Stuck D2 MIDI Note Happens Only In Logic

I have a very strange problem happening that I can't seem to figure out. When I am in Logic and hit the D2 note on my M-Audio Ozone keyboard, no "note off" message is sent when I lift off the key. My keyboard is only two octaves so it has "octave up" and "octave down" keys. Even switching octaves, it is only the D2 note that is affected, not the physical key.
I have tried duplicating the problem in Garageband and in Mainstage, but everything works as expected in those two apps. I have also tried using the Caps Lock keyboard in Logic, but that works fine.
I tried looking in my Environment for anything strange, but I don't see duplicate devices or a midi filter that would prevent the D2 note off message.
I tried restarting both the MacBook and the interface. I also did a factory reset on the M-Audio Ozone. I'm at a loss on what to try next.
Crib notes:
- no "note off" message on D2 note only, and only from M-Audio Ozone, and only in Logic
- M-Audio Ozone works perfectly in Garageband and Mainstage
- Caps Lock keyboard D2 note works correctly in Logic
Message was edited by: DigitalRelay

Hello, a long time ago i posted something about trying to get L8 working on mac g4, and you tried your best to help me!
since then i have upgraded so much.
im using the new imac with Lepoard and logic pro 8 and i have various controlers, keyboard etc....
but i've got a really big problem
no one seems to have an answer!
this even happens when my control surface (bcf2000) is unplugged
bassicaly which ever track i'm on - on logic...when ever it decides to
the volume fader Jumps, so say i'm on -0.9 it will just decide to jump to +1.0 then back down again (even if im recording automation or just not playing the project) there's no automation on the track its nothing like that, sometimes this problem will happen lots!! then not as much other times
it only does it to the track i'm on
nothing is being moved no faders or nothings being sent (midi messages)
i think its the fader on logic its self because it does this with nothing plugged in atall !! (keyboard,controlers etc) its really driving me crazy, i cant do anything about it.
if anyone could help me please do ....thanks so much
James

Similar Messages

  • Document Splitting not happening (only for one profit center  1000)

    Hi,
    The Bank GL account 13000010  is assigned a default Profit center 1110.
    After Posting an entry,
    ENTRY VIEW SHOWS
    Bank AC       CR.........                                             10000                                     (since default PC is 1110 )
              Vendor A/c             DR                                                                      10000              Profit center 1000
    whereas the same in GENERAL LEDGER VIEW shows
    Bank AC       CR.........                                             10000                                      Profit center 1110
              Vendor A/c             DR                                                                      10000              Profit center 1110       * * * *
    It does not take already defined  zero balance clearing account into consideration, and gives the above GL view output
    This is not the case with any other Profit centers i give in Vendor line item (The progfit center in case of vendor line item is derived from Cost Center Master Data)
    Also, If i post the same entry, giving Debit effect first,
    ENTRY VIEW
    Vendor A/c             DR                                                        10000              Profit center 1000
                   Bank AC       CR.........                                                      10000                                     (since default PC is 1110 )
    GENERAL LEDGER VIEW IS AS FOLLOWS:
    Vendor A/c             DR                                                        10000                         Profit center 1000
                   Bank AC       CR.........                                           10000                         Profit Center 1110                       
    Zero Balance Clearing a/c DR                                             10000                         Profit center 1000
                  Zero Balance Clearing a/c CR                               10000                         Profit Center 1110
    Here, It is taking Zero Balance Clearing account into consideration.
    Please assist on the same...........

    Dear
    Since default profit center 1110 is defined in fagl3keh system has taken correctly profit center as default profit center as 1110.  I could not understand how you can put profit center in vendor debit.  Since bank credit default profit center is 1110 naturally vendor debit is taken from the default profit center 1110 and vendor debit is also posted to profit center 1110 and not 1000.  Please check once again.  I think there is no difference if vendor is either posted first or second.  If you need to have debit as profit center as 1000 then you may have to choose bank account pertaining to profit center 1000.
    Regards

  • Facebook photo albums display fine but when I click on an individual picture in the album only the caption displays. (does not happen when I use AOL as my browser)

    In Facebook, when I click on any individual photo it will not display. Everything, including the caption, displays fine but not the picture itself. If I use AOL as my browser this does not happen, only on Firefox.

    Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
    A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.<br />
    A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").<br />
    Open the <i>Media</i> tab of the "Page Info" window.<br />
    Select the first image and scroll down though the list with the Down arrow key.<br />
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.<br />
    See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Load balancing not happening on UDQ in weblogic 11g

    Hi Team,
    I have a 2 clusters with two managed servers each on different machines
    Cluster A(On machine 1)
    Managed server A (on machine 1)
    Managed server B(on machine 2)
    I have created 2 JMS servers
    JMS Server A on Managed server A
    JMS Server Bon Managed server B
    and a JMS module on Cluster A
    and JMS connection factory targeted on Cluster A and a uniform distributed queue targeted on JMS server A and JMS Server B
    But load balancing is not happening only one managed server is loaded at a time.. Using weblogic 11(aka 10.2.3)
    Tried disabling server affinity but it did not help ...Can any one please let me know how to fix this?

    Hi,
    When you say load is not balanced and reaching only one managed server.
    I assume both the UDD's targets are reachable and are visible in JNDI tree ?
    also , what kind of application is it - i,e is it clustered app that would be seen as consumers on each UDQ ?
    take a look at the app and check if its clusterred . along with that also take a look at the number of consumers on UDQ instances.
    Let me know what you find.
    Sri

  • Constantly getting Stuck Midi Notes w/ LP & Digi 002R

    Running LP 7.1 & Tiger on a G5 DualCore 2.0
    I'm constantly getting stuck notes (hanging) with using a Digi002R's midi ports going to a Roland XV5080, the other is going to a Motif ES. It's happening more than just once in a while. Any ideas on what is causing it?

    Crazyhorsestudios wrote:
    I don't have 8.02 installed just what came in the box 8.0. Yes I am using the DAE Engine as it activates because I am playing audio through the Digi002R.
    That may be it. But I have to believe I am not the only one using MTPAVs as they are extremely popular. They all can't be using Unitors?
    Completely legal I have the box any everything. I wouldn't even know would you even get a cracked version. Too problems taking me away from music to add bootleg software to the mix.
    You should be able to upgrade to 8.02 via Software Update or in Apple's download section. The initial release of Logic 8 was terribly buggy.
    Choose an external MIDI track. In the "Inspector" on the left hand side of the screen you will see the Port: designation. Do all of the MTP's show up there, whatever you do don't set it to ALL. You should be able to choose the correct MTP and underneath that, the channel.
    You might try disabling DAE and see if the problem persists.
    Here's another idea. Are you using MIDI Clock Sync on any of your external synths.
    Go to Settings/Synchronization/MIDI Tab
    If you're not using MIDI clock sync.. set all "Destinations" to off and then disable every checkbox, same for MTC and MMC.
    If you are using MIDI clock sync activate the Send MIDI Clock checkbox and select only a single MTPav as the destination.
    Remember, Settings are on a per song basis, Preferences are Global.
    Thanks for answering the bootleg question, lately there's been quite a bit of that around here.. these are user forums and it makes it difficult to try and help people when they're using old dodgy version of plugins and programs they shouldn't have in the first place.
    p.s. you aren't using rewire for anything, are you?

  • MIDI notes sent during record ready mode AND whenever I start Logic Pro and

    Why is Logic Studio pro sending a MIDI note whenever I am writing a new AUDIO track? I get a steady pulse during record ready mode AND this also happens each time I open a project up. ( although it only sends ONE midi note (NOT repeating) when I open up a project)
    I have eliminated it by simply turning off the midi interface but this is hardly a fix.
    thanks for any help!
    Bob

    Is it doing this for all projects? Did you change anything in the Environment window? All MIDI gets routed through there. You could attach a monitor object to your MIDI tracks in the Environment to try to see what's going on...although first I would make sure no other programs on your computer could be interfering.

