Stuck at import ABAP

Hello All,
I am installing SAP NetWeaver 7.01 SR1 ABAP Trial Version .
Everything went fine until Step 18 of 27 Import ABAP
It got stuck at that step and nothing happens.
I waited for more than an hour.
What should I do?
Thanks
George

After waiting for several hours I see the following on the status bar:
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28
The status bar did progress.
But still this is too long!
It is still stuck in the step Import ABAP

Similar Messages

Got stuck at import abap phase during system installation from system copy

hi,
we have ECC6 ehp4 sp5 level system (linux + db2), due to some reasons our quality system was crashed, we took homogeneous system copy of Production server through sapinst and now we are restoring in Quality server through sapinst. during import ABAP phase its taking long time to pass and system message its showing is
waiting 6134 minites for DDL template file DDLDB6.tpl in dump directories.
i stopped installation and once again started restoration through system copy. Now the system go stuck at the same phase

Hi,
AFAIK, report SMIGR_CREATE_DDL should be run in se38 before starting the export. This generates the required DDL statements which are needed for system copy.
For more info, refer system copy guide in http://service.sap.com/instguides. Hope this helps.
Rgds,
Soujanya

System copy stuck on "Import ABAP" with "Invalid Migration Key"

Dear Team,
I'm performing a system copy from AS400/DB2 (of our ECC DEV) to AIX/DB2. Export has been completed successfully, while importing it is stuck on the "Import ABAP" phase with error "Invalid Migration Key". However the key is generated with correct parameters only and even we have tried the key from SAP NOTE: 1768158 but of no use.
Below is brief about systems environment:
Source System
OS : AS/400 (IBM i-Series V6R1)
DB : DB/400 (Integrated DB with IBM i)
NW: NW 7.00 ( ECC 6.0 with SP11)
Target System
OS : AIX 7.1
DB: DB2 10.1 with FP3
NW: NW 7.00 ( ECC 6.0 with SP11)
The process is being performed using SWPM SP05
Kindly find the test_MIGKEY.log for analysis and let me know if any ideas.
Thanks in advance,
SUJIT

I found below error , are you doing this in distributed environment ?
Is source and target kernels are same ?
Found error in the log.
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR: invalid migration keybut the system wrote other errors instead, for example, (DB) ERROR: db_connect rc = 256, this does not involve an incorrect migration key. The errors should refer here to the actual cause (for example, the connect to the DB does not work). In this case, first check the database connect with the command <Z2 R3trans -x or R3load -testconnect, that must be executed as <sid>adm.Also make sure that the R3load that is used during the export and import has the same kernel release (for example, 7.00). You can check the relevant version of the R3load using 'R3load -version'.
===================

SAP Netweaver 7.3 Installation stuck at import abap

Hi all,
I am trying to do a new installation of NW 7.3 by importing data from a system copy.
At the phase "import ABAP" the installation gets an error on step 32 (or something like that), then it continues but at the last 2 jobs it seems stucked.
Now I have this situation: running 1, waiting 1, completed 42, failed 1.
I am new to this operation, can you please help me?
In attach the import log and the error that is generated near step 32.

Hi Luca
Could you refer the SAP Notes for Sql error 1750, 4902 1088
1752579 - SQL error 10011 Access denied
1170869 - Duplicated primary keys during system copy via R3Load
BR
SS

Import ABAP Stuck ECC 6.0 installation

I am installing ECC 6.0 on Windows and Max DB. It is stuck on Import ABAP step. It is almost two days now and doing nothing.
I tried to execute command as per OSS 814704. Comand is not working.
02 May 2006 ABAP/ABAP+Java: Installation Stuck in Load Phase
Problem
The installation sometimes gets stuck in the ABAP "Load Data" phase. No more entries are written to the log files. No problems are apparent with the database.
Solution
Enter the following SQL command as database user SAP<SID>, either from SQL Studio or from a dbmcli session:
CHECK TABLE "/MAXDB/INDEXSTATEMENTS" WITH LONG CHECK
This automatically frees up the load.
Thanks

> I tried to execute command as per OSS 814704. Comand is not working.
You get an error message?
Markus

Error in SAP installation in phase 19 of 34 - Import ABAP

Hi SAP Gurus,
Good day all, I'm facing problem when installing SAP ECC 6.0 EHP7 (IDES version). Its stucked in phase 19 of 34 Import ABAP.
Below are the error details:-
ECC Message Box
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
Choose Retry
to repeat the current step.
Choose Log Files
to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
Below are the logs from R3load.exe:-
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:31:32
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 4612
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
Looking forward for your reply.
Regards,
Jay
-96-

Hi
I'm afraid you forget selecting the SSFS option during installation and it is the only connection method supported for kernel 7.40
It should be possible to fix this manually and perform all the step to connect using SSFS... but restarting your installation might be faster & easier.
1622837 - Secure connection of AS ABAP to Oracle via SSFS
As of SAP Kernel Release 7.40 (irrespective of the Oracle version), only the secure connection (secure connect) is supported via SSFS.
Regards

System copy: import abap phase

Hi Guys,
While performing system copy I am facing issue in import abap phase, pasting the log for your reference:
SAPSSEXC_26.log
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_26.cmd -dbcodepage 4103 -l SAPSSEXC_26.log -loadprocedure fast
(DB) INFO: connected to DB
(GSI) INFO: dbname   = "<SID>SAPDEMO\<SID>                                                                                "
(GSI) INFO: vname    = "MSSQL                           "
(GSI) INFO: hostname = "SAPDEMO\<SID>                                                     "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SAPDEMO"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "8x AMD64 Level 6 (Mod 30 Step 5)"
(DB) ERROR: DDL statement failed
(DROP INDEX [TTREEI].[TTREEI~NOD])
DbSlExecute: rc = 103
(SQL error 3701)
error message returned by DbSl:
Cannot drop the index 'TTREEI.TTREEI~NOD', because it does not exist or you do not have permission.
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE INDEX [TTREEI~NOD] ON [TTREEI] ( [NODE_ID] ) )
DbSlExecute: rc = 99
(SQL error 3621)
error message returned by DbSl:
Warning: Fatal error 824 occurred at Sep 24 2010 12:45AM. Note the error and time, and contact your system administrator.
The statement has been terminated.
(DB) INFO: disconnected from DB
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100924004524
ECC 6.0 SR2
MSSQL2005
Please suggest asap.
Regards,
Mridul Gupta

