Stuck at start-up after TrueScript caused a restart on G560
Hi to everyone!
I beg for your help! My G560 got stuck on the start-up and it won't start Windows at all. It just has options F2 and F12 to enter setup or to chosse boot device, but doesn't work. Keyboard is functioning, CAPS Lock led is turned on and off for example, but pressing F2 doesn't give anything. If you react real quick and press F2 when computer has just started you will get "Entering setup..." crap instead of F2-F12 options, but it wouldn't move further than that.
As I understood there are 2 possible solutions: to take out hardware battery for BIOS on a motherboard (i'd rather not) and to boot using special flash-drive with some BIOS files on it.
Could you help meon both this solutions? I mean some links or step by step instructions would be really appreciated.
Thanks in advance!
Take out the hard drive and try to boot and enter bios. (F2)
If you can, the hard drive has problems.
Post back results.
Similar Messages
-
Stuck at "Starting Windows" after Deployment
Hello. I recently updated my MDT to 2013 as well as added the Windows assessment and deployment kit for Windows 8.1. Since then, I have one particular .wim image that I can't seem to deploy using MDT. It continuously gets stuck at "Starting Windows"
after it's first reboot from the deployment window. I have enabled logging and see this error appear quite often, but I'm not sure if that helps. I can provide the logs if needed.
Any help would be greatly appreciated!!
<![LOG[Error executing web service http://(SERVERNAME):9800/MDTMonitorEvent/PostEvent?uniqueID=&computerName=LENOVOT530&messageID=41017&severity=1&stepName=¤tStep=0&totalSteps=0&id=B1CAF581-522F-11CB-863C-9D12A921BFEC,3C:97:0E:7F:F3:3C&message=LTI initiating task sequence-requested reboot.&dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The operation timed out"Turns out it was something in the BIOS causing the issue. This linked helped me out.
http://social.technet.microsoft.com/Forums/windows/en-US/c0b9719c-657d-4366-b922-409561bb16c6/window-7-hang-up-at-starting-windows-screen-while-installing-with-uefi-mode?forum=w7itproinstall -
HP m8430f stuck on "Starting Windows" after April 10, 2012 Microsoft Updates
HP m8430f stuck on "Starting Windows" after April 10, 2012 Microsoft Updates. Upgraded to Windows 7 X64 from Vista X64 almost two years ago. Have never had any problems until morning of April 12th. I will cut to the final resolution to help anyone else who is going through this or will in the future. After trying to repair Win7, restoring back to factory recovery (got code purple), installing clean Vista 64 and trying upgrade to Windows 7 again, formatting drive using /p:2 option of writing 0's twice to whole drive and then doing a clean install of Win7 only to get to the same place of being stuck at "Starting Windows", I tried a trick I had read about. Boot to safe mode, you will get an error that you can complete install from safe mode. Don't close window but hit Shift-F10 and a cmd prompt will open. Type in compmgmtlauncher and choose Device Manager. Disable the Visx PureTV-U 48B0 under Sound, Video and Game controllers. Reboot computer and Win7 complete installation. Since I was able to get into Safe mode back on April 12th, I should have tried disabling everything then, but since it was working without problems before the updates, I couldn't believe that it was any of the devices. I have not been able to get around this issue with the tv-tuner, but I don't have a need for it right now for it. I saw a tip to try moving it to another pci slot and I will try that if I ever have a need to open the computer. Just wanted to document what to do to save others weeks of searching. If this is a driver issue, I can't believe HP or Windows hasn't come up with a more current driver. During all of the installs, I never get a yellow triangle for that device or any indication in Event log or anywhere that there was a problem with this device.
I had a similar issue with mine not working properly running Windows 7 Ultimate. Mine was working just fine for quite some time and then I moved my system into our TV room and hooked it up to the television, and used it there. Everything worked fine, I then returned it to the normal location but did not plug the IR sensor back in.
I had issues with it, I then plugged it back in and it seemed to be working fine, then started to freeze while we were working on it, it would do this all the time. I was thinking I had virus, I tried restoring windows to a previous working state. Upgrading my Virus software and everything. This was all back in October 2011. I finally just thought my system was going out after a number of years.