  • A  project on iMovie 09 that  Freezes(only the project)  the viwer window blocked in gray ... .. After editing that  took me a year I'm stuck . All my finished projects that are in the Library infected with the same symptoms and it happens only after I w

    a  project on iMovie 09 that  Freezes(only the project)  the viwer window blocked in gray ... .. After editing that  took me a year I'm stuck .
    All my finished projects that are in the Library infected with the same symptoms and it happens only after I went into the problematic project.  
    I tried to open a new project and everything works
    ...I also tried throwing Recent Files, in the past It solved the problem ,not this time ...
    the problem is that this project will take me a long, long time to rebuild
    imovie 09
    Model Name:          iMac 
      Model Identifier:          iMac10,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz

    This recently happened to me.  I am a novice, but it seemed like that project got corrupted some how.
    I deleted it.
    Went to time machine and picked it up again when I knew it was working ok.
    I lost a few hours of work, but not the entire project.
    Once I had the project back from time machine, it worked fine (but like I said, I lost a little bit of work).

  • Midi note B below middle C is being played as Eb (below middle C) in the region only

    When I'm recoding midi I'm running into a very strange problem..... randomly the B below middle C gets re-routed to Eb (below middle C). It shows right visually in the region, and when I go back to the controller and play the B note it plays correctly but when playing back the region it plays the Eb. Sometimes it will play back correctly but after a while it will happen and when it happens there is no way to make it do anything else....i tried other plugins , other tracks but it stays the same. Again, when you open the region to look at the midi, the midi notes are in the right place, if I click on the Bb note in the region it plays an Eb but if I go to the controller and play a B it plays a B...???. I have looked through everything to try and find anything that would be causing this but haven't found any reason for this.... it is very strange that it is only happening to one note and it always does the same thing....B to Eb....

    Yep, that's a known glitch. Very hard to repeat, but reports keep trickling in. There are a few solutions though, but no method of preventing it. Since I reported it first, I haven't encountered it again. Knock on wood.
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=99041&p=523387
    http://www.logicprohelp.com/forum/viewtopic.php?p=517486#p517486
    https://discussions.apple.com/message/22796767#22796767
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=104849

  • Why is my midi data not showing up on Logic Pro X?

    So i've been working on this project for a while now and for some reason out of no where the midi data is not showing up. every time i click on a region, it doesn't open up the midi data for that track, but instead only opens up the data for a different track. No matter what region i try to open, it always goes to that one specific region, and if i try to click in notes it only puts them in on that region. furthermoer, the MIDI draw refuses to work. it will not let me pitch bend, change note velocities, or anything. Am i missing something obvious or what?? please help, this is one of my favorite projects so far and I don't want to trash it because i can't do anything with it.

    Just happened to me. Then realized that I had clicked the "link" button off in the Piano Roll Editor and clicking it back on fixed it.

  • Logic randomly playing midi notes.  How do I turn it off?

    When i solo a track logic triggers a midi note. same with mute and selecting and pretty much every button and menu in logic triggers a midi note or CC. What is going on here? My midi keyboard keeps playing notes cuz logic keep triggering them.
    Solo plays a F1
    Mute plays a E1
    Record plays a C2
    selecting a track plays a D4
    Everything triggers a midi note or CC.  it's bugging me a messing up my sessions.  Pleases help me.

    Andrew_to wrote:
    This is happening to me to. Everytime I open logic to work on something new, the midi instrument just keeps looping C2 over and over again. What gives?
    Is it C2 or C-2?

