Stuck between installing updates and off screen!?

MacBook ran out of battery, and turned off, I then went to charge it and now can't install updates and goes to black screen    with this sign on it

The message is ...
The iPad "iPad" could not be updated. An unknown error occurred (3004)
There is a More Information button which takes you to an Apple help page but that doesn't help
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support
Thanks

Similar Messages

  • HT4623 MY iPad screen is stuck on the "terms and conditions screen.  I tap the agree button and the send  email button, but nothing happens.  Please help.

    While trying to update my Ipad to the new operating systemm my screen is stuck on the "Terms and Conditions" screen.  I tried touching the "agree" button and the "send my email" button, but nothing happens.  I can't get out of the screen without missing my full update.  Please help.

    completely switch off your ipad with pressing the top power button  really long and then swipe the red swiper at the top. Then turn your  ipad back on, skip the icloud login screen and you should be good!  That's what i did so should work for you too

  • Windows Update in Endless Loop of 'Installing updates" and "Undoing changes" on New Windows 8.1 Pro Install

    I am setting new Windows 8.1 Pro computers, and am installing Windows 8.1 Pro to bare drives.  Everything goes fine until Windows Update starts installing updates, and then the computer goes for hours installing updates, and then "We
    could not complete the updates Undoing changes".   It's an endless loop. It seems to be the same 38 updates.  This is a recent phenomenon.  I have not run into this until the last week or two on several new computer installs.
    Again these are brand new installs, so something is clearly wrong with the Windows updates.
    If anyone can please tell me how to avoid this, it would be much appreciated.
    Michael

    Hi Michael,
    "  This is a recent phenomenon"
    Have you made any modifications to the machines ?
    To resolve this issue ,running the built-in troubleshoot tool is a very good beginning .It will automatically diagnostic the windows update components and check the configurations for us .
     Control Panel\All Control Panel Items\Troubleshooting\Fix problems with Windows Update
    If there are antivirus software installed in these machines, please turn off them temporarily to have a check.
    The command line included in the link as S.Sengupta posted is very useful and convenient to repair the windows corrupted files .We can have a try .
    "sfc /scannow" ,"DISM.EXE /online /cleanup-image /restorehealth "
    We also can check the windowsupdate.log for more information to troubleshoot this issue .
     Run "windowsupdate.log"
    If you have trouble in analyzing the log ,please upload them to the OneDrive and paste the link here .
    Best regards

  • Repeatedly getting stuck on spinning wheel and grey screen, even after multiple re-installs of the OS

    Ok, so running Lion on a MacBook, (2010 i think) and the OS got corrupted(stuck on spinning wheel and grey screen on boot)
    Tried to repair the disk via disk utility using an install CD, no go, couldn't repair, so, did a clean install.
    New install went fine, computer worked for about 3 days and then stuck on the spinning wheel again.
    suspecting physical damage to the harddrive, I installed the OS to an external, and booted from there. Worked for a couple days and then stuck on the spinning wheel.
    I have repeated the process 5 times now, each time it works for a little and then craps out again.
    What's going on?
    as a note, when I say it gets stuck on the spinning wheel, I have left it for 12 hours trying to boot to no avail.

    The Apple Hardware Test doesn't always detect all errors.
    Next time you get the gray screen/spinning wheel, try booting into the Safe Mode to see if it will boot.
    Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    Startup Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Startup Issues - Resolve (3)

  • Windows 8.1 Pro Workstations - Not Getting "Install Updates and Shut Down" notification for new updates

    We've got a small handful of Windows 8.1 Pro workstations on our domain (SBS 2008).
    The workstations show up in the WSUS Console list along with the details of how many updates need to be installed.
    On the Windows 8.1 Pro workstations, at the logon screen they display "Important Updates Are Available. Go to PC Settings to install them".  If we go to PC Settings or Windows Updates via Control Panel the updates show as awaiting installation.
    However, we can't rely on users to go into PC Settings or Control Panel to install Windows Updates. We need them to be installed as per Windows 7 and Windows XP - whereby when the user shuts down their workstations it displays the message "Install Updates
    and Shutdown".
    Currently the Windows 8.1 Pro workstations do not show this - if you choose to shut down there are no update installation messages and the workstations simply shut down.
    Has anyone else encountered this? What needs to be done?
    Thanks in advance.
    I don't work for Microsoft - I just use their products.