Then the other day for some reason I moved the IR sensor from one plug to the other. It is currently plugged into the bottom right USB port next to the RJ45 port. It seems to be working just fine now and I don't have the device you suggested disabled, though I will keep that in mind.
Thanks for you post, Hope mine helps too. -
Workflow stuck in starting state after applying SharePoint 2010 CU December 2012
I have custom visual studio workflow which are associated with Custom content type. workflow gets triggered automatically when a file is uploaded to SharePoint. Everything was working fine till when i apply the following CU
http://blogs.msdn.com/b/joerg_sinemus/archive/2012/12/27/sharepoint-2010-and-december-2012-cu.aspx
After applying this my workflow get stuck in "Starting" state.
No error were logged in 14 hive logs.
Thanks in Advance!It took me a while but I came up with a work around. There is a PowerShell script below that can be used to trigger the workflow. Hopefully this will hold all of us over until the official fix arrives.
First remove the auto start on change or new from the affected workflow
Edit the script below to match your environment
Add the script to Windows task scheduler with the PowerShell.exe in the command line
This assumes PowerShell.exe is in the path
Then add the full path and script name in the add arguements text box
Script:
#The purpose of this script is to start the SPD workflow with the windows task scheduler for a trigger
#This should avoid the check in-out issue caused by the December 2012 SP CU patch
#This needs to be run on an account with membership in the farm administration group for SharePoint and Shell in SQL
#You can use a find and replace to replace the server and other names with your actual names
#There are no status messages being used since this will be a scheduled task in the Windows task scheduler
#Add SharePoint modules and create variable space
add-pssnapin microsoft.sharepoint.powershell
start-spassignment -global
#Open the web site, list and the workflow
$site=get-spsite %site url%"
$web=get-spweb %Web url%
#Open the %affected% library or list and workflow association
$%affected%=$web.getlist("%affected%")
$manager=$site.workflowmanager
$culture=[system.globalization.cultureinfo]::currentculture
$wfname="%affected workflow name"
$association=$%affected%.workflowassociations.getassociationbyname($wfname,$culture)
$data=$association.associationdata
$wfrunoption=[microsoft.sharepoint.workflow.spworkflowrunoptions]::synchronous
#Start workflow
foreach ($item in $%affected%.items) {
$site.workflowmanager.startworkflow($item,$association,$data,$wfrunoption)
stop-spassignment -global -
Stuck in start-up after clicking continue once "Recovery Preparation is Complete"
I installed a new hard drive in my HP Envy 14 after the original one failed. I have a recovery USB drive that I am attempting to reinstall the operating system from (i.e., Factory Image). The recovery drive successfully reformats the drive and copies the files required to restore the operating system. Once I click "continue", the notebook restarts.
However, once it restarts, it is stuck at the HP opening screen and does not advance to the product installation screen.
Does anyone have any ideas as to how I can fix this?
Thanks!
Other notes: The original hard drive was 640GB. This hard drive is 500 GB.A smaller hdd than original often causes Recovery to fail.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Spiceworks stuck at 'starting server' after update to 7.4 auto installed
Hello;
I completely forgot to install the latest version, so today
when I went to my Spiceworks server to reset a password for one of my techs it
automatically ran the latest update.
Now Spiceworks will not work at all, when I try to start the
Spiceworks desktop, the splash screen just sits at the starting server,
progress bar never moves!
Now I have no Helpdesk ticketing system!
This topic first appeared in the Spiceworks Communitysuburbya wrote:
I installed Leopard successfully, but when i restarted my PB G4 it gets stuck at the login screen, it keeps giving me that rainbow colored waiting symbol, can't even turn it off without the power button...
Welcome to Apple's discussion groups.
Try booting with "safe mode" (http://support.apple.com/kb/HT1455) by holding down a "shift" key during the boot process. If that's successful, the problem is due to something within your account, possibly something that's incompatible with Leopard. Locating that thing could be an involved process. In the short run you might want to create a second user account and use that while you're repairing your main account. -
I have tried reset option but to no avail .......
one more try with the reset. hold those buttopns until you see the apple logo. ignore the red slider.
