue Apr 13 18:47:32 2010
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
isrecqa:reqadm 5>
Regards,
Mushtaq
Similar Messages
-
Error with install Solution manager on step: check DDIC password.
Iu2019m installing SAP Solution Manager 7.0. ABAP and JAVA instance. OC SLES 10.2. БД Oracle 10.2, update 10.2.0.4. At step 28 out error:
Test logon to SAP System UST failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.
Error of sapinst_dev.6.log
WARNING[E] 2010-07-01 11:30:00.166 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
DB-Error - 0
Error of /usr/sap/UST/DVEBMGS03/work/dev_rfc.trc
u2026.
ERROR file opened at 20100701 124301 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.8.240:3303' not reached
I have tried to change password DDIC at 19920706. Error could not be fixed. In the SAP GUI can connect SAP *. When Iu2019m trying to connect DDIC out DB-Error u2013 0.suse102:/usr/sap/UST/DVEBMGS03/work # cat dev_rfc.trc
ERROR file opened at 20060102 052456 YEKT, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.8.240:3303' not reached
TIME Mon Jan 2 05:24:56 2006
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 2
T:1115703616 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.8.240:3303' not reached
TIME Mon Jan 2 05:24:56 2006
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 4
ERROR file opened at 20100706 142541 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR service '/tmp/.sapstream40300' in use
TIME Tue Jul 6 14:25:41 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -4
MODULE nixxi.cpp
LINE 3148
DETAIL NiIBindSocket: could not delete file '/tmp/.sapstream40300'
for hdl 2
SYSTEM CALL unlink
ERRNO 1
ERRNO TEXT Operation not permitted
COUNTER 4
T:1115703616 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.10.8.240:3303' not reached
TIME Tue Jul 6 14:25:41 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 6 -
"System copy stops in "check DDIC password" step
Hi,
We performed a combined upgrade/unicode conversion to ECC5.0 Non-Unicode to ECC 6.0 Unicode ( Windows 2003 Server, Oracle 10gR2 ).
But at the end of import ( using R3load tool ), the import stops at "check DDIC password" step with error message :
"Test logon to SAP System D12 failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
We checked the system, it's online , and the user DDIC exists. But we could not logon using sapgui. it gives message :
"Programm SAPMS380 not found"
If any one could help
thank you
Pascal
file sapinst_dev.log :
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:13:39.460 [iaxxclogintimeout.cpp:92]
CLoginTimeout::run()
Login in progress
TRACE 2008-10-06 12:13:39.460
Connection request to guiengine backend by host 10.90.150.140
TRACE 2008-10-06 12:13:39.460 [iaxxgenimp.cpp:471]
CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2008-10-06 12:13:39.475 [iaxxgenimp.cpp:490]
CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation Master</title>
<dialog/>
TRACE 2008-10-06 12:13:39.522
Protocol version is 3.1
TRACE 2008-10-06 12:13:39.522
Send connect information
TRACE 2008-10-06 12:13:39.522
client logged on
TRACE 2008-10-06 12:13:39.803 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:03.131 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2008-10-06 12:14:03.131 [iaxxcdialogdoc.cpp:212]
CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2008-10-06 12:14:03.147 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
INFO 2008-10-06 12:14:03.147 [synxcfile.cpp:177]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:471]
CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:490]
CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:05.522
current working directory is C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/
INFO 2008-10-06 12:14:05.522 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2008-10-06 12:14:05.522 [synxcfile.cpp:177]
CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\x.
TRACE 2008-10-06 12:14:06.553
Running with toplevel file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//toplevel.xml
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:14:06.741
Running with dialog file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//dialog.xml
TRACE 2008-10-06 12:14:06.881
Running with keydb file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//keydb.xml
TRACE 2008-10-06 12:14:07.194 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml
INFO 2008-10-06 12:14:07.209 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml'.
TRACE 2008-10-06 12:14:08.709 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml
INFO 2008-10-06 12:14:08.725 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml'.
TRACE 2008-10-06 12:14:17.928
SAPinst was started using commandline: G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214\sapinst.exe
TRACE 2008-10-06 12:14:17.928
SAPinst properties are :
GUISERVER_DIALOG_PORT=21212
GUISERVER_HTTP_PORT=4239
SAPINST_CONTROL_URL=control.xml
SAPINST_DIALOG_PORT=21200
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,SMDAgent
SAPINST_KEYDB_URL=keydb.xml
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_URL=.
