Stuck in LCM Migration 11.1.1.3

In the middle of an LCM migration of a 11.1.1.3 Planning application. I did a successful export of all Planning artifacts using username "user1". I then went to import (via ftp) the export folders into the destination environment and ran into the following issues:
On the destination environment there is no "user1" configured in Shared Services, nor do I have access to a user with provisioning roles. Consequently, there is also no user1@NativeDirectory folder in the Hyperion\common\import_export directory.
I created a user1@NativeDirectory folder in the Hyperion\common\import_export directory (was not sure if it would work but figured I'd try) and copied the LCM source export files there. When I then went to shared services, I don't see anything under file system and am therefore unable to proceed with the migration.
Any insights as to how to solve my issue?

John,
It's working now - in admin@NativeDirectory, there needs to be a space between Native and Directory. That is what I was missing. Thanks - marking your posts helpful as usual :)
Also not an issue - but I had a question: I have two shell applications on the destination environment, and I want to import to one of them. I am reviewing the steps where I define the import - I can't seem to find where i specify WHICH of the 2 destination applications I am importing to. Do the source and target applications need to be the same name ?

Similar Messages

LCM Migration No Longer Working

LCM migrations(Hyperion v11.1.2) are getting "stuck" at the point where Migration Status Report shows "Status = In Progress" but they do not complete. This used to work but no longer works. No known changes to the environment or setup
1) Have tried running using various logins, but same result. Occurs regardless of migration attempted (Shared Services, Essbase, Planning artifacts, etc)
2) No files are sent to the "\IMPORT\EXPORT\" directory on the Foundation server
3) There are xml files created in the MSR (Migration Status Report" directory. They point to a problem with the password for "Credentials user="CSSTOKEN" (shown below)
Any suggestions on what may be occurring and how to get LCM working?
- <Package name="web-migration" description="Migrating Product to File System">
<Credentials user="CSSTOKEN"
password="nyv7P/M9W2sXpnbeHBSiaSo4Y7HGikazXxkut77UafG4CPgXrxFbNCXQdAlqmR8ciDMVkOaDEdWf sbs5tdpy0z5fVs9avpihHjlUCfjzTPaBlevUtEkQpciMZ6Sqs1F3hxYdGh7NdIP9bHaIBeTQXnct V4dYwGLluvchN/r5zYGD4p4rdJsWbPDbZAUStFCpg+KeK3SbFmzsHRCrDp7Mv4SNI9HSk/ITUexU ==" />
<LOCALE>en_US</LOCALE>
- <Connections>
<ConnectionInfo name="MyHSS-Connection1" type="HSS" description="Hyperion Shared Service connection" user="CSSTOKEN" password="nyv7P/M9W2sXpnbeHBSiaSo4Y7HGikazXxkut77UafG4CPgXrxFbNCXQdAlqmR8ciDMVkOaDEdWf sbs5tdpy0z5fVs9avpihHjlUCfjzTPaBlevUtEkQpciMZ6Sqs1F3hxYdGh7NdIP9bHaIBeTQXnct V4dYwGLluvchN/r5zYGD4p4rdJsWbPDbZAUStFCpg+KeK3SbFmzsHRCrDp7Mv4SNI9HSk/ITUexU ==" />
<ConnectionInfo name="FileSystem-Connection1" type="FileSystem" description="File system connection" HSSConnection="MyHSS-Connection1" filePath="/test_admin" />
<ConnectionInfo name="AppConnection2" type="Application" product="ESBAPP" project="EssbaseCluster-1" application="TestRptg" HSSConnection="MyHSS-Connection1" description="Source Application" />

Could it be that the username that you are using for the migration doesn't have all of the rights it needs for the app you are trying to migrate?
IOW, have you tried it with just plain admin instead of test_admin?
Regards,
Cameron Lackpour

Is it possible to do a LCM migration between 11.1.1.2 and 11.1.1.4 of epm?

Hello all,
Is it possible to do a LCM migration between 11.1.1.2 and 11.1.1.4 of epm?
Thanks.

