Stuck at the evil 'recovery' message

updated software, tried to back up phone, but it stopped short & stuck at the evil 'recovery' button.  Will I loose calendar entries, recent pictures & video ?  Anyway around the evil recovery so I can use my phone again ?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

  • HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete

    I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.

    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • I can't install Lion, I get the "No Recovery" message.

    I can't install Lion, I get the "No Recovery" message. I do not have a boot camp partition. I have backed up and completed a clean install of Snow Leopard. Lion would still not install. Please help?

    Did you completely erase your drive when you reinstalled SL? If not, I would make sure that you erase the drive completely. Then install SL and make sure you run Software Update. If you already did all of those, then do it again, but this time make a bootable drive for Lion using the Lion OS X Install App. I believe you can find instructions on how to do that by searching this community or doing a google search.
    Once you have a bootable drive of Lion, then shut your machine down. Plug in the bootable drive and turn the machine on. Once you hear the tone hold down 'C' until you see the spinning clock/bars. The Lion Install menu should appear. If not, try going to the Apple icon and select Startup. Next a window should appear showing your bootable drive. Select that and follow the directions.
    Make sure that when you reinstall SL that you don't restore any of your Apps or files yet, wait to do that once you have Lion installed.

  • HP recovery disc failure with the following error message

    Notebook:
    HP Pavilion g7-1070us
    OS: Window 7 home premium 64-bit
    Problem:
    Notebook failed to start. Bought recovery disc set from HP and tried to do the factory restore (Factory image recovery)
    The first two steps went smoothly:
    1) "Reformatting the window partition of the ard drive;"
    2) "Copying files required to restore the hard-drive;"
    But at step 3: "Restoring files to the hard-drive", when the progress bar showed 46%, it got stuck and the following  error message popped up:
    Copy File Fails
    From: E:/PRELOAD/BASE3.SWM
    To: C:/RM/Image/BASE3.SWM
    I tried a few times and every time it got stuck at exactly the same point.
    PLease help!!!! Thanks a lot!!

    Hi,
    Assuming this is just a problem with the recovery media, here's an alternative option you could try.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • So I was updating my boyfriend's iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have ev

    So I was updating  iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions

    Are you following these instructions?
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • HT5642 my ipod is stuck in the recovery mode since 2 days and it is not restoring with itunes

    my ipod is stuck in the recovery mode since 2 days and it is not restoring with itunes
    plzz help me friends

    What exactly happens when you restore via iTunes? Error message?

  • STUCKED IN THE RECOVERY MODE..........!!!!!!!!!!!!!!

    hi everybody i got my ipad stucked in the recovery mode . i tried to resore it by preserving the same ios. i used the " SHIFT RESTORE"  and when it arrives at the internal installation it gives message error 1013 ..." the ipad can't be restored"... help please

    now m in the recovery mode can't exit it...

  • HT1414 my ipad 3 doesn't go to the DFU mode help me cause it's stuck on the recovery mode

    help me :
    my ipad 3 stuck on the recovery mode and when i restore it the itunes gives me errors -_-

    What does the error message say?
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • HT1414 ipod touch..when I plug in to laptop, itunes, I get this message.  "Itunes could not connect toehe Ipod because it is locked with a passcode.  You must enter your passcode on the ipod b/4 it can be used with Itunes"  It is stuck on the cord/itunes

    ipod touch..when I plug in to laptop, itunes comes up and I get this message.  "Itunes could not connect to thehe Ipod because it is locked with a passcode.  You must enter your passcode on the ipod b/4 it can be used with Itunes"  It is stuck on the cord/itunes screen and cannot go any further...HELP

    Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.

  • HT4623 I was downloading the new IOS and message could not find Iphone - Now my mhone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

    I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

    So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
    Reboot both the computer and the phone and try again.

  • Error message: this computer is not supported by the system recovery media.

