Stuck at login screen after Yosemite Upgrade - 2013 27" imac won't recognize keyboard or mouse

I installed yosemite without issues on my 2013 macbook pro retina so decided to try it on my 2013 27" imac. Install went fine until I get to login screen. Wireless keyboard and mouse won't pair so I can't type in password. Connected generic wired keyboard and mouse and still won't recognize it.
However, when I restart it I can hold down option on keyboard and it will bring up list of hard drives to boot from (I also have windows installed with bootcamp) so I know imac pairs the key

So the iMac was purchased by my father in 2011 shortly before he died. I thought, why not check if he also purchased Applecare at the same time? Turns out he did! So after calling and trying to reset the SMC, etc. with it not working the Apple tech told me to turn it over to an authorized repair shop here in Louisiana. Hopefully they can fix it.

Similar Messages

MacBook Pro stuck at grey screen after Yosemite upgrade

upgraded to yosemite yesterday. Reboot and stuck at grey screen(login in page) when i log in there is some codes thing at the left top corner of the screen. and then it reboots again. Which means I can never log onto the computer. what should I do

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

Stuck at login screen after Lion install

I downloaded and installed Lion on my late 2008 mbp with the latest updated snow leopard and after the install, I'm stuck on a screen with icons of my users. If I click nothing happens. I tried repairing disk permissions as well as re-installing Lion but nothing has helped. Any ideas?

You might see if this works:
Clearing Caches to Fix Login Problem
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
/sbin/fsck -fy
Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
cd /System/Library/Caches
rm -r *
reboot
Press RETURN after each command.
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).

Stuck at login screen after update froze

Hi everyone, I have a Macbook that is a couple years old and have Leopard on it. Last night, I was prompted to install several updates and then restart my Macbook. I did so and then the updates began to install, but then appeared to stall. I hit the power off button and then turned my Macbook back on again. This brought me to the login screen, but I don't have my Macbook set to require me to login each time I use it. I entered my password and then it went to the blue screen like it was about to bring me to the desktop. But that didn't happen. It brought me back to the login screen, which is where I am still stuck as of this writing. Is there anything I can do? Thanks for your help.

No guarantee this will solve your problem, but you can give it a try:
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-User mode by holding down the command (Apple) key and the 's' key while you press the power switch. You can let go the keys when you see white text on a black background. When this has finished you will see a prompt ending in '#', although there may be other messages. Type
/sbin/fsck -fy
followed by a return, at the prompt and wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
rm Extensions.kextcache
cd /System/Library/Caches
rm -r *
reboot
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
If you get error messages saying files do not exist, just ignore them and type reboot.
If the above is unsuccessful then you may be able to reinstall OS X using an Archive and Install which does not erase the hard drive:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

MacBook Pro with retina display (2014) stuck on login screen after latest Yosemite update

Yesterday I ran the latest Yosemite update. The MacBook restarted afterwards, but the login screen won't respond to trackpad or keyboard. The MacBook is fully charged, BTW. I've shut down by holding the power key until it powers off, let it rest, and powered up again. I get the chime and the login screen, but I can't select anything either with trackpad or keyboard.
OH

Sorry folks, this is me again.
NEVER MIND. I closed the lid, opened it, and all is well. I don't know what was going on, but it seems to have resolved itself.

User account not showing up in login screen after Leopard upgrade

One of my admin accounts is no longer showing up at log in. I did the upgrade and password suggestions on the support sight... titled Unable to log in to account after an upgrade but still no good. The only account affected did have a password of 8 characters or more.
I go to open System Preferences when in a different account with admin rights and I don't see my original account as an existing user? I can see my original stuff in the user folders, but I am not listed as a user in the Account Preferences or Login. I also cannot create a new user with the same name as my old login as that name is apparently(!) already in use. I have an account with admin rights that is showing up.
From a different thread it seems that many others are having this problem thus I think it warrents its own thread. What is the easiest way to bring back my account and data... I know it is there it just is not showing up at log in.
tbigsmo wrote this from other thread... hmmmm
One more thing, I created a new user and copied over all folders from my old user account and that didn't even think about working. The last solution was suggested by the apple 800 number. This is what I was going to try next, but now am waiting. Also the other thread was very hard to follow as many folks did not have access to a working user admin account.
How can I find myself too?

