Stuck in rating screen
stuck in music rating screen in i pod touch pressing done is not working
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Similar Messages
-
The rating stars are stuck on my screen.
I have the 30 GB model. When I press the middle button to go to the "my rating" screen, if I change the rating, even if I change it back, it stays there. Then the stars go off to be replaced by themselves, but it gets louder as it would if you rub the wheel like on the regular bar. The only way to get the starts off is to reset or connect the ipod.
Help?See this.
http://docs.info.apple.com/article.html?artnum=303130 -
Unable to boot Z10, stuck on loading screen at 99% after a few hours.
Hi, I am unable to boot Z10, stuck on loading screen at 99% after a few hours. I did not try to update, nor load any other OS versions. Running a Bell Canada 10.1. Tried to pull battery, leave phone boot for 5 hours, still stuck on 99%. I tried plugging it in BB Link and computer will not recognize it.
dazedandconfused wrote:
Every option Im seeing is telling me Im going to lose my data... is this true? I know with other phones ppl are able to mount the device as if it were a hard drive and pull content from it... is this not possible with the Z10? Thanks...
I understand you are frustrated and seeking solutions, but please don't double and triple post your inquiry.
I've answered your thread already, here:
Re: Z10 stuck on loading logo on starting up
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
how can I keep my data doing a hard recovery on my phone? I uploaded newest version and phone is stuck on a screen telling me to plug phone into computer and go to iTunes, when I do this, iTunes says my phone is in recovery and I need to restore, Can anyone please help me get my phone back without losing anything?
You shouldn't have to restore your phone to keep your data. But first press home and on button at the same time until phone shows up Apple logo an boots up normally. When the phone comes back on plug into ituens and back it up by selecting "Back Up Now". Once backed up, you can press update and install 7.1.1 and it will restore and recover all your previously backed up data. You can also press "update" and itunes will automtically back up the phoen and install 7.1.1.
-
This morning my MBP, mod 6,2 (8GB, 500GB), started acting strange (would not minimize Word, Safari would crash and re-crash on restart...)
so I decided to reboot it. Never came back.
The system sits on the grey screen forever. In many attempts, once or twice it went to the login screen, and after I entered the password, got stuck on that screen removing the cursor.
So far I have:
- booted ML in recovery mode, checked and rechecked the HD (verify disk, check permissions....) - all ok
(recovery mode runs fine, I can browse the web, run disk utility....without any problem)
- reset PRAM and SMC (even if the problem does not appear related)
- booted the AHT disk and passed the brief test (am running the extended one now)
- booted in verbose mode and learned that the system gets stuck in these steps
Com.apple.launchd 1 com.apple.UserEventAgent-LoginWindow # stopping job
Com.apple.launchd 1 com.apple.UserEventAgent-LoginWindow # Sent Job SIGKILL
Com.apple.launchd 1 com.apple.universalaccessd # stopping job
Com.apple.launchd 1 com.apple.universalaccessd # Sent Job SIGKILL
Com.apple.launchd 1 com.apple.helpd # stopping job
Com.apple.launchd 1 com.apple.helpd # Sent Job SIGKILL
Com.apple.launchd 1 com.apple.coreservices.appleid.authentication # stopping job
where # is the process ID, which keeps increasing. The first time it appears, reads 249, then works its way up constantly.
Any clue on what could be wrong?? I'm mostly interested in backing up the last few days of work before doing anything
drastic with the system, but need to get in the system to do that.
Thanks in advanceIf you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
Need Help For iMac G5 Stuck On Grey Screen Or Apple Logo No Spinning Gear!
Hello everyone i'm new here and i'm new for using iMac for some reason i was trying to clean or to fresh installation the iMac that my brother gave it to me that he bought it into the flea market without the original disk on it! when i erase the Macintosh HD and some of the partition o iMac then reboot it now the iMac stuck on grey screen or apple logo no spinning wheel shown. and i also try to search and try all the tips of all mac user's like all the command key's and follow the instruction of them but still nothing happen..