    It does sound weird yes.
    Id like to try and mirror your setup in my lab.
    What settings do you have in your WSUS GPO?
    Have you seen this, in the 'Configure Automatic Updates' setting?
          On Windows 8 and later, you can set updates to install during automatic maintenance instead of a specific schedule. Automatic maintenance will install updates when the computer is not in use, and avoid doing so when the computer
    is running on battery power. If automatic maintenance is unable to install updates for 2 days, Windows Update will install updates right away. Users will then be notified about an upcoming restart, and that restart will only take place if there is no potential
    for accidental data loss.
            Automatic maintenance can be further configured by using Group Policy settings here: Computer Configuration->Administrative Templates->Windows Components->Maintenance Scheduler
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • 'Install Updates and Shutdown' option not appearing for Windows 8.1 users

    Windows 8.1 users are reporting, and I have verified, that they are not being prompted to install Windows updates while shutting down, even though the updates are downloaded.  Here are the relevant Windows Update gpo's from a sample Group Policy Result
    for a typical user on one of our Windows 8.1 workstations:
    (Note: The "Specify intranet Microsoft update service location" is the last policy in the updates section, and the value specified there is not relevant to this question.)
    These same settings when applied to Windows XP workstations used to prompt users to install updates at shutdown.  That is, the default shutdown option was "Install Updates and Shutdown".  That was a great workflow because all client workstations
    were shut down every night and the user didn't have to worry about updates installing while they were using the workstation.  All client workstations are now running Windows 8.1 Pro and the only way updates are getting installed is by manually pulling
    up the Windows Update dialog and initiating updates from there.  That is even worse than automatic updates that install during business hours.
    I do notice that
    a notification that updates are available appears in the login screen, but one can not take action upon it from there, and most users don't know how to find the update screen once they sign in; and
    once updating is begun, then the Install Updates and Shutdown option becomes a default - but by that point its rather cosmetic: that is the only option (to configure the partially installed updates during shutdown) and there is nothing
    that could be done to NOT do that at that point. 
    Is anyone having similar issues?  As far as I can tell right now, there is no ability to actually switch the user's default option to
    Install Updates and Shutdown in the same way as in previous Windows editions even though the GPO is identical.

    Hi,
    >>Is anyone having similar issues?  As far as I can tell right now, there is no ability to actually switch the user's default option to
    Install Updates and Shutdown in the same way as in previous Windows editions even though the GPO is identical.
    Regarding this point, the following blog may provide a good explanation.
    Minimizing restarts after automatic updating in Windows Update
    http://blogs.msdn.com/b/b8/archive/2011/11/14/minimizing-restarts-after-automatic-updating-in-windows-update.aspx
    Best regards,
    Frank Shen

  • Windows 8/8.1 - No Option for "Install Updates and Shut Down"

    We’ve got a handful of Windows 8 workstations and I’ve noticed that users don’t get the “Install Updates and Shut Down” option when they shut their systems down. Nor do they get the updates icon in the notification area.
    Instead, all they get is the following message at the logon screen:
    There is no way I can expect my users to do this.
    I need to ensure that the updates are installed when the user shuts down.
    There must be a way of configuring Group Policy to allow Windows 8 workstations to prompt to install updates when the user shuts down.
    I cannot implement an option whereby updates are installed automatically without the user being aware. If updates start installing automatically then there is the potential for loss of work if a user is away from their desk for a long period of time and
    their system just restarts to complete the installation.
    Our current group policy settings are below. This works fine for the Windows 7 workstations.
    I presume others have experienced this? Can anyone offer any guidance?
    Thanks
    Current Group policy settings:-
    Client Computers Policy:-
    Configure Automatic Updating – 3 – Auto download and notify for install
    I don't work for Microsoft - I just use their products.

    I am sorry but this is NOT an answer.
    You're correct. It's not. Microsoft has some overzealous contractors who seem to think any response is "the answer". I've unmarked the post, because, in fact, it was merely "additional information" which may or may not have addressed the
    original issue.
    I, like the original poster, have several computers that do NOT offer 'Install Updates' in any of the power menus and definitely do NOT install the updates during either a restart or a shutdown.
    Now *THAT* is an entirely *DIFFERENT* situation than what the Original Poster has offered here, so the appropriate thing for you to do is to start a NEW THREAD and fully describe the environment and symptoms of the problem and what you've done (if anything)
    to try to identify, isolate, or remediate the undesirable behavior.
    The PCs I have are Windows 8.1 installed from a partner copy of Windows 8 and upgraded.
    I'm intrigued with this "partner copy of Windows 8" thing. Have you asked "the partner" what they customized in the installation image before you actually installed the product???
    Can someone please offer a SOLUTION as opposed to parroting what SHOULD happen.
    Not until you provide us with some actionable information. :-)
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Dreaded SP3 "Install Updates and Shut Down"?

    Help!  My t400 just started insisting as a default choice "install updates and shut down" when I try to shut down. 
    It used to just go with the last thing I chose - so if I hit the off botton last time and said restart, that would pop up this time.
    NOW, it wants to "install updates." What updates? I did something in windows update that was supposed to block the installation of Service Pack 3, but now I'm scared to death that SP3 is trying to hijack my machine. 
    Is there a way to a) find out exactly what updates it wants to install, and b) go back to how things were - when I hit the power botton my last shut down choice (sleep, restart etc) is what comes up?????
    Thanks!