Hi,
After moving further I got stuck in Install Java Engine phase
Extracting packed root JAR
ERROR: Error during installation of SDM on D:\usr\sap\W6V\DVEBMGS15\SDM\program
ERROR: Cannot extract D:\usr\sap\W6V\DVEBMGS15\SDM_tmp\pack\packedRoot.jar to D:\usr\sap\W6V\DVEBMGS15\SDM\root: Cannot extract JAR:
Error: Could not extract file origin/com.adobe/PDFManipulation/Adobe Systems/0/705.20060314112518.106587/adobe-PDFManipulation.sda from archive D:/usr/sap/W6V/DVEBMGS15/SDM_tmp/pack/packedRoot.jar
Additional error message is:
invalid entry CRC (expected 0xc596dc9d but got 0xcb9ef375)
Processing error. Return code: 4
Please suggest.
Regards,
Mridul Gupta

SAPNWABAP701SR1_TRIAL installation - Phase 18 Import ABAP never ends

Hi all!
I already checked this discussion in the forum but it doesn't seem to be a only-way resolution.
I am trying to install SAPNWABAP701SR1_TRIAL and the computer spent the hole night just at the 18th phase (Import ABAP). At the status bar says: "Import monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28".
At my first try i thought it was the RAM size or the virtual memoty but now they are 1.6GB and 4GB respectivelly.
For what i read i list possible problems:
- JRE version is 1.4.2_11
- JDK is not installed, just the JRE
- enviroment variables are not set
- loopback interface's ip address is 192.168.1.7 (and not 10.10.10.1) as my local network is 192.168.1.0
the host file is like that:
192.168.1.7 myHostName
please can anyone can tell me if this items might be the reason why i can't complete the installation?
Thank you a lot!.
Edited by: Fabio Luiz Esperati Pagoti on Jun 12, 2009 2:38 PM

Hi Fabio,
I too had the same problem. During my first run, I waited for 2-3 hrs and since there was no progress, I ended the installation. After much trouble, I started again and this time, when the installation was (seemingly) stuck at this step, I thought of checking the logs and I saw that infact processing was happening in the background. For me it took 7 hours 30 minutes for this to be completed. So be patient and the installation will proceed.
When this step is running, you can see the status using the log file: C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\import_monitor.log. There you will find lines like:
Loading of 'DOKCLU' import package is started.
Loading of 'SAPSSEXC_1' import package is started.
and so on......
In the same folder you will see log files with these names (DOKCLU, SAPSSEXC_1, etc). If you continuously review them, you can see the progress.
Regards
Ranjith

SAP Ides ECC 6.0 Install: Import ABAP - Package SAPDODS Error - ORA-00903

Experts,
Good Morning!
I'm trying to install SAP IDES ECC 6.0 version on a Windows 2008 R2 Server with Oracle 11g DB (11.2).
System Info: 16GM RAM & 600GB Hdd. Prereqs passed.
I'm getting the following error during the Import ABAP phase (16 of 29) in the sapinst log:
"An error occurred while processing option Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. "
Here's the dump of import_monitor.java.log
java version "1.4.2_32"
Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.012)
SAP Java Server VM (build 4.1.012 1.6-b03, Oct 21 2011 14:18:45 - 41_REL - optU - windows amd64 - 6 - bas2:161688 (mixed mode))
Import Monitor jobs: running 1, waiting 1, completed 141, failed 0, total 143.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 141, failed 1, total 143.
Here's the dump of import_monitor.log:
INFO: 2014-07-05 13:42:53
Data codepage 4103 is determined using TOC file 'C:\Target\Export1\DATA\D010TAB.TOC' for package 'D010TAB'.
TRACE: 2014-07-05 13:42:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is started.
TRACE: 2014-07-05 13:42:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' import package into database:
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
ERROR: 2014-07-05 13:42:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process 'C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2014-07-05 13:43:21
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2014-07-05 13:43:21
1 error(s) during processing of packages.
INFO: 2014-07-05 13:43:21
Import Monitor is stopped.
Here's the log of SAPDODS...
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140705134253
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Aug 16 2011 02:26:36
patchinfo (patches.h): (0.098) DB6: correction for R3load PL 91 on HP-UX and SOLARIS (note 1609719)
process id 1488
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file C:\Target\Export1\DB/SQLFiles.LST
(SQL) INFO: C:\Target\Export1\DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file DODS.SQL
(SQL) INFO: DODS.SQL not found
(SQL) INFO: Searching for SQL file C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: found C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: Trying to open C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: C:\Target\Export1\DB/ORA/DODS.SQL opened
(DB) ERROR: DDL statement failed
(DROP TABLE "/BI0/APERS_BOD00")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 903 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00903 occurred at SQL stmt (parse error offset=15)
(DB) ERROR: DDL statement failed
( CREATE TABLE [/BI0/APERS_BOD00] ( [TCTUSERNM] nvarchar(000012) NOT NULL , [TCTOBJVERS] nvarchar(000001) NOT NULL , [TCTSYSID] nvarchar(000010) NOT NULL , [TCTQUACT] nvarchar(000001) NOT NULL , [TCTOBJNM] nvarchar(000040) NOT NULL , [TCTTLOGO] nvarchar(000004) NOT NULL , [RECORDMODE] nvarchar(000001) NOT NULL , [TCTTIMSTMP] nvarchar(000014) NOT NULL ) WITH ( DATA_COMPRESSION = PAGE ) )
DbSlExecute: rc = 99
(SQL error 903)
error message returned by DbSl:
ORA-00903: invalid table name
(DB) INFO: disconnected from DB
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140705134254
FYI - A retry does not help. Also tried to search for the error on scn, google but haven't been able to find the right solution.
Can you help?
Regards,
Cobain.

Divyanshu - sorry to ask but can you explain why i need to update r3load and r3trans to resolve this error? Just want to understand why I'm doing a correction so I can learn from the same.
Also, can you clarify the file update process:
For R3load:
a) the r3load used by the command is dated 8/16/2011 (location:C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\...)
b) the r3load i have in my db folder is dated 10/23/2011 (location:C:\Final\Installer\BS7i2011_Installation_Master_\DATA_UNITS\BS2011_IM_WINDOWS_X86_64\ORA\UC\...)
Do i replace (a) with (b)?
For R3trans:
How do I update this file?
- Cobain.

