Stuck in Reset mode Any way out?

Currently trying to reset my new airport extreme and now the LEDs are flashing. Tried both a soft and hard reset. Just bought the base station today. Thanks in advance.

Thx. Unfortunately, my extreme base station was not
recognized from the start. The situation remains the
same. Again, thanks.
First, could you make your seller check it.
Then, if it's OK,
you may be in a case were you're trapped in a bad channel
automatic choice you can't escape through an AirPort
connection.
To check this, could you turn off your AEBS.
From your Ethernet connection to Internet,
download iStumbler (http://www.istumbler.net/),
and check if you have other wireless networks in your
neighbourhood.
If you have neighbour's wireless networks, you will
have to reconfigure your AEBS by its Ethernet
LAN port with "AirPort Admin Utility" (use an Ethernet
cable from your Mac to your AEBS).
You have to change its channel to a free one:
one which is separated from your neighbour's
ones by three empty channels. For example, if your
neighbours use channels 1 and 11, you may choose whichever
channel you want between 5, 6 and 7.
dan    

Similar Messages

  • C1140 Radio stuck in "reset mode" any fix?

    This question was posed before a year ago, but not answered. 
    Some of my C1140's Radio-0, the BGN are going in to "reset mode".  The code level is 12.4(21a)JA1.  Is there any fix out for this.  The are running in AP mode, not connected to the WLan controller.  Rebooting the AP seems to fix the problem for several hours, then Radio0 is back down.
    Thanks

    Hi,
    Please upgrade the IOS on the AP to 12.4(21a)JY and this will resolve the issue..
    Lemme know if this naswered ur question and please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • Extreme Stuck in Reset Mode

    I have an Airport Extreme Base Station that appears to be stuck in reset mode...
    It has the middle light blinking slowly and right/left LEDs stay off
    Looking on Tech Articles, this means the base station is in reset mode
    This Airport has been in "reset" mode for two days
    Things I've tried...
    soft and hard resets per Tech Articles
    Also attempted to connect Base Station directly to my laptop (that has Airport Admin Utility installed)
    While connected, used suggested ip addresses
    192.42.249.14 as well as 192.42.249.15
    255.255.255.0
    192.42.249.13
    also tried with DHCP
    swapped ethernet cords in case this was an issue
    The end result is that I can never see this base station in Airport Admin Utility or Airport Setup.
    It appears to be stuck in reset mode.
    Any suggestions appreciated
    Airport Extreme Base Station   Mac OS X (10.4.3)  

    Jennifer, Welcome to the discusssions.
    Have a look at this link and see if it helps.
    http://docs.info.apple.com/article.html?artnum=303595
    Pull the plug on the Airport to reset it to Factory Default Settings.
    Cheers Don

  • My iphone 4 currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?

    currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?

    i have tried to restore via itunes as i would have usually, half way through i get an error code 3194 pop up.....and yes i do back up.
    Thanks for your help but i've already tried this a couple of times.

  • Adobe reader quits unexpectedly on Mac OS Yosemite.Tried reinstallation. No relief.Any way out

    I am using a 13 inch Mac book pro running Yosemite.
    Adobe reader quits unexpectedly.
    Tried reinstalling Adobe Reader, issue still continues.
    Any way out.
    Hoping for a reply.
    Thanking you in advance.
                                            Dr.Anand

    Barbara, Thanks very much taking the time to respond to my posting. Your input and directions were just what I needed.I accessed the print settings in the pull down menu, setup the print options including the color profile for Elements and the Printer to sRGB, and printed my picture. This resolved all the invalid color problems I was having, but I did notice that there was a hint of magenta overall in the picture. I had read an article that said to use Canon Color Matching instead of Color Sync to prevent that but I couldn't make that change in the pull down menu. I tried in the Presets dialog box but that didn't appear to be possible. Should I make that change as well?
    Also, in my travels through Elements 13 I notice under Edit->Color Settings that there were options for No Color Mgmt, Optimize for Screen, for Printing, or ability to chose one or the other (real time I assume). How do those options fit into this scenario?
    Thanks again

  • Every time i try to update or restore my iPhone 4 (5.1) it tells me a lot of errors and it stuck in recovery mode :/ any help?

    Every time i try to update or restore my iPhone 4 (5.1) it tells me a lot of errors and it stuck in recovery mode :/ any help?

    Well, if you want or need help, it would be a good idea to start with telling us what those errors are.  We're not mind readers.

  • IPhoto is stuck in "Downloading Mode" Any suggestions?

    iPhoto is stuck in "Downloading Mode"  Any suggestions?

    Do you mean Importing mode? Use the Force Quit command. It's under the Apple Menu.

  • Stuck in recovery mode no way to get out.

    Hi
    I tried to update my ipod 4G but after finishing download it went to recovery mode and when I connect it to itunes it it doesn't restore my ipod and show that error: software update server could not contracted. so I tried to get away the recovery mode but none of the ways work I try recboot and tinyumbrella and dfu mode but they didnt work.
    Now I'm stuck in recovery mode I can neither restore nor get out recovery mode.
    Please someone help me.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Solution to 5G iPod stuck in reset mode

    I wanted to share what worked for me. After 11 months, when I went to synch my iPod, iTunes said it saw an iPod in reset mode and that it had to be reset before it could synch. I tried the 5R's many times, but to no avail. What worked was when I completely removed iTunes (via the installer) and then reinstalled it (before I had only repaired iTunes with the installer). After that, the synch restored everything to my ipod, and it's back to normal (knock on wood).
    Hope this helps people out. Basically, do the 5R's but be sure to actually delete and reinstall iTunes by running the new installer twice.
    Dell laptop Windows XP Pro
    Dell laptop   Windows XP Pro  

    Solution that worked.

  • My ipod touch is stuck in reset mode

    after reset my ipod touch 4 (5.1.1) is stuck in reset mode

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Just what is "reset mode"?

  • My ipod is showing an "activation required" message on my home screen and the slider to unlock it is not working.  I've had it for 2 years and had no problems and then it randomly locked up on me and won't let me do a reset.  Any way to fix this?

    I haven't been able to use my ipod for a month because its stuck on a screen that says "Activation Required" and the slider to unlock it is unresponsive.  I've drained the battery and recharged it, I've tried resetting it.  When I try opening it in iTunes it tells me its unable to access it because the iPod is locked with a passcode, which I can't enter on my iPod because the slider is unresponsive.  Any help?

    next thing i would think of is to ask bestbuy apple retailer or bestbuy pple to help u out from here bc im not sure what to do next if u cant get it into dfu mode.
    all i can think of is to hold home and power for 30 seconds in the meantime of showing the apple sign at least once or twice.
    either that, home and power flashes once and 1/2 sec later release power while holding home still and plug it in wihout trying to let go the home button. dont even let go until itunes says somthing remotly saying anything ...lol

  • Iphone stuck on reset mode with an apple logo

    hi i was resetting my iphone while it wasnt connected to the computer. now its stuck with the apple logo on it can u please help me. i want to get it out of this mode it was just working not to long ago. thanks you...

    I have haerd that if you hold the reset/sleep + home button to reset, the when the apple logo appears let go of the reset/sleep button and hold the home button and it will put it into discovery mode when this happens plug it into itunes............... it might take a few tries

  • Wireless strength weaker in clamshell mode- any way to remedy?

    Why is my wireless connection (via Time Capsule) much weaker when my MacBookPro is in clamshell mode? Is there a