Stuck in Halt state
I installed Solaris 8 on my lap top. As soon as it got done installing I typed in shutdown -h now. I am used to using Linux so I was sure if this was the appropriate command to shut down the system. Anyhow it shut down some stuff then said single user mode. now there is no prompt when I try to type a command i can type it and hit enter but it does nothing. I have tried every command from done to go and even shutdown again. If you have any suggestions please help.
Hi p.bevilacqua
I tried to do the same, but I couldnt load 3.2.1 image so I have loaded the image 3.1.1.
But it is not compatible with our CUCM 7.1. So I need to upgrade it to 3.2.1.
I have gone through the documents from Cisco and following it so I think it should be done by tomorrow morning.
Thanks for your reply.
Regards,
Amit.
Similar Messages
-
Workflow stuck in starting state after applying SharePoint 2010 CU December 2012
I have custom visual studio workflow which are associated with Custom content type. workflow gets triggered automatically when a file is uploaded to SharePoint. Everything was working fine till when i apply the following CU
http://blogs.msdn.com/b/joerg_sinemus/archive/2012/12/27/sharepoint-2010-and-december-2012-cu.aspx
After applying this my workflow get stuck in "Starting" state.
No error were logged in 14 hive logs.
Thanks in Advance!It took me a while but I came up with a work around. There is a PowerShell script below that can be used to trigger the workflow. Hopefully this will hold all of us over until the official fix arrives.
First remove the auto start on change or new from the affected workflow
Edit the script below to match your environment
Add the script to Windows task scheduler with the PowerShell.exe in the command line
This assumes PowerShell.exe is in the path
Then add the full path and script name in the add arguements text box
Script:
#The purpose of this script is to start the SPD workflow with the windows task scheduler for a trigger
#This should avoid the check in-out issue caused by the December 2012 SP CU patch
#This needs to be run on an account with membership in the farm administration group for SharePoint and Shell in SQL
#You can use a find and replace to replace the server and other names with your actual names
#There are no status messages being used since this will be a scheduled task in the Windows task scheduler
#Add SharePoint modules and create variable space
add-pssnapin microsoft.sharepoint.powershell
start-spassignment -global
#Open the web site, list and the workflow
$site=get-spsite %site url%"
$web=get-spweb %Web url%
#Open the %affected% library or list and workflow association
$%affected%=$web.getlist("%affected%")
$manager=$site.workflowmanager
$culture=[system.globalization.cultureinfo]::currentculture
$wfname="%affected workflow name"
$association=$%affected%.workflowassociations.getassociationbyname($wfname,$culture)
$data=$association.associationdata
$wfrunoption=[microsoft.sharepoint.workflow.spworkflowrunoptions]::synchronous
#Start workflow
foreach ($item in $%affected%.items) {
$site.workflowmanager.startworkflow($item,$association,$data,$wfrunoption)
stop-spassignment -global -
Agent get stucked in Reserved State
HI CUCCE gurus,
Need assistance on this issue. In our remote office, our Sales Team has a linegroup setup, the Sales extensions are part of the linegroup and at the same time its their ACD line when they logged in to Cisco Agent Desktop.
The issue is, when they got a call from the linegroup their CAD state change to "Reserved" and it stuck from that state and nothing they can do to change the state but to logoff, close the apps and log back in.
I enabled debug on once of the Sales CAD (see attached output).
Any troubleshooting tips that you can advise or detailed steps to check from our system.
Our CAD is 7.X
Our CUCCE is 7.X
Our CUCM 7.X
Thank you.Hi Jhun,
Agent stuck in reserved state it means, the ICM has reserved the agent, but the call is not getting delivered to the agent extension.
If you are using SIP trunk, you would probably need to check the CSS and Partitions over the trunk. Also, any recent changes made on the CSS of the SIP trunk you would need to reset the SIP trunk.
The CSS on the SIP trunk should contain the partition of the phone.