    I replaced a bad samasung hard drive in my Pavilion dv6z 3200 with a Seagate Momentus XT 750 GB 7200RPM SATA 6Gb/s 32 MB Cache 2.5 Inch Solid State Hybrid Drive ST750LX003 and when trying to restore Windows 7 64 bit OS get the error message "this computer is not supported by the system recovery media"

    Is the new hdd at least as large a capacity as the original? Can be larger capacity, but sometimes smaller will cause error.
    Enter BIOS by tapping F10 key. Is all system info intact/complete?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Internet recovery gets stuck on the spinning globe with the progress bar below.

    Hello Everybody!
    I'm trying to fix the iMac (27-inch, Mid 2010) of my friend. He said it doesn't boot anymore and just gets stuck on the grey screen with the Apple logo and the spinning wheel below. So my first step was to go into the Startup Manager by pressing the Option key after the chime. There I was presented with the Macintosh HD and the Recovery HD. After selecting the Recovery HD to access the Disk Utilities I got stuck on the grey screen with the Apple logo and the spinning wheel again. So I guess the data on the drive is corrupted and might have to be replaced. But before I do that, I wanted to give the Internet Recovery a try. I connected the iMac to the internet using an ethernet cable and pressed Command + Option + R after the chime and the spinning globe appeared with the info: "starting recovery process from network. This may take a while". After a short time the sentences are replaced by a progress bar and a timer that is counting up. The progress bar then moved for a tiny little bit and then nothing happens anymore but the timer keeps counting up. I waited for quiet some time before I gave up. I did not get any errors so I can't provide any other useful information. Can anyone give my some advice? I read in other posts that the ISPs of specific countries block ports which are needed for the internet recovery. I'm in Thailand right now. Does anyone know if that might cause the problem?
    Thank you for all your help!

    Neither we nor Apple support jailbroken iDevices.

  • I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What can I try to cancel

    I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What else can I try to cancel

    Can you log on to the email account via webmail in a web browser, view the email and delete it from there if necessary.

  • I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

    I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

    If you want to use it, click Review and check your account information.  Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

  • Help - my ipod touch is stuck in the itunes screen, computer recognizes it when I plug it in, but won't restore, wants to restore and update, but get error message.  now what

    ok -  my ipod touch is stuck on the itunes screen.  Have tried shutting it off, plugging it into my windows computer, and it does recognize that it's there.  it goes to restore mode, then immediately goes to restore and update.  then back to restore mode,  then an error message.  don't know where to go from here,  any suggestions?

    Try here:
    iOS: Not responding or does not turn on
    iPod touch: Hardware troubleshooting

Maybe you are looking for

  • Save As dialog hangup (Plug-in for Firefox)

    Hi folks, I'm running Firefox 5.0, equipped with the Adobe Acrobat (Reader?) 10.1.0.534 Plug-In for Firefox, on several fully patched XP Pro systems.  On a regular basis I view publicly accessible/non-DRMd PDFs via the Plug-in and save a copy by mous

  • Updated file not being recognised

    After using 'Find and Replace' in Dreamweaver 8 to do a global edit or template change on files in my site I've noticed that DW recognising that the update has been made. For example, when making an edit that corrects an HTML file's syntax so that it

  • Typography with a thin stroke and a fat problem...

    ok... <sigh> My client chose this thick type that didnt look good and asked me to thin it out. I decided to do it by adding a 0.25 stroke inside all the fonts i didnt want bold (its like 70% of a 6 page document). When i was sending the pdf to the cl

  • Setting Minimum RSSI threshold for client connections

    Hi, We are deploying a new wireless network for guest users of private lounges at airports, using a 5508 WLC and 3501 AP's. The SSID uses open L2 authentication with a web auth passthrough login splash page. We require preventing people outside these

  • Blue Print Template for SSM 7.0

    Hi SAP guys, Could somebody share me the Business Blue Print Template for implementating SSM 7.0 Best Regards Shashi