Stuck in Emergency Phone Call Mode

I just activated this Motorola RAZR M 4 hours a go & I am trying to learn how to use it. In the instructions I was seeing how to make the phone Silent then this happened. SOMEONE PLEASE HELP ME I NEED A PHONE THAT WORKS CORRECTLY FOR MY NEW JOB.

Here is the is the Global Help Site for the Razr M http://goo.gl/ruLD25   I will Post the Link below for the Full Online Manual
http://goo.gl/aC3eUU     
A couple things you can Try:.
Power Cycle the Phone  Press the Lower Volume + Power till Phone shuts off
Another you could try is Running a System Cache Clear.

Similar Messages

  • My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.

    My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
    Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo.

  • Iphone is disabled and old will allow emergency phone calls, how can I enter password

    iphone is disables and will only allow emergency phone calls, how can I enter a password to unlock it?

    Just restore it by putting the phone into DFU mode. You will loose every thing but it will be back to normal pal
    Press and hold power and home button together for 10 seconds by connecting it to cable, leave the power button but keep holding the home button for 30 seconds and it will go into DFU mode. Open Itunes and just perform a restore or update

  • IPhone 3GS gets stuck in "return to call" mode

    I made a call and had to look up a contacts phone number. While I was still on the phone I exited the phone App and went to contacts.
    Up at the top of the iPhone screen a green bar appears and says "touch to return to call". After i gave the caller the info they hung up. The green bar then did not go away. I tried touching it. Nothing. Made another call. Nothing. After a few mins of trying things I restarted the phone and it was gone.
    This also happened to me before. I think it was the same situation.
    Also I recently restored my iPhone on an unrelated problem.
    Any ideas?

    Same here.
    I made a call, while on the call received and read a text message, the caller hung up while I was in messaging. The green bar did not go away.
    Version 3.1 (7C144)
    Carrier AT&T 5.5
    Model Number MB715LL
    Modem Firmware 051107

  • Iphone stuck on emergency screen after update

    after the update it gets no signal and the only thing that i can do is make an emergency phone call. it wont let me reset or do anything its as if it erased all memory from the phone any suggestions

    It didn't activate after the update, so it is like a new phone. Reboot your computer, then follow the steps here:
    http://docs.info.apple.com/article.html?artnum=305797

  • HT201413 phone is stuck in emergency call only mode how do i fix this

    my phone is stuck in emergency call only mode

    Hi, bit75.  
    Thank you visiting Apple Support Communities.  
    This sounds like your device may be disabled and can only make emergency calls.  Here is the article that I would recommend going through if this is the case.  
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled
    http://support.apple.com/en-us/HT1212
    Cheers, 
    Jason H.  

  • My iphone is stuck in emergency call mode and itunes does not recognize my phone

    my iphone is stuck in emergency call mode and itunes does not recognize my phone

    NVM... broke down and called Apple Care.  Pressed on/off button and held it for a few minutes before pressing home button.  In recovery mode, but at least it is doing something now!

  • Phone is stuck in emergency mode?

    phone is stuck in emergency mode?

    See if the suggestions in this thread help:
    Re: GS111 stuck in "emergency call" screen"
    There also are similar threads under More Like This on the right-hand side of this page.

  • Droid Razr Max is stuck in Emergency call mode

    Last night my phone went into Emergency call mode.  I cannot get it out.  I have shut down the phone numerous times, waited and rebooted.  It is still stuck.  I have no idea what caused this.  Help please!

        @bbears4fun,
    You come to the right place for help! I definitely want you to be able to use your phone at all times.
    I see you found that you had accidentally set up the PIN for the phone. Were you able to turn off the PIN as Ann154 suggested http://vz.to/1kGlRcD? Keep me posted if you need further assistance.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • Itunes wont activate my iphone2G my phone is stuck at emergency call

    I restored my Iphone2G to factory settings, but itunes wont activate my phone. stuck at emergency call. i have a itune account already. But as i go along the activation itunes stopped at terms and conditions. pls help me out!