Import ABAP error in ERP 2005 SR2 IDES installation

Hi Experts
               I am trying to install the SAP ERP 2005 SR2 ( OS is 2003 and Database is Oracle 10g )IDES which i downloaded from the SAP market place and got
the following error at the IMPORT ABAP task
INFO 2008-02-20 14:19:37
Output of C:\Program Files\Java\j2re1.4.2_16\bin\java.exe -classpath migmon.jar -showversion
com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\ERP 2005 IDES\51032413_1\EXP1;
D:\ERP 2005 IDES\51032413_2\EXP2;D:\ERP 2005 IDES\51032413_3\EXP3;D:\ERP 2005 IDES\51032413_4\EXP4;
D:\ERP 2005 IDES\51032413_5\EXP5;D:\ERP 2005 IDES\51032413_6\EXP6;D:\ERP 2005 IDES\51032413_6\EXP7;
D:\ERP 2005 IDES\51032413_6\EXP8;D:\ERP 2005 IDES\51032413_6\EXP9;D:\ERP 2005 IDES\51032413_6\EXP10;
D:\ERP 2005 IDES\51032413_6\EXP11" -installDir C:\PROGRA1\SAPINS1\ERP\SYSTEM\ORA\CENTRAL\AS
-orderBy "" -r3loadExe D:\usr\sap\SRD\SYS\exe\nuc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 1100
-jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2008-02-20 14:31:07
Execution of the command "C:\Program Files\Java\j2re1.4.2_16\bin\java.exe -classpath migmon.jar -showversion
com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\ERP 2005 IDES\51032413_1\EXP1;
D:\ERP 2005 IDES\51032413_2\EXP2;D:\ERP 2005 IDES\51032413_3\EXP3;D:\ERP 2005 IDES\51032413_4\EXP4;
D:\ERP 2005 IDES\51032413_5\EXP5;D:\ERP 2005 IDES\51032413_6\EXP6;D:\ERP 2005 IDES\51032413_6\EXP7;
D:\ERP 2005 IDES\51032413_6\EXP8;D:\ERP 2005 IDES\51032413_6\EXP9;D:\ERP 2005 IDES\51032413_6\EXP10;
D:\ERP 2005 IDES\51032413_6\EXP11" -installDir C:\PROGRA1\SAPINS1\ERP\SYSTEM\ORA\CENTRAL\AS
-orderBy "" -r3loadExe D:\usr\sap\SRD\SYS\exe\nuc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 1100
-jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103.
Output: java version "1.4.2_16"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)Java HotSpot(TM)
Client VM (build 1.4.2_16-b05, mixed mode)Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERRORImport Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
ERROR 2008-02-20 14:31:07
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-02-20 14:31:07
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW
CreateDBandLoad|ind|ind|ind|ind|10|0|NWABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor
was executed with status ERROR .
can anyone help me to fix this error. Installation of ECC 6.0 with SQL SERVER 2005 was done fine.
Thanking you
Regards
Mrudul

Hi Mrudul,
   Understood you have downloaded the completed IDES SAP 2005 SR2 package, i have also downloaded it several months ago, but i found the package not full good when i prepare to install it last week, 3 of 35 Exp unpackage CRC32 error(51032413_part15.rar & 51032413_part16.rar & 51032413_part17.rar) when unpackage them, can you do me a favor to share me the 3 rar files? As the original download address have been obsoleted away service.sap.com, i can tell you my FTP site to store them.
51032413_part15.rar & 51032413_part16.rar & 51032413_part17.rar
Or 51032413_3\EXP3\DATA\SAPAPPL1.009 & SAPAPPL1.010
12/17/2006 02:32 AM     1,048,576,000 SAPAPPL1.009
12/17/2006 02:42 AM       954,643,456 SAPAPPL1.010
Tks!
Best rds,
Jeff
msn: [email protected]

Error in import abap step while importing system copy.