SAPINST_PACKAGES_URL=packages.xml
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SKIP_DIALOGS=false
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=true
TRACE 2008-10-06 12:14:17.959 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaejs701.dll
TRACE 2008-10-06 12:14:18.69 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iacdlib701.dll
TRACE 2008-10-06 12:14:18.162 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaccdlib.dll
WARNING 2008-10-06 12:14:18.162 [synxcpath.cpp:912]
CSyPath::getOSNodeType(bool )
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
TRACE 2008-10-06 12:14:18.225 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iapasswdman701.dll
TRACE 2008-10-06 12:14:18.225
This is SAPinst, version 701, make variant 700_REL, build 967243
compiled on Mar 7 2008, 01:01:19
TRACE 2008-10-06 12:14:18.350 [synxcaccmg.cpp:640]
CSyADsPath::fromString(ONEPNET\d12adm)
Account ONEPNET/d12adm has ADS path 'WinNT://ONEPNET/d12adm'
TRACE 2008-10-06 12:14:18.428 [synxcaccnt.cpp:967]
iastring CSyAccountImpl::getSID(IUnknown* pUnk) const
d12adm has SID S-1-5-21-770850386-355409785-620655208-35637
TRACE 2008-10-06 12:14:20.678 [synxcuser.cpp:1076]
CSyUserImpl::isExistingOnOS()
existence check for user d12adm returned true.
TRACE 2008-10-06 12:14:20.678 [syxxccache.cpp:208]
CSyAccountCache::getUserImpl(name="ONEPNET\d12adm", sid="", create=false, ISyProgressObserver* )
inserted account (d12adm, S-1-5-21-770850386-355409785-620655208-35637, USER) into the accountcache.
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:175]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
= C:=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
= G:=G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214
= J:=J:\Install_ECC6_64_uni\BS_2005_SR3_SAP_Installation_Master\IM_WINDOWS_X86_64
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\d12adm\Application Data
CLIENTNAME = TAL-MOBILE
ClusterLog = C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles = C:\Program Files\Common Files
CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
COMPUTERNAME = SAPRH-PROD1
ComSpec = C:\WINDOWS\system32\cmd.exe
DBMS_TYPE = ora
dbs_ora_schema = SAPSR3
dbs_ora_tnsname = D12
FP_NO_HOST_CHECK = NO
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\d12adm
JAVA_HOME = C:\Program Files (x86)\Java\j2re1.4.2_09
LOGONSERVER =
CDBOUREGREG
NLS_LANG = AMERICAN_AMERICA.UTF8
NUMBER_OF_PROCESSORS = 8
ORACLE_HOME = D:\oracle\D12\102
ORACLE_SID = D12
OS = Windows_NT
Path = D:\oracle\D12\102\bin;C:\Program Files (x86)\Java\j2re1.4.2_09\bin;C:\Program Files (x86)\EMC\PowerPath\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\usr\sap\D12\SYS\exe\uc\NTAMD64
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB = D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64-multi-thread;D:\oracle\D12\102\perl\5.8.3\lib;D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64;D:\oracle\D12\102\perl\site\5.8.3;D:\oracle\D12\102\perl\site\5.8.3\lib;D:\oracle\D12\102\sysman\admin\scripts;
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = EM64T Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 0f0b
ProgramFiles = C:\Program Files
ProgramFiles(x86) = C:\Program Files (x86)
SAPDATA_HOME = I:\oracle\D12
SAPEXE = G:\usr\sap\D12\SYS\exe\uc\NTAMD64
SAPINST_EXEDIR_CD = J:/Install_ECC6_64_uni/BS_2005_SR3_SAP_Installation_Master/IM_WINDOWS_X86_64
SAPLOCALHOST = saprh-prod1
SAPSYSTEMNAME = D12
SESSIONNAME = RDP-Tcp#1
SystemDrive = C:
SystemRoot = C:\WINDOWS
TEMP = G:\usr\sap\D12\tmp\1
TMP = G:\usr\sap\D12\tmp\1
TNS_ADMIN = G:\usr\sap\D12\SYS\profile\oracle
USERDNSDOMAIN = ONEPNET.INTRA
USERDOMAIN = ONEPNET
USERNAME = d12adm
USERPROFILE = C:\Documents and Settings\d12adm
windir = C:\WINDOWS
User: ONEPNET\d12adm, Id: S-1-5-21-770850386-355409785-620655208-35637
Working directory: C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:185]
syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows [Version 5.2.3790 Service Pack 2] SAPRH-PROD1
RAM size (MB): 12287
Swap size (MB): 21708.6
TRACE 2008-10-06 12:14:20.709
Running with control file control.xml version=701 changelist=33819 product-id=d0e28628
TRACE 2008-10-06 12:14:20.709
Selected Service NW_ABAP_OneHost|ind|ind|ind|ind
TRACE 2008-10-06 12:14:20.709 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml
INFO 2008-10-06 12:14:20.709 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml'.
