Stuck during init scripts ...
I did one quite big system update today, when were xorg packages about to install, suddenly x.org restarted itself. I had to repeat upgrade part of install and everything else seemed fine. But, when i was restarting pc, I noticed in shutdown scripts message like "umount: device is busy". After that, every time I try boot arch, boot stops at "Mounting local filesystems ... [BUSY]". Is possible to chroot to disk and content looks alright, I even tried fsck(in case that my understanding of how works is right) partition with system but it doesnt helped at all ... Any advices will be greatly appreciated ...
try chrooting in and redownloading various packages pertaining to bootup(with pacman). Like initscripts and filesystem and filesystem specific tools.
You might have caught the bug in pacman that sometimes pacman doesn't install all files in packages. I've had this happen to me when i was installing lots of packages.
Similar Messages
-
Cannot render video - stuck during "Initializing video export..."
Hi,
I am trying to render videos in PS CC 2014.
Running win7x64 with 16GB ram.
These videos were already rendered in previous version - PS CC with no problems!
When I try to render in PS CC 2014 I get stuck during the first stage, right after i select "rebder Video...".
I am stuch in the next stage when ik says :"Initializing video export"
My task manager shows PS keeps using %25 during this time.
What can I do to solce this?
I even installed Media Encouder CC 2014 becasue I read that it migh be related but it did not help.
Please help....
My system properties are:
Adobe Photoshop Version: 2014.0.0 20140508.r.58 2014/05/08:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 3092 MHz
Built-in memory: 16320 MB
Free memory: 12144 MB
Memory available to Photoshop: 14619 MB
Memory used by Photoshop: 69 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
Display: 2
Display Bounds: top=0, left=1920, bottom=1050, right=3600
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=1024
glgpu[0].GLName="AMD Radeon HD 5800 Series"
glgpu[0].GLVendor="ATI Technologies Inc."
glgpu[0].GLVendorID=4098
glgpu[0].GLDriverVersion="14.100.0.0"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="AMD Radeon HD 5800 Series"
glgpu[0].GLRendererID=26777
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atium d64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm6 4.dll"
glgpu[0].GLDriverDate="20140417000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.30"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[2147 483647]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[108]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[18]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[18]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.2 AMD-APP (1445.5)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (1445.5)"
clgpu[0].CLMemoryMB=1024
clgpu[0].CLName="Cypress"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="1445.5 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=1.06319e+011
clgpu[0].CLCompute=193.867
License Type: Tryout Version
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Chupi\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 927.7G, 527.2G free
S:\, 55.9G, 33.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,7
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib(2).dll AMTLib (64 Bit) 8.0.0.45 BuildVersion: 8.0; BuildDate: Fri Mar 28 2014 20:28:30) 1.000000
amtlib.dll AMTLib (64 Bit) 7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50) 1.000000