Hi All,
My colleague had taken System copy of development server, few days back. it was completed successfully,
now we want to restore that system copy, as hardware failed. But when we start the import of system copy,
all ABAP jobs are failing in import abap step, Some DDL statement problem. can u pls help wht to do.
I found in some forums, SMIGR_create_DDL report need to be generated prior to taking system copy, but he
didnt taken tht.
OS: Windows 2003
DB: DB2
Pls find sapinst.log
INFO 2009-10-27 10:43:06.890
Output of C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2009-10-27 10:53:37.125
Execution of the command "C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 63, completed 0, failed 0, total 64.
Import Monitor jobs: running 2, waiting 62, completed 0, failed 0, total 64.
Import Monitor jobs: running 3, waiting 61, completed 0, failed 0, total 64.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 61, completed 0, failed 1, total 64.
Loading of 'D010TAB' import package: ERROR
Import Monitor jobs: running 1, waiting 61, completed 0, failed 2, total 64.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 0, waiting 61, completed 0, failed 3, total 64.
Import Monitor jobs: running 1, waiting 60, completed 0, failed 3, total 64.
Import Monitor jobs: running 2, waiting 59, completed 0, failed 3, total 64.
Import Monitor jobs: running 3, waiting 58, completed 0, failed 3, total 64.
Loading of 'DYNPSOURCE' import package: ERROR
Import Monitor jobs: running 2, waiting 58, completed 0, failed 4, total 64.
Loading of 'SAPAPPL1_4' import package: ERROR
Import Monitor jobs: running 1, waiting 58, completed 0, failed 5, total 64.
Loading of 'SAPAPPL2_2' import package: ERROR
Import Monitor jobs: running 0, waiting 58, completed 0, failed 6, total 64.
Import Monitor jobs: running 1, waiting 57, completed 0, failed 6, total 64.
Import Monitor jobs: running 2, waiting 56, completed 0, failed 6, total 64.
Import Monitor jobs: running 3, waiting 55, completed 0, failed 6, total 64.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 2, waiting 55, completed 0, failed 7, total 64.
Loading of 'SAPSSEXC_9' import package: ERROR
Import Monitor jobs: running 1, waiting 55, completed 0, failed 8, total 64.
Loading of 'SAPSSEXC_8' import package: ERROR
Import Monitor jobs: running 0, waiting 55, completed 0, failed 9, total 64.
Import Monitor jobs: running 1, waiting 54, completed 0, failed 9, total 64.
Import Monitor jobs: running 2, waiting 53, completed 0, failed 9, total 64.
Import Monitor jobs: running 3, waiting 52, completed 0, failed 9, total 64.
Loading of 'SAPAPPL2_6' import package: ERROR
Import Monitor jobs: running 2, waiting 52, completed 0, failed 10, total 64.
Loading of 'SAPAPPL1_3' import package: ERROR
Import Monitor jobs: running 1, waiting 52, completed 0, failed 11, total 64.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 52, completed 0, failed 12, total 64.
Import Monitor jobs: running 1, waiting 51, completed 0, failed 12, total 64.
Import Monitor jobs: running 2, waiting 50, completed 0, failed 12, total 64.
Import Monitor jobs: running 3, waiting 49, completed 0, failed 12, total 64.
Loading of 'D010INC' import package: ERROR
Import Monitor jobs: running 2, waiting 49, completed 0, failed 13, total 64.
Loading of 'SAPAPPL1_2' import package: ERROR
Import Monitor jobs: running 1, waiting 49, completed 0, failed 14, total 64.
Loading of 'SAPAPPL1_7' import package: ERROR
Import Monitor jobs: running 0, waiting 49, completed 0, failed 15, total 64.
Import Monitor jobs: running 1, waiting 48, completed 0, failed 15, total 64.
Import Monitor jobs: running 2, waiting 47, completed 0, failed 15, total 64.
Import Monitor jobs: running 3, waiting 46, completed 0, failed 15, total 64.
Loading of 'SAPSSEXC_2' import package: ERROR
Import Monitor jobs: running 2, waiting 46, completed 0, failed 16, total 64.
Loading of 'DYNPLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 46, completed 0, failed 17, total 64.
Loading of 'SAPSSEXC_5' import package: ERROR
Import Monitor jobs: running 0, waiting 46, completed 0, failed 18, total 64.
Import Monitor jobs: running 1, waiting 45, completed 0, failed 18, total 64.
Import Monitor jobs: running 2, waiting 44, completed 0, failed 18, total 64.
Import Monitor jobs: running 3, waiting 43, completed 0, failed 18, total 64.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 2, waiting 43, completed 0, failed 19, total 64.
Loading of 'SAPAPPL2_14' import package: ERROR
Import Monitor jobs: running 1, waiting 43, completed 0, failed 20, total 64.
Loading of 'SAPAPPL0_2' import package: ERROR
Import Monitor jobs: running 0, waiting 43, completed 0, failed 21, total 64.
Import Monitor jobs: running 1, waiting 42, completed 0, failed 21, total 64.
Import Monitor jobs: running 2, waiting 41, completed 0, failed 21, total 64.
Import Monitor jobs: running 3, waiting 40, completed 0, failed 21, total 64.
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 2, waiting 40, completed 0, failed 22, total 64.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 1, waiting 40, completed 0, failed 23, total 64.
Loading of 'SAPAPPL2_10' import package: ERROR
Import Monitor jobs: running 0, waiting 40, completed 0, failed 24, total 64.
Import Monitor jobs: running 1, waiting 39, completed 0, failed 24, total 64.
Import Monitor jobs: running 2, waiting 38, completed 0, failed 24, total 64.
Import Monitor jobs: running 3, waiting 37, completed 0, failed 24, total 64.
Loading of 'SAPSSEXC_7' import package: ERROR
Import Monitor jobs: running 2, waiting 37, completed 0, failed 25, total 64.
Loading of 'SAPAPPL0_7' import package: ERROR
Import Monitor jobs: running 1, waiting 37, completed 0, failed 26, total 64.
Loading of 'SAPAPPL0_1' import package: ERROR
Import Monitor jobs: running 0, waiting 37, completed 0, failed 27, total 64.
Import Monitor jobs: running 1, waiting 36, completed 0, failed 27, total 64.
Import Monitor jobs: running 2, waiting 35, completed 0, failed 27, total 64.
Import Monitor jobs: running 3, waiting 34, completed 0, failed 27, total 64.
Loading of 'SAPAPPL2_7' import package: ERROR
Import Monitor jobs: running 2, waiting 34, completed 0, failed 28, total 64.