INFO 2008-10-06 12:14:20.959 [sixxcstepexecute.cpp:387]
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
TRACE 2008-10-06 12:14:29.428
Java script statistics: ScriptSize 4788012 CompileTimeInSeconds 8.437
TRACE 2008-10-06 12:14:29.459 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iajsmod.dll
TRACE 2008-10-06 12:14:29.537 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodos.dll
TRACE 2008-10-06 12:14:29.569 [synxccuren.cpp:1115]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:29.584
Call block:W2K_ServicePack_Check_ind_ind_ind_ind
function:W2K_ServicePack_Check_ind_ind_ind_ind_Preprocess
is validator: false
TRACE 2008-10-06 12:14:29.834
Status of Step |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password is not OK. Re execute only that step and go on in RESTART mode.
TRACE 2008-10-06 12:14:29.991 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml
INFO 2008-10-06 12:14:29.991 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml'.
TRACE 2008-10-06 12:14:30.131 [synxcfile.cpp:339]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml
INFO 2008-10-06 12:14:30.147 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml'.
INFO 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:781]
Execute step checkDDIC000Password of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0
TRACE 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:850]
Execution of preprocess block of |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password returns TRUE.
TRACE 2008-10-06 12:14:30.272 [synxccuren.cpp:1115]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:30.272
Call block:NW_DDIC_Password_ind_ind_ind_ind
function:NW_DDIC_Password_ind_ind_ind_ind_SubComponentContainer_checkDDIC000Password
is validator: false
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstance.byNumber(00, saprh-prod1)
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstanceInstall.find(
function (instance) {
return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall.find() done: 1 instances found
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall.getSystem(D12)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NW()
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NW() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall.getSystem() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers(D12)
TRACE 2008-10-06 12:14:30.319
t_NW_users.updateRow(, WHERE sid='D12'), updating
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.319 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWDialogInstance.getRFCUser() done
TRACE 2008-10-06 12:14:30.381 [syxxccuren.cpp:31]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPPARAM700', const iastring & '1')
Environment variable SAPPARAM700 set to value '1'.
TRACE 2008-10-06 12:14:30.397 [iaxxctrace.cpp:42]
CIaIcmAuth::traceInit()
Initialized SAP trace: tf is now set.
INFO 2008-10-06 12:14:30.412 [synxccuren.cpp:65]
CSyCurrentProcessEnvironmentImpl::removeEnvironmentVariable(iastring)
Removed environment variable SAPPARAM700 from current process environment.
TRACE 2008-10-06 12:14:30.412 [iaxxbsapparam.cpp:68]
CIaSAPParam::initializeDefaultValues_impl()
Read default profile values from kernel.
TRACE 2008-10-06 12:14:30.412 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodapp.dll
TRACE 2008-10-06 12:14:30.694 [iaxxclib.cpp:188]
CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodrfc.dll
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.084 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:33.957 [iaxxdlghnd.cpp:198]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:35.644 [iaxxdlghnd.cpp:198]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:44:40.278 [iaxxcnclhd.cpp:84]
CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
ACTION_CANCEL requested
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> You are about to cancel the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System installation. <li> Choose one of the following: </li> <ul> <li> 'Continue' - to continue the installation. </li> <li> 'Stop' - to stop the installation and exit SAPinst. You can continue the installation later from this point<br>Note:<br>If you stop the installation after the installation activites have been started, do not use the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System, as it is not ready to be used. </li> </ul> </body></html>
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-10-06 12:44:41.840 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
INFO 2008-10-06 12:44:42.074 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.Hi,
The possible problem for the DDIC user could be, once the data imported the password of the DDIC got reset to older password as in ECC5, try login the system with sap* user and reset the password of DDIC, then login as DDIC user and set the password permannetly and retry the activity.
If sap* also shows with same problem try changing the password of sap* from DB level by executing the query(you can find solutions for this in SDN forum threads, check them). or try deleting the user sap* and recreate where user gets creted wiuth default pasword as "PASS" and logon and reset the user DDIC.