Like I said, I haven't (literally) touched the product formerly known as Analyzer since 2001, but what I recall was creating a connection to a database and then building reports with that connection. I am going to guess that WA hasn't changed that much.
The error message you noted:
org.springframework.dao.DataAccessException : error creating essbase Database object.Would that error exist if that database connection (okay, I am probably using the wrong terminology, but you get the idea) existed on the target before the migration.
It might also be worth checking Oracle Support to see if this is a known issue.
Regards,
Cameron Lackpour
Edited by: CL on Dec 4, 2012 12:00 PM
P.S. Useless trivia -- I attended training at WiredForOlap's "headquarters" which I was 100% sure was a former home dentist office converted to a software company headquarters. It has to be said that their model worked as that had to be some time in the mid 1990s.

Automating LCM Migration

We are running Planning 11.1.2.3 and would like to keep the applications in our PROD & UAT environments in sync. Currently perform LCM migrations manually once or twice a month; We export the PROD artifacts and import on DEV. However, we were wondering - is there a way of automating the migration? I did not see any functionality provided by EPM itself. If anybody has achieved any alternate methods to do this, or if there is somehow a functionality within EPM that I have not seen, please do provide input.
Thanks!

Hi
I hope this helps
http://www.adistrategies.com/resources/knowledge-base/id0127-lcm-command-line-utility-to-automate-the-shared-servicesplanning-application-backup/
LCM backup automation
Thanks
Anjum

LCM migration issue

Hi iam trying to import secuirty for one user from LCM migrated file system.
i am facing the below error.
Error in migrating artifact, "/Security/Access Permissions/Users".
Errors occured during syncrhonization: [com.hyperion.planning.HspRuntimeException: An error accurred while adding user to Essbase. Please check the Essbase log for details.]
Errors occured during syncrhonization: [com.hyperion.planning.HspRuntimeException: An error accurred while adding user to Essbase. Please check the Essbase log for details.]
can anyone assist?

Did you check the Essbase logs?
Are those users present in this environment?
Regards
Celvin
http://www.orahyplabs.com

LCM Migration validation checklist

Hello there,
does anyone have an LCM Migration checklist used to validate that the migration was successfull ? also lists any common errors to look for that the LCM console would not report on ? do you have a list of these potential migration errors that are not usually reported or flagged by LCM?
Thx

I wouldn't trust status field in LCM progress report. Sometimes it says import was successful, but it actualy hasn't been. I'd pay special attention to BRs (in my experience, delete them on the target before import), Task Lists (getting "Success", but in target app they are not correct, form links are usually missing), Planning Units (annotations and logs don't always go over), etc. Get the idea? Be careful.
smilo

LCM migration hung up

How can we cancel an LCM migration job that is hung? Running Planning Classic 11.1.1.3 and we've successfully used LCM several times for import to prod.
Now we were running an export of all objects in a Prod Planning app to a file to enable moving selected dimensions to the test environment.
The job won't finish.

If it is a pure planning application then restarting planning may release the connection, if not then it would shared services that would need restarting.
Cheers
John
http://john-goodwin.blogspot.com/

Planning units LCM migration error

our LCM migration 11.1.3 from one app to another (same SS environment) have failed on the planning units - any ideas on why and how to resolve this would be appreciated thx

