Stuck in boot loop tool dl image fail

Hi,
I was on my tablet and the battery was kind of low and it suddently powered off and started up again saying "tool DL image fail" and it keeps on swirching for black screen to this message. Does anyone know how to fix this,
Thanks.

Hi ALIKING
Can you enter the recovery mode(Vol+/- and Power)?
My guess is that you messed up the SP Drivers(that's why the flash tool doesn't work).I suppose you're running Windows 7.
I suggest uninstalling/reinstalling them(SP drivers)>follow the first part of message7 >
https://forums.lenovo.com/t5/Lenovo-Phones/Lenove-​S650-sound-issue/m-p/1413747/highlight/true#M3660  (''MT65xx Preloader'' will pop just for a short time so you'll have to be quick !)
If all works out try using the V3 Flash Tool.
Let me know how it goes.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • S650 tool dl image fail

    hello every body
    about 2 weeks ago i updated my s650 phone to 4.4.2 but because of battery drain problem , decided to flash my phone using flash tool to 4.2.2(official version S650_ROW_S116_140423)
    any way
    i downloaded it and all tools , started flash_tool.exe and setup every thing.same as toutarial below !
    ROM Installation:
    - Unpack the ROM
    - Unpack FlashTools, and Click on Flash_tool.exe
    - Select a the MT6582_Android_scatter.txt from the unpacked ROM
    - Wait file to be added into Flash Tool
    - Choose Option –> USB Model, click USB Model
       –> Choose Option –> DA DownLoad All –>Speed –> High Speed, click High Speed
    - Turn off your phone, remove the battery. (YES remove the battery)
    - "Press F9 (hit Download button) "    OR    "  if upgrade ROM Firmware->Upgrade "
    - Now connect your phone into the computer via USB data cable. 
    - The process will start and a red progress bar will appear –> purple–> yellow.
    - When done, Green circle pops up!!
    well i removed my battery , pressed F9 and connected my phone to pc after download process completed.
    as i did that , progress bar's color change to red but my pc freezed after while !
    and here is the problem.
    when i connect my phone to pc , i can see it in device manager that is connected but after 2 or 3 second it will be disapeared from device manager list. even when i use USBDeview it says it is not connect (but it is).
    i installed drivers too.
    so i guess in flash process my s650 disconnected and now when i want to power it on it says:
    tool dl image fail !
    what can i do?
    tank you

    Hi ALIKING
    Can you enter the recovery mode(Vol+/- and Power)?
    My guess is that you messed up the SP Drivers(that's why the flash tool doesn't work).I suppose you're running Windows 7.
    I suggest uninstalling/reinstalling them(SP drivers)>follow the first part of message7 >
    https://forums.lenovo.com/t5/Lenovo-Phones/Lenove-​S650-sound-issue/m-p/1413747/highlight/true#M3660  (''MT65xx Preloader'' will pop just for a short time so you'll have to be quick !)
    If all works out try using the V3 Flash Tool.
    Let me know how it goes.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Ipod touch 3g 64gb stuck in boot loop

    I have an ipod touch 3rd generation 64gb and its stuck in boot loop. how do i fix this?I

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My 5c is stuck in boot loop!

    I have only had the phone for 2 months and it is now stuck in boot loop. It is not been jailbroken at all. It first started yesterday and it just kept resetting itself every time i went to press something, so i left it over night and it has worked all day. As soon as i got home it started again, and now is stuck on the apple logo screen and the logo just fades in and out. I have tried everything to make it work, i've tried to put it into recovery mode, i've tried DFU. I've tried to connect it to itunes and it won't even be recognized as a device! Do i need to take it to an apple stockist? and does anyone know what could have caused this? I have only downloaded apps from the app store and don't think i've opened anything i shouldn't have, Thanks!

    If you have used DFU mode correctly and you cannot restore it the phone has a hardware problem.