Turns out you're both right, sort of...
* The Guest Account is hidden because it's a sub 500 user, so you guys were on the money there. (I hadn't realized it was a sub-500 user...)
* Using the hint at the link posted by V.K. to hide the secret administrator hides it ONLY from the login window, but not from the Accounts section of System Preferences...so, that solution doesn't work for me. (This is going on a master image, and the users will have admin rights, so they would be able to delete the secret administrator account...)
So, I'll just have to live without having the actual Guest account active (which I need active for use with Orbicule Undercover,) and instead I created a standard user (with a few parental controls) named "Guest User."
Thanks, both of you, for your help.

Stuck at login screen after update 10.4 to 10.5 powerbook G4

I installed Leopard successfully, but when i restarted my PB G4 it gets stuck at the login screen, it keeps giving me that rainbow colored waiting symbol, can't even turn it off without the power button...
any help? thx !

suburbya wrote:
I installed Leopard successfully, but when i restarted my PB G4 it gets stuck at the login screen, it keeps giving me that rainbow colored waiting symbol, can't even turn it off without the power button...
Welcome to Apple's discussion groups.
Try booting with "safe mode" (http://support.apple.com/kb/HT1455) by holding down a "shift" key during the boot process. If that's successful, the problem is due to something within your account, possibly something that's incompatible with Leopard. Locating that thing could be an involved process. In the short run you might want to create a second user account and use that while you're repairing your main account.

Stuck on Bios screen after GPU upgrade

Hello,
I own a HP Pavilion HPE h8-1024ch (http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&os=4132&product=5144367). I've replaced the GTX 550 ti with a Gigabyte GTX 760 (http://www.gigabyte.com/products/product-page.aspx?pid=4935) and when I power on the computer, the screen get stuck on the bios.
Is there a new bios update for my computer or how can I fix it?
The problem don't come from the power supply, I changed it for a Corsaire 850Watts.
(sorry for my english, I speak french)
Thank you in advance for your answers.

Hi,
Most if not all NVIDIA GTX 760 graphics cards will not work in your PC. Return the graphics card and try the NVIDIA GTX 660.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Mac Mini (Mid-2011 Core i7) Slow after Yosemite Upgrade

