Stuck at itune icon and cable!!!
My ipad is stuck while updated ios 6 from itunes.
it show itune icon and cable. not responce at all.w
hat should i do?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.
Similar Messages
-
My 5s iPhone is stuck on Itunes icon and a cable. I tried to do a restore but the iPhone isn't updated. All the labs that i send it to, couldn't fix it, what I can to? help! thanks.
Sounds like a 'stuck' Shift key. You could try to take the key off and put it back on yourself (should be some info on that from ifixit) or just take it to your local Apple Store and have them fix it.
Clinton -
Download of 8.2 ios on iPhone 5s caused phone to lock up
with iTunes icon and cable icon on screen .Will not reboot. How to fix?Hello jh901,
After reviewing your post, it sounds like you have not been able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
My ipad is showing itunes icone and cable but is stuck
My ipad is only showing the itunes icone and the cable on the display but is stuck completely
Something went wrong with your update; you are in Recovery Mode.
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad -
Ipad stuck at itunes symbol and cable
good morning everyone. i got a problem with my ipad. My problem begins when i update my ipad using itunes. In the middle of the process, the ipad is restarting. When it is restarting, my computer crashed. Then, my windows stuck at the windows screen. And then, i reformatted my OS and get the new windows, fresh. I installed the itunes, and when i connect it to my ipad, my ipad doesn'e show at the right top corner of the itunes, and there's itunes and cable picture shows in my ipad. can someone help me with this?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?
The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367 -
i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use
That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.
I am unable to use the phone now. What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.
slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide -
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug. is this corect? I am unable to use the phone now. What should i do next?
I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
Since receiving a iOS software update (6.1.2) my iPad has frozen and only the iTunes icon and a usb cable show on screen. I am unable to access any App. Can anyone help or point me in the right direction. this was raised with Apple and ticket number advised on 3rd March but not a word from Apple since.
Thank youTry and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen.
pls help me recognize my iphone4 to itunes and bring back my iphone 4 the way it was before. THANKS!Hi my iphone 4 is also having the same problem of hanging with the same screen reflected. itunes keep suggesting me to do a restore setting but it fails to restore after running half way. Have u solved your problem ardy..? Hw can i / we do about it...?
-
Iphone display stuck with the itunes icon and picture of usb drive
My iphone display is stuck with the itunes icon and picture of usb drive. I've tried resetting the phone but it comes back each time. When connected to PC nothing happens. When I open itunes the phone is not recognized.
see if this link helps http://support.apple.com/kb/HT1808
-
After doing the IOS 7.1.1 update on my iPad 4 the screen just shows the iTunes icon and a cable with an arrow. I can't get the device to open. Can someone help me with this issue? Thanks!!
Yes. The phone will be back to default settings.
Once the phone is up and running you can try and restore your backup again.
http://support.apple.com/kb/ht1414 -
I have an iphone 4s and there is a prompt that shows the itunes icon and a connection cable i plugged it in and itunes is saying im not connected to the internet but i am....any help out there???
If you are getting a message that iTunes is not connected to the Internet, try looking at this article: http://support.apple.com/kb/TS1490
Maybe you are looking for
-
How to store a PDF in a BLOB column, then select/search it using SQL?
We have a simple requirement. (1.) We have an Oracle 10g DB. (2.) We want to store PDFs/MS Word docs inside BLOB column in a table. (3.) We need to show PDF/MS Word content to the user, without opening the PDFs/MS World like we normally do (i.e. Usin
-
Please help me install Adobe Air. Nothing I've tried has worked.
Last week I joined the CC. I have successfuly installed "Edge Animate," "Edge Insspect" and "Photoshop." I tried to install Adobe Muse and have been unable to do so because I can't get "Air" to install. We're talking near a week of doing everything I
-
Choosing Unique Values Generically and add respective data in Standard Input
Hi, I want to send the unique data by generic checking and adding respective other data in case of Standard (X12) Input 850 Message. My Input : ISA*00* 00 *ZZ*THEM *ZZ*US 991221*1226*U*00401*000000025*0*T GS*PO*THEM*US*19991221*1226*1*X*004010 ST*850
-
Pleaee anyone know? Or can anyone at apple make this feature available like on amazon.com? Every time I visit the app store there are apps I want to download later but when I log back on I forget their name or what they where
-
Use the same code module for several steps in the sequence
Hello All, I have been trying to set up a sequence that uses the same code module for all of the steps in the sequence, but am having trouble referring back to it when I need to send it commands. I have gotten as far as calling the VI in a new thr