hi Nick
here is a sample from the LCM log ...
2011-01-22 10:26:55,183 DEBUG - BEGIN : PackageHandler.initialize for package file - E:/Hyperion/common/import_export/msr/PKG_219.xml
2011-01-22 10:26:55,183 INFO - Executing package file - E:/Hyperion/common/import_export/msr/PKG_219.xml
2011-01-22 10:26:56,012 DEBUG - Encrypting password before saving in the Package File
2011-01-22 10:26:56,012 DEBUG - Package file details -
2011-01-22 10:26:56,012 DEBUG - User name - CSSTOKEN
2011-01-22 10:26:56,012 DEBUG - Connection details -
2011-01-22 10:26:56,012 DEBUG - Connection#0-
2011-01-22 10:26:56,012 DEBUG - Connection type-HSS
2011-01-22 10:26:56,012 INFO - Reading HSS URL from command line
2011-01-22 10:26:56,012 INFO - HSS URL could not be read from command line. Reading from registry.
2011-01-22 10:26:56,012 DEBUG - Getting HSS URL from Registry
2011-01-22 10:26:57,387 DEBUG - 20:3502:Missing file HSSLogger.properties.
2011-01-22 10:26:58,527 INFO - Audit Client has been created for the server http://server:28080/interop/Audit
2011-01-22 10:26:58,621 DEBUG - Validated LCM manager ...
2011-01-22 10:26:58,652 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:26:58,683 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:26:58,683 DEBUG - PROCESSING REQUEST beginMigrationReport
2011-01-22 10:26:59,558 DEBUG - Connection#1-
2011-01-22 10:26:59,558 DEBUG - Connection type-Application
2011-01-22 10:26:59,558 DEBUG - Connection#2-
2011-01-22 10:26:59,558 DEBUG - Connection type-FileSystem
2011-01-22 10:26:59,558 DEBUG - Connection type-Application
2011-01-22 10:27:00,324 INFO - Client Enable Status false
2011-01-22 10:27:02,355 INFO - Client Enable Status false
2011-01-22 10:27:23,355 DEBUG - Getting LCM callback info from Registry for product: HP
2011-01-22 10:27:24,011 DEBUG - LCM callback : http://server:8300/HyperionPlanning/servlet/HspLCMServlet
2011-01-22 10:27:24,871 DEBUG - Application name -newapp
2011-01-22 10:27:24,871 DEBUG - Product name -HP
2011-01-22 10:27:24,871 DEBUG - Project name -Planning
2011-01-22 10:27:24,871 DEBUG - Connection name -AppConnection1
2011-01-22 10:27:24,871 DEBUG - Connection type-FileSystem
2011-01-22 10:27:24,886 DEBUG - Connection name -FileSystem-Connection2
2011-01-22 10:27:24,886 DEBUG - File path -/PlnUnits
2011-01-22 10:27:24,886 DEBUG - Task details -
2011-01-22 10:27:24,917 DEBUG - Processing source options -
2011-01-22 10:27:24,917 DEBUG - Processing source filters -
2011-01-22 10:27:24,917 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:27:24,917 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:27:24,917 DEBUG - PROCESSING REQUEST initializeMigrationTask
2011-01-22 10:27:24,933 DEBUG - path - /Relational Data,type=,pattern - *,recursive - true,modifiedBy - null,startDate - null,endDate - null
2011-01-22 10:27:24,933 DEBUG - Processing target options -
2011-01-22 10:27:24,933 DEBUG - Completed processing Task#1-
2011-01-22 10:27:24,933 DEBUG - END : PackageHandler.initialize()
2011-01-22 10:27:25,324 INFO - Client Enable Status false
2011-01-22 10:27:25,324 INFO - Audit Client has been created for the server http://server:28080/interop/Audit
2011-01-22 10:27:25,324 DEBUG - BEGIN : TaskHandler.run for thread with identity
2011-01-22 10:27:25,324 DEBUG - COMPLETED VALIDATING ALL TASKS !
2011-01-22 10:27:25,324 DEBUG - Running tasks for batch (sequence id) #1
2011-01-22 10:27:25,324 DEBUG - MIGRATING ARTIFACTS FROM "/PlnUnits" TO "Planning/newapp"
2011-01-22 10:27:25,339 DEBUG - Processing task 1...
2011-01-22 10:27:26,042 DEBUG - BEGIN : TaskHandler.getExecutor
2011-01-22 10:27:26,042 DEBUG - END : TaskHandler.getExecutor
2011-01-22 10:27:26,058 DEBUG - AWAITING FOR 1 PERMITS
2011-01-22 10:27:26,058 DEBUG - AWAITING FOR 1 PERMITS
2011-01-22 10:27:26,058 DEBUG - Migrating 1 artifacts in group for thread -1
2011-01-22 10:27:26,167 DEBUG - ZIPPING ARTIFACT E:\Hyperion\common\import_export\lcmadmin@Native Directory\PlnUnits\resource\Relational Data\Planning Units.xml
2011-01-22 10:27:54,667 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:27:54,667 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - PROCESSING REQUEST KeepAlive
2011-01-22 10:23:43,494 ERROR - error /Relational Data/Planning Units - Import failed. Total - 3000, Success - 1032
2011-01-22 10:23:43,494 DEBUG - LAST IMPORTED GROUP EVENT
2011-01-22 10:23:43,494 DEBUG - LAST EXPORTED GROUP EVENT
2011-01-22 10:23:43,494 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - PROCESSING REQUEST updateMigrationInfo
2011-01-22 10:23:43,494 DEBUG - COMPLETED PROCESSING SEQUENCED TASKS !
2011-01-22 10:23:43,494 DEBUG - AWAITING FOR 0 PERMITS
2011-01-22 10:23:43,494 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:43,838 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:43,838 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:43,838 DEBUG - PROCESSING REQUEST postFinalStatus
2011-01-22 10:23:44,056 DEBUG - Writing Migration Status to Shared Services ...
2011-01-22 10:23:44,056 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:44,056 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:44,056 DEBUG - PROCESSING REQUEST endMigrationTask
2011-01-22 10:23:44,291 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:44,291 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:44,291 DEBUG - PROCESSING REQUEST endMigrationReport
2011-01-22 10:23:44,603 DEBUG - MSR STATUS MESSAGES FLUSH SUCCESSFUL
2011-01-22 10:23:44,603 DEBUG - COMPLETED PROCESSING. CLU EXITED !
2011-01-22 10:23:44,603 DEBUG - PROCESSING COMPLETED !
Please advise ! thx

