Stuck at login screen after Lion install

I downloaded and installed Lion on my late 2008 mbp with the latest updated snow leopard and after the install, I'm stuck on a screen with icons of my users. If I click nothing happens. I tried repairing disk permissions as well as re-installing Lion but nothing has helped. Any ideas?

You might see if this works:
Clearing Caches to Fix Login Problem
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
/sbin/fsck -fy
Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
cd /System/Library/Caches
rm -r *
reboot
Press RETURN after each command.
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).

Similar Messages

  • Stuck at login screen after update froze

    Hi everyone, I have a Macbook that is a couple years old and have Leopard on it. Last night, I was prompted to install several updates and then restart my Macbook. I did so and then the updates began to install, but then appeared to stall. I hit the power off button and then turned my Macbook back on again. This brought me to the login screen, but I don't have my Macbook set to require me to login each time I use it. I entered my password and then it went to the blue screen like it was about to bring me to the desktop. But that didn't happen. It brought me back to the login screen, which is where I am still stuck as of this writing. Is there anything I can do? Thanks for your help.

    No guarantee this will solve your problem, but you can give it a try:
    You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
    Be careful. Some of these commands are dangerous, since you are going to be root.
    Start up in Single-User mode by holding down the command (Apple) key and the 's' key while you press the power switch. You can let go the keys when you see white text on a black background. When this has finished you will see a prompt ending in '#', although there may be other messages. Type
    /sbin/fsck -fy
    followed by a return, at the prompt and wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with
    /sbin/mount -uw /
    cd /Library/Preferences
    rm com.apple.loginwindow.plist
    rm com.apple.windowserver.plist
    cd /Library/Caches
    rm -r *
    cd /System/Library
    rm Extensions.kextcache
    cd /System/Library/Caches
    rm -r *
    reboot
    This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
    If you get error messages saying files do not exist, just ignore them and type reboot.
    If the above is unsuccessful then you may be able to reinstall OS X using an Archive and Install which does not erase the hard drive:
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Stuck at login screen after Yosemite Upgrade - 2013 27" imac won't recognize keyboard or mouse

    I installed yosemite without issues on my 2013 macbook pro retina so decided to try it on my 2013 27" imac. Install went fine until I get to login screen. Wireless keyboard and mouse won't pair so I can't type in password. Connected generic wired keyboard and mouse and still won't recognize it.
    However, when I restart it I can hold down option on keyboard and it will bring up list of hard drives to boot from (I also have windows installed with bootcamp) so I know imac pairs the key

    So the iMac was purchased by my father in 2011 shortly before he died.  I thought, why not check if he also purchased Applecare at the same time? Turns out he did! So after calling and trying to reset the SMC, etc. with it not working the Apple tech told me to turn it over to an authorized repair shop here in Louisiana.  Hopefully they can fix it.

  • Stuck at login screen after update 10.4 to 10.5 powerbook G4

    I installed Leopard successfully, but when i restarted my PB G4 it gets stuck at the login screen, it keeps giving me that rainbow colored waiting symbol, can't even turn it off without the power button...
    any help? thx !

    suburbya wrote:
    I installed Leopard successfully, but when i restarted my PB G4 it gets stuck at the login screen, it keeps giving me that rainbow colored waiting symbol, can't even turn it off without the power button...
    Welcome to Apple's discussion groups.
    Try booting with "safe mode" (http://support.apple.com/kb/HT1455) by holding down a "shift" key during the boot process. If that's successful, the problem is due to something within your account, possibly something that's incompatible with Leopard. Locating that thing could be an involved process. In the short run you might want to create a second user account and use that while you're repairing your main account.

  • MacBook Pro with retina display (2014) stuck on login screen after latest Yosemite update

    Yesterday I ran the latest Yosemite update. The MacBook restarted afterwards, but the login screen won't respond to trackpad or keyboard. The MacBook is fully charged, BTW. I've shut down by holding the power key until it powers off, let it rest, and powered up again. I get the chime and the login screen, but I can't select anything either with trackpad or keyboard.
    OH

    Sorry folks, this is me again.
    NEVER MIND. I closed the lid, opened it, and all is well. I don't know what was going on, but it seems to have resolved itself.

