Stuck at iTunes+USB Connector Screen on iTouch... Please help!!
Today, Jan. 30th, I tried to download the most recent update for my 1st gen iTouch (2.2.1) and disconnected my iTouch during the process because the update was apparently not working because the iTunes+USB Connector screen was showing, so I tried to reconnect it. The iTunes+USB Connector screen remains frozen on there and it will not go away. I try plugging the iTouch into my computer (Windows) and both my computer and iTunes do not recognize it, or even show that it is connected. I have tried the whole hold down the Sleep/Off Button and Home button method but that does not work. Holding down the Sleep Button does not prompt me to slide it off, it just turns off by itself. I have tried plugging it into my wall-charger, still no luck. And I cannot restore it because iTunes does not pick it up. There are many people, such as myself, who have this same problem and every single response I have seen has said to restart/restore the iPod, and every single time the poster replies that that method failed. Someone.. please help!!
I am having the same problem, and so far it is very frustrating because the only almost viable solution I've found, letting the battery run down and then restoring, doesn't work because the ipod turns itself off after a little while instead of going into sleep mode and using up the battery over a couple days. If anyone has any other ideas, please let me know. I really would rather not have to send it into apple, but I can't think of any other way.
Similar Messages
-
My iPod is stuck on the USB connector towards the iTunes snd on cd, and I updated it and now it's saying my iPod has apasscode when it's still stuck on that USB screen... What do I do????
you can do is go to ijailbreak.com then select downloads section.......scroll down and see the latest version of ipod touch second generation is available for download.....when it gets downloaded connect your iPod to itunes or keep it connected then hold option and click restore (mac) search the software by writing in search "iPod" a thing with white cube will show up if it is the file you just downloaded click it and wait for itunes to do its work......you can ask more if you are on windows
-
Stuck at itunes/usb logo, help!!!
no longer an at&t customer but iphone asks for a sim card for the restoring process to be finished, so now im stuck at itunes/usb logo with a "no sim card installed" note, any help?
The iPhone 3G requires a SIM card in place when restoring. If what you want to do is use the phone as an iPod Touch, you need to insert the deactated SIM last used with the phone.
http://support.apple.com/kb/HT3406 -
My iPod shuffle will not turn on, nor is it recognized by the computer to pull up iTunes. I have order new USB cords and nothing. Please help! Not sure of the generation of iPod shuffle, I think 3rd.
first: why did you download the iOS Beta 8? If you are a developer, go to the Apple Developers website and check what they can do for your case.
second: setup an appointment to a Genius Bar for service. -
I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appearsHello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden -
After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS
Did you talk to your carrier?
-
I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
It works fine through my macbook, can't find anything in settings on iphone to resolve problemThe headset has to have A2DP capability, which most (I believe) do not.
http://en.wikipedia.org/wiki/Bluetooth_profile -
i tried to activate my iphone. i inserted the my sim card into the iphone and when i connect my iphone to my pc to activate it itunes did not recognize it. please help me.
are you sure thet the sim card is the sim card from the right service provider ? When and where did you bought it ?
-
hey all , my apple ipad 16gb wifi only is showing a blue screen !! please help ! how do i fix this . what does it mean ? thanks in advance .
Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.
-
I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord? Please help!!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
my iPhone 4S the restore Ends at 60 % with error 1 (not -1).
I reinstall iTunes, download iOS 7.0.1 as ipsw and No success
I Think that is a problem of the iTunes or firmware versions :/.
Apple Please Help us!You can't Restore to any iOS other than 7.1.
If the error persists, try on another computer. Still no joy, it is a hardware failure. -
i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me
While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did. Error 1015 occurs by attempting to restore a previously jailbroken phone.
It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
Terms of Use of this forum prohibit the discussion of jailbroken phones. You'll have to scour the internet for a solution to your problem, if indeed one exists. -
iwas updating my iphone 4 to ios 5,did NOT work.
now it is frozen with picture of phone lead,arrow and itunes icon.
phone will not connect to itunes for me to retore.
PLEASE HELP ANYONE !Have you tried putting the phone into recovery mode : http://support.apple.com/kb/HT1808 ?
-
Apple Application Suport was not found.
Apple Application Support is required to run itunesHelper.
Please uninstall itunes then install again.
Error2 Please help i did everything and still have the same problemWith the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Getting error 2349 installing itunes on vista 64-bit. Please help!
getting error 2349 installing itunes on vista 64-bit. Please help!
I've been having the same issue for the past few months. Try this http://support.apple.com/kb/HT1926
go through each step of the general installation troubleshooting completely then restart your computer and try to install it again. It worked for me on the first try so hopefully this helps!
Maybe you are looking for
-
NW 7.3: (A)SCS/SCS/ERS - use the same IP
Hi, evaluation tests with SAP NW 7.3 show that the instances of (A)SCS and ERS just using the same IP (in previous release ASCS and SCS have their own IP; depending on the releases ERS request an IP or not for installation procedure). In a single hos
-
What role does cache size play in external HD ?
Hello, I want to replace my existing 500 GB external HD with a larger one. I will want to have 2 partitions, one for Sample Libraries (additional to Logic from Logic ) and one for my daily Backup. I'm wondering what role the cache plays in a HD and w
-
What do you do when you forget the login password for your computer?
I just recently brought an iMac and forgot the login? how do I recover this without losing the infor I already loaded onto the computer??
-
Where is default & smartbar in forms stored? can we modify it?
Hi, We have Default & smartbar which is included in all the forms as deault menu & toolbar. where can i find it & how to customize it?if any one say where i can find, i can customize it. I found one menu / mmb file in orahome/cgenf61/admin the file n
-
Itunes Error 3259 for ipad update
My ipad 2 wants to upgrade the software but after downloading the full 607mb file it them says timed out with the error 3259. I will had to wait till next month now to download as have reached limit. Any suggestions would be gratefully accepted. Tha