I've searched the other "slow after Yosemite upgrade" threads but those seem to relate to Core Duo 2 machines with less RAM. I have a Core i7 MM w/ 8GB of RAM, after the Yosemite upgrade it constantly lags, I can barely type on it these days because the text lags so badly. It's unusable to say the least. Is there anything I can do to speed it up? There must be a reason why the performance is so bad.
Problem description:
Slow after Yosemite upgrade.
EtreCheck version: 2.1.8 (121)
Report generated 1 March 2015 8:48:15 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Mid 2011) (Technical Specifications)
    Mac mini - model: Macmini5,2
    1 2.7 GHz Intel Core i7 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 6630M - VRAM: 256 MB
        Thunderbolt Display 2560 x 1440
        DX80 spdisplays_1080p
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 12:20:13
Disk Information: ℹ️
    Hitachi HTS727575A9E362 disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 748.96 GB (551.28 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 749.30 GB Online
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. iPad
    Apple Inc. Apple Thunderbolt Display
    Apple Inc. FaceTime HD Camera (Display)
    Apple Inc. Display Audio
Firewire Information: ℹ️
    BUFFALO INC. HDD 800mbit - 800mbit max
        EFI (disk2s1) <not mounted> : 210 MB
        ext2tb (disk2s2) /Volumes/ext2tb : 2.00 TB (686.75 GB free)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
        Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
        /System/Library/Extensions
    [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
    [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
Launch Agents: ℹ️
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.sophos.uiserver.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
    [loaded]    org.gpgtools.Libmacgpg.xpc.plist [Click for support]
    [loaded]    org.gpgtools.macgpg2.fix.plist [Click for support]
    [running]    org.gpgtools.macgpg2.gpg-agent.plist [Click for support]
    [loaded]    org.gpgtools.macgpg2.updater.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.fitbit.galileod.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [running]    com.sophos.common.servicemanager.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [running]    com.google.Chrome.framework.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    Google Drive    Application (/Applications/Google Drive.app)
    Dropbox    Application (/Applications/Dropbox.app)
    SpiderOak    Application (/Applications/SpiderOak.app)
    AirServer    Application Hidden (/Applications/AirServer.app)
    Plex Media Server    Application (/Applications/Plex Media Server.app)
    Box Sync    Application (/Applications/Box Sync.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.235 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 7 Update 21 Check version
User internet Plug-ins: ℹ️
    WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    1Password
    AdBlock
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    GPGPreferences [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 748.96 GB Disk used: 197.68 GB
    Destinations:
        ext2tb [Local]
        Total size: 2.00 TB
        Total number of backups: 38
        Oldest backup: 2012-10-07 09:09:10 +0000
        Last backup: 2015-03-01 09:07:46 +0000
        Size of backup disk: Adequate
            Backup size 2.00 TB > (Disk used 197.68 GB X 3)
Top Processes by CPU: ℹ️
        40%    WindowServer
        12%    firefox
         2%    Activity Monitor
         1%    Box Sync Monitor
         1%    sysmond
Top Processes by Memory: ℹ️
    533 MB    mds_stores
    498 MB    firefox
    429 MB    softwareupdated
    172 MB    InterCheck
    155 MB    SpiderOak
Virtual Memory Information: ℹ️
    8.58 GB    Free RAM
    4.31 GB    Active RAM
    2.49 GB    Inactive RAM
    1.79 GB    Wired RAM
    10.08 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 1, 2015, 08:38:46 PM    /Library/Logs/DiagnosticReports/SpiderOak_2015-03-01-203846_[redacted].cpu_reso urce.diag [Click for details]
    Mar 1, 2015, 08:30:37 PM    /Library/Logs/DiagnosticReports/WindowServer_2015-03-01-203037_[redacted].cpu_r esource.diag [Click for details]
    Mar 1, 2015, 04:42:31 PM    /Library/Logs/DiagnosticReports/firefox_2015-03-01-164231_[redacted].cpu_resour ce.diag [Click for details]
    Mar 1, 2015, 08:26:20 AM    Self test - passed

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Can't sign in on external monitor with MBP after Yosemite upgrade

After Yosemite upgrade, when I turn on my MBP, I can't sign in using external monitor with MBP, always could before Yosemite. Blurred image of my wallpaper shows on monitor, can move arrow on external screen but sign-in only shows up on my computer screen, with no arrow. Since there is no arrow on the computer screen, and no sign in box on the external monitor, I have to unplug the external video to sign in on the computer, then plug in the monitor again. Any ideas?

NOWEK,
Thanks for this suggestion, but so far no joy. I have zapped the PRAM, jammed the Frabitz and smashed the Gafrogsnicker, all to no avail. When the MBP restarts I get a blurred image (extreme "vibrancy") on the external monitor, but no images of the login accounts to choose from or the other options. However, on the MBP screen I get all that. The keyboard and mouse respond, but just doesn't display on the external monitor. This is of interest to me because I have the MBP down in a credenza with other related gear and the external monitor and keyboard up on my desk. It's true I don't have to do this often, but still, it just started this aggravation with Yosemite. Thanks for trying to help.