Then you are going to need to describe some symptoms so we can help you out. -
We have SPD workflows and Nintex workflows which are configured to start automatically on a Document Library which have content type. After we have been installed KB2687453
(sp2) , all the workfows running on documnet library with content type got strucked and always saying" starting". Please help us.,... highly apprciated as it's urgnet. Thanks in advance.Hi nart ,
It is a known issue. Please install the June 2013 CU to solve the problem.
June 2013 CU:
http://blogs.technet.com/b/stefan_gossner/archive/2013/06/12/june-2013-cu-for-sharepoint-2010-has-been-released.aspx
For more information, you can refer to the thread:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Workflows stuck in "Starting" state.
Workflows have been running fine for awhile. All workflows are currently stuck in a "Starting" state. Was finally able to capture this in ULS
03/20/2014 11:58:23.46 w3wp.exe (0x15AC) 0x2A98 SharePoint Foundation
Workflow Infrastructure 72fv Unexpected AutoStart Workflow: System.ArgumentException: Value does not fall within the expected range. at Microsoft.SharePoint.Workflow.SPWorkflowActivationProperties..ctor(SPWorkflow
workflow, String initiationData, Object context) at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflowElev(Object context, SPWorkflowAssociation association, DateTime elevationTimeUtc, SPWorkflowEvent startEvent, SPWorkflowRunOptions
runOptions) at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite superUserSite, SPWeb superUserWeb)
Any ideas?
TIAHi Milo,
Please check whether you have installed any CUs for SharePoint 2010.
Please install June 2013 CU or higher for SharePoint 2010, compare the result.
Here are some similar posts for you to take a look at:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service, I was able to retrieve all of my photos so the device is functional on that level. have restarted several times & also have restored data from i tunes. it said my phone is damaged.
Jailbreaking
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
IMAC intel A1208 is stuck on blue screen after start-up. What is the fix?
IMAC intel A1208 is stuck on blue screen after start-up. How can this condition be resolved?
Please carefully read Apple's Gray screen appears during startup
-
Node server0 stuck on starting framework exitcode = -11113
Hello experts, <br><br>
After installation, i'm able to start the SAP Server via mmc, the ABAP part is up and running, but my Java stack stucks on starting framework.<br><br>
Bellow, the "tail" of my developer trace<br><br>
612 com.microsoft.sqlserver.jdbc.Parameter$GetTypeDefinitionOp::setTypeDefinition (833 bytes)
613 com.microsoft.sqlserver.jdbc.DTV$SendByRPCOp::<init> (50 bytes)
614 java.lang.Math::min (12 bytes)
615 ! com.sap.engine.services.deploy.server.DeployServiceImpl::getApplicationInfo (2773 bytes)
616 com.microsoft.sqlserver.jdbc.SQLServerStatement::getNextResult (155 bytes)
617 com.sap.engine.lib.xml.parser.handlers.NamespaceEntry::levelDown (98 bytes)
618 s com.sap.engine.lib.util.cache.Cache::getByKey (145 bytes)<br><br>
Tue Apr 19 16:37:34 2011<br><br>
619 com.microsoft.sqlserver.jdbc.SQLServerResultSet::close (105 bytes)
620 java.io.ObjectInputStream$HandleTable::markDependency (171 bytes)
621 ! com.sap.engine.lib.xml.parser.XMLParser::scanEndTag (638 bytes)
622 java.lang.ref.ReferenceQueue::reallyPoll (58 bytes)
623 java.io.ObjectInputStream::checkResolve (48 bytes)
624 com.sap.sql.jdbc.basic.BasicResultSet::getString (11 bytes)
625 com.sap.engine.core.configuration.impl.cache.ConfigurationCache::releaseConfiguration (112 bytes)