LCM migration error - Planning units

our LCM migration 11.1.1.3 from one app to another (same SS environment) have failed on the planning units - any ideas on why and how to resolve this would be appreciated thx

Hi Bob,
the account has admin rights to the source and target Planning apps ...
Have you tried to export the Planning Units to a file to see if it can do that successfully? yes and it has failed - only 50% out of 3000 units were exported
here is a sample from the LCM log ...
2011-01-22 10:26:55,183 DEBUG - BEGIN : PackageHandler.initialize for package file - E:/Hyperion/common/import_export/msr/PKG_219.xml
2011-01-22 10:26:55,183 INFO - Executing package file - E:/Hyperion/common/import_export/msr/PKG_219.xml
2011-01-22 10:26:56,012 DEBUG - Encrypting password before saving in the Package File
2011-01-22 10:26:56,012 DEBUG - Package file details -
2011-01-22 10:26:56,012 DEBUG -      User name - CSSTOKEN
2011-01-22 10:26:56,012 DEBUG -      Connection details -
2011-01-22 10:26:56,012 DEBUG -           Connection#0-
2011-01-22 10:26:56,012 DEBUG -                Connection type-HSS
2011-01-22 10:26:56,012 INFO - Reading HSS URL from command line
2011-01-22 10:26:56,012 INFO - HSS URL could not be read from command line. Reading from registry.
2011-01-22 10:26:56,012 DEBUG - Getting HSS URL from Registry
2011-01-22 10:26:57,387 DEBUG - 20:3502:Missing file HSSLogger.properties.
2011-01-22 10:26:58,527 INFO - Audit Client has been created for the server http://server:28080/interop/Audit
2011-01-22 10:26:58,621 DEBUG -                Validated LCM manager ...
2011-01-22 10:26:58,652 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:26:58,683 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:26:58,683 DEBUG - PROCESSING REQUEST beginMigrationReport
2011-01-22 10:26:59,558 DEBUG -           Connection#1-
2011-01-22 10:26:59,558 DEBUG -                Connection type-Application
2011-01-22 10:26:59,558 DEBUG -           Connection#2-
2011-01-22 10:26:59,558 DEBUG -                Connection type-FileSystem
2011-01-22 10:26:59,558 DEBUG -                Connection type-Application
2011-01-22 10:27:00,324 INFO - Client Enable Status false
2011-01-22 10:27:02,355 INFO - Client Enable Status false
2011-01-22 10:27:23,355 DEBUG - Getting LCM callback info from Registry for product: HP
2011-01-22 10:27:24,011 DEBUG - LCM callback : http://server:8300/HyperionPlanning/servlet/HspLCMServlet
2011-01-22 10:27:24,871 DEBUG -                Application name -newapp
2011-01-22 10:27:24,871 DEBUG -                Product name -HP
2011-01-22 10:27:24,871 DEBUG -                Project name -Planning
2011-01-22 10:27:24,871 DEBUG -                Connection name -AppConnection1
2011-01-22 10:27:24,871 DEBUG -                Connection type-FileSystem
2011-01-22 10:27:24,886 DEBUG -                Connection name -FileSystem-Connection2
2011-01-22 10:27:24,886 DEBUG -                File path -/PlnUnits
2011-01-22 10:27:24,886 DEBUG -      Task details -
2011-01-22 10:27:24,917 DEBUG -           Processing source options -
2011-01-22 10:27:24,917 DEBUG -           Processing source filters -