Regards. -
Installation stop at check DDIC password.
Hello everybody,
I am trying to install the IDES SR3 on windows (x64) and oracle.
but my installation is stop on the Check DDIC password phase.
I can log on using the user name DDIC and password 19920607.
So please suggest me How to solve the problem and continu
with the installation.
Thanks
GaneshHI,
NOw I have strange problem, I am able to log on frist time by using the standard DDIC password,
but after that I am unable to Logon.
Second thing, SAP MMC is shown in green color, when I am trying to log on by SAP logon pad
it does not show the SAP logon screen. I have been wait from last 30 Min
but till I am not get the SAP logon screen
At my PC two IP one for Loopback adpater second is the network IP
I am trying by using both but till not get sap logon screen
Also when I check the SAP MMC workprocess continuosly read the table REPORTEXT.
Please suggest me How to get the sap logon screen?
what may be problem?
Thanks
Ganesh -
Netweaver 2004s BI installation stuck in "check ddic password"
Hello
iam installing netweaver 2004s BI .The installation is stuck on phase 27 of 95 " check ddic password " .
i have tried with the master password as well as ddic standard password ,but still it is not continuing.
could any body help me in doing so.
ESWAR.Hi,
While doing the system copy I am getting the similar error like "Test logon to SAP system <sid> failed. Make sure that the user DDIC exists and that the password of the user DDIC is correct". I tried to login to the system with the users DDIC and SAP* but it is giving the error "DB-error - 0" in the bottom of the screen.
I have included the parameter login/no_login_sapstar=0 in the instance profile and restarted the instance. Now I am able to login to all the clients with SAP* user id with the password 'pass' and changed the password of the user DDIC to its default. I tried to login to the system, but still the same error. I tried to continue the installation but still it is showing the same error message "Test logon to SAP system <sid> failed. Make sure that the user DDIC exists and that the password of the user DDIC is correct".
Could you please suggest me the solution for this issue.
Thanks in Advance.
Kind regards,
Mogileeswar -
Hi guys,
During installation at phase 27 i received msg check ddic password .. i clicked on ok.. and installation continued..but now when i try to login using SAP* or DDIC it is not accepting.
how to solve it..!!Hi,
did you use default passwords
DDIC - 19920706
SAP* - 07071992
Please look at this
[Re: Check DDIC Password;
[http://sap.ittoolbox.com/groups/technical-functional/sap-basis/check-ddic-password-2397340]
Regards,
Muralidhar -
when i was presented with the screen of DDIC password, i wrote the wrong one, so i now i have a mess with my passwords.
I can access to the 000 client with SAP* and DDIC, the both of them are reseted to the default passwords, but i can't log on to the 001 client, the both users (SAP* and DDIC) are locked, so i can't enter the sistem to reset them.
Anyway, now i restart the installation and have this error:
"Test logon to SAP System ALH failed.
Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
The sistem is running, both cients are in green!
I tried to run the reports RSWBOINS and RADDBDIF as some guys on thi forum suggested, but no luck
Any ideas??Go to database level and reset the password for SAP* for client 001
update <DB schema>.USR02 set UFLAG = 0 where MANDT = <client number> and BNAME = u2018SAP*u2019;
With the above query you can unlock SAP* and if you know the password you are able to logon to that client.
if still you do not able to logon to that client
delete the User SAP* with below query
delete from <DB schema>.USR02 where bname like 'SAP*' and MANDT like '001'
than you can able to logon to that client with SAP* and use default password "pass".
after that you can change the password for DDIC from SU01.
This will help you. -
Why they deleted my iCloud account? I have an account with yahoo, and removed my account, not reset my password, and do the steps to reset password, when I put my date of birth does not accept, please i need that account, because I have iphone 4 in that account and I can not activate the iphone
Hello Jbug0409,
Welcome to Apple Support Communities.
It sounds like you’re running into an Apple ID password issue on your iPod touch, and you’ve created another account which you weren’t able to verify because you didn’t receive the verification email.
Try resetting the Apple ID password for the account that’s already on your iPod touch as shown here:
If you forgot your Apple ID password - Apple Support
Also, take a look at this article which provides troubleshooting suggestions that’ll resolve most issues receiving verification emails.
If you didn't receive your verification or reset email - Apple Support
So long,
-Jason -
Installation error at CHECK DDIC PASSWORD
Hi,
I am installation SAP ECC on MSCS. my installation till enqueue replication server went well but when i install the CI instace on node A it throws me out at CHECK PASSWORD STEP. the log is below please suggest.