  • P67A-GD65 (b2) stuck in boot loop after bad flash

    Hello,
    My mainboard is stuck, I can't open bios setup, (even tho it appears in f11 menu), and it won't boot on any device.
    I removed every hard drive and DVD, and tried to boot on DOS with a usb, but it won't even boot DOS, and no usb device appears in f11 menu (I tried every usb ports)
    And I can't enter bios setup (it just reboots)
    Initially I was trying to update my bios because some features I wanted were not in my old version. But I think Avast blocked the update program (E7681v43.exe opened in an usb) and when I restarted the bios flash failed, and my PC entered a boot loop. When I press f11, it's a new interface so some things in the bios updated.
    The only message I get when I put the E7681v43.exe and E7681IMS.430, or the files for v1j (oldest version before ivy bridge support) on a fat32 usb stick (tried formatted, and formated with Rufus), a red message appears saying "bios me updated ... file not found."
    Same thing if I try the MSIHQ flash utility, it doesn't work as my PC won't boot on the usb.
    I think my motherboard is bricked and the only solution is to send it to msi to get a working bios.
    My motherboard p67a gd65 (b2) (the one with bad sata 2 ports) and it doesn't appear in the product name list anymore to register it on msi...
    It was bought the on the 19th of January 2011, I hope I can still ask for msi for help!
    I'm looking forward to your opinions on my issue, and sorry for the long text.

    Quote from: Svet on 24-September-13, 17:50:38
    older b2 cannot be updated to the .4xx
    you have to send the mobo to be replaced with newer revision
    Thanks! do you know where can I ask for a replacement?
    I can't register it on msi, and when I ask a question and I give the serial number it just abords...
    I already send an email to msi France (I live in Belgium). But email are too slow usually.
    and what about the secondary bios, no way to repair primary bios with it?

  • 4404 WLC stuck in boot loop after upgrade

    In prepping for the upgrade to 4.1.185.0 I've got two controllers at different sites stuck in a boot loop after applying 4.0.219.0. Units will not even get to the <ESC> option menu.
    ANy ideas?

    Did you clear the configuration on the controller by using Option 5 in the boot menu? This will corrupt the boot image. You should not choose the clear config (option 5) from the boot menu on controllers running 3.2.78.0, 3.2.116.21, 3.2.150.6 or 3.2.150.10, 3.2.171.5 or 3.2.171.6, 4.0.155.5 or 4.0.179.8 and 4.0.179.11.

  • U410 stuck in boot loop

    Salutations everyone,
    Recently I purchased a u410 and it has been running great for a few weeks but this morning instead of waking up from hibernation like normal it seems to be stuck in a loop of displaying the lenovo logo then a blank screen with a few seconds on each. This has been running continously for hours while I try to run down battery in an attempt to reset. I have no bios access during the loop and it will not boot to any usb media. I am now wondering what I should do since it already has data migrated from my old machine and don't exactly want to start over. Is there anything that can be done other than returning it or sending it to lenovo support?
    Solved!
    Go to Solution.

    hi CurlyBrackets,
    Welcome to the Forums.
    If the reboot loop goes to the Lenovo logo where the white dots goes in circles, try to Interrupt the loading of Windows 8 to enter push-button reset mode (this is like a recovery environment to restore the pc fromr previous working state). To do this, hold the power button while on the Lenovo logo with the white dots going in circles. loading (you need to do this 2-3 times).
    If successful, it'll run Automatic Repair and if it fails, you'll see this screen:
    - Link to picture
    Click on Advanced Options and from there you can:
     1. Follow this guide to enable booting into Safe Mode, If everything's ok, try to restart the computer in normal mode and observe
     2. Do a System Restore to undo the changes
     3  Refresh your Windows 8 PC  or reset windows 8 (note that this will wipe the computer clean)
    If the problem remains and the steps above doesn't work, the HDD/SSD maybe showing signs of malfunction and you may need to send the unit for service.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Ipod Stuck in "boot Loop" and itunes says I'm not connected to the internet.

    Aright well I'm having a huge problem fixing my ipod.    Let's start at the beginning, i wanted to put new music onto my ipod but itunes wasn't detecting my ipod, it said i have to restore my ipod to factory settings, so i manually did it from the ipod it's self.   When it started to boot up again it just froze at the apple logo. and the loading wheel is stuck. after some research i found out that its called "boot loop" and the only way to fix this is to restore it from itunes itself.
    sounds simple enough,  so i go ahead and connect the ipod to itunes and try to restore it (via DFU mode) The restore wont happen because it says im not connected to the Internet, when clearly i am.      So in a nutshell..   in order to restore my ipod.. i need to get itunes to recognize that I'm connected to the Internet.
    I've done everything i can think of,   make sure my firewall isn't interfering and itunes is enabled.  The Internet proxy is what it needs to be.  Ive uninstalled and reinstalled itunes.   I actually chatted with a apple tech and he couldn't seem to help me out.
    If anyone can help me or has been in this situation and know's exactly what to do.   please let me know.. it would be greatly appericated

    That was the first thing I tried..what the site told me, but its still telling me I'm not connected to the internet when I am. Should I just delete everything by hand. Like I said I wanted to take it back and upgrade to the 80 gig ipod.