Battery drain after yosemite upgrade

Can somebody solve my issue of battery drain after installing yosemite on my mac book air? battery used to last twice longer on the older OS

have done a entre check as below
Problem description:
Battery drain after Yosemite upgrade on mac book air 11”
EtreCheck version: 2.0.11 (98)
Report generated 24 November 2014 5:36:32 pm IST
Hardware Information: ℹ️
MacBook Air (11-inch, Mid 2013) (Verified)
MacBook Air - model: MacBookAir6,1
1 1.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1366 x 768
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:56:56
Disk Information: ℹ️
APPLE SSD TS0128F disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 120.47 GB (78.59 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
MobileBrServ: Path: /Library/StartupItems/MobileBrServ
StartOuc: Path: /Library/StartupItems/StartOuc
Startup items are obsolete and will not work in future versions of OS X
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      4% WindowServer
      1% fontd
      0% sysmond
      0% AppleSpell
      0% notifyd
Top Processes by Memory: ℹ️
168 MB com.apple.WebKit.WebContent
168 MB Mail
137 MB softwareupdated
73 MB Safari
64 MB mds_stores
Virtual Memory Information: ℹ️
440 MB Free RAM
1.78 GB Active RAM
1.47 GB Inactive RAM
608 MB Wired RAM
1.07 GB Page-ins
213 KB Page-outs

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Late 2012 Mac Mini slow after Yosemite upgrade

First time on forums - hope Im not asking a questions that has been asked several times before. I purchased a mac mini not even a year ago, and its was plenty fast until I updated to Yosemite. I also found a link to Etresoft from another questions and ran it. For the sake of expediency - Ill go ahead and post the results. Any thoughts? - all help is more appreciated than I can express in words..
Problem description:
Mac running very slow after Yosemite upgrade
EtreCheck version: 2.1.8 (121)
Report generated February 8, 2015 at 7:30:25 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Late 2012) (Technical Specifications)
    Mac mini - model: Macmini6,1
    1 2.5 GHz Intel Core i5 CPU: 2-core
    12 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1067 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 4000
        SMS19A450 1440 x 900 @ 60 Hz
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: one day 23:7:9
Disk Information: ℹ️
    APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (240.73 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    VIA Labs, Inc. USB3.0 Hub
        Western Digital My Book 1230 4 TB
        EFI (disk4s1) <not mounted> : 315 MB
        Time Machine (disk4s2) /Volumes/Time Machine : 4.00 TB (2.80 TB free)
        VIA Labs, Inc. USB3.0 Hub
             hub_device
    Western Digital My Passport 0741 2 TB
        EFI (disk2s1) <not mounted> : 210 MB
        2 T - Passport Drive - User Data (disk2s2) /Volumes/2 T - Passport Drive - User Data : 2.00 TB (1.47 TB free)
    VIA Labs, Inc. USB2.0 Hub
        VIA Labs, Inc. USB2.0 Hub
             hub_device
                Apple, Inc. Keyboard Hub
                    Logitech Optical USB Mouse
                    Apple Inc. Apple Keyboard
        MediaTek Inc MT1887 507.9 MB
        disk5s1 (disk5s1) <not mounted> : 32 KB
        JayHoferEDIT2014 (disk5s2) /Volumes/JayHoferEDIT2014 : 502 MB (0 B free)
    Apple, Inc. IR Receiver
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
    Seagate FreeAgent FW 800mbit - 800mbit max
        EFI (disk3s1) <not mounted> : 210 MB
        2 T - Fire Drive (disk3s2) /Volumes/2 T - Fire Drive : 2.00 TB (1.61 TB free)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Applications/Magican.app
    [not loaded]    com.magican.iokit.filemon (1 - SDK 10.7) [Click for support]
    [not loaded]    com.magican.iokit.netmon (1 - SDK 10.7) [Click for support]
        /Library/Application Support/MacKeeper/AntiVirus.app
    [not loaded]    net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
    [loaded]    net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
        /Library/Extensions
    [loaded]    com.karios.driver.DuetDisplay (1 - SDK 10.10) [Click for support]
        /System/Library/Extensions
    [loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.security.cloudkeychainproxy.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.xpc.loginitemregisterd.plist
    5 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    com.apple.xpc.smd.plist
    4 processes killed due to memory pressure
Launch Agents: ℹ️
    [running]    com.brother.LOGINserver.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.backblaze.bzserv.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [running]    com.magican.castle.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
    [running]    net.kromtech.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [running]    com.amazon.music.plist [Click for support]
    [running]    com.backblaze.bzbmenu.plist [Click for support]
    [running]    net.kromtech.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
    duet    Application (/Applications/Duet.app)
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Google Drive    Application (/Applications/Google Drive.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Google Chrome    Application (/Applications/Google Chrome.app)
    Box Sync    UNKNOWN (missing value)
    Knock    Application (/Applications/Knock.app)
    MagicanMonitor    Application (/Applications/Magican.app/Contents/Frameworks/MagicanMonitor.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.06 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
    Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
3rd Party Preference Panes: ℹ️
    Backblaze Backup [Click for support]
    Flash Player [Click for support]
    Growl [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 499.25 GB Disk used: 258.52 GB
        2 T - Passport Drive - User Data: Disk size: 2.00 TB Disk used: 532.92 GB
    Destinations:
        My Book [Local]
        Total size: 4.00 TB
        Total number of backups: 69
        Oldest backup: 2014-05-28 08:55:42 +0000
        Last backup: 2015-02-09 03:04:24 +0000
        Size of backup disk: Adequate
            Backup size 4.00 TB > (Disk used 791.44 GB X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         4%    MailTab Pro for Gmail
         3%    Google Chrome
         2%    MagicanMonitor
         1%    bztransmit
Top Processes by Memory: ℹ️
    490 MB    MailTab Pro for Gmail
    412 MB    softwareupdated
    283 MB    AntiVirus
    271 MB    Google Chrome Helper EH
    232 MB    Google Chrome
Virtual Memory Information: ℹ️
    2.53 GB    Free RAM
    6.05 GB    Active RAM
    1.39 GB    Inactive RAM
    1.70 GB    Wired RAM
    91.14 GB    Page-ins
    154 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 8, 2015, 08:27:16 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-08-082716_[reda cted].crash
    Feb 6, 2015, 08:20:10 PM    Self test - passed
    Feb 6, 2015, 07:49:11 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/DashlaneAgent_2015-02-06-19491 1_[redacted].crash