626 com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement::buildServerCursorExecParams (202 bytes)
627 com.sap.tc.logging.LogController::<init> (206 bytes)
628 com.sap.engine.lib.xml.parser.handlers.NamespaceHandler::levelUp (44 bytes)
629 com.sap.engine.services.deploy.ReferenceObject::encode (294 bytes)
630 com.microsoft.sqlserver.jdbc.TDSReader::readLong (56 bytes)
631 com.microsoft.sqlserver.jdbc.SQLServerStatement$1NextResult::onRetStatus (28 bytes)
632 com.microsoft.sqlserver.jdbc.StreamDone::hasUpdateCount (1544 bytes)
633 com.microsoft.sqlserver.jdbc.SQLServerStatement$1NextResult::onDone (213 bytes)
634 java.lang.Math::max (11 bytes)
635 s com.sap.tc.logging.LogController::addLogNormalInt (139 bytes)
636 ! com.sap.engine.core.configuration.impl.cache.AccessController::getAccess (156 bytes)
637 com.sap.sql.jdbc.basic.BasicPreparedStatement::setInt (12 bytes)
Tue Apr 19 16:37:35 2011
638 com.microsoft.sqlserver.jdbc.SQLServerResultSet$FetchBuffer$FetchBufferTokenHandler::onDone (24 bytes)
639 com.sap.engine.lib.xml.parser.helpers.AdvancedXMLStreamReader::scanByte (17 bytes)
640 com.sap.engine.lib.xml.dom.AttrImpl::<init> (66 bytes)
641 com.microsoft.sqlserver.jdbc.TDSWriter::writeLong (211 bytes)
642 com.sap.engine.core.configuration.impl.PersistentDataInputStream::read (29 bytes)
643 com.sap.engine.lib.xml.parser.XMLParser::scanComment (377 bytes)
644 com.sap.engine.lib.xml.dom.DOMDocHandler1::getChd (115 bytes)
645 com.sap.engine.services.deploy.server.DUtils::getApplicationID (82 bytes)
646 com.sap.engine.services.deploy.server.DUtils::replaceForbiddenSymbols (122 bytes)
647 com.sap.engine.services.deploy.server.DeployServiceImpl::listApplications (53 bytes)
648 com.sap.engine.services.deploy.server.ReferenceResolver::getApplicationForComponent (59 bytes)
14.575: [GC 14.575: [ParNew: 181723K->20372K(245760K), 0.0281875 secs] 181723K->20372K(2015232K), 0.0282645 secs]
649 ! java.lang.ref.Reference$ReferenceHandler::run (108 bytes)
650 com.sap.engine.services.deploy.server.DUtils::getWord (84 bytes)
651 com.sap.engine.services.deploy.server.DeployServiceImpl::addApplicationInfo (227 bytes)
652 com.sap.engine.services.deploy.server.DUtils::isAlreadyAdded (45 bytes)
653 java.util.StringTokenizer::nextToken (92 bytes)
654 com.sap.engine.services.deploy.ReferenceObject::setCompositeName (269 bytes)
Tue Apr 19 16:37:36 2011
655 ! sun.security.provider.PolicyFile::getPermissions (250 bytes)
656 com.sap.engine.core.classload.impl0.LoadContextImpl::dfsCycleDetection (74 bytes)
657 java.util.ArrayList::RangeCheck (48 bytes)
658 s com.sap.engine.core.classload.impl0.LoadContextImpl::getReferences (23 bytes)
37% com.sap.engine.core.classload.impl0.LoadContextImpl::dfsCycleDetection @ 38 (74 bytes)
659 java.util.ArrayList::get (12 bytes)
660 java.util.ArrayList::remove (70 bytes)
661 java.util.ArrayList::ensureCapacity (68 bytes)
662 com.sap.engine.core.service630.container.LoadContextWrapper::checkName (54 bytes)
663 ! com.sap.engine.services.deploy.server.DeployServiceImpl::initializeApplications (1194 bytes)
664 s! java.net.URLStreamHandler::getHostAddress (54 bytes)
665 com.sap.engine.services.deploy.server.DeploymentInfo::getApplicationLoaderFiles (212 bytes)
666 ! java.util.zip.Inflater::reset (52 bytes)
667 s java.util.Vector::remove (82 bytes)
668 s! com.sap.engine.services.log_configurator.admin.LogConfigurator::adjustConfiguration (4223 bytes)
669 ! sun.nio.cs.SingleByteEncoder::encodeArrayLoop (356 bytes)
670* java.lang.System::currentTimeMillis (0 bytes)
38% ! sun.security.provider.SeedGenerator$ThreadedSeedGenerator::run @ 114 (243 bytes)
671 com.sap.engine.lib.xml.dom.DocumentImpl::updateDTDForAllElements0 (67 bytes)
672 com.sap.engine.lib.xml.dom.ElementImpl::setAttributeNodeNS (187 bytes)