  • Incredible 2 Stuck at boot loop

    I have had this phone for only 2 months now and after removing several unused apps from the device it froze, so I removed the battery and tried to turn it back on. All it does is go through the booting loop and gets stuck at the droid red eye. Is this fixable or am I screwed???  

    Photohabit wrote:
    I have already done that. Not exactly the option most people want considering you lose all information. Time consuming and annoying to say the least.
    I know but there isn't many solutions for a bootloop situation, HTC doesn't have a clear cache option without voiding warrenty and Safe Mode only works if you can get past the boot logo..
    You can try pulling battery during booting up and then leave it out for a few minutes and then place battery back in and power up, this works sometimes..
    Also you can pull battery and with battery out press power button for 10 seconds and then put battery back in and power up, this forces a boot sometimes.

  • Issues 5.0.1 to 5.1 now stuck in boot loop

    I updated my iPhone 4 (at&t) from 5.0.1 to 5.1 via iTunes.  The phone stop in the middle of the update, restarted, and is not stuck in the boot loop.  Itunes is also not seeing the device which is the problem.  Please help

    Sorry I'm so late responding; I've been away.
    http://support.apple.com/kb/TS3694#error1611
    The error means that your antivirus or firewall is blocking the update process.

  • Droid Razr  Maxx stuck in boot loop

         A few days ago my droid razr max essentially died . I went to my local Verizon and purchased a new device but  I have
    been  unable to recover all of the photos and other data  from the old device. I've somehow managed to get the device to turn on but it is now stuck booting and will not load past the red eye. I am wondering if there is anything that I can do to get out of the boot loop without deleting or damaging the file saved to the device.

        Chela2004,
    Thank you for reaching out to us. I am sorry to hear that you are having trouble with your device not starting. We certainly want you to be able to retain the information on the phone. What exact information are you looking to extract? If you had an sd card in the old phone, pictures should be saved on their. As for contacts, those would either be saved with your google account you had with the phone, or with our application Backup Assistant plus.  You can try to run the phone in safe mode to bypass the red eye screen http://vz.to/159K41E. Please fill us in on how this works and what you are needing to move from phone to phone.
    Thank you,
    TonyG_VZW
    Follow us on Twitter @VZWSupport

  • IPod touch 2G stuck in boot loop

    My iPod touch 2G 16GB is stuck in a boot loop: I see the apple logo, after a while the screen goes blank, and then the apple logo appears again.
    How can I restore it now? Is there a way to do a "safe boot"? Resetting using hold and home for 10+ seconds yields the same result.
    As for how I got there: an app complained about being "out of space" yesterday and today, but checking the general information stated some 50 MB of free space. Later today Mail.app couldn't move a mail into the trash, and deleting mails in the trash was not possible, either. So I decided to reboot the iPod, and I'm stuck since.

    Many thanks for your help! I had to do it in a slightly different order (press hold and down for 20 secs, once the IPT tunrs off, let go of all buttons, then press home and keep it pressed, then connect to USB, keep home pressed until "connect to iTunes" appears), put your post was what put me on the right track!
    Many thanks again!
    Message was edited by: hdort

  • Xperia Z1 stuck in boot loop

    Hi there, I bought my brand new Xperia Z1 2 weeks ago, the first few days, it work perfect but some time have to restart because it keep losing mobile data, after a few day, it start to having boot loop. I tried everything that other post said like hard reset and leave it more than 30s, take out the sim card and sd card, but still, it can't start up without having boot loop. It just appear Sony logo, then Xperia, then restart, heat up and keep continue like that.
    I tried to factory reset and flash a new room with SUS, work perfectly again, after 3 days, the bootloop start happen again and the mobile data keep losing.  Any idea to fix this ? Thanks in advance

    Exact same symptoms; just after two days using my brand new Z1. Took it to the service and still waiting to hear form them for more than 10 days! In my case, when the phone rebooted, there was no background image at all; all I had was a pure black background (the widgets and all were still there and functional) and after about half a minute or so, the phone rebooted itself. If I let this go on for some time, the phone sometimes booted up normally. Funny that during the reboots, although my SIM was locked, I was never asked for a PIN.