amtlib.org.dll AMTLib (64 Bit) 8.0.0.45 BuildVersion: 8.0; BuildDate: Fri Mar 28 2014 20:28:30) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
FileInfo.dll Adobe XMP FileInfo 2013/10/25-03:51:33 79.154511 79.154511
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt42.dll International Components for Unicode 4, 2, 0, 0
icuin42.dll International Components for Unicode 4, 2, 0, 0
icuuc42.dll International Components for Unicode 4, 2, 0, 0
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.762
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.762
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.762
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
ONCore8.dll ONCore 7.0.0.0
ONCoreFoundation8.dll ONCoreFoundation7 7, 0, 0, 0
ONDocument8.dll ONDocument 7.0.0.0
onOneActivationToolbox.dll onOneActivationToolbox 1.1
onOneToolboxPlus.dll onOne Toolbox2 Dynamic Link Library 2.2.0
OnOneWidgets.dll OnOneWidgets dll 2.5
ONProxySupport.dll TODO: <Product name> 1.0.0.1
ONProxySupport8.dll ONProxySupport 1.0.0.0
PatchMatch.dll PatchMatch 2013/10/29-11:47:16 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.0
Plugin.dll Adobe Photoshop CC 2014 15.0
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.0
PSViews.dll Adobe Photoshop CC 2014 15.0
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
zlib.dll zlib 1.2.5
Required plug-ins:
3D Studio 15.0 (2014.0.0 x001)
Accented Edges 15.0
Adaptive Wide Angle 15.0
Angled Strokes 15.0
Average 15.0 (2014.0.0 x001)
Bas Relief 15.0
BMP 15.0
Chalk & Charcoal 15.0
Charcoal 15.0
Chrome 15.0
Cineon 15.0 (2014.0.0 x001)
Clouds 15.0 (2014.0.0 x001)
Collada 15.0 (2014.0.0 x001)
Color Halftone 15.0
Colored Pencil 15.0
CompuServe GIF 15.0
Conté Crayon 15.0
Craquelure 15.0
Crop and Straighten Photos 15.0 (2014.0.0 x001)
Crop and Straighten Photos Filter 15.0
Crosshatch 15.0
Crystallize 15.0
Cutout 15.0
Dark Strokes 15.0
De-Interlace 15.0
Dicom 15.0
Difference Clouds 15.0 (2014.0.0 x001)
Diffuse Glow 15.0
Displace 15.0
Dry Brush 15.0
Eazel Acquire 15.0 (2014.0.0 x001)
Embed Watermark 4.0
Entropy 15.0 (2014.0.0 x001)
Export Color Lookup NO VERSION
Extrude 15.0
FastCore Routines 15.0 (2014.0.0 x001)
Fibers 15.0
Film Grain 15.0
Filter Gallery 15.0
Flash 3D 15.0 (2014.0.0 x001)
Fresco 15.0
Glass 15.0
Glowing Edges 15.0
Google Earth 4 15.0 (2014.0.0 x001)
Grain 15.0
Graphic Pen 15.0
Halftone Pattern 15.0
HDRMergeUI 15.0
IFF Format 15.0
Ink Outlines 15.0
JPEG 2000 15.0
Kurtosis 15.0 (2014.0.0 x001)
Lens Blur 15.0
Lens Correction 15.0
Lens Flare 15.0
Liquify 15.0
Matlab Operation 15.0 (2014.0.0 x001)
Maximum 15.0 (2014.0.0 x001)
Mean 15.0 (2014.0.0 x001)
Measurement Core 15.0 (2014.0.0 x001)
Median 15.0 (2014.0.0 x001)
Mezzotint 15.0
Minimum 15.0 (2014.0.0 x001)
MMXCore Routines 15.0 (2014.0.0 x001)
Mosaic Tiles 15.0
Multiprocessor Support 15.0 (2014.0.0 x001)
Neon Glow 15.0
Note Paper 15.0
NTSC Colors 15.0 (2014.0.0 x001)
Ocean Ripple 15.0
OpenEXR 15.0
Paint Daubs 15.0
Palette Knife 15.0
Patchwork 15.0
Paths to Illustrator 15.0
PCX 15.0 (2014.0.0 x001)
Photocopy 15.0
Photoshop 3D Engine 15.0 (2014.0.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.0 (2014.0.0 x001)
Pinch 15.0
Pixar 15.0 (2014.0.0 x001)
Plaster 15.0
Plastic Wrap 15.0
PNG 15.0
Pointillize 15.0
Polar Coordinates 15.0
Portable Bit Map 15.0 (2014.0.0 x001)
Poster Edges 15.0
Radial Blur 15.0
Radiance 15.0 (2014.0.0 x001)
Range 15.0 (2014.0.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.0
Ripple 15.0
Rough Pastels 15.0
Save for Web 15.0
ScriptingSupport 15.0
Shake Reduction 15.0
Shear 15.0
Skewness 15.0 (2014.0.0 x001)
Smart Blur 15.0
Smudge Stick 15.0
Solarize 15.0 (2014.0.0 x001)