Loading of 'SAPAPPL2_4' import package: ERROR
Import Monitor jobs: running 1, waiting 34, completed 0, failed 29, total 64.
Loading of 'SAPAPPL1_6' import package: ERROR
Import Monitor jobs: running 0, waiting 34, completed 0, failed 30, total 64.
Import Monitor jobs: running 1, waiting 33, completed 0, failed 30, total 64.
Import Monitor jobs: running 2, waiting 32, completed 0, failed 30, total 64.
Import Monitor jobs: running 3, waiting 31, completed 0, failed 30, total 64.
Loading of 'SAPAPPL0_3' import package: ERROR
Import Monitor jobs: running 2, waiting 31, completed 0, failed 31, total 64.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 1, waiting 31, completed 0, failed 32, total 64.
Loading of 'SAPAPPL0_8' import package: ERROR
Import Monitor jobs: running 0, waiting 31, completed 0, failed 33, total 64.
Import Monitor jobs: running 1, waiting 30, completed 0, failed 33, total 64.
Import Monitor jobs: running 2, waiting 29, completed 0, failed 33, total 64.
Import Monitor jobs: running 3, waiting 28, completed 0, failed 33, total 64.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 2, waiting 28, completed 0, failed 34, total 64.
Loading of 'ENHOBJCONTRACT' import package: ERROR
Import Monitor jobs: running 1, waiting 28, completed 0, failed 35, total 64.
Loading of 'SAPAPPL0_4' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 36, total 64.
Import Monitor jobs: running 1, waiting 27, completed 0, failed 36, total 64.
Import Monitor jobs: running 2, waiting 26, completed 0, failed 36, total 64.
Import Monitor jobs: running 3, waiting 25, completed 0, failed 36, total 64.
Loading of 'SAPSSEXC_1' import package: ERROR
Import Monitor jobs: running 2, waiting 25, completed 0, failed 37, total 64.
Loading of 'SAPSSEXC_6' import package: ERROR
Import Monitor jobs: running 1, waiting 25, completed 0, failed 38, total 64.
Loading of 'SAPAPPL2_8' import package: ERROR
Import Monitor jobs: running 0, waiting 25, completed 0, failed 39, total 64.
Import Monitor jobs: running 1, waiting 24, completed 0, failed 39, total 64.
Import Monitor jobs: running 2, waiting 23, completed 0, failed 39, total 64.
Import Monitor jobs: running 3, waiting 22, completed 0, failed 39, total 64.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 0, failed 40, total 64.
Loading of 'SAPAPPL2_1' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 0, failed 41, total 64.
Loading of 'SAPAPPL1_5' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 0, failed 42, total 64.
Import Monitor jobs: running 1, waiting 21, completed 0, failed 42, total 64.
Import Monitor jobs: running 2, waiting 20, completed 0, failed 42, total 64.
Import Monitor jobs: running 3, waiting 19, completed 0, failed 42, total 64.
Loading of 'REPOTEXT' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 0, failed 43, total 64.
Loading of 'SAPAPPL0_5' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 0, failed 44, total 64.
Loading of 'SAPAPPL2_9' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 0, failed 45, total 64.
Import Monitor jobs: running 1, waiting 18, completed 0, failed 45, total 64.
Import Monitor jobs: running 2, waiting 17, completed 0, failed 45, total 64.
Import Monitor jobs: running 3, waiting 16, completed 0, failed 45, total 64.
Loading of 'SAPSSEXC_10' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 0, failed 46, total 64.
Loading of 'SAPAPPL2_3' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 0, failed 47, total 64.
Loading of 'SAPAPPL0_6' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 0, failed 48, total 64.
Import Monitor jobs: running 1, waiting 15, completed 0, failed 48, total 64.
Import Monitor jobs: running 2, waiting 14, completed 0, failed 48, total 64.
Import Monitor jobs: running 3, waiting 13, completed 0, failed 48, total 64.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 0, failed 49, total 64.
Loading of 'SAPAPPL0_9' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 0, failed 50, total 64.
Loading of 'SAPAPPL2_11' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 0, failed 51, total 64.
Import Monitor jobs: running 1, waiting 12, completed 0, failed 51, total 64.
Import Monitor jobs: running 2, waiting 11, completed 0, failed 51, total 64.
Import Monitor jobs: running 3, waiting 10, completed 0, failed 51, total 64.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 0, failed 52, total 64.
Loading of 'SAPAPPL2_13' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 0, failed 53, total 64.
Loading of 'SAPAPPL2_12' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 0, failed 54, total 64.
Import Monitor jobs: running 1, waiting 9, completed 0, failed 54, total 64.
Import Monitor jobs: running 2, waiting 8, completed 0, failed 54, total 64.
Import Monitor jobs: running 3, waiting 7, completed 0, failed 54, total 64.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 0, failed 55, total 64.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 0, failed 56, total 64.
Loading of 'SAPAPPL1_1' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 0, failed 57, total 64.
Import Monitor jobs: running 1, waiting 6, completed 0, failed 57, total 64.
Import Monitor jobs: running 2, waiting 5, completed 0, failed 57, total 64.
Import Monitor jobs: running 3, waiting 4, completed 0, failed 57, total 64.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 0, failed 58, total 64.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 0, failed 59, total 64.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 0, failed 60, total 64.
Import Monitor jobs: running 1, waiting 3, completed 0, failed 60, total 64.
Import Monitor jobs: running 2, waiting 2, completed 0, failed 60, total 64.
Import Monitor jobs: running 3, waiting 1, completed 0, failed 60, total 64.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 0, failed 61, total 64.
Loading of 'SAPUSER1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 0, failed 62, total 64.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 0, failed 63, total 64.
ERROR 2009-10-27 10:53:37.125
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2009-10-27 10:53:37.140
FCO-00011 The step runMigrationMonitor with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
Thanks.