2011-01-22 10:27:24,917 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:27:24,917 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:27:24,917 DEBUG - PROCESSING REQUEST initializeMigrationTask
2011-01-22 10:27:24,933 DEBUG -                path - /Relational Data,type=,pattern - *,recursive - true,modifiedBy - null,startDate - null,endDate - null
2011-01-22 10:27:24,933 DEBUG -           Processing target options -
2011-01-22 10:27:24,933 DEBUG -           Completed processing Task#1-
2011-01-22 10:27:24,933 DEBUG - END : PackageHandler.initialize()
2011-01-22 10:27:25,324 INFO - Client Enable Status false
2011-01-22 10:27:25,324 INFO - Audit Client has been created for the server http://server:28080/interop/Audit
2011-01-22 10:27:25,324 DEBUG - BEGIN : TaskHandler.run for thread with identity
2011-01-22 10:27:25,324 DEBUG - COMPLETED VALIDATING ALL TASKS !
2011-01-22 10:27:25,324 DEBUG - Running tasks for batch (sequence id) #1
2011-01-22 10:27:25,324 DEBUG - MIGRATING ARTIFACTS FROM "/PlnUnits" TO "Planning/newapp"
2011-01-22 10:27:25,339 DEBUG - Processing task 1...
2011-01-22 10:27:26,042 DEBUG - BEGIN : TaskHandler.getExecutor
2011-01-22 10:27:26,042 DEBUG - END : TaskHandler.getExecutor
2011-01-22 10:27:26,058 DEBUG - AWAITING FOR 1 PERMITS
2011-01-22 10:27:26,058 DEBUG - AWAITING FOR 1 PERMITS
2011-01-22 10:27:26,058 DEBUG - Migrating 1 artifacts in group for thread -1
2011-01-22 10:27:26,167 DEBUG - ZIPPING ARTIFACT E:\Hyperion\common\import_export\lcmadmin@Native Directory\PlnUnits\resource\Relational Data\Planning Units.xml
2011-01-22 10:27:54,667 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:27:54,667 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:28:54,666 DEBUG - PROCESSING REQUEST KeepAlive
2011-01-22 10:23:43,494 ERROR - error /Relational Data/Planning Units - Import failed. Total - 3000, Success - 1032
2011-01-22 10:23:43,494 DEBUG - LAST IMPORTED GROUP EVENT
2011-01-22 10:23:43,494 DEBUG - LAST EXPORTED GROUP EVENT
2011-01-22 10:23:43,494 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - PROCESSING REQUEST updateMigrationInfo
2011-01-22 10:23:43,494 DEBUG - COMPLETED PROCESSING SEQUENCED TASKS !
2011-01-22 10:23:43,494 DEBUG - AWAITING FOR 0 PERMITS
2011-01-22 10:23:43,494 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:43,494 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:43,838 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:43,838 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:43,838 DEBUG - PROCESSING REQUEST postFinalStatus
2011-01-22 10:23:44,056 DEBUG - Writing Migration Status to Shared Services ...
2011-01-22 10:23:44,056 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:44,056 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:44,056 DEBUG - PROCESSING REQUEST endMigrationTask
2011-01-22 10:23:44,291 DEBUG - BEGIN : MSRHandler.getHelper()
2011-01-22 10:23:44,291 DEBUG - END : MSRHandler.getHelper()
2011-01-22 10:23:44,291 DEBUG - PROCESSING REQUEST endMigrationReport
2011-01-22 10:23:44,603 DEBUG - MSR STATUS MESSAGES FLUSH SUCCESSFUL
2011-01-22 10:23:44,603 DEBUG - COMPLETED PROCESSING. CLU EXITED !
2011-01-22 10:23:44,603 DEBUG - PROCESSING COMPLETED !
Please advise ! thx