Spatter 15.0
Spherize 15.0
Sponge 15.0
Sprayed Strokes 15.0
Stained Glass 15.0
Stamp 15.0
Standard Deviation 15.0 (2014.0.0 x001)
STL 15.0 (2014.0.0 x001)
Sumi-e 15.0
Summation 15.0 (2014.0.0 x001)
Targa 15.0
Texturizer 15.0
Tiles 15.0
Torn Edges 15.0
Twirl 15.0
Underpainting 15.0
Vanishing Point 15.0
Variance 15.0 (2014.0.0 x001)
Viveza 2 2.1.19.1
Water Paper 15.0
Watercolor 15.0
Wave 15.0
Wavefront|OBJ 15.0 (2014.0.0 x001)
WIA Support 15.0 (2014.0.0 x001)
Wind 15.0
Wireless Bitmap 15.0 (2014.0.0 x001)
ZigZag 15.0
Optional and third party plug-ins:
Alias PIX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Analog Efex Pro 1.0.11.216
Analog Efex Pro 2 2.0.4.323
BackgroundFilter 2.2.16.323
Camera Raw 8.6
Camera Raw Filter 8.6
Color Efex Pro 4 4.3.16.323
Dfine 2 2.2.16.323
ElectricImage 13.0
FineStructuresFilter 2.2.16.323
Flood NO VERSION
HDR Efex Pro 2 2.2.16.323
Hidden NO VERSION
HotPixelsFilter 2.2.16.323
HSB/HSL 13.0
Lighting Effects Classic 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Merge to HDR Efex Pro 2 2.2.16.323
Nik Collection Selective Tool 2.1.21.323
Noiseware 5.0.2.0
Perfect Batch 8 8.5.1
Perfect BW 8 8.5.1
Perfect BW 8 Filter 8.5.1
Perfect BW 8 Smart Filter 8.5.1
Perfect Effects 8 8.5.1
Perfect Effects 8 Filter 8.5.1
Perfect Effects 8 Smart Filter 8.5.1
Perfect Enhance 8 8.5.1
Perfect Enhance 8 Filter 8.5.1
Perfect Enhance 8 Smart Filter 8.5.1
Perfect Mask 8 8.5.1
Perfect Mask 8 Filter 8.5.1
Perfect Mask 8 Smart Filter 8.5.1
Perfect Portrait 8 8.5.1
Perfect Portrait 8 Filter 8.5.1
Perfect Portrait 8 Smart Filter 8.5.1
Perfect Resize 8 8.5.1
Perfect Resize 8 Engine Automation 8.5.1
Perfect Resize 8 Engine Filter 8.5.1
Perfect Resize 8 Filter 8.5.1
PhotoFrame 4.6 Professional Edition 4.6.7 (Suite 6.1)
PhotoFrame 4.6 Professional Edition Batch 4.6.7 (Suite 6.1)
PhotoFrame 4.6 Professional Edition Hidden 4.6.7 (Suite 6.1)
SGI RGB 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ShadowsFilter 2.2.16.323
Sharpener Pro 3: (1) RAW Presharpener 3.1.19.1
Sharpener Pro 3: (2) Output Sharpener 3.1.19.1
Silver Efex Pro 2 2.2.16.323
SkinFilter 2.2.16.323
SkyFilter 2.2.16.323
SoftImage 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
StrongNoiseFilter 2.2.16.323
Topaz Adjust 5 10.0
Topaz BW Effects 2 10.0
Topaz Clarity 10.0
Topaz Clean 3 10.0
Topaz DeJpeg 4 10.0
Topaz DeNoise 5 10.0
Topaz Detail 2 10.0
Topaz Detail 3 10.0
Topaz InFocus 10.0
Topaz Lens Effects 10.0
Topaz photoFXlab 10.0
Topaz ReMask 4 10.0
Topaz ReStyle 10.0
Topaz Simplify 4 10.0
Topaz Simplify 4 10.0
Topaz Star Effects 10.0
Wavefront RLA 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plug-ins that failed to load: NONE
Flash:
onOne
Adobe Kuler
Installed TWAIN devices: NONEDo you have quicktime installed? It use to have to have it, I am not sure if that is true any more, now that the media encoder is included. It could also be due to your version is a trial version. It may be lacking a key feature that would be installed in the full version. (just guessing)
-
ISE 3315 stuck in INIT Entering runlevel: 3
Hello
my ISE 3315 is stuck in
ISE 3315 stuck in INIT Entering runlevel: 3
when i connect a screen and keyboard i can only see this last message :
ISE 3315 stuck in INIT Entering runlevel: 3
There is nothing after, i cannot login (no prompt) even after waiting 20 minutes with this message
I have no char return via serial cable depsite i was able to run initial setup from console (same cable, the DB9-DB9 provided, same serial config, same laptop)
really strange
Version ADE : ADE-OS-2.0 (2.6.18-238.1.1.el5PAE)
Version ISE : 1.1.0.665
Any idea ?