Also, you would need to check on the Agent targetting rule in the config manager of the ICM. The agent extensions should be added to the Agent targetting rule
Hope this helps!!!
Cheers,
Dass
Please rate useful posts -
I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?
LOL.. don't switch off the TC.. this is fairly typical behaviour..
Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
Are you running latest firmware for your TC?
What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
Get one bigger USB hard disk instead of 3 smaller ones. -
Content Switching Module (CSM): Sessions stuck in closing state
Hi guys,
I'm troubleshooting a CSM with 4.3(1).
We migrated a real server from windows to linux, since then lot's of sessions stuck in closing state until the idle timer expires.
I traced the traffic from the client to the csm and from the csm to the real server what I saw is the following behaviour at the end of a session:
windows real server: client sends FIN -> real server acks the FIN -> real server sends FIN -> client sends RST -> real server sends RST -> CSM deletes session from session table
The linux real server mostly behaves like the windows real server but sometimes behaves as follows:
client sends FIN -> real server sends FIN, but does not ack the FIN sequence number of the client -> real server sends RST -> client sends RST -> CSM does not delete session from session table, it stucks in closing state
Does anybody know how I can solve this problem of half-closed sessions other than decreasing the idle timeout?
Is it possible to configure CSM to close and delete sessions not only on FIN-ACK packets but also on RST packets?
Or to use a different fast idle timeout when sessions are half-closed?
Many thanks in advance,
ThorstenHi Fabrizio,
CSM_FAST_FIN_TIMEOUT is already set to 10 seconds.
What I found out while testing is that CSM_FAST_FIN_TIMEOUT works with configurations where idle timeout is configured > 0.
But when idle timeout is configured to 0 (what meas no idle timeout) the csm seems not to use CSM_FAST_FIN_TIMEOUT: Half closed sessions will stuck in closing state.
Any idea why cms behaves this way?
Regards,
Thorsten -
Workflows stuck in "Starting" state.
Workflows have been running fine for awhile. All workflows are currently stuck in a "Starting" state. Was finally able to capture this in ULS
03/20/2014 11:58:23.46 w3wp.exe (0x15AC) 0x2A98 SharePoint Foundation
Workflow Infrastructure 72fv Unexpected AutoStart Workflow: System.ArgumentException: Value does not fall within the expected range. at Microsoft.SharePoint.Workflow.SPWorkflowActivationProperties..ctor(SPWorkflow
workflow, String initiationData, Object context) at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflowElev(Object context, SPWorkflowAssociation association, DateTime elevationTimeUtc, SPWorkflowEvent startEvent, SPWorkflowRunOptions
runOptions) at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite superUserSite, SPWeb superUserWeb)
Any ideas?
TIAHi Milo,
Please check whether you have installed any CUs for SharePoint 2010.
Please install June 2013 CU or higher for SharePoint 2010, compare the result.
Here are some similar posts for you to take a look at:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
[SOLVED] Mailbox import requests stuck in 'queued' state
We have a small Exchange 2013 environment with one server having all roles. I try to import archive mailboxes from an Exchange 2010 environment. It has worked quite well for a while. However, all import requests are now 'stuck' in 'queued' state. Restart
of Replication service, transport service and even server reboot didn't help.
When I run
get-mailboximportrequest | Get-MailboxImportRequestStatistics -Includereport | fl
I observe that PositionInQueue value tells me that there are 85 import requests waiting :
ItemsTransferred :
PercentComplete : 0
CompletedRequestAgeLimit : 30.00:00:00
PositionInQueue : 85/90 (Position/Queue Length)
InternalFlags : None
FailureCode :
There should be no requests waiting as I removed all requests in advance before I issued new import requests:
get-mailboximportrequest | Remove-MailboxImportRequest
How can I really reset an import queue by zeroing PositionInQueue ?