LCM migration - Unable to see "Planning Dev Applications" Under "App group"

----- Situation ------
* We have hyperion 11.1.1.3.24
* Objective i- trying to perform a LCM file-migration from our DEV environment to UAT
* DEV has only one PMA enabled Planning Application (“budget”), few FR reports & other related artifacts.
----- So far --------
* Successfully Exported these 4 (Shared-services, EPMA, Planning & FR) from our DEV
* Successfully IMPORTED first 2 (Shared services, EPMA).
* Although the migration-Status shows failed in my case, noticed all the artifacts have been successfully Migrated. (Noticed Similar claims have reported in other posts as well.)
But, I am stuck on the Third Step, Planning Artifacts Imports. Since, I don’t see “Planning Dev Applications” Under “Application Group” (in shared-services console).
What Should I do. Any help would be greatly appreciated.
[do I have to create new Planning Application under the same name “Budget” in our UAT & start performing Import ? ]

Yes, you are correct. Thank you. I guess, either I am having some issues OR I am not doing something correct.
So far -
Created a test Planning App in workspace & Deployed. I can see that Planning App under ==> Shared-Services/Default-Application-Group.
Still Checking -
Tried to create a New Application Group (Under shared Services / Application Group) in our UAT. However, only getting the following options though.
APS Servers
Business Rules
Default Application Group
Essbase Studio Server
Essbase:Database server
Foundation
Reporting Analysis
I need to create a New Planning Application Group (in our UAT). Still checking on how to create one.

LCM Migration of planning application

Hi All
I am trying to migrate Hyperion Planning Application from one environment to another. The name of the application in both the environment is different i.e. X & Y.
I took an LCM export of application X into the file system and copied the directory generated into the system where application Y resides.
Now I am planning to import this export into application Y.
Do i need to perform some changes as the server IPs are different & name of the applications are also different
Hyperion Planning Version 11.1.1.3
Regards

Do i need to perform some changes as the server IPs are different & name of the applications are also differentNo. You just need to login to Shared Services (Y), select the artifacts you exported from X and execute the migration. I've always thought Ranzal had a perfect blog post on LCM. No, I don't work for them :)
You might find it useful:
http://ranzal.wordpress.com/2010/03/24/using-oracles-hyperion%C2%AE-life-cycle-management/
Cheers,
Mehmet

LCM migration in 11.1.1.3 goes horribly wrong

Hi all
We are running Planning/Budgeting 11.1.1.3.1
We did a major migration from qa to production via LCM and ran into many issues.
The main one I understand by reading threads out there that apparently LCM does not replace business rules when migrating.
We also ran into the following issues
2.     If the execution plantype for the business rules was different than the plantype for form it was attached to it didn’t keep the plantype intact for business rule.
3.     If there was a existing task list in production it did not get updated with the QA task list post migration
4.     The global variables were not working post migration so had to create them again
5.     The sequences did not get migrated correctly. It had a link defaulting to a plan type in QA which was not updated during migration.
6.     The existing webforms in the production were not overwitten during migration
7.     Existing smart lists were not updated during migration
8.     The exiting macros were not updated during migration
Anyone else out there having these challenges?
Is there a certain order that migrations need to happen in?
or is LCM really that dysfunctional?
any help would be greatly appreciated

Most of the issues you mentioned seem related to Business Rules migration which has always been a pain in LCM. I always do a manual copy paste for the rules, so much tension free.
LCM 11.1.1.3 did have quite a few issues but it sure was usable as I migrated specific components most of the time rather than complete application.
For the points 6 & 7, I've had no issues with Forms and SmartLists using LCM. In fact I found it so much easier using LCM. I believe LCM 11.1.1.3 did have issues with composite forms but otherwise, I think it has been pretty okay.
Did you try to migrate the components separately so that you will know the exact errors that you are getting?
Cheers,
Abhishek

LCM Migration - Instance name? Shared services project Name ? Data source?