    I am sorry but this is NOT an answer.
    You're correct. It's not. Microsoft has some overzealous contractors who seem to think any response is "the answer". I've unmarked the post, because, in fact, it was merely "additional information" which may or may not have addressed the
    original issue.
    I, like the original poster, have several computers that do NOT offer 'Install Updates' in any of the power menus and definitely do NOT install the updates during either a restart or a shutdown.
    Now *THAT* is an entirely *DIFFERENT* situation than what the Original Poster has offered here, so the appropriate thing for you to do is to start a NEW THREAD and fully describe the environment and symptoms of the problem and what you've done (if anything)
    to try to identify, isolate, or remediate the undesirable behavior.
    The PCs I have are Windows 8.1 installed from a partner copy of Windows 8 and upgraded.
    I'm intrigued with this "partner copy of Windows 8" thing. Have you asked "the partner" what they customized in the installation image before you actually installed the product???
    Can someone please offer a SOLUTION as opposed to parroting what SHOULD happen.
    Not until you provide us with some actionable information. :-)
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • BCT - how to find the difference between installed BCT and the newest BCT?

    Hi,
    How do I find the difference between installed BCT and the newest BCT?
    or find a description of the newest BCT?
    Thank you.
    - Gunnar

    Hi,
    Thank you for your answer.
    I am aware of the possibilities you mention.
    I am looking for a way to find the parts of the business content that has been modified since I installed our current version WITHOUT installing anything.
    That is for example:
    If F&R business content has been moved from 3.x technology to 7.0
    If there is changes to the F&R content at all
    -> if our current version of business content already contains the newest version of Business Content for F&R, then it is not a prerequirement to an F&R project that we update business content.
    The possibility to see that the only changes might be in the area of SAP HCM ...
    Thank you.
    - Gunnar

  • Difference between Maintenance update and recommended patches.

    Hello
    What is the difference between "Maintenance Update" and "Recommended patches" ?
    Can we install the OS from the distribution, then install the recommended patches and have a decent system. Or we do need to install the maintenance update before the recommended patches ?

    Hi,
    What do you mean of Manual Update.
    Simulation means , it will not upload into the data to the datatarget,It just explore you about how the system goes through update rules,Transfer rules .
    real upload/Update manually means the data will reach the datatarget and sits there with out explore you about how the system goes through update rules,Transfer rules .
    With rgds,
    Anil Kumar Sharma .P

  • Which one is faster loading type between Insert/Update and Update/Insert?

    Hi Gurus,
    Could anyone tell me which loading type faster between Insert/Update and Update/Insert?Any resolution and document reference would be grateful.
    Regards,
    Joni

    910575 wrote:
    Thanks Purvesh for your quick response..
    Yes you are right, we have to prefer sql rather than plsql. But if i have 1 lakh records to be inserted then my insert into select will do insert one by one that mean context switching is more to server i.e 1 lakh.
    If i use BULK COLLECT+ FORALL then in a single switch the lakh records will be inserted right?
    I agree that when we have less number of records to insert we can prefer insert into select, if we have huge data then why not FORALL ?
    You have just tested for 107 records, but in huge data it is different right?
    Thanks,
    VinodYou've misunderstood how it works, I think. When you do the "insert into ... select", Oracle works out what rows need to be inserted and does them in one fell swoop. That's 2 context switches only, with the bulk of the work being done by the SQL engine.
    When you do the BULK COLLECT + FORALL, you're telling Oracle to first identify the rows (that's two context switches straight off; one from PL/SQL to SQL and then back to PL/SQL again), load them into a collection, then loop through the collection and insert the records X rows at a time (which could be all records or whatever you set as the LIMIT on the FORALL) (again, with the context switching between PL/SQL and SQL and back again through each loop).
    Which one sounds like it does the least amount of work? Not the BULK COLLECT, right?

  • Trying to install update and error message says older version of itunes cannot be removed

    trying to install update and error message says older version cannot be removed

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Macbook 101 stucks on apple logo and changing screen colour to grey and whitej

    CAnt power it on stucks on apple logo and changing screen colour to grey and white

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Startup Issues - Resolve (3)

  • My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear

    My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear....please help!!!???

    Do a reset
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • HT203167 I am stuck on the terms and conditions screen.  I checked the box and cannot do anything to see my downloads.  What should I do?

    Please help!  I am stuck on the terms and conditions screen.  I checked the box and  cannot get to my downloads.  What should I do?

    Have you tried resetting (Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears) and starting the set up again?

Maybe you are looking for