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1217 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\\.apple\\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n   ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n   '"${k[22]}"'mod date: %s\n   '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.daemon{,} com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} com.teamviewer.{Helper,teamviewer{,_desktop,_service}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~"uts"&&$2>'${p[19]}') { print $1" "int($2);} ' '|grep DYLD' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp]|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n   "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n   "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n   "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n   "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="ms/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n   '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[18]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[17]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+:../d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(complet|enabl)ed|ry HD' -k Message CReq 'bad |corru|dead|fail|GPU |hfs: Ru|inval|v_c|NVDA\(|pagin|error|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "sandbox ex" ' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 62 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 13 42 70 101 25;D12 65 6 36 13;D12 45 20 52 66;D13 66 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15;B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 63 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84;D13 61 5 54 75 70;D13 14 5 14 12;D13 15 5 72 12;C4;};D13 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 6 6 73 102;B2&&{ A1 18 26 94;B7 6;B4 0 0 11;C3 23;};A1 18 26 94;B7 6;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 5;A2 14 61;B4 0 6 21;B4 5 0;A2 14 62;B4 0 0 21;B6 0 6 4;C3 5;};D13 9 41 69 100;D12 32 21 68 35;D12 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 76 69;D13 52 5 8 75 76 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 29;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 16;A1 26 50 64;B7 16;C3 6;D13 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Share option for email does not work after Yosemite upgrade.

Hi,
Does anybody know why the share option, "Share via email" does not work anymore after Yosemite upgrade? I love this feature. It's just quick and easy.
Rod.

On Yosemite, Pages '09 v4.3 no longer recognizes the Share > Send Via Email categories. You will have to export and manually drag/drop/attach documents to Mail. There is no fix.

Stuck at login screen after Yosemite Upgrade - 2013 27" imac won't recognize keyboard or mouse

Similar Messages

Maybe you are looking for