  • K1 stuck in boot loop

    My K1 was working great until just recently, now when I turn the power on it is stuck in a startup boot loop.  It shows the lenovo logo, then the nvidia logo, then the startup music, and right after that it goes back to the nvidia logo and on and on and on.  I have left it in the loop for several hours and not change, it just drains the battery.
    I have a lot of videos and pictures on the tablet and they were not backed up (my bad).  Is there any way to retrieve the data on the tablet.  When I plug my laptop to the tablet via the USB cord, the laptop is not seeing the tablet (for obvious reasons).  Has anyone come across this before, is there a way to retrieve the data?

    hi Cyclepath,
    Sorry to hear about your trouble.
    For you to be able to detect the k1 tablet from the laptop, the tablet must first boot into the Android OS. Since the tablet is not doing that, there's no way to backup the data on the tablet unless you send it to a professional recovery company like Drive Savers
    What you can try is to:
    1. Restore your PC using this method
    2. After complete restore, connect your tablet to the PC using the USB cable and check if it's being detected under PC (see this guide)
    3. Try to run a data recovery software like EaseUS Data Recovery Wizard.to scan and retrieve the deleted files.
    Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Stuck in boot loop

    Hi, I am currently trying to fix my friends HTC Windows phone. Now I have at one point successfully got to the "!" screen but have had trouble getting pass the button sequence due to a battery issue. I have left it on the charger and just cant seem to get a charge to save my life. As far as I know there has never been any liquid damage nor has it been dropped, or thrown. The initial cause of the boot loop was a software download. What happend was my friend agreed to an OTA update of his phones system. He turned it off because he is impatient. Thus creating the issue. I believe I can fix it, but I now have doubts a bit because I can keep the phone charged long enough to start the factory reset. The charger indicated comes on, letting me know that its beginning to charge but then the phone dies due to the loop. I could use a bit of help on how to either shut it off for at least a few hours so it can charge or a way to let it charge while the boot continuously occurs.
    I tell you this is why I use Iphones. Androids, and windows phones have always brought me to the peak of frustration.
    I hope for a quick reply to this so I may return to him a working phone and make him a happier person.
    Thank you,
    TattooDaddy

    TattooDaddy18 wrote:
    Hi, I am currently trying to fix my friends HTC Windows phone. Now I have at one point successfully got to the "!" screen but have had trouble getting pass the button sequence due to a battery issue. I have left it on the charger and just cant seem to get a charge to save my life. As far as I know there has never been any liquid damage nor has it been dropped, or thrown. The initial cause of the boot loop was a software download. What happend was my friend agreed to an OTA update of his phones system. He turned it off because he is impatient. Thus creating the issue. I believe I can fix it, but I now have doubts a bit because I can keep the phone charged long enough to start the factory reset. The charger indicated comes on, letting me know that its beginning to charge but then the phone dies due to the loop. I could use a bit of help on how to either shut it off for at least a few hours so it can charge or a way to let it charge while the boot continuously occurs.
    I tell you this is why I use Iphones. Androids, and windows phones have always brought me to the peak of frustration.
    I hope for a quick reply to this so I may return to him a working phone and make him a happier person.
    Thank you,
    TattooDaddy
    you should post this in the windows phone area. you're dealing with a different operating system than the discussions above.

Maybe you are looking for

  • Java.lang.Exception: Overwriting file

    Hi All, We are having some trouble with one of our interfaces where XI creates files in append mode and gets the filename from the Payload. From last couple of days, we are getting the below error for some reason. There are no other extra config setu

  • OCR for numbers in a PDF

    Hi guys I've got a situation where I need to take numbers from a PDF file which is a previsouly scanned-in copy of an invoice. The PDF will be opened alongside a data entry form for the user to complete the form with information from the invoice. How

  • How can I force an "invisible" object to become "visible" when a numeric value is entered?

    So I'm trying to force an "invisible" subform to switch to "visible" when a numeric value greater than or equal to 22 is input into a numeric field. I can't get the following javascript code to work properly with any event. I've tried the change, cal

  • Import Format script required to work across multiple fields

    I am currently constructing an Import Format, and using datapump import scripts on several of the fields to implement specific logic based on the values present. For example: Function TBNetwork(strField, strRecord) If Left(strField, 1) = "N" Then TBN

  • Defining Leading within List

    Hello there, My question is related to formatting in the markup (xml). I need/want to have specific value for 'leading' inside the List element. As far as I understand and see in my text, 'leading' inside List element inherits paragraphSpaceAfter val