  • Getting external software to trigger midi notes in a logic project

    Happy new years guys,
    I've recently figured out how to use a 3rd party software (e.g. ableton live) to input midi notes into logic.
    so i can set up an ES2 in logic, and use the software (ableton) as the source of midi info. great.
    however, when i press the "spacebar" (i.e. play) to kick off my logic project, ableton is not playing as well.
    ableton would play synced if logic was opened 1st, and ableton was the re-wire slave. but in re-wire slave mode, ableton has no midi outs !!
    so on the 1 hand, i can open ableton 1st, then logic - which would give me the ability to use midi events in ableton to trigger ES2, but then I can't sync the playback of logic + ableton.
    on the 2nd hand, i can open logic 1st, then ableton - which would let me press spacebar in logic, and ableton would then run synced as the slave. but this way, ableton has no midi outs, as its runnin in re-wire slave mode !!
    what i really want to do is just use ableton as the midi sequencer / trigger, and use logic for everything else (mixing, effects, ES2 synth, ESM etc.)
    i just want to use ableton to edit / create my midi info etc.
    anybody have suggestions on how I can achieve this?
    i appreciate your time / responses. this forum has been a great help for me.
    ian

    There's a couple of things to try...
    If you're only using Ableton as the MIDI sequencer...
    See if Ableton has the ability to sync to "MIDI Clock" and MIDI Song Pointer if possible.
    Go into Logic's synchronization and enable MIDI Clock Out.
    I don't know if the current IAC bus will do ot if you have to crteate a second.
    The second way would invlove MTC (Midi Time Code) over a second IAC bus.