  • Stuck on blue screen after re-installing OS X Panther

    Ok, iTunes installation was getting stuck at 53%. So ran the Check Disk Utility from the OS X Panther CD. I got the message...
    So then I decided to do a clean install of OS X Panther. I thought all was going well until now. My ibook is stuck on this blue screen with a rotating colorwheel mouse cursor. It eventually turns into an arrow but then goes back to a colorwheel...
    So now what? Is buying another program like DiskWarrior my only option? Keep in mind that the hard drive was replaced the last week I had Apple Care Protection. And the 90 warranty on the replacement hard drive is over.
    Here are the details of my iBook...
    M8602LL/A
    http://support.apple.com/specs/ibook/iBook16VRAM.html
    Thank you
    M8602LL/A   Mac OS X (10.3.9)   640MB RAM

    Well, I did the pram thing. That just brought me to a gray screen with the gray apple. And that's it. What I did notice about the info on the blue screen was that it was checking for fonts. So this time, I re-installed with all of the font options checked. Waste of space, but whatever.
    Installation completed. I even got to the repetitive registration form. (hmmm, let's see, my ibook has been registered about 20 times.)
    After I get to the desktop, well, that's it. I click on software update and it bounces and then stops. I get into the System Prefs and click Software Updates and apparently my copy of Panther is up to date. Ya right.
    So then I click Safari in the Launcher. nothing
    So then I go into my hard drive/application to get to Safari. and um, nothing. Well, actually I get an endless spinning scroll wheel.
    So I try the PRAM thing again. And now I am stuck at a grey screen with a grey apple!!!!!!!!!!!!!!
    I am ready to break this thing in half like I did to a cell phone once.

  • MBP stuck on Grey Screen after Mavericks Install

    I have a MBP 5,5 and every time I try installing Mavericks my computer restarts and after the grey spinning wheel my screen flashes black and then stops at a grey screen. I have tried running in Verbose mode and I notice it said I have a SMC error and that it tries to use an old SMC. If I try installing mavericks to an external drive everything is fine. Could it be something configured in one of my programs?
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,5
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.26 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP55.00AC.B03
      SMC Version (system):          1.47f2