Any suggestions/tips?Hi,
Glade to hear the good news. Thanks for your update.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
Ciscoworks daemon manager stuck at Stopping state
I am working on LMS 3.2 . Tried to stop the daemon service with " net stop crmdmgtd ". It stuck on stopping state since few hours now. I can still open the application. Need a suggestion to terminate the previous command and restart the
daemon service.You should have dmgtd.exe process in Task Manager stuck.
Although you can kill it directly and then try the stop command once again before starting. But to be sure if any process in not stuck, best way would be to reboot the server once. -
VM got stuck in "stopping" state, and cannot be stopped
Dear all,
I am using Oracle VM 3.2.2.
One of my VM got stuck in "stopping" state, and cannot be stopped.
How can I troubleshoot this problem...Q: Is the VM still running, i.e. can you ssh to the VM?
Q: Find the server where the VM is running, and restart the ovs-agent, i.e. "service ovs-agent restart". Did this help, or is the agent crashed, any zombies?
Possible root cause: These type of errors are typically ovs-agent bugs. First update oracle vm manager to the 3.2.4 release, not 3.2.6. Next update the dom0s to 3.2.4, not 3.2.6. You may need to setup a ULN 3.2.4 yum repo to update the dom0s. As you can see in these forms, 3.2.6 is may not ready for prime time, stick with 3.2.4, is stable. -
Azure Cloud Service Stuck in "Stopping" state for a long time (12 hours)
Does anyone have suggestions what to do with the issue I have. I tried to stop my Cloud Service the service is now basically stuck in "Stopping" State and been there over 12 hours. In my Cloud service there is 16 Virtual Machines I am using in
testing.
I tried to start Cloud Service but it also failed with error "Could not start the virtual machine deployment.".
Is there something I could do or some way to get Microsoft Support (without paying extra)? I have "Visual Studio Premium with MSDN" so i have no other support but billing from Microsoft :(Managed to find the solution. I stopped and deallocated all the Virtual Machines. After that the Cloud Service status changed to stopped state. After that it was possible to start the Cloud Service again.
-
SQL Azure Data Sync stuck in Processing State since 5 Sep 2014
Hi,
I've a sync group stuck in "processing" state since 5 Sep 2014, have tried to restart the client PC, restarted the sync service and also tried to regenerate the sync agent key, but still in vain. Would anyone please help me to figure it out what's
the problem? As I have many sync groups running without any problem for more than a year and encountered this problem recently (in this 3 months).
Here's the sync group details:
Sync Group Name
ew_sync_a054
Status
Processing
LAST SYNC
9/5/2014 5:57:35 PM
Sync Group ID
94f34eaa-cf1c-4af0-950e-7aa565ccc781_East Asia
Location
East Asia
Subscription Name
Solo Customer Batch 2
Subscription ID
cda925fa-16c4-44b6-b3dc-8fc0cb82ad07
Conflict Resolution
Client Wins
Thanks for your help.
Best regards,
Michael YungHi Bowen,
I've checked the local agent has been offline at 2014/09/05 18:00:00 UTC+8, as the shop close every night and they will shut down the computer, but they've turned on the computer in next day morning, and they keep turning that off at night, turn
back on at next morning.
I've checked the agent was online during that "stuck" period when the computer was turned on, as I could click the "PING SYNC SERVICE" and it reported it could reach the sync server, and I could also view from the portal that the agent
was online, just the sync group stuck in the "processing" status.
Best regards,
Michael Yung -
SQL Azure Data Sync stuck in Processing State since 14 Sep 2014
Hi,
I've a sync group stuck in "processing" state since 14 Sep 2014, have tried to restart the client PC, restarted the sync service and also tried to regenerate the sync agent key, but still in vain. Would anyone please help me to figure it out what's
the problem? This problem happened across my sync group very frequent recently (they're located in different physical locations), but still no workaround or the root cause :(
Here's the sync group details:
Sync group name: ew_sync_a069
Status
Processing
LAST SYNC
9/14/2014 11:11:22 PM
Sync Group ID
4a604aad-e318-469d-adde-9ed4e1d52ead_East Asia
Location
East Asia
Subscription Name
Solo Customer Batch 3
Subscription ID
a68811f9-f82a-4e7c-b93c-d1bee226f84b
Conflict Resolution
Client Wins
Thanks
for your help.