673 java.util.LinkedList$ListItr::hasNext (20 bytes)
Tue Apr 19 16:37:37 2011
16.325: [GC 16.325: [ParNew: 184212K->21281K(245760K), 0.0204138 secs] 184212K->21281K(2015232K), 0.0204826 secs]
674 ! java.util.zip.Inflater::inflate (74 bytes)
675 sun.misc.URLClassPath$JarLoader::getResource (48 bytes)
676 java.io.ObjectOutputStream$BlockDataOutputStream::getUTFLength (124 bytes)
677 java.io.ObjectOutputStream$BlockDataOutputStream::writeBytes (144 bytes)
678 sun.misc.SoftCache::processQueue (47 bytes)
679 java.io.ObjectStreamClass::writeNonProxy (148 bytes)
680* java.lang.System::identityHashCode (0 bytes)
681 java.io.ObjectOutputStream$HandleTable::lookup (56 bytes)
682 java.io.ObjectOutputStream::clear (15 bytes)
683 com.sap.engine.lib.util.HashMapObjectObject::contains (60 bytes)
684 java.io.ObjectOutputStream::writeSerialData (135 bytes)
685 ! java.io.ObjectOutputStream::writeObject0 (551 bytes)
686 javax.naming.NameImpl::stringifyComp (604 bytes)
687 java.io.ObjectOutputStream$HandleTable::insert (39 bytes)
688 javax.naming.NameImpl::equals (126 bytes)
689 s java.util.Vector::elementAt (49 bytes)
690* java.security.AccessController::doPrivileged (0 bytes)
691 java.io.ObjectOutputStream$BlockDataOutputStream::writeShort (47 bytes)
39% java.security.Security::getProviderProperty @ 15 (60 bytes)
692 java.lang.String::charAt (33 bytes)
693 java.io.ObjectOutputStream$BlockDataOutputStream::writeUTF (46 bytes)
694 java.util.Vector$1::hasMoreElements (20 bytes)
695 com.sap.engine.frame.core.load.res.JarsResource::getClassInfo (43 bytes)
696 com.sap.engine.boot.FrameClassLoader::loadClass (7 bytes)
40% com.sap.tc.logging.LogController$Regarders::put @ 54 (104 bytes)
697 s! java.security.Security::reloadProviders (144 bytes)
41% javax.crypto.SunJCE_b::a @ 17 (55 bytes)
698 com.sap.engine.lib.xml.parser.XMLParser::<init> (403 bytes)
42% iaik.utils.Base64InputStream::read @ 134 (360 bytes)
699 javax.crypto.SunJCE_b::a (55 bytes)
43% iaik.utils.Base64InputStream::read @ 18 (360 bytes)
700 iaik.security.cipher.j::a (643 bytes)
44% iaik.utils.Base64InputStream::read @ 55 (360 bytes)
701 iaik.utils.Base64InputStream::read (360 bytes)
702 ! com.sap.engine.lib.xml.parser.URLLoaderBase::pop (58 bytes)
703 com.sap.engine.lib.xml.parser.helpers.AdvancedXMLStreamReader::getLastChar (6 bytes)
704 ! javax.crypto.SunJCE_b::c (271 bytes)
705 iaik.utils.CryptoUtils::squashBytesToInts (84 bytes)
706 com.sap.engine.services.dbpool.deploy.XMLUtils::processAliasesXML (377 bytes)
707 sun.reflect.AccessorGenerator::emitBoxingContantPoolEntries (1417 bytes)
708 java.security.Security::getEngineClassName (216 bytes)
45% java.util.Arrays::fill @ 10 (28 bytes)
709 java.io.ObjectOutputStream$HandleTable::<init> (45 bytes)
710 java.text.MessageFormat::applyPattern (360 bytes)
711 com.sap.engine.core.classload.impl0.LoaderInfo::getReferencesTo (83 bytes)
712 com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault::switchType (212 bytes)
713 com.sap.engine.core.configuration.impl.ValueEntry::<init> (40 bytes)
714 com.sap.engine.boot.ControlledCryptographyProvider::useProvider (50 bytes)
Tue Apr 19 16:37:38 2011
715 com.sap.tc.logging.LogController$Regarders::put (104 bytes)
46% com.sap.sql.sqlparser.SQLLexer::yy_unpack_cmap @ 32 (57 bytes)
716 sun.text.resources.DateFormatZoneData::handleGetObject (92 bytes)
717 s java.security.Security::insertProviderAt (92 bytes)
718 com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement::doExecutePreparedStatement (207 bytes)
719 com.microsoft.sqlserver.jdbc.SQLServerResultSet$FetchBuffer::<init> (42 bytes)
720 com.microsoft.sqlserver.jdbc.SQLServerConnection::setMaxFieldSize (49 bytes)