    I have already restored my laptop to the state before installing Mavericks. I am attaching the EtreCheck that I ran while running 10.8.5 I won't be able to try to install Mavericks until the weekend as I use the laptop for school and work.
    Hardware Information:
              MacBook Pro (13-inch, Mid 2009)
              MacBook Pro - model: MacBookPro5,5
              1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
    System Software:
              OS X 10.8.5 (12F45) - Uptime: 0 days 22:12:2
    Disk Information:
              WDC WD7500BPKT-22PK4T0 disk0 : (750.16 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 749.3 GB (174.02 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC  DVD RW AD-5960S 
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. Built-in iSight
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Fitbit Inc. Fitbit Base Station
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
    Configuration files:
              /etc/hosts - Count: 20
    Kernel Extensions:
              com.avatron.AVExVideo          (1.7 - SDK 10.8)
              com.Cycling74.driver.Soundflower          (1.5.2)
              com.hzsystems.terminus.driver          (4)
              com.avatron.AVExFramebuffer          (1.7 - SDK 10.8)
              com.paceap.kext.pacesupport.snowleopard          (5.9 - SDK 10.6)
    Startup Items:
              ChmodBPF: Path: /Library/StartupItems/ChmodBPF
              HP IO: Path: /Library/StartupItems/HP IO
              M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
              M-Audio Firmware Loader: Path: /Library/StartupItems/M-Audio Firmware Loader
              MAudioMobilePreUSB: Path: /Library/StartupItems/MAudioMobilePreUSB
              rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.adobe.SwitchBoard.plist 3rd-Party support link
              [System] com.barebones.textwrangler.plist 3rd-Party support link
              [System] com.bombich.ccc.plist 3rd-Party support link
              [System] com.fernlightning.fseventer.plist 3rd-Party support link
              [System] com.fitbit.galileod.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.m-audio.firewire.helper.plist 3rd-Party support link
              [System] com.m-audio.usb.firmwareloader.plist 3rd-Party support link
              [System] com.megacloud.helper.plist 3rd-Party support link
              [System] com.micromat.TechToolProDaemon.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
              [System] com.paceap.eden.licensed.plist 3rd-Party support link
              [System] com.skype.skypeinstaller.plist 3rd-Party support link
              [System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
              [System] PACESupport.plist 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.gopro.stereomodestatus.plist 3rd-Party support link
              [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
              [System] com.micromat.TechToolProAgent.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.wacom.pentablet.plist 3rd-Party support link
              [System] org.macosforge.xquartz.startx.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.google.GoogleContactSyncAgent.plist 3rd-Party support link
              [not loaded] com.redgiantsoftware.updater.plist 3rd-Party support link
              [not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
    User Login Items:
              smcFanControl
              Dropbox
              NIHardwareAgent
              Fitbit Connect Menubar Helper
              DJM-900nexus AutoLauncher
              ProFire Agent
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              WacomNetscape: Version: 1.1.1-1 3rd-Party support link
              Unity Web Player: Version: UnityPlayer version 3.3.0f4 3rd-Party support link
              AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
              Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
              iLokClientHelper: Version: 3.6 - SDK 10.5 3rd-Party support link
              AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
              WacomTabletPlugin: Version: WacomTabletPlugin 2.0.0.4 3rd-Party support link
              Flash Player: Version: 12.0.0.77 - SDK 10.6 Outdated! Update
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              QuickTime Plugin: Version: 7.7.1
              googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              AdobePDFViewer: Version: 10.1.9 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              iGetter Extension: Version: 2.9.2
    Audio Plug-ins:
              AirPlay: Version: 1.7 - SDK 10.8
              iSightAudio: Version: 7.7.1 - SDK 10.8
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
    User iTunes Plug-ins:
              SoundThing: Version: (null) 3rd-Party support link
              TrapcodeKlangfarbe_BETA5: Version: (null) 3rd-Party support link
    User Internet Plug-ins:
              BlueStacks Install Detector: Version: 0.2.5 - SDK 10.6 3rd-Party support link
              iGetterScriptablePlugin: Version: 2.9.2 3rd-Party support link
              WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
    3rd Party Preference Panes:
              PenTablet  3rd-Party support link
              Cineform  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Java  3rd-Party support link
              PreferencesPane  3rd-Party support link
              MAudioMobilePreUSB  3rd-Party support link
              PreferencesPane  3rd-Party support link
              Perian  3rd-Party support link
              TechTool Protection  3rd-Party support link
    Old Applications:
              InterLok Helper:          Version: 5.9 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/PACE Anti-Piracy/InterLok Helper.app
              Uninstall Pro Tools:          Version: 10.0 - SDK 10.4 3rd-Party support link
                        /Applications/Avid/Pro Tools/Pro Tools Utilities/Uninstall Pro Tools.app
              Data Rescue 3:          Version: 3.2.1 - SDK 10.4 3rd-Party support link
              Angry Birds Rio:          Version: 1.0.0 - SDK 10.0 3rd-Party support link
              Audacity:          Version: 1.3.13.0 - SDK 10.4 3rd-Party support link
    Time Machine:
              Skip System Files: NO
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 697.84 GB Disk used: 535.77 GB
              Destinations:
                        Time Machine [Network] (Last used)
                        Total size: 2 
                        Total number of backups: 67
                        Oldest backup: 2013-04-27 22:06:51 +0000
                        Last backup: 2014-04-06 18:29:25 +0000
                        Size of backup disk: Adequate
                                  Backup size 2  > (Disk used 535.77 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   5%          WindowServer
                   2%          EtreCheck
                   1%          Dropbox
                   1%          Google Chrome
                   1%          coreservicesd
    Top Processes by Memory:
              233 MB          WebProcess
              176 MB          mds
              127 MB          Mail
              123 MB          Google Chrome
              90 MB          iTunes
    Virtual Memory Information:
              236 MB          Free RAM
              1.58 GB          Active RAM
              1.23 GB          Inactive RAM
              723 MB          Wired RAM
              10.80 GB          Page-ins
              1.69 GB          Page-outs

  • MacBook Stuck at Grey Screen - After Leopard Install!?!?!