Thanks
GuillaumeHello,
for me i can say it is too slow if you don't have a DNS and a NTP server accessible from the ISE.
It is requested to have both servers during initial setup, and with that, it is running faster (let's say 30 minutes to do all initial setup ...)
Hope it helps ! -
Posssible to redirect the content of SCREEN during init/userspace?
I went to IRC the other day and asked where the userspace errors are usually located, a lot of users pointed me in the /var/log direction. But I can't for the life of me find anything that's related to userspace, only kernel errors.
Example: (sorted by now) netcfg complains during init theres a profile error bla bla, naturally I try to grep "Profile x error" in every log from /var/log but the result gives me nothing.
Where do we locate standard userspace errors? if there's no way other than using scroll lock, can't we take the output and direct it to a log instead?
Thank Youbender02 wrote:
greenfish wrote:Where do we locate standard userspace errors? if there's no way other than using scroll lock, can't we take the output and direct it to a log instead?
I think it's the matter of each "userspace" program to allow and arrange for logging of its output, via the config file and/or by command line switches, or automatically. If you need to capture output of a particular program/daemon run during the startup, you can always restart it (sudo /etc/rc.d/<daemon_name> restart) to get its output again, or better, take a look at how is the program actually run by looking at the script /etc/rc.d/<daemon_name> and try to run it from command line manually (especially if it doesn't allow reasonably logging its output).
sorry for the delay guys, I guess you have to manually subscribe to each thread in order to recieve an update.
bender02 hmm I see, I guess that makes sence but still it's gonna be a whole mess going through the entire daemon path just to see which one is causing the errors, and those are just daemons, what about standard errors in userspace? Your idea is sound though, now I only need to find out exactly what process/daemon is causing my mess and write the output > file. Thanks dude!
@sjovan problem resolved, but most of the errors I get in userspace isn't visible with "dmesg" thanks anyways! -
Stucked during 37.th step when instaling BI system
When instaling BI system I am stucked during 37.th step (Install software units.)
What could be the reason? Should you need additional questions do not hesitate to ask.
The message is :
"An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog: SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS.
In u201CView logu201D I have:
ERROR 2009-07-09 00:00:35.671
FJS-00003 uncaught exception: nw.sdm.deploymentErrorWithLog:
SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)
ERROR 2009-07-09 00:00:37.375
FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was executed with status ERROR ( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog:
SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)).
The end section of u201CC:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.logu201D file is:
Jul 9, 2009 12:00:29 AM Info: Begin of log messages of the target system:
09/07/09 00:00:13 - ***********************************************************
09/07/09 00:00:15 - Start updating EAR file...
09/07/09 00:00:15 - start-up mode is lazy
09/07/09 00:00:15 - EAR file updated successfully for 63ms.
09/07/09 00:00:15 - Start deploying ...
09/07/09 00:00:15 - EAR file uploaded to server for 79ms.
09/07/09 00:00:29 - ERROR: NOT deployed. The Deploy Service returned the following error:
For detailed information see the log file of the Deploy Service.
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
at java.lang.Thread.run(Thread.java:534)
09/07/09 00:00:29 - ***********************************************************
Jul 9, 2009 12:00:29 AM Info: End of log messages of the target system.