  • Logical standby stuck at initializing SQL apply only coordinator process up

    Hi
    OS: solaris 5.10
    Hardware: sun sparc
    Oracle database: 11.2.0.1.0
    Primary database name: asadmin
    Standby database name: test
    I had been trying to convert a physical standby to logical standby database. Both the primary and standby reside on the same machine.
    The physical standby was created with a hot backup of primary.
    I had been following document id 278371.1 to convert the physical to logical standby and used the following steps:
    Relevant init parameters on primary:
    *.db_name='asadmin'
    *.db_unique_name='asadmin'
    *.log_archive_config='dg_config=(asadmin,test)'
    *.log_archive_dest_1='location=/u01/asadmin/archive valid_for=(all_logfiles,all_roles) db_unique_name=asadmin'
    *.log_archive_dest_2='SERVICE=test async valid_for=(online_logfiles,primary_role) db_unique_name=test'
    *.log_archive_dest_state_1='enable'
    *.log_archive_dest_state_2='enable'
    *.fal_client='asadmin'
    *.fal_server='test'
    *.remote_login_passwordfile='EXCLUSIVE'
    Relevant init parameters on standby database:
    *.db_name='test' -- Was asadmin before I renamed the DB during conversion to logical standby
    *.db_unique_name='test'
    *.log_archive_dest_1='location=/u01/test/archive valid_for=(all_logfiles,all_roles) db_unique_name=test'
    *.log_archive_dest_2='service=asadmin async valid_for=(online_logfiles,primary_role) db_unique_name=asadmin'
    *.log_archive_dest_state_1=enable
    *.log_archive_dest_state_2=defer
    *.remote_login_passwordfile='EXCLUSIVE'*.fal_server=test
    *.fal_client=asadmin
    Steps on primary:
    1) alter system set log_archive_dest_state_2=defer;
    2) shutdown immediate;
    3) Made sure that the physical standby has applied all of the redo sent to it following the shutdown.
    4) startup mount;
    5) ALTER DATABASE BACKUP CONTROLFILE to '/home/oracle/control01.ctl';
    6) ALTER SYSTEM ENABLE RESTRICTED SESSION;
    7) ALTER DATABASE OPEN;
    8) Verified that the supplemental logging is on.
    9) ALTER SYSTEM ARCHIVE LOG CURRENT;
    10) Checked for the checkpoint change no. at this point which is 72403818 and is present in archive log file 1_62_775102253.dbf
    11) EXECUTE DBMS_LOGSTDBY.BUILD;
    12) ALTER SYSTEM ARCHIVE LOG CURRENT;
    13) Checked for the archive log containing dictionary build which is 1_64_775102253.dbf
    14) ALTER SYSTEM DISABLE RESTRICTED SESSION;
    Details of archive logs and related checkpoint change nos:
    NAME FIRST_CHANGE# NEXT_CHANGE#
    /u01/asadmin/archive/1_61_775102253.dbf 72402901 72403817
    /u01/asadmin/archive/1_62_775102253.dbf 72403817 72404069
    /u01/asadmin/archive/1_63_775102253.dbf 72404069 72404211
    /u01/asadmin/archive/1_64_775102253.dbf 72404211 72405700
    Steps on standby:
    1) shutdown immediate;
    2) Copy the archivelog file 61(was created at primary after apply stopped at standby), 62(contains checkpoint no. 72403818), 63 and 64(contains dictionary build). Copy the backup controlfile from step 5 above to the controlfile location in standby init.
    3) startup mount;
    4) Rename all datafiles and redo log files (including standby redo log files) to the correct path on standby.
    5) alter database recover automatic from '/u01/test/archive' until change 72405700 using backup controlfile; -- This completed error-free
    6) alter database guard all; -- this completed error free
    7) alter database open resetlogs; -- this completed error free.
    8) nid target=sys/oracle12 dbname=test
    9) Changed the db_name in init file to new name test.
    10) Added a tempfile to temp tablespaces.
    11) ALTER DATABASE REGISTER LOGICAL LOGFILE '/u01/test/archive/1_61_775102253.dbf'; -- ORA-16225: Missing LogMiner session name for Streams
    12) ALTER DATABASE START LOGICAL STANDBY APPLY INITIAL 72405700; -- This completed error free.
    Also enabled the log_archive_dest_state_2 on primary.
    After this output from some views:
    SQL> SELECT SESSION_ID, STATE FROM V$LOGSTDBY_STATE;
    SESSION_ID STATE
    1 INITIALIZING
    SQL> SELECT SID, SERIAL#, SPID, TYPE FROM V$LOGSTDBY_PROCESS;
    SID SERIAL# SPID TYPE
    587 22 15476 COORDINATOR
    SELECT PERCENT_DONE, COMMAND
    FROM V$LOGMNR_DICTIONARY_LOAD
    WHERE SESSION_ID = (SELECT SESSION_ID FROM V$LOGSTDBY_STATE);
    PERCENT_DONE
    COMMAND
    0
    SQL> SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
    TYPE HIGH_SCN STATUS
    COORDINATOR ORA-16111: log mining and apply setting up
    SQL> SELECT APPLIED_SCN, NEWEST_SCN FROM DBA_LOGSTDBY_PROGRESS;
    APPLIED_SCN NEWEST_SCN
    72405700 72411501
    SELECT THREAD#, SEQUENCE#, FILE_NAME FROM DBA_LOGSTDBY_LOG L
    WHERE NEXT_CHANGE# NOT IN
    (SELECT FIRST_CHANGE# FROM DBA_LOGSTDBY_LOG WHERE L.THREAD# = THREAD#)
    ORDER BY THREAD#,SEQUENCE#;
    no rows selected
    SQL> SELECT EVENT_TIME, STATUS, EVENT
    FROM DBA_LOGSTDBY_EVENTS
    ORDER BY EVENT_TIMESTAMP, COMMIT_SCN; 2 3
    EVENT_TIME STATUS EVENT
    14-FEB-12 02:00:50 ORA-16111: log mining and apply setting up
    14-FEB-12 02:00:50 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 02:20:11 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 02:20:39 ORA-16111: log mining and apply setting up
    14-FEB-12 02:20:39 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 02:54:15 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 02:57:38 ORA-16111: log mining and apply setting up
    EVENT_TIME STATUS EVENT
    14-FEB-12 02:57:38 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 03:01:36 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 03:13:44 ORA-16111: log mining and apply setting up
    14-FEB-12 03:13:44 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 04:32:23 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 04:34:17 ORA-16111: log mining and apply setting up
    14-FEB-12 04:34:17 Apply LWM 72405699, HWM 72405699, SCN 72405699
    EVENT_TIME STATUS EVENT
    14-FEB-12 04:36:16 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 04:36:21 ORA-16111: log mining and apply setting up
    14-FEB-12 04:36:21 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 05:15:22 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 05:15:29 ORA-16111: log mining and apply setting up
    14-FEB-12 05:15:29 Apply LWM 72405699, HWM 72405699, SCN 72405699
    I also greped for lsp and lcr processes and found that lsp is up but do not see any lcr.
    The logs are getting transported to the archive destination on standby whenever they are archived on primary but are not getting applied to standby.
    Also in case the standby is down while a log is generated on primary it is not automatically transported to standby once the standby is up, means gap resolution is also not working.
    I see the following in alert log every time I try to restart the log apply, everything seems to be stuck at initialization.
    ALTER DATABASE START LOGICAL STANDBY APPLY (test)
    with optional part
    IMMEDIATE
    Attempt to start background Logical Standby process
    Tue Feb 14 05:15:28 2012
    LSP0 started with pid=28, OS id=23391
    Completed: alter database start logical standby apply immediate
    LOGMINER: Parameters summary for session# = 1
    LOGMINER: Number of processes = 3, Transaction Chunk Size = 201
    LOGMINER: Memory Size = 30M, Checkpoint interval = 150M
    LOGMINER: SpillScn 0, ResetLogScn 0
    -- NOTHING AFTER THIS