Holding CMD & R just to go disk utilities nothing shown up only apple logo and the noisy fan.
Holding alt and it go to blue screen and show my mouse Pointer Refresh Logo, Hard drive Icon, Arrow Sign.
i can click Arrow Sign and it go Apple Logo and within 2-3 seconds and it change to Power Sign Logo,
i can click Refresh Logo but nothing happen .
i can't click the Hard Drive icon.
CMD, Option, P & R to Reset i also try and it's the same nothing change.
CMD, Option, ESC no action shown.
Is there anyway to fix this issue or problem please and thank you for help.
Hoping to get result for all of you guys P.S
iMac G5
v10.5.8
LeopardYou need to have the install DVD that was issued with the iMac
You can call Apple at 1-800-275-2273 -
Powermac G5 stuck on grey screen start up and fans running wild
Hi All
I also have the recurring problem all of a sudden - yesterday all seems well, today am stuck on grey screen and fans getting stronger by the minute. NOTHING works - have been through all sorts of forums and the most I got was to try disk utility - which says all is well - replaced the battery - tried just about anything short of pouring some acid on the **** thing, won't boot from original install CD either - I really need this machine as I earn my living with it and cant afford a new one and why as it was working just perfect - now this mess. In a way don't know why the excellerating fans are not built to simply pick up speed and then eat into the PC board and CPU - at lest this way we know for sure there is nothing we can do.
Does no one here know why the mac is doing this - not even the mac fundies? Unbelievable. I live in Namibia and Apple Mac support here is similar to that on this website - might as well write this on a wall - that is why I am really frustrated... **** MacFollow these steps in order:
http://support.apple.com/kb/TS2570
The G5 is also subject to solder failure around the RAM slots and memory controller.
It is a fatal condition, but one that can sometimes be temporarily sidestepped by heating the logic board between the RAM slots with a hair dryer.
Heat the board until very warm (hot) then start.
If your machine starts after heating, then you better just leave the machine on all the time.
You never know when the trick won't work...... -
My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?
This is covered in the basics section of the manual:
iPhone User Guide (For iOS 5.0 Software) -
Stuck on grey screen screen at start up...apparent Qmaster bug.
So I found what appears to be a bug. At least for me...and at least in 10.6. Not sure if this effects other OS versions.
I was having an issue with start up getting stuck on grey screen. Symptom is eventually start-up circle segments would stop spinning and left hanging there on the grey screen.
There are Apple doc's and ample google hits on this subject. But I have found nothing pertaining to Qmaster as being a possible cause.
It took me awhile to figure it out and was not an obvious issue.
I thought it might be helpful posting this here to bring this up on a google search for someone who may be having the same problem.
My issue:
Doing image sequence Maya render's. However, I doubt it is Maya related.
If I pause the render in the Batch Monitor. And shutdown. Something with Qmaster still being active hangs my startup. It is repeatable behavior.
I have to start up holding shift key for safe mode.
You will note, if you have 'Show Qmaster service status in menu bar', under the Advance button of QM's System Pref's pane, that the green light is on.
That green light being on, gave me the clue that it was something to do with Qmaster.
Clicking; Stop Sharing and restarting clears the start up hang.
It appears, whatever permutations Qmaster expresses with a paused render on start up, is somehow preventing normal start up.
Since I have read that menu bar items may be one possible cause for start up issues. It's also possible and therefore worth mentioning that unchecking "Show Qmaster service status in menu bar". May also resolve the problem. I have not tested that.Issues like this are often caused by startup jobs that are taking far too long to finish. It definitely looks like a serious bug so it's worth reporting it to Apple at either of the following places:
http://www.apple.com/feedback/compressor.html
http://bugreport.apple.com -
STUCK ON GREY SCREEN! !PLEASE HELP!
!!HELP!! STUCK ON GREY SCREEN
I have a MacBook 10.5. Its a few years old anyway it seemed to be working fine up until a couple of weeks ago then it started taking ages to startup.