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:215]
CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.762 NWDialogInstance.getRFCUser(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.762 NWUsers.getAccountData(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.762 NWUsers.haveAccountData(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.777 NWUsers.haveAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.777 NWUsers._readAccountData(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.777 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers._isSystemRead() done: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers._readAccountData() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers.getMasterPassword()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers._useMasterPasswordForAccountData(DDIC.000)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers._useMasterPasswordForAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWUsers.getAccountData():
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-12-11 18:42:12.793 NWDialogInstance.getRFCUser() done
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value node1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 01.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2006-12-11 18:42:12 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Password logon no longer possible - too many failed attempts
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value node1.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 01.
INFO 2006-12-11 18:42:12 [iaxxrfcimp.cpp:520]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2006-12-11 18:42:12 [iaxxrfcimp.cpp:433]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE [iaxxrfcimp.cpp:434]
CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE [iaxxrfcimp.cpp:436]
CAbRfcImpl::openRfcConn
Password logon no longer possible - too many failed attempts
TRACE [iaxxbjsmod.cpp:657]
CJSlibModule::showOkCancelBox_impl()
<html>Test logon to SAP System AP0 failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
TRACE [iaxxcnclhd.cpp:83]
doHandleDoc()
ACTION_CANCEL requested
TRACE [iaxxcnclhd.cpp:657]
doHandleDoc()
<html><head></head><body> You are about to cancel the <b>SAP ERP 2005 Support Release 1 > SAP Systems > MaxDB > High-Availability System > Based on AS ABAP > Central Instance </b> installation.<li>Choose one of the following:</li><ul> <li>Continue - to continue the installation.</li> <li>Stop - to stop the installation and exit SAPinst. You can continue the installation later from this point.</li></ul>Notes:<ul> <li> If you stop the installation after the installation activities had started, do not use the <b>SAP ERP 2005 Support Release 1 > SAP Systems > MaxDB > High-Availability System > Based on AS ABAP > Central Instance </b>, as it is not ready to be used.</li></ul></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
please let me know is there anything worng am doing or more info on this error.
its urgent and help on this is apperocated
Cheers
ArunHi Everyone,
The error is related to Kernel, Just get rid of all this and try updating the kernel to the latest one.
The db error is not seen again at the step where the installation was stopped.
Also, this error is at the step of updtaing sapview.tsk when you use wrong kernel & this get conflicted to the DB which is of not the version to be. So simple if your DBload step is in sucess & kernel is outdated sync to the lates one.
Then reatart the Sapmmc, login with SAP*- 06071992 & DDIC - 19920706, hope u know the rest:>
Rate the forum
Thanks & Regards,
Chetan Poojary. -
Guyz,
i installed nw04s system with AS ABAPBI JAVAEP+EPC on MS SQL server ....its IDES software btw...
everything went fine till 'Import ABAP' and even 'Running ABAP Reports' proces.... but while running the process 'Check DDIC Password', it popped a window with OK and Cancel saying that
test logon to SAP system SID failed .Make sure that the system is started that the user DDIC exists and the password of user DDCI is correct
I dont udnerstand why it would fail to logon to DDIC on client 000.... becoz i set the master password and SAPInst should remember the password in some encrypted form and use the same for logging .!!!!
anyways after this error, i started SAPMMC and logged into the system and tried DDIC in 000, 001 with master password and default password (19920706) as well with no luck...but worked fine in client 800 with my master password....
What should i do now ? any suggestions would be highly appreciated....
ThanksActually SAPInst is trying to connect to client 001 with DDIC...so I deleted SAP* from 001 client in sqlplus and restarted the server and tried logging with ddic in 001 with my master password, PASS, pass, and even with 06071992 with no luck...
any other suggestions ?
Edited by: Kasu on Mar 27, 2008 5:18 PM -
DDIC Password fails in middle of Solution Manager Installation
I'm performing a new install of Solution Manager 7.0 (4.0) on HPUX IA64 11.23. This is a brand new Landscape. The installation has halted at phase 29/47 "Check DDIC password", and reports the error:
Test login to SAP System SMA failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.
From the SAPGUI 7.10., I was unable to login as DDIC or SAP. I used the master passwords given in the install. I also tried the default passwords as mention in another thread password '19920706' for DDIC and '06071992' for SAP.