Jul 9, 2009 12:00:29 AM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 9, 2009 12:00:29 AM Error: Aborted: development component 'caf/eu/gp/ws/msosrv'/'sap.com'/'MAIN_APL70VAL_C'/'963790'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
at java.lang.Thread.run(Thread.java:534)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jul 9, 2009 12:00:29 AM Info: Starting to save the repository
Jul 9, 2009 12:00:31 AM Info: Finished saving the repositoryHi
Check this [Link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc49a7fb-0701-0010-88bf-f45221a97d15?overridelayout=true]
btw what is the JDK version installed ?
Regards
Uday -
Hello!
A while back, I read that Blice (owner of http://its.alrig.ht/) had converted their init scripts to C to help the computer boot faster.
Unfortunately, Blice's site seems to have disappeared, which is a shame since I'd like to read some of the information on his webpage.
Anywho, my question is: anybody here have experience in converting startup scripts to C?
I've rewritten the apache, ssh, and postfix startup scripts so far. I've put the code up on GitHub at http://github.com/ColinJones/binary-startup
Any thoughts?I kind of like the idea myself. I would like to help with the development.
After rethinking a bit, I don't think the hardest part to develop is the actually code, the part that is going to be challenging is the build script. I mean, if it is going to be according to my original idea, the program code itself is going to be simple but to be able to have simple program code when parsing rc.conf it means that the build script has to be a bit more complex, otherwise it will mean that the program code itself has to parse rc.conf. Well, that means if the rc.conf is going to be parsed in the first place. I think it should be parsed during build time, it will be a bit like mkinitcpio but for the initscripts but that is of course in my opinion.
One of the first thing that needs to be done is probably do a prof-of-concept of a program + build script that can depending on the content of the config file build a program with different functionality. This is pretty much to simulate the DAEMONS array. A traditional way of doing this with statically linking is to including different files with the same interfaces and in case a functionality is not going to be present, use interface functions that are empty. This pretty much works when there isn't a lot of different functionality but I think there are to many possible DAEMONS to make this practical. I think a better way is to generate a config.h (or use a different name for the file) which contains a list of functional pointers to all the "modules" that should be included. In short, make the program aware of the function and include the file that contains the function to the linker and make the complete process dynamically.
I might look in this prof-of-concept during the weekend.
Last edited by PJ (2010-01-08 18:18:09) -
windows 8 installation gets stuck during create partition step in bootcamp. I tried to restart the bootcamp with same results. I have given it more than 6 hrs for last 3 times but I was able to go past this step previously where I got stuck during registering windows8.
Hi,
According to your description, it seems that your all Windows 8.1 computers connect to network via normal wireless network.
Did you have wireless router for them?
Please delete this adhoc, then check if these computer could connect to network.
If no, follow below guide to create and connect to adhoc :
Create adhoc in Windows 8.1
http://tipsandtricksforum.com/thread-210.html
connect to adhoc with Windows 8.1
http://social.technet.microsoft.com/Forums/windows/en-US/56ff83ff-1f15-4fc1-aa37-6651340d46fa/windows-81-connecting-to-ad-hoc-networks
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support -
[Solved] 'New' error messages during init after updating initscripts
After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1 -
0FI_AR_4 datasource is extraction 0 records during Init
Hi,
0FI_AR_4 datasource is extraction 0 records during Init. But if I run the Full-load I can get the data.
I am not sure whether our extractors are uncoupled.
Currently we are using GL and AP extractors as well.
We are on EEC6 and PI_BASIS 2005_1_700
There were no selection fields defined 0FI_AR_4 to restrict the Init on Fiscal year period/ Company code.
Not sure whether this note 551044 is applicable for the currect vesion of the component.
Reagards
Ajay
Points will be assigned to all answers.Hi Anil,
Thanks this is useful I have checked TPS31 Table the entry is maintained as described in your link.
this table doesn't have any entries in it BWOM_SETTINGS ( Do we have entries only after running delta infopackage?
When I tey to instral the datasource from RSA5
The get the following error message.