    I am not sure if you can use these modes because of the broken button, http://osxdaily.com/2011/01/08/iphone-recovery-mode/
    Take a look at this link, http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/

  • IPhone stuck in emergency mode

    Hello,
    I'm Shabnum and I've got a problem with my iPhone, I hope I can get some good advice from users within the Apple community. The problem is that my iPhone is stuck in emergency mode after I restored it. I restored it as I couldn't call anyone, I called Apple customer services and explained everything and they told me that I should restore the iPhone to its factory settings etc. Now, my iPhone has been stuck on the emergency mode and I can't access anything at all. I've made a backup of my iPhone via iTunes, is there any way to restore the iPhone with my backup which I created and is there any way to get out of emergecny mode? I've tried O2, Lebara and Orange sim cards but it won't let me activate my iPhone. It just states on iTunes "The carrier isn't supporter bla bla bla) I've done a lot of research on the problem and I haven't seen a single resolution, I hope that iPhone experts/professionals such as yourself can help provide a resolution.
    iPhone 3G.
    OS: I think it's 3.1.3
    Many thanks.

    It depends: if the phone is under warranty then they will help you unless they discover evidence of the phone being hacked - this will invalidate the warranty and you may be stuck. Non-warranty repairs are possible at a price - best to go and find it. I have no idea how much discretion they have at the store but you had better take every piece of evidence regarding your purchase and maybe they can exercise discretion if the situation turns out not to be straightforward.
    Only Apple can tell you for sure what the situation is. You may be able to recover a backup if they fix you up, but I wouldn't count on it - if it was made from a hacked phone then do not use it.

  • Stuck in emergency mode

    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    Christmas Eve we were on our way to visit family, came around a curve on the country road and found a van that had wrecked and flipped in the road in front of us.  I called 911 and then discovered I was stuck in emergency callout mode.  
    I knew Sprint would tell me I had to do a hard reset, so I quickly did a Sprite Backup, so I wouldn't lose my contacs.  My most recent backup was a month old.
    I performed a hard reset, which fixed the emergency call mode lockout.  However as soon as I restored my backup from the day, I went straight back into emergency backup mode. Repeated the process a couple times, googled around and found that the registry would have to be fixed.  Called sprint, they said I'd have to wait until after Christmas holiday was over and go into a store.  Googled some more and pieced toghether this answer:
    You need to download and install a free registry editor called:
    PHM Registry editor - you will find it at http://www.smartphonefreeware.org/download/phm-registry-editor-0.70
    Use the registry editor to follow the selections to get to the following paths and delete the value at the end (see details below to show you exactly how):
    (UNDER HKEY CURRENT USER) HKCU\ControlPanel\phone\emergencymodetimeout
    (UNDER HKEY LOCAL MACHINE)
    hklm\software\microsoft\today\items\"active call"\emergency_hwind
    This program is a bit tricky for a novice, especially.  When you open it, you'll see four HKEY listings: root, current users, local machine and users.  Click HKEY Current User then Control Panel, then Phone.  You'll see "State" but do not click on it... instead, click on Values, at the bottom left  of the screen.  Scroll down to "Emergency Mode Timeout" click on it and then click Menu and Delete at bottom right of screen.
    Duplicate the process for the Local Machine key.
    Once you've deleted these, remove your battery to do a soft reset.  
    You should be able to call after the reboot finishes.   Merry Christmas and best wishes!