I was able to login with SAP* password PASS after adding login/no_automatic_user_sapstar=0
to the default profile and restarting SAP, but was unable to change the DDIC password because change and transport system not configured.
How do I get past this point in the installation process?This problem is now resolved. The problems of:
1) The "Check DDIC password" phase of sapinst of SM 7.0 was failing with DB-Error 0.
Fix: Install latest kernel patch. Problem was fixed with NW 7.0 kernel patch 133. I installed kernel patch 159. The kernel patch had to be installed via the old method of using SAPCAR to untar the files, backup kernel dir, shutdown sap, and copy files over to kernel dir. See note 19466.
2) The Warning messages
WARNING => IcmJ2EEScheduleFunc: Cannot
access "/sap/public/icman" -
please check node in TA sicf [icxxman_mt.c 2206]
was resolved by TA SICF by SERVICE HOST -> active
to activate the complete default_host subtree. -
my password is no longer working.. I did NOT change it. I requested that it be re-rest and it would email me the steps to re-set. I've done this several times... I dont get the email w/ instructions.. Ive checked spam folder also.. please help
You can send iTunes an email about your password and they can reset it on their end and email you the temp password. When they reset the password they usually make it something generic like Apple06.11
You can email them here: http://www.apple.com/support/itunes/contact.html?form=el&topic=Express%20Lane%20 inquiry
If they don't get back to you, you can also call AppleCare: 1-800-275-2273 and see if they are able to reset.
Hope that helps. -
My gmail account has stopped working on my iphone, saying the user name or password is incorrect, but both are definitely correct. I have tried restarting the phone, deleting the account and setting it up again, and checked that I can log on through safari. It had been working fine until this morning! Any ideas how to fix this?
Turn off 2 step authentication on your gmail account in a browser. It should work fine afterwards.
-
I forgot my password and follow the steps but my email did not received the reset password email
I forgot my old apple password and I follow the steps for reset my password. But my frustration is when i login my email there was no email on resetting my password.
I've never received reset password emails.
Despite waiting 24hrs (as some forum posts had suggested it takes a bit of time to come through). So I created new account using a new email.
But now I have the same problem on a different account, and still nothing received. I've checked spam folder and email server but nothing is received. Other emails from Apple have been received, when I added voucher and when I registered to this forum.
So if anyone else has found a resolution I would be most interested also. -
I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File ->Library ->Organize library. I am suppose to check mark both boxes there, the first being "Consolidate Files" & the second being "Reorganize files in the folder 'Itunes Media'. I am able to checkmark the first box but It won't allow me to check mark the second box, why? How can i fix this? Please help!
Well you must have made a mistake somewhere. The last instruction of step four reads:
When you've found your iTunes library folder, drag that folder to your external hard drive. This will begin the iTunes backup. The amount of time the backup will take depends on the size of your library. When the transfer is done, your backup is complete and your external hard drive can be disconnected.
Normally dragging content from to a new location on a different drive will result in a copy action which is what you were supposed to do. At a guess you somehow managed to move the iTunes folder. Then when you started iTunes it created a new blank library for you assuming it had just been installed rather that raising a warning.
Close iTunes. Rename the iTunes folder on the internal drive as iTunes (Empty) then copy the iTunes folder from the external back into the User's Music folder. Start iTunes. All should be well.
When you've made sure it all works please read my User Tip and use that method to backup in future. Since you already have a folder with the backup in place you can skip the "Make New" operation in the fourth step and simply choose the external folder.
tt2
Maybe you are looking for
-
How can i update an html web page from Labview?
I intend to publish the "status" of an experiment online through an web page. I mean, if my vi is running i would like to have a phrase or indicator set on at my web page. If my Vi is not running i would like this indicator set off. This page is host
-
How to view my hp high definition built in web cam to others from touchsmart 310-1110
Product # XS988EA Sl # CZC1027HP2
-
Hi, I've developed a dynpro application which accesses a backend SAP system, sends a variant value and gets results as table. When I run the RFC function module inside SAP system, result displayed as follow: WEMNG MEI BAKORAN TOB 1.582,5
-
Help on collecting utility feature to report resource control limits
Hi , I am working on this bug fix http://bugs.opensolaris.org/view_bug.do?bug_id=6628879 Could you please tell me some features such a utility should have the customer hasn't mentioned the spec clearly.
-
hi all I created a role and given few authorizations on the role. The main purpose of that role is to execute and create queries on few cubes. Now after assigning the role to the users, the users are able to create, delete and execute the queries on