    Hello;
    I noticed some of your parameters seem to be wrong.
    fal_client - This is Obsolete in 11.2
    You have db_name='test' on the Standby, it should be 'asadmin'
    fal_server=test is set like this on the standby, it should be 'asadmin'
    I might consider changing VALID_FOR to this :
    VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES)Would review 4.2 Step-by-Step Instructions for Creating a Logical Standby Database of Oracle Document E10700-02
    Document 278371.1 is showing its age in my humble opinion.
    -----Wait on this until you fix your parameters----------------------
    Try restarting the SQL Apply
    ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATEI don't see the parameter MAX_SERVERS, try setting it to 8 times the number of cores.
    Use these statements to trouble shoot :
    SELECT NAME, VALUE, UNIT FROM V$DATAGUARD_STATS;
    SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME LIKE ;TRANSACTIONS%';
    SELECT COUNT(1) AS IDLE_PREPARERS FROM V$LOGSTDBY_PROCESS WHERE
    TYPE = 'PREPERER' AND STATUS_CODE = 16166;Best Regards
    mseberg
    Edited by: mseberg on Feb 14, 2012 7:37 AM

  • I have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in  finder

    i have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page to get back to previous page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in  finder

    Hi..
    I repled to you here >  https://discussions.apple.com/message/25598596#25598596
    Please do not start duplicate topics. It makes it that much harder to assist you.

  • In printing only a specific selected section, the top line or 2 of the printout is not printing. This only happened since the last update. It does not happen when I use internet explorer.

    I read many financial documents during the day. I sometimes print only a selected segment of an article or a financial statement. When I print selected only, the top line or 2 lines is omitted from the print document. It does not happen in explorer.
    I used Firefox for years, and this just started in the last 3 weeks or so. I can get around it by just selecting 2 lines above what I want to print. But, it is annoying.

    * [[Printing a web page]]
    * [[Firefox prints incorrectly]]
    Check and tell if its working.

  • HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

    HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
    I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
    I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
    How can I make this printer work on my iMac?
    I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
    Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
    I am open to questions or suggestions
    Thanks,
    Chet

    After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
    The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
    My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
    Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
    Chet

Maybe you are looking for