Situation
* We have hyperion 11.1.1.3.24
* Objective - trying to perform a LCM file-migration from our DEV environment to UAT
* DEV has only one PMA enabled Planning Application (“budget”), few FR reports & other related artifacts.
So far
* Successfully Exported these 4 (EPMA, Shared-services, Planning & FR) from our DEV
* When trying to import EPMA into our UAT, noticed the status shows Failed. (Noticed Similar claims have been reported in other posts as well.)
Another dilemma that I have it what should I enter on these Instance Name, Shared services Project name & Data source.
* Instance Name ===> ? Not sure. how to find this?
* Shared services project ===> Haven't created one at all. So, which one should I use OR how to find this out ?
* Data Source ===> I guess, this would be the EPMA repository database name ?
Although I can Migrate all the Artifacts into our UAT (as identical to our DEV), Migration status has shown as "Failed". Is this because of the fact I skipped the Destination options with blank values (for Instance, shared-services & data-source). Has anyone ever had success on this Migration step.
OR Should I disregard this migration status, just because we can see all identical artifacts in our UAT.
Any help would be greatly appreciated.

If you log into EPMA and pick an application and select deploy (don't worry you don't have to deploy you can cancel it before you do so),
it will display a popup which will have the
Instance Name (usually default), Shared Services Project (drop down will display different application groups available), Data Source (this is the name you gave when you created the datasource for the application)
Cheers
John
http://john-goodwin.blogspot.com/

LCM Migration error

Hello All,
we are facing a serious migration issue using LCM. We have made some changes in Production and wanted to move them back to Development. ( It works either way here). I tried using LCM using Shared services via workspace and executed migration. I copied that particular folder each for shared services and Planning app into the Import &Export folder of the target environment and executed migration again.
It resulted in with few error namely calc sripts and report scripts dint migrate with blah blah errror.
When I opened the Planning web, I can see the new forms in the list of the forms. but when I click on open, it says "Error Occured".
Its the same when I open the dimensions and everything.
and to my heart attack, I couldnt even open the AppWizard through web, it even says "error occured". Now what is that I can do to achieve this?
Is my whole planning db corrupted? I thought I could atleast get back the app using app wizard by pointing out to the new DB. having my AppWizard gone, what is that I can do now?
Please suggest.