Units field HWAE2 for field H2STE of DataSource 0FI_AR_4 is hidden
Units field HWAE3 for field H3STE of DataSource 0FI_AR_4 is hidden
Units field HWAE2 for field ZLOCAL2 of DataSource 0FI_AR_4 is hidden
Units field HWAE3 for field ZLOCAL3 of DataSource 0FI_AR_4 is hidden
it will be great if you can help me out.
Regards
Ajay -
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
-
I'm packaging GNUstep... again (this time from CVS), and it requires a certain shell script to be sourced by every shell. That's easy enough for any user to do by modifying their .foorc and adding it in there, but I thought I would just throw a command in the postinstall to symlink the shell script to /etc/profile.d, so every login shell would automatically source it.
That's all fine and dandy, but xterms by default aren't login shells, so anybody using an xterm would find themselves without a working GNUstep build environment unless they set xterm to be a login shell in their .Xdefaults.
Change #1) Make xterms login shells by default in Arch's xfree86 distribution
Now that xterms are all login shells, and we can expect a user's shell to be a login shell by default, why not add scripts to profile.d for the various self-contained distributions that live in /opt (like gnome, kde, java, etc.) that automatically set up the paths for those binaries. At the moment, it appears you have to do this manually (I have not installed gnome or kde though, maybe those maintainers are doing this).
Change #2) Have packages that live in /opt add a script to profile.d setting up the paths and environment necessary to use those packages.
Thirdly, there's two daemons that need to be started for GNUstep when xfree86 starts (specifically gdnc and gpbs). Once again, this is something that can easily be done by a user editing their .Xsession, but I'd rather automate it. In the spirit of Arch's init script system, I think it would be wise to make an xinit.d directory (possibly in /etc, or more to the keeping of X's directory structure, in /etc/xinit.d), full of files that are run whenever X is started. These could be enabled and disabled in rc.conf just like init scripts in rc.d currently are.
Change #3) Add an xinit.d directory, in the spirit of rc.d and profile.d, full of items that are run whenever X is started.
Perhaps some of this has already been done, or perhaps there are other solutions. I just think these changes would be well in the spirit of Arch, and a boon to package maintainers.
Please give me your feedback either here or by mailing me at [email protected]
-- Michael Baehrsarah31 wrote:most if not all /opt package sets have profile.d scripts. some may not think so but one has to log out then in to enable them.
Good Looks like profile.d is being used for the right purpose. I should've expected it would be :oops:
Xentac wrote:Ok... but what happens if I'm running blackbox? I probably don't want gdnc and gpbs started when I start X, it'd make me cry. How would xinit.d help with that?
I don't see why it'd make you cry. Let me explain what gdnc and gpbs are:
GNUstep Distributed Notification Center
Handles messaging and notification between GNUstep applications
GNUstep Pasteboard Server
Handles rich copy and paste between GNUstep applications
Basically, none of these would impact whatever environment you'd be running, and only GNUstep apps would use them. In fact, you wouldn't even realize they were running as they'd just be sitting in the background like the valiant daemons they are, waiting to be called into service for the holy emperor GNUstep :twisted:
And in any case, with the whole xinit.d idea, you should be able to just disable it with a ! if you don't like it
I might as well throw in my last idea, which I forgot to write before.
I've noticed people complaining about Pacman upgrades wiping their pacman.conf, which is a problem if you're using several people's TURs and other external repositories like I am. Instead, I propose doing what APT has been doing in a recent version with its new sources.list.d layout... having one directory (pacman.repo.d or something of its ilk) storing files for each repository, and enabling and disabling them in pacman.conf the way you do in rc.conf (with a bang). This would be especially nice because somebody could install a package called, for example, "pacman-TUR", and have a repo file for each TUR, and then be able to enable or disable them. This package would be updated every time a new TUR was added or one was removed, thus enabling people to easily track the latest repository happenings, while still maintaining control over what repos they use.
Just a thought. -
It has been a while since I last posted, but I like arch.
My question is regarding the init scripts used in arch. Specifically, three common commands used in the init scipts, and they are "stat_fail","stat_done", and "add_daemon".