i checked the DOKCLU log, pls find the log below:
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20091027104307
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#20 $ SAP
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Aug 23 2009 23:42:38
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -k 1gage5M50Dp01eqte1]x3Qa5 -l DOKCLU.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(GSI) INFO: dbname   = "ATD                                                                                "
(GSI) INFO: vname    = "DB6                             "
(GSI) INFO: hostname = "UNKNOWN                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SERVER"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 23 Step 7)"
(DB) ERROR: DDL statement failed
( DROP TABLE "DOKCLU" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE TABLE "DOKCLU" ( "ID" SAPDB6CHAR(2) DEFAULT ' ' NOT NULL , "OBJECT" SAPDB6CHAR(60) DEFAULT ' ' NOT NULL , "LANGU" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "TYP" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "DOKVERSION" SAPDB6FIXCHAR(4) DEFAULT '0000' NOT NULL , "PAGENO" SMALLINT DEFAULT 0 NOT NULL , "TIMESTMP" SAPDB6CHAR(46) DEFAULT ' ' NOT NULL , "PAGELG" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(3800) FOR BIT DATA ) IN ATD#ES700D INDEX IN ATD#ES700I LONG IN ATD#ES700D )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ATD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20091027104307
Thanks

DB2 9.7 DFACT.SQL syntax error in Import ABAP phase - System Copy

Hi all. I'm trying a system copy with a source system SAP ECC 6.0 ehp4 based on NW 701 and db2 LUW 9.1 .
As it seems supported by SAP, i'm using db2 LUW 9.7 in target system.
O.S. is Windows 2008.
I got an error in phase "Import ABAP".
Sapinst.log says:
INFO 2010-02-18 10:12:14.337
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2010-02-18 10:12:14.509
Switched to user: devadm.
INFO 2010-02-18 10:12:14.572
Creating file C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\import_monitor.java.log.
INFO 2010-02-18 10:12:14.603
Switched to user: devadm.
INFO 2010-02-18 10:12:14.618
Working directory changed to C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP.
INFO 2010-02-18 10:12:14.618
Output of C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2010-02-18 10:12:44.790
Execution of the command "C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_24-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_24-rev-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_24-rev-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 73, failed 0, total 75.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 73, failed 1, total 75.
WARNING[E] 2010-02-18 10:12:44.790
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-02-18 10:12:44.790
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Looking into import_monitor.java.log i found that the problem is in dfact import.
I've looked into sapdfact.log and i found:
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100218105045
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Jan 28 2010 20:22:25
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname   = "DEV                                                                                "
(GSI) INFO: vname    = "DB6                             "
(GSI) INFO: hostname = "UNKNOWN                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SRVSAPDEV"
(GSI) INFO: release = "6.0"
(GSI) INFO: version = "6002 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 26 Step 5)"
(DB) ERROR: DDL statement failed with SQL error
( ALTER TABLE "/BI0/E0PPM_VC1" DROP PRIMARY KEY )
(SQL error -539)
error message returned by dsql:
SQL0539N Table or nickname "SAPDEV./BI0/E0PPM_VC1" does not have a "PRIMARY" key. SQLSTATE=42888
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB6) INFO: executing DDL statements for object /BI0/E0PPM_VC1 from external SQL file.
(DB) ERROR: DDL statement failed with SQL error
( CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"   ("KEY_0PPM_VC1T" ,   "KEY_0PPM_VC11" ,   "KEY_0PPM_VC1U" ,   "KEY_0PPM_VC1P" )   USING STOGROUP ___FAI PRIQTY 16   SECQTY 10240 FREEPAGE 0 PCTFREE 0   GBPCACHE CHANGED DEFINE NO   BUFFERPOOL BP3 COPY NO   PIECESIZE 2097152 K CLUSTER NOT PADDED )
(SQL error -7)
error message returned by dsql:
SQL0007N The character "_" following "" )   USING STOGROUP" is not valid. SQLSTATE=42601
(DB) INFO: disconnected from DB
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100218105045
So as you can see it seems that there's some syntax error in dfacl.log. The wrong SQL statement referred by sapdfact.log is
ind: /BI0/E0PPM_VC1~0
sql: CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"
("KEY_0PPM_VC1T" ,
"KEY_0PPM_VC11" ,
"KEY_0PPM_VC1U" ,
"KEY_0PPM_VC1P" )
USING STOGROUP ___FAI PRIQTY 16
SECQTY 10240 FREEPAGE 0 PCTFREE 0
GBPCACHE CHANGED DEFINE NO
BUFFERPOOL BP3 COPY NO
PIECESIZE 2097152 K CLUSTER NOT PADDED ;
|
ALTER TABLE "/BI0/E0PPM_VC1"
ADD PRIMARY KEY ("KEY_0PPM_VC1T",
"KEY_0PPM_VC11",
"KEY_0PPM_VC1U",
"KEY_0PPM_VC1P") ;
Am i missing something?
Data in referred tables (infocubes) isn't really important.
Is there a safe way to proceed?
Thanks in advance.
Regards
Simone Zaffalon

And this is the strange point: my source system is not a BI and my dataclasses .SQL files are not empty.
Me too i would expect that the files should be empty but instead they are full of object definitions.
For example i have APPL0.SQL that contains a list of all tables of ECC system, for example
tab: MAMT
sql:     CREATE TABLE "MAMT"
        ("MANDT" SAPDB6VARCHAR(000003)
        DEFAULT '000' NOT NULL,
        "MATNR" SAPDB6VARCHAR(000018)
        DEFAULT ' ' NOT NULL,
        "SPRAS" SAPDB6VARCHAR(000001)
        DEFAULT ' ' NOT NULL,
        "MEINH" SAPDB6VARCHAR(000003)
        DEFAULT ' ' NOT NULL,
        "MTXID" SAPDB6VARCHAR(000002)
        DEFAULT ' ' NOT NULL,
        "LFDNR" SAPDB6VARCHAR(000002)
        DEFAULT '00' NOT NULL,
        "MAKTM" SAPDB6VARCHAR(000040)
        DEFAULT ' ' NOT NULL)
        IN "&location&"
        INDEX IN "&locationI&"
        LONG IN "&locationL&"
      COMPRESS YES;
      ALTER TABLE "MAMT" LOCKSIZE ROW;
and like this for all others tables.
What would occur if i launch an import with such .SQL files?
(shuld i put this question to another thread or is fine for you to answer on this?)
Thank you again.
Simone Zaffalon