721 com.microsoft.sqlserver.jdbc.SQLServerConnection::setMaxRows (39 bytes)
722 com.sap.sql.jdbc.mss.MssInetJdbcObjectFactory::createResultSet (11 bytes)
723 com.sap.sql.jdbc.basic.BasicResultSet::close (10 bytes)
724 com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement::buildPreparedStrings (87 bytes)
725 com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PrepStmtExecCmd::doExecute (10 bytes)
726 ! com.sap.engine.core.configuration.impl.utilities.ConfigurationPath::getConfigurationPathInternal (154 bytes)
727 com.microsoft.sqlserver.jdbc.TDSTokenHandler::onRetStatus (13 bytes)
728 ! java.io.ObjectOutputStream::writeObject0 (551 bytes)
729 ! com.sap.engine.services.jndi.implclient.ClientContext::checkOperation (140 bytes)
730 s java.io.ByteArrayOutputStream::write (117 bytes)
731 com.sap.engine.lib.xml.parser.helpers.CharArray::trim (104 bytes)
732 javax.naming.NameImpl::extractComp (761 bytes)
733 java.io.ObjectOutputStream::writeOrdinaryObject (68 bytes)
734 java.lang.Long::appendTo (47 bytes)
Tue Apr 19 16:37:39 2011
735 java.io.ObjectInputStream::readHandle (110 bytes)
736 ! java.lang.StringCoding::encode (127 bytes)
737 java.lang.String::<init> (52 bytes)
738 com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl::existsValue (9 bytes)
739 com.sap.engine.frame.core.load.res.JarsResource::getClassInfo (43 bytes)
47% sun.misc.URLClassPath::getResource @ 3 (38 bytes)
740 com.sap.engine.lib.xml.parser.XMLParser::scanContent (197 bytes)
741 com.sap.engine.frame.core.load.NegativeCache::contains (69 bytes)
Tue Apr 19 16:37:40 2011
742 s! java.util.Hashtable::clone (99 bytes)
743 ! java.util.zip.ZipFile$ZipFileInputStream::close (63 bytes)
744 s java.util.Vector::size (5 bytes)
48% ! com.sap.engine.lib.xml.parser.readers.EncodedDataReader::readData @ 127 (175 bytes)
745 sun.misc.URLClassPath::getResource (38 bytes)
746 ! com.sap.engine.lib.xml.parser.readers.EncodedDataReader::readData (175 bytes)
747 ! com.sap.engine.lib.xml.parser.XMLParser::scanAttList (644 bytes)
748 com.sap.engine.lib.xml.dom.CharacterDataImpl::setParent (6 bytes)
749 com.sap.engine.lib.xml.dom.NodeImpl::ensureChildren (61 bytes)
750 com.sap.engine.lib.xml.dom.NodeImpl::checkChildNodeType (84 bytes)
751 com.sap.security.core.role.imp.xml.XMLServiceAction::addPermission (100 bytes)
752 ! com.sap.engine.lib.xml.dom.DOMDocHandler1::addAttribute (179 bytes)
753 com.sap.engine.lib.xml.dom.ElementImpl::init (99 bytes)
754 java.nio.ByteBuffer::<init> (45 bytes)
755 com.sap.engine.lib.xml.dom.Base::getChildNodes (4 bytes)
756 com.sap.engine.lib.xml.dom.NodeListImplEmpty::getLength (2 bytes)
757 java.util.HashMap::put (113 bytes)
758* java.util.zip.Inflater::inflateBytes (0 bytes)
759 ! java.util.zip.InflaterInputStream::read (127 bytes)
Tue Apr 19 16:37:49 2011
760 ! com.sap.engine.frame.core.load.ResourceLoader::loadClass (171 bytes)
761 sun.misc.URLClassPath$JarLoader::getResource (48 bytes)
762 ! java.io.ObjectStreamClass::lookup (236 bytes)
763 com.sap.engine.services.jndi.implclient.Schema::init (85 bytes)
764 java.io.ObjectOutputStream$HandleTable::assign (52 bytes)
765 ! com.sap.engine.lib.xml.parser.XMLParser::scanAttList (644 bytes)
766 com.sap.engine.lib.xml.dom.AttrImpl::getNodeType (2 bytes)
767 com.sap.engine.lib.xml.dom.Base::getParentNode (2 bytes)
768 com.sap.engine.lib.xml.dom.DOMDocHandler1::startElementStart (95 bytes)
769 com.sap.engine.lib.xml.parser.helpers.DefaultAttributesHandler::clearDefaultCheck (43 bytes)
Tue Apr 19 16:37:50 2011
770 com.sap.engine.lib.xml.parser.helpers.CharArray::set (47 bytes)
771 com.sap.sql.sqlparser.SQLKeywords::hash (169 bytes)
772 iaik.security.md.Md5::engineReset (59 bytes)
773 ! com.sap.sql.jdbc.direct.DirectPreparedStatement::setLong (196 bytes)