Could some refer me a wiki, webpage or man page for them, and yes I see there definitions in /etc/rc.d/functions file.For example in add_daemon:
add_daemon() {
[ -d /var/run/daemons ] || mkdir -p /var/run/daemons
touch /var/run/daemons/$1
What is the variable $1 refer to? I cannot see it defined anywhere else in the function or in the /etc/rc.d/functions script. Could it be the function referred to in which /etc/rc.d/"script" is run; "script" being whatever init service that is started and stopped, ie crond would be then touch /var/run/daemons/crond?
For what it is worth I am just trying to improve my shell scripting skills.
[/i] -
Error in OLTP 2.0 extractor during init. selection
During 0FIAR_O03 Init package load on PRD system I got thousands of errors with the same message:
*Error in OLTP 2.0 extractor during init. selection
What's wrong with these selections?
My data load is 3.x type
I'm loading into BI for SAP Netweaver 2004sI get error while trying INIT LOAD by RSA3:
"Could not determine BW release of logical system ''
I get no errors if i'm trying FULL LOAD -
Dhcpcd starting by wich init-script? [Solved]
I have static ip on both eth devices. These configured by netcfg: with if1 and if2 files in /etc/network.d/
here they are:
cat /etc/network.d/if1
CONNECTION='ethernet'
DESCRIPTION='ethernet connection to internet'
INTERFACE='eth0'
IP='static'
ADDR='10.85.231.106'
NETMASK='255.255.0.0'
GATEWAY='10.85.231.65'
DNS=('10.85.224.33')
cat /etc/network.d/if1
CONNECTION='ethernet'
DESCRIPTION='ethernet connection to localnet'
INTERFACE='eth1'
IP='static'
ADDR='192.168.225.222'
NETMASK='255.255.255.0'
But my resolve.conf sometimes is overwritten by dhcpcd.
in /etc/rc.conf I don't have any property connected with net set except HOSTNAME="ramazotty" and NETWORK_PERSIST="no"
my daemons are:
DAEMONS=(hwclock syslog-ng network net-profiles sshd samba xinetd @cupsd dbus @netfs crond)
Who in the world is starting dhcpcd?
p.s. The parent is process 1:
>ps -f `pidof dhcpcd`
UID PID PPID C STIME TTY STAT TIME CMD
root 497 1 0 15:09 ? Ss 0:00 dhcpcd -q
Last edited by roginovicci (2012-10-26 09:16:04)FYI you don't need the network init script when you're using netcfg.
This is not the answer you're looking for, just some useful information - unless you happen to be wrong about your rc.conf. -
Greetings,
I am trying to start synergyc as an init script so that it will work with slim, i copied the init script from the wiki, however, i get the error Fri Apr 13 10:16:02 2012: /usr/bin/xset: unable to open display ""
and the client never connects to the server.
thanks!
AdamIf you're using slim, just put it in your .xinitrc, it's much easier and tends not to throw as many errors (at least for me, anyway).
Maybe you are looking for
-
Is this possible. If so anyone want to tell me how to?
-
Hello, Iu2019m having problems re-assigning some activities. When i make a slight alteration to an existing activity I added my note and reassigned the activity to another user to raise collection but it is coming up with the red message when I click
-
Fail to check the VBR import option
I had this problem since iTunes previous version in my PC. I thought a newer version will solve it, but not even with iTunes 5.0, here is the problem: I try to set the CD import option to VBR, but I fail to really set this option, I have captured the
-
[EJB] Stateful session bean--- strange error
hi guys, here s my problem. i m trying to developp a stateful session bean with two ejbcreate method. one with parameters ( ejbcreate(int val)) and another one without (ejbcreate()). The client can call ejbcreate without any pbs. everything s allrigh
-
Sony Vaio VPCEB3F4E intermittent power on problems
Hi All Model above. Four years old, new SSD, everything else factory. Fan cleaned six months ago. Was working away one day and just turned off. Wouldn't boot back up. Tried to take out battery, hold power for 30 seconds, then boot didn't work (power