System copy --- Import issue in Import ABAP phase

HI Team, We are doing migration using system export/import method from win2008/SQL2008 to Win2012/SQL2012 . While doing export there was a problem with table SOFFCONT1 , So we have followed the note 1922094 and changed the size of the package from 1 GB to 2 GB in SOFFCONT1.cmd , After this We have exported the data from the source system using SWPM tool. Now we are importing in to Target system , During the Import ABAP phase we are facing the below issue for same table SOFFCONT1 . Could you please tell us how to fix this issue . Do we need to do same activity for the table while importing also ? =============================================================== H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 11608 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -ctf I \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DATA\SOFFCONT1.STR C:\Program Files\sapinst_instdir\BS2005\ERP60SR3 \LM\COPY\MSS\SYSTEM\CENTRAL\AS-ABAP\DDLMSS.TPL SOFFCONT1.TSK MSS -l SOFFCONT1.log H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job completed H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 10364 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -i SOFFCONT1.cmd -dbcodepage 4103 -l SOFFCONT1.log -loadprocedure fast (DB) INFO: connected to DB (GSI) INFO: dbname = "GFGH-SAP- " (GSI) INFO: vname = "MSSQL " (GSI) INFO: hostname = "GFGH-SAP- " (GSI) INFO: sysname = "Windows NT" (GSI) INFO: nodename = "GFGH-SAP-" (GSI) INFO: release = "6.3" (GSI) INFO: version = "9600 " (GSI) INFO: machine = "6x AMD64 Level 21 (Mod 2 Step 0)" (SQL) INFO: Searching for SQL file SQLFiles.LST (SQL) INFO: SQLFiles.LST not found (SQL) INFO: Searching for SQL file \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/SQLFiles.LST (SQL) INFO: \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/SQLFiles.LST not found (SQL) INFO: Searching for SQL file APPL1.SQL (SQL) INFO: APPL1.SQL not found (SQL) INFO: Searching for SQL file \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/MSS/APPL1.SQL (SQL) INFO: \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/MSS/APPL1.SQL not found (DB) INFO: SOFFCONT1 created (DB) INFO: SOFFCONT1~0 created Interface access functions from dynamic library dbmssslib.dll loaded. (IMP) INFO: ExeFastLoad failed with (IMP) ERROR: ExeFastload: rc = 2 (DB) INFO: disconnected from DB H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error (s) H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712163351 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712191514 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 8772 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -i SOFFCONT1.cmd -dbcodepage 4103 -l SOFFCONT1.log -loadprocedure fast (DB) INFO: connected to DB (GSI) INFO: dbname = "GFGH-SAP- " (GSI) INFO: vname = "MSSQL " (GSI) INFO: hostname = "GFGH-SAP- " (GSI) INFO: sysname = "Windows NT" (GSI) INFO: nodename = "GFGH-SAP-" (GSI) INFO: release = "6.3" (GSI) INFO: version = "9600 " (GSI) INFO: machine = "6x AMD64 Level 21 (Mod 2 Step 0)" (DB) INFO: SOFFCONT1 deleted/truncated Interface access functions from dynamic library dbmssslib.dll loaded. (IMP) INFO: ExeFastLoad failed with (IMP) ERROR: ExeFastload: rc = 2 (DB) INFO: disconnected from DB H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error (s) H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712193907 Thanks, Pavan 91-991 233 6633HI Team, We are doing migration using system export/import method from win2008/SQL2008 to Win2012/SQL2012 . We have exported the data from the source system using SWPM tool. Now we are importing in to Target system , During the Import ABAP phase we are facing the below issue. Could you please tell us how to fix this issue .If you need any other info please reach me out on 91- 991 233 6633 =============================================================== H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 11608 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -ctf I \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DATA\SOFFCONT1.STR C:\Program Files\sapinst_instdir\BS2005\ERP60SR3 \LM\COPY\MSS\SYSTEM\CENTRAL\AS-ABAP\DDLMSS.TPL SOFFCONT1.TSK MSS -l SOFFCONT1.log H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job completed H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 10364 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -i SOFFCONT1.cmd -dbcodepage 4103 -l SOFFCONT1.log -loadprocedure fast (DB) INFO: connected to DB (GSI) INFO: dbname = "GFGH-SAP- " (GSI) INFO: vname = "MSSQL " (GSI) INFO: hostname = "GFGH-SAP- " (GSI) INFO: sysname = "Windows NT" (GSI) INFO: nodename = "GFGH-SAP-" (GSI) INFO: release = "6.3" (GSI) INFO: version = "9600 " (GSI) INFO: machine = "6x AMD64 Level 21 (Mod 2 Step 0)" (SQL) INFO: Searching for SQL file SQLFiles.LST (SQL) INFO: SQLFiles.LST not found (SQL) INFO: Searching for SQL file \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/SQLFiles.LST (SQL) INFO: \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/SQLFiles.LST not found (SQL) INFO: Searching for SQL file APPL1.SQL (SQL) INFO: APPL1.SQL not found (SQL) INFO: Searching for SQL file \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/MSS/APPL1.SQL (SQL) INFO: \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/MSS/APPL1.SQL not found (DB) INFO: SOFFCONT1 created (DB) INFO: SOFFCONT1~0 created Interface access functions from dynamic library dbmssslib.dll loaded. (IMP) INFO: ExeFastLoad failed with (IMP) ERROR: ExeFastload: rc = 2 (DB) INFO: disconnected from DB H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error (s) H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712163351 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712191514 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 8772 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -i SOFFCONT1.cmd -dbcodepage 4103 -l SOFFCONT1.log -loadprocedure fast (DB) INFO: connected to DB (GSI) INFO: dbname = "GFGH-SAP- " (GSI) INFO: vname = "MSSQL " (GSI) INFO: hostname = "GFGH-SAP- " (GSI) INFO: sysname = "Windows NT" (GSI) INFO: nodename = "GFGH-SAP-" (GSI) INFO: release = "6.3" (GSI) INFO: version = "9600 " (GSI) INFO: machine = "6x AMD64 Level 21 (Mod 2 Step 0)" (DB) INFO: SOFFCONT1 deleted/truncated Interface access functions from dynamic library dbmssslib.dll loaded. (IMP) INFO: ExeFastLoad failed with (IMP) ERROR: ExeFastload: rc = 2 (DB) INFO: disconnected from DB H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error (s) H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712193907 Thanks, Pavan 91-991 233 6633

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost above discussion to get quick assistance.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Error during Heterogeneous System Copy - Phase 18 Import ABAP

Hello gurus,
I´m facing an error during the Target Installation in a Heterogeneous System Copy (Migration). The system SAP is a SAP ECC 6.0 SR3 (Unicode and Abap+Java).
Source server:
Operation System: Windows 2003 Server x64
Database: SQL Server 2008 SP01
Target server:
Operation System: Red Hat Enterprise Linux (RHEL) X64
Database: Oracle DB 10.2g (10.2.0.4)
I already did the all procedures in export database and all that looks fine!
At this point I´m running the system copy procedure through SAPInst on target server (RHEL / Oracle) but in phase 18 - Import ABAP the sapinst stops... (by the way in procedure bar, I can see "Import Monitor jobs: running 0, waiting 1, completed 0, failed 18, total 19")
I checked three log files (sapinst_dev.log ; sapinst.log ; SAPSDIC.log):
SAPSDIC.log:
/usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20100820145140
/usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/QAS/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jan 23 2008 17:39:05
/usr/sap/QAS/SYS/exe/run/R3load -ctf I /software/export_preparation/ABAP/DATA/SAPSDIC.STR /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS/DDLORA.TPL SAPSDIC.TSK ORA -l SAPSDIC.log
(TPL) ERROR: unknown template variable "compress"
/usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20100820145140