    I've had a MacBook for about 2 years now, everything is up to date blah blah...So I finally decided to make the jump to Leopard, now after installing the update OS, it restarted and the Macbook won't boot past the Apple logo with spinning dial and grey background?? What do I do??

    This is horrible...I have papers due tomorrow and I'm out of a computer...The book says NOTHING about taking off software before updating...I can't even boot up my computer...Secondly I have no time capsule, even if I had any idea to format...and all my music is on the computer...
    Nice Leopard experience here!
    Message was edited by: Rav8e

  • Brand New MacBook Pro stuck on startup screen after Lion os X update

    I literally got it an hour ago and when it was updating it got stuck on the startup screen. I've tried turning it off and on but it still wont load. Help

    I'm not going to read that huge rambling post, sorry.
    But you can look through my user tips here
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

  • Lion Stuck at login screen,can't type password

    My OSX Lion stuck at login screen,when I type password it just "beep" and I can only type few words.I just had those problem before..But since the battery ran out,and I gonna login...then I can't type the password...please help me....
    P.S. My keyboard and trackpad is not working before,my keyboard can't type and my trackpadcan only do right click..

    What year and model of MacBook Pro do you have?  I'm wondering if the factory installed battery is failing due to age or use.  A MacBook Pro battery can be recharged about 300 times before it becomes unuseable.  Is this possibly the problem?
    Hope this helps

  • After typing login password at login screen osx lion attempts to login then returns to login screen

    after typing login password at login screen osx lion attempts to login then returns to login screen, any ideas?

    While we all have MacBooks in this forum most of us don’t run Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • Bypass login screen in Lion OS X?

    Is there any way to bypass the login screen in Lion OS X? I find it a cumbersome extra step becuase if I log in with my password, the Wi Fi does not connect so I have to restart. Alternatively if I just press the restart button on the login page, the system restarts without the need of a password (which seems totally contradictory....why ask for a password when on the same login screen you can get into the system without it) and the Wi Fi connection is good.
    In any case, it's a waste of time to have to restart every time I boot up my iMac.

    Its there for me...
    Try resetting your PRAM and SMC to see if the IR receiver shows up after doing this.
    Do you see the "IR Receiver" in the "USB" section of the "System Information" utility (previously "System Profiler")?

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • My MacBook Pro is running very hot after lion install.  Are there any hardware changes that will help? What can I do to get it back to normal?

    My MacBook Pro is running very hot after lion install.  Are there any hardware changes that will help? What can I do to get it back to normal?

    I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
    In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
    Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

  • Tie Machine  no longer backs up after lion install

    After Lion install, Time Machine no longer backs up-will start to back up but freezes after a few kb's-spinning clock will spin 24/7 but backup is stalled

    See the green box in #D2 in Time Machine - Troubleshooting.

Maybe you are looking for

  • Adobe media encoder error message - please help

    I purchased adobe creative suite 4 web standard in january of 2010.  I'm in the process of learning how to use all the features.  I am building a website in dreamweaver and wanted to create and import a flash movie.  I opened adobe media encoder from

  • Understanding and applying color depth options in PS CS5

    I was reviewing a very helpful tutorial about bit depth. (Here's the link, in case anyone is interested: http://www.cambridgeincolour.com/tutorials/bit-depth.htm). I'd like to get a better handle on how PS CS5's choices (Image>Mode>8,16 or 32) actual

  • If condition exit program

    i want the user to input two dates, start and end date, in the format (MM/DD/YYYY) how can i add validation so that if end date < start date then exit program here's a sample set verify off accept start prompt 'Enter start time' accept end prompt 'En

  • Function control of the PXI system

    Hi All! We order  NI PXI-1036DC + PXI-4462 + PXI-6682 GPS + PXI-6653 + PXI-8101. Is it possible to control: 1. DC voltage and current? 2. GPS coordinates of the system? 3. Accuracy (or quality) of the 10 MHz clock disciplining by the 6682 GPS? It m

  • Noise on speaker but not on headphone

    Lately my 4 months old 1.83 MHz Mini has some noise coming from the speaker, the level remains the same with Volume off or at highest setting. There is no noise at all when listening to the headphone-out. I did a complete reinstall of OS X, but that