774* java.lang.reflect.Array::newArray (0 bytes)
775 iaik.security.md.SHA::engineReset (67 bytes)
49% com.sap.tc.logging.ListFormatter::escape @ 31 (153 bytes)
776 java.lang.StackTraceElement::toString (140 bytes)
777 com.sap.tc.logging.ListFormatter::escape (153 bytes)
778 ! com.sap.engine.core.classload.impl0.LoaderInfo::loadClassByReference (57 bytes)
779 ! java.net.URL::<init> (531 bytes)<br><br>
[Thr 6788] JLaunchIExitJava: exit hook is called (rc = -11113)<br>
[Thr 6788] **********************************************************************<br>
ERROR => The Java VM terminated with a non-zero exit code.<br>
Please see SAP Note 943602 , section 'J2EE Engine exit codes'<br>
for additional information and trouble shooting.<br>
**********************************************************************<br>
[Thr 6788] JLaunchCloseProgram: good bye (exitcode = -11113)<br>
<br><br>
Could anybody help? I have already checked the note mentioned above, but got no sucess.
Edited by: egamer on Apr 19, 2011 9:52 PMI have also found this at my std.server0.out:
Core service security failed. J2EE Engine cannot be started.
com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:194)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:80)
at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:405)
at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:84)
at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:58)
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:147)
... 5 more
com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:194)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:80)
at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:405)
at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:84)
at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:58)
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:147)
... 5 more
[Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
Apr 19, 2011 4:39:32 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_27] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
781 ! java.util.zip.ZipFile$ZipFileInputStream::close (63 bytes) -
ReportApplicationServer (RAS) stuck at starting on BO XI 3.1 SP2
Greetings,
We have been facing a problem with the RAS service. The status of the server is stuck on starting and doesn't go to a started state. All other servers start normally
Our Environment:
OS: Windows Server 2008
BO: BOXI 3.1 SP2 Clustered (2 servers)
CMS Database: Oracle 10G
Web Tier Components: WebLogic 10.3
All other BO servers start normally. The problem appears on only one of the clustered servers. The other member of the cluster has not issues.
We enabled tracing and this is the error part:
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||(.\oscafactory.cpp:748) successful after bind factory
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||(.\rasdtsfactory.cpp:262) CRASDTSFactory::CreateServices() returns successfully
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||OSCASimpleFactory::isDisabled() 1
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||
TraceLog 2010 4 6 10:32:56.782 9248 9940 (*:0) (.\dts\dts.cpp:2683): CDTSApp::InitInstance(): m_bsCMSMachineName is [ECCBOP201.aramco.com:6400]
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||
TraceLog 2010 4 6 10:32:56.782 9248 9940 (*:0) (.\dts\dts.cpp:1235): CreateAgent: creating agent=1
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||
TraceLog 2010 4 6 10:32:56.782 9248 9940 (*:0) (.\dts\dts.cpp:2747): CDTSApp::InitInstance() returns 1
2010/04/06 07:33:51.715|==| | | 9248|9928| |||||||||||||||CNSClientManager::CheckObjects() : search fails(37) - Transport user error: object with the specified name not found.