Hi Volker,
> (TPL) ERROR: unknown template variable "compress"
> This message looks like the DDLORA.TPL contains stuff that should not belong there.
> Can you attach the DDLORA.TPL.
> There are some bugs with SMIGR_CREATE_DDL, but they are mostly not related to oracle.
prikey: AFTER_LOAD ORDER_BY_PKEY
seckey: AFTER_LOAD
cretab: CREATE TABLE &tab_name&
        ( /{ &fld_name& &fld_desc& /-, /} )
        TABLESPACE &tablespace&
        &compress&
        &lob_cache&
        STORAGE (INITIAL     &init&
                 NEXT        &next&
                 MINEXTENTS &minext&
                 MAXEXTENTS &maxext&
                 PCTINCREASE &pctinc& )
drptab: DROP TABLE &tab_name&
crepky: CREATE UNIQUE INDEX &pri_key&
        ON &tab_name&
        ( &key_fld& /-, )
        TABLESPACE &tablespace&
        STORAGE (INITIAL     &init&
                 NEXT        &next&
                 MINEXTENTS &minext&
                 MAXEXTENTS &maxext&
                 PCTINCREASE &pctinc& )
                 NOLOGGING
                 COMPUTE STATISTICS ;
        ALTER INDEX &pri_key& LOGGING
drppky: DROP INDEX &pri_key&
creind: CREATE &unique& INDEX &ind_name&
        ON &tab_name&
        ( /{ &fld_name& /-, /} )
        TABLESPACE &tablespace&
        STORAGE (INITIAL     &init&
                 NEXT        &next&
                 MINEXTENTS &minext&
                 MAXEXTENTS &maxext&
                 PCTINCREASE &pctinc& )
                 NOLOGGING
                 COMPUTE STATISTICS ;
        ALTER INDEX &ind_name& LOGGING
drpind: DROP INDEX &ind_name&
crevie: CREATE VIEW &view_name&
        ( /{ &fld_name& /-, /} )
        AS &query&
drpvie: DROP VIEW &view_name&
trcdat: TRUNCATE TABLE &tab_name&
deldat: DELETE FROM &tab_name& &where&
negtab: LICHECK MLICHECK
negdat: LICHECK MLICHECK
negind: LICHECK0 MLICHECK0 LICHECK0 MLICHECK0
negvie:
negcpr:ARFCSSTATE ARFCSDATA ARFCRSTATE TRFCQDATA TRFCQIN TRFCQOUT TRFCQSTATE QRFCTRACE QRFCLOG
table storage parameters
loc: APPL0 PSAPSR3                 0000
     APPL1 PSAPSR3                 0000
     APPL2 PSAPSR3                 0000
     CLUST PSAPSR3                 0000
     DDIM PSAPSR3                 0000
     DFACT PSAPSR3                 0000
     DODS PSAPSR3                 0000
     POOL PSAPSR3                 0000
     SDIC PSAPSR3                 0
     SDOCU PSAPSR3                 0000
     SLDEF PSAPSR3700              0000
     SLEXC PSAPSR3700              0000
     SLOAD PSAPSR3                 0000
     SPROT PSAPSR3                 0000
     SSDEF PSAPSR3700              0000
     SSEXC PSAPSR3700              0000
     SSRC PSAPSR3                 0000
     TEMP PSAPSR3                 0000
     USER PSAPSR3USR              0000
     USER1 PSAPSR3USR              0000
sto: 0 0000000016K 0000000040K 0000000001 2147483645
     1 0000000016K 0000000160K 0000000001 2147483645
     10 0000000016K 0000655360K 0000000001 2147483645
     11 0000000016K 0001310720K 0000000001 2147483645
     12 0000000016K 0002621440K 0000000001 2147483645
     13 0000000016K 0005242880K 0000000001 2147483645
     14 0000000016K 0010485760K 0000000001 2147483645
     2 0000000016K 0000000640K 0000000001 2147483645
     3 0000000016K 0000002560K 0000000001 2147483645
     4 0000000016K 0000010240K 0000000001 2147483645
     5 0000000016K 0000020480K 0000000001 2147483645
     6 0000000016K 0000040960K 0000000001 2147483645
     7 0000000016K 0000081920K 0000000001 2147483645
     8 0000000016K 0000163840K 0000000001 2147483645
     9 0000000016K 0000327680K 0000000001 2147483645
index storage parameters
loc: APPL0 PSAPSR3                 0000
     APPL1 PSAPSR3                 0000
     APPL2 PSAPSR3                 0000
     CLUST PSAPSR3                 0000
     DDIM PSAPSR3                 0000
     DFACT PSAPSR3                 0000
     DODS PSAPSR3                 0000
     POOL PSAPSR3                 0000
     SDIC PSAPSR3                 0
     SDOCU PSAPSR3                 0000
     SLDEF PSAPSR3700              0000
     SLEXC PSAPSR3700              0000
     SLOAD PSAPSR3                 0000
     SPROT PSAPSR3                 0000
     SSDEF PSAPSR3700              0000
     SSEXC PSAPSR3700              0000
     SSRC PSAPSR3                 0000
     TEMP PSAPSR3                 0000
     USER PSAPSR3USR              0000
     USER1 PSAPSR3USR              0000
sto: 0 0000000016K 0000000040K 0000000001 2147483645
     1 0000000016K 0000000080K 0000000001 2147483645
     10 0000000016K 0000163840K 0000000001 2147483645
     11 0000000016K 0000327680K 0000000001 2147483645
     12 0000000016K 0000655360K 0000000001 2147483645
     13 0000000016K 0001310720K 0000000001 2147483645
     14 0000000016K 0002621440K 0000000001 2147483645
     2 0000000016K 0000000160K 0000000001 2147483645
     3 0000000016K 0000000640K 0000000001 2147483645
     4 0000000016K 0000002560K 0000000001 2147483645
     5 0000000016K 0000005120K 0000000001 2147483645
     6 0000000016K 0000010240K 0000000001 2147483645
     7 0000000016K 0000020480K 0000000001 2147483645
     8 0000000016K 0000040960K 0000000001 2147483645
     9 0000000016K 0000081920K 0000000001 2147483645

Unable to open the export file during Import ABAP phase on tar(System copy)

Hi Experts,
We are encountering the following error during Import ABAP phase on target system as we are performing system copy on target system as part of hardware migration(Data center migration).
Scenario:
Sourrce system - BI- ABAP(7.01), Win 2003 x64 unicode,Oracle 10.2.0.4
Target system - BI-ABAP(7.01), Win 2008 R2 unicode, Oracle 11.2.0.1
Actually on source system the data has been generated using migration monitor by using table splitting option and transferred on target system thru ftp option.
During Import process while selecting the Database installation type we have selected the installation method as "Standard systemcopy/Migration(load based)" and not checked the option "Start Migration montior Manually".
As far as my concern this error has nothing to do with this selection.please correct me If i am wrong.
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110428082000
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe -dbcodepage 4103 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(TFH) ERROR: Unable to open
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
(TFH) ERROR: OS error message: Invalid argument
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110428082003
Kindly revert with resolutions and suggestions and any hint to the oss notes as we haven't found anything specific to this error.
Regrds,
Dheeraj

\\10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
Please check if above said file located under specified path where SAPINST searvhing for it ie at
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA. if this file dont exist them it may be the case that your export is not proper.
Also check if user from which you have started this SAPINST is able to access
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA.
Thanks..
Mohit

Stuck at import ABAP

Similar Messages

Maybe you are looking for