Best regards,
Michael YungAs the client need the sync to be fixed ASAP, cannot wait for the answer / help, I've removed the sync agent, compare the data (what data need to download from Azure to client, what data need to upload from client to Azure) and recreate back the sync group.
Hi Micheal,
Is this the workaround in your scenario? Since the Azure SQL Data Sync failed, the Microsoft support engineer will help to solve the problem from backend based on your subscription ID and Sync Group ID. Sometime delay might be expected. Your patience is
greatly appreciated. Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support -
SQL Azure Data Sync stuck in Processing State since 16 Aug 2014
Hi,
I've a sync group stuck in "processing" state since 16 Aug 2014, have tried to restart the client PC, restarted the sync service and also tried to regenerate the sync agent key, but still in vain. Would anyone please help me to figure it out what's
the problem? As I have many sync groups running without any problem for more than a year and encountered this problem recently (in this 3 months).
Here's the sync group details:
Sync Group Name
ew_sync_a037
LAST SYNC
8/16/2014 9:17:37 PM
Sync Group ID
15a3a3c5-f867-4ba4-b7af-92fb5c8d36a6_East Asia
Location
East Asia
Subscription Name
Pay-As-You-Go
Subscription ID
f979186d-23f7-45e3-8d5e-c14c89c56a7f
Conflict Resolution
Client Wins
Thanks for your help.
Best regards,
Michael YungHi Michael,
Thanks for you posting the subscription ID and Sync Group ID. The Microsoft support engineer will help to solve the problem from backend. Sometime delay might be expected. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support -
Webengine stuck in RUNNING state - JavaFX 8.0.0
I am using jdk 1.8 and along with it the latest javaFX 8.0.0. I moved to the latest java FX as i was facing issues with custom fonts loading with the previous version of java FX with JDK 1.7. However with the latest version, my webengine is stuck in RUNNING state and the url page is never getting loaded. Anybody faced the same issue with javaFX. I need this to be fixed for my app to up and running.
ThanksHi ...
Restart your router then follow the instructions here > iOS: Unable to update or restore -
HT201269 my new 5s was stuck in recovery state & now dead
hi can anyone help me?
my 5s is stuck in recovery state. Now its gone off it seems and doesnt come on. It's dead.You need to upgrade your computer's OS to at least OS X 10.5.8 and use iTunes 10.5.
With OS X 10.4.11, you cannot upgrade beyond iTunes 9.2.1.
OS X upgrades from 10.4.XX to 10.5.XX require purchasing a DVD with the new OS. If your laptop has an intel processor, you can upgrade directly to OS X 10.6 for $29.
Take your laptop to the store with your new phone and ask them what your best options are.
Maybe you are looking for
-
Connecting a NAS to Home Hub 4
I have connected mac computer directly to Home hub 4 with success and also a Develo Home Plug with success. I have got all of the wi-fi to work but I cannot get my Buffalo terrastion to be even seen. I have tried Buffalo to Hub direct via ethernet. B
-
I figure this happened when my kitties walked on my keyboard. GAH! I used to have a "toolbar" at the bottom of my FF screen. It's where some of my addon icons lived like No Script. It was also where I had the drop up menu for resizing text on the scr
-
Send IDOC to flat file without mapping will it possible???
Hello everybody, Iwould like to know, We have middleware tech is Webmethods. I want to send IDOC from SAP R/3 to flat file in Legacy system. how to do that? What willbe the structure of Flat file.
-
Pricing condition deleted in PO
Hi Experts, I created a PO and added Freight condtion to the PO. After creating the PO i realized that the plant in the PO is a wrong one. So i changed the plant in the PO . But after changing the plant i see that the freight condition is deleted in
-
I do the step by step and "terms and conditions" never appear, some one help!!!!