2010/04/06 07:33:51.715|==| | | 9248|9928| |||||||||||||||(.\nsclient.cpp:2151) Failed to resolve object. Reregister all...
2010/04/06 07:33:51.825|==| | | 9248|9928| |||||||||||||||(.\nsclient.cpp:2155) succeed.
2010/04/06 07:33:51.825|==| | | 9248|3324| |||||||||||||||OSCASimpleFactory::isDisabled() 1
2010/04/06 07:33:51.825|==| | | 9248|3324| |||||||||||||||(.\oscadtsfactory.cpp:231) OSCADTSFactory_impl::newService() throwing because server is disabled: serviceName[Auditing], descriptor[]
2010/04/06 07:33:53.825|==| | | 9248|8772| |||||||||||||||OSCASimpleFactory::isDisabled() 1
2010/04/06 07:33:53.825|==| | | 9248|8772| |||||||||||||||(.\oscadtsfactory.cpp:231) OSCADTSFactory_impl::newService() throwing because server is disabled: serviceName[Auditing], descriptor[]
Notes
The appliaction crystalras.exe is allowed through the firewall.
Any ideas?
ThanksWe have resolved the problem (minutes after posting it!)
There are two NIC cards on the sever and apparently that caused the issue.
Resolution:
1. Log on to CmcApp
2. Go to Servers
3. Go to the properties of the ReportApplicationServer
4. Under Common Settings:Host Identifiers:IP Addres: Specify the IP of of the primary NIC card of the BO Server.
5. Save and close
6. Restart the ReportApplicationServer
Regards,
Hassan -
My iMac 27-inch is stuck at start up
My 27-inch iMac is stuck at start up. The Apple logo is present and the whiz wheel spins but nothing happens. It's been like that for a couple of hours now. It started right after I updated to OS X Maverick. Does anyone have an idea how to fix this? Thanks.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
IMacs getting stuck at start up
Last week, out of the blue, when I went to turn on my iMac the computer would get stuck at start-up: grey screen, spinning wheel but didnt start. Eventually the fan would come on and after 5-6 minutes it would restart and the same thing would repeat: grey screen, spinning wheel. I took it to the Apple store and the genius ran DiskWarrior and found a number of directory errors. He rebuilt the HD and things appear to be working fine again. But now my partner's iMac (same kind, G5) is doing the same thing. I rebuilt his HD with our copy of DW and it worked for a few days but now the same issue. I am running DW again but I am wondering if there is an issue with the OS that could be causing this problem. It is becoming a real hassle!
Start with the links in the yellow banner on the lead page: http://discussions.apple.com/category.jspa?categoryID=235
Maybe you are looking for
-
Advice on which Mac laptop to buy / Advice about using WIndows on it.
I'd appreciate some advice on which replacement laptop to get for someone in my family who just needs e-mail, the Internet, and iPhoto--something simple, small, and portable, like the iBook or the MacBook Combo. However, he has just complicated matte
-
ORA-04043: object SYS.DELTA$SESSION does not exist
Dear Friends after I import my data by using the follwoing import script : IMP JCC/P_MANUF FILE =JCC.DMP FULL and at the end give this message import has been imported succesfully without warning then when I use this script : SQL> SELECT TNAME FROM T
-
Okay I don't know if this is an Apple problem or a Windows problem, so I hope this is the right place to post this. I recently (i.e. yesterday) purchased a 32GB 5th generation iPod Touch. When I try syncing music to it (I sync music manually), it syn
-
Client Security Solution - System Key Recovery - After Lenovo Service
I have a T61p running Windows 7, which I recently had to send to Lenovo for service after the video failed. According to my repair summary, the motherboard on the computer was replaced. I received the laptop back today, and now when I log on, the sys
-
Running a Mac OS X-based internet café or wireless hotspots?
I am interested to know if anyone has any experience running an automated billing system for an internet café and/or wireless hotspots using elegant OS X software. If someone could share their experience or point me in the direction of software or ot