  • IPhone Stuck on Emergency Mode after Update

    Need help on how to get my orginal iPhone 2G out of Emergency Mode only. Here's my issue and the solutions I've tried but so far none of it fixed my iPhone.
    Problem:
    I have an original iPhone (which I kept from 2007) and it has been working just fine as an iPod (no cell service anymore) since 2008 until I updated the firmware to 3.1.3 two days ago when I synced it with iTunes. After the firmware update, it remained stuck on Emergecy Call mode ony.  I know that the orginal iPhone can only be activated with iTunes, but iTunes doesnt seem to recognize it - not even an info about the device can be seen.  So, I tried to restore it through DFU mode, but even after re-installing the firmware, it remained stuck. I tried it both on my Sony VAIO with Win7 computer and iMac with Lion.
    Solutions I tried:
    1. Took my iPhone to Apple store - and they can't unlock it, they said their iTunes version doesn't support the device anymore.
    2. Took it to AT&T - they can't unlock it either even after putting in a SIM card that's active from one of their phones.
    I'm at a dead end on this somehow. Anyone who can give me a solution to this, I'd appreciate it a lot.
    Just FYI, I'm using iTunes beta (10.5.1.25) on Win 7 and iMac  Lion and non beta iTunes on my Mac Air with the same result.
    Will activating the iPhone back with service through AT&T solve this? This seems like it's the only way out? If I have to resort to that, I'll just have to cancel my service pretty much on the same day after activating it as soon as my phone unlocks. Somehow, I found it odd that Apple couldn't even unlock it. I don't remember reading anywhere that they will stop any kind of hardware support to their products.
    Thanks everyone!!! Hope someone can help me with this.

    It didn't activate after the update, so it is like a new phone. Reboot your computer, then follow the steps here:
    http://docs.info.apple.com/article.html?artnum=305797

  • Can not exit emergency call mode

    My phone seems to be stuck in emergency call mode.  How do I get out of it.  Turning off and on does not work  Thanks

    But did you Try a Soft Reset!   This is Different than just shutting it off..
    Soft Reset - DROID RAZR / RAZR MAXX by MOTOROLA  
    A soft reset is the most useful tool for resolving a variety of issues. In most cases, a soft reset will not affect data on the device, unless the battery is very low.
    Press and hold volume down key then press and hold the power button until the device powers off then release.
    P.C. b33

  • Cannot install IPhone 4 USB Driver, Phone stuck in "Connect to iTunes" mode

    Hi.
    I have the new Iphone 4 - for 2 days, and i can't install the Iphone 4 USB drivers. I tested the cable, the OS.. everything and now after reset i can't use my phone since its stuck in connect to Itunes mode.
    Every time i try to connect the USB, Windows recognize it as "unknown device" with (Code 43). If i try manually to select the Driver from common/apple/drivers the error is (Code 10).
    Tested the 2G and seems its connected without any problem and windows recognized the phone, but its not recognizing my Iphone 4 (tested on 2- Windows 7 OS), found some topic that Reset can help such issues, and now im stuck with Phone that have only emergency calls.
    Using latest iTunes , and ver 4.0.2
    Please help!!!!

    Same problem. This worked for me
    http://www.youtube.com/watch?v=nQnb4wIxNFg&feature=fvwrel

Maybe you are looking for

  • Section header with portrait and landscape view

    My iBook project is being created so that it is available in both portrait and landscape view. This has been a tricky process since alot of content was distored when I created the layout using landscape and then attempted to adjust the portrait view

  • Replace REUSE_ALV function module with use of OO ALV(obect oriented)

    HI, I m using function module 'REUSE_ALV_GRID_DISPLAY' to disply the report but now client want to use object oriented ALV instead of REUSE_ALV function pls help me.its very urgent thanks! Vipin pls find the code below. FORM f0001_get-select_data .  

  • Adobe Reader 9 - Windows XP Home

    How do I set Adobe Reader as the default?

  • Hide address bar from iexplorer

    hi, I made this code: String urlPath =   "http://maps.google.com/maps?q="+wdThis.wdGetContext().currentIndirizzoModificaElement().getGeocodifica();      IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();      wdComponentAPI.getComponentIn

  • Regions overlap wipes previous material

    Please do explain: how I can insert a new region into a track and not wipe overlapping material? GB does not "see" the beginnings to regions, and corresponding material is being destroyed. The region following the insertion is not automatically moved