This is what I see in the Planning sysout log
<Feb 15, 2011 11:01:59 AM MST> <Error> <HTTP> <BEA-101020> <[weblogic.servlet.internal.WebAppServletContext@341a61 - appName: 'HyperionPlanning', name: 'HyperionPlanning', context-path: '/HyperionPlanning'] Servlet failed with Exception
java.lang.ClassCastException: java.lang.Error
     at HspLogOn.Handle(Unknown Source)
     at HspLogOn.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     Truncated. see log file for complete stacktrace
And syserr log shows below:
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBAdminManager - Error while linking Object VARIABLES to Project YEAR
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
java.util.MissingResourceException: Can't find bundle for base name HspCustomImgs, locale en_us
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
d{ISO8601} WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.db.DBUserGrpObjLinkTable - Error while executing query: insert into HBRUGObjLink (UserGroupID, UserGroupTypeID, ObjectID, ObjectTypeID, LocationID, TaskID) values(?, ?, ?, ?, ?, ?)
Query Failed: SQL_ADD_PROPERTY:[2, 2, OLAP_MIN_CONNECTIONS, 1]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (EPM11_PLNSYS.PK_HSPPROP) violated
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.actions.HspAction.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.actions.HspPropertyAction.add(Unknown Source)
     at com.hyperion.planning.sql.actions.HspAction.add(Unknown Source)
     at com.hyperion.planning.sql.actions.HspActionSet.doActions(Unknown Source)
     at com.hyperion.planning.sql.actions.HspActionSet.doActions(Unknown Source)
     at com.hyperion.planning.HspJSHomeImpl.addProperties(Unknown Source)
     at com.hyperion.planning.xml.HspXMLApplicationSettings.saveApplicationProperties(Unknown Source)
     at com.hyperion.planning.xml.HspXMLApplicationSettings.handleEndElement(Unknown Source)
     at com.hyperion.planning.xml.HspApplicationSettingsHandler.endElement(Unknown Source)
     at org.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1403)
     at org.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1550)
     at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1204)
     at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:381)
     at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1098)
     at com.hyperion.planning.xml.HspXMLApplicationSettings.parse(Unknown Source)
     at com.hyperion.planning.utils.HspPrefsManager.importAppSettings(Unknown Source)
     at com.hyperion.planning.lcm.artifacts.ApplicationSettingsArtifact.importArtifact(Unknown Source)
     at com.hyperion.planning.lcm.LCMMigrationManager.importArtifact(Unknown Source)
     at com.hyperion.planning.lcm.LCMMigrationManager.importArtifact(Unknown Source)
     at com.hyperion.planning.lcm.LCMMigrationManager.importArtifacts(Unknown Source)
     at HspLCMServlet.doImport(Unknown Source)
     at HspLCMServlet.performExportImportAction(Unknown Source)
     at HspLCMServlet.performAction(Unknown Source)
     at HspLCMServlet.Handle(Unknown Source)
     at HspLCMServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at HspValidationFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3242)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (EPM11_PLNSYS.PK_HSPPROP) violated
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.actions.HspAction.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.actions.HspPropertyAction.add(Unknown Source)
     at com.hyperion.planning.sql.actions.HspAction.add(Unknown Source)
     at com.hyperion.planning.sql.actions.HspActionSet.doActions(Unknown Source)
     at com.hyperion.planning.sql.actions.HspActionSet.doActions(Unknown Source)
     at com.hyperion.planning.HspJSHomeImpl.addProperties(Unknown Source)
     at com.hyperion.planning.xml.HspXMLApplicationSettings.saveApplicationProperties(Unknown Source)
     at com.hyperion.planning.xml.HspXMLApplicationSettings.handleEndElement(Unknown Source)
     at com.hyperion.planning.xml.HspApplicationSettingsHandler.endElement(Unknown Source)
     at org.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1403)
     at org.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1550)
     at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1204)
     at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:381)
     at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1098)
     at com.hyperion.planning.xml.HspXMLApplicationSettings.parse(Unknown Source)
     at com.hyperion.planning.utils.HspPrefsManager.importAppSettings(Unknown Source)
     at com.hyperion.planning.lcm.artifacts.ApplicationSettingsArtifact.importArtifact(Unknown Source)
     at com.hyperion.planning.lcm.LCMMigrationManager.importArtifact(Unknown Source)
     at com.hyperion.planning.lcm.LCMMigrationManager.importArtifact(Unknown Source)
     at com.hyperion.planning.lcm.LCMMigrationManager.importArtifacts(Unknown Source)
     at HspLCMServlet.doImport(Unknown Source)
     at HspLCMServlet.performExportImportAction(Unknown Source)
     at HspLCMServlet.performAction(Unknown Source)
     at HspLCMServlet.Handle(Unknown Source)
     at HspLCMServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)

How to kill a hung LCM migration

We have been using LCM to migrate metadata from planning applications for a while now. FOr a new app, we tried to use LCM to export app yesterday.It never finished running, nor did it create any folders or xml's related to the export.(It shows" In Progress' in the migration status report)
My question is: how od I kill this process?Any new exports I try to run are also getting frozen. An entire system restart also didn't help.
Is there a way to kill this process?
Thanks.
Edited by: 784749 on Mar 27, 2012 9:38 AM

In general, operations like thread suspending/resuming, and stopping, are not considered "good practice". You would probably be better off modifying your application such that its threads can decide themlselves when they need to stop.
However, if you want to use the StopThread() call, you probably need to give it an object which is an instance of the java.lang.Exception class, or any subclass of it. To get an instance of Exception, check the JNI call that creates new objects (an Exception is just an object like any other). Or, what may be easier, make your Java application do "Exception x = new Exception();" and then pass this exception into the native code, and preserve it as a global reference there.

Stuck in LCM Migration 11.1.1.3

Similar Messages

Maybe you are looking for