I started it in singlemode then typed /sbin/fsck -fy then a message came up "harddrive appears to be ok" next i typed "reboot" and the system started booting.It started as normal with the apple logo and spinning chime,next the screen turns blue where the login screen normally appears but then the screen turns grey with no logo with just the pointer arrow on it and it doesn't seem to load past that point.Can anybody please help me solve this problem i have my kids photos and stuff on it that are unreplaceable.
Hopefully there's a command line that can help also I don't have a installation disk so is there a way I can download 1 onto USB??
THANKS HEAPS!!!!!Hi Eug07349,
Thanks for visiting Apple Support Communities.
It sounds like you may be experiencing a software issue. I'd suggest trying the first two steps in this article (Disconnect, test peripheral devices and network cables, Perform a Safe Boot):
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Best,
Jeremy -
i have a old powerbook g4 which i usally use to store some photos and to listen music. the battery of my powerbook is completly dead so i used to use my powerbook using charger adapter so whenever my power cuts down my laptop will be shutdown.
one day i had just bootedup my powerbook and some date notificateion poped up so i press enter and suddenly my power went off and laptop shuted down. and next time when i tried to boot its stuck at grey screen , i even cant reach the apple logo and spinner. please helppp me :!!!!!!!!!!!!!!!Resetting PRAM and NVRAM is not working
and i cann't boot it on safemode holding shift button and while holding option or c button at startup i can only see three things 1 is refresh button, 2 macintosh HD with X under it, 3 arrow forward button please help me -
My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do
Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
In other words, your computer can't talk to your operating system so you can't access your data.
Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
First: Shut down your computer completely
Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
Hope this helps, it's annoying but it's your safest bet.
All the best. -
I have an Ipod touch and have an audiobook stuck in the screen. I have turned it off and also resynced and I can't get it to go away.
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod. -
My iPod is "Stuck" on one screen! How Do I Fix It?
My iPod Nano is stuck on the Screen it looks like when you reset it! I plugged it into my computer to sync it with music and when I took it out, the music was there but it wouldn't play. I tried hitting the fast forward button but then it reset and it still won't come off the screen that has an apple! Basically what I'm seeing is a black screen with the white apple in the middle. Please!! I can still reset the iPod but it still get stuck in the "reset" screen! *+HELP ME+*
Message was edited by: James729See if these help.
iPod shows only an Apple logo and doesn't start up.
Only the Apple logo appears when turned on. -
my ipod is stuck on a screen that has a picture of the ipod plug and itunes, wen i plug it in 2 itunes it wont do anything as i have a password on my ipod and i need 2 put in password 4 itunes 2 work, please sum1 help me......................
Try connecting the device to your iTunes library in recovery mode and restoring it. Here are instructions for getting your iPod into recovery mode.
http://support.apple.com/kb/ht1808
B-rock
Maybe you are looking for
-
WebLogic JMS high memory usage and frequent full GCs
Hi Team, We have below set up in production (and all the lower environment). 1. WLS: 10.3.6 (64 bit) 2. Java: HP JDK 1.7.0.06 (64 bit) 3. Two Manage server instances in cluster with one Migratable target 4. one JMS server with Persistence
-
Hibernate with oracle 9 and 10
Hi, We're are developing application using hibernate and oracle database. Our application currently using hibernate 3.1.2 and oracle jdbc 9. Because we are using 10.2 version of database, we decided to migrate to jdbc 10.2.0.4 driver version. And the
-
Putting a symbol on a 3-d object
What are some reasons why a created wont show up on a 3-d object. I made a graphic symbol but it will not show up on the object when I select it in Map art. It is on the correct layer. What I create another small symbol, like a box or a simple path i
-
Posting of variances for purchase for sales order stock (Z)
Hello I have an issue when posting invoices related to purchase order with item cat Z (valuated sales order stock). The material is a standard material with 'Price control' 'S'. I would like the variances to follow the goods. If the goods are still o
-
I called a contact and their current location showed up. I've never noticed or seen that before. Is that feature only available during calls or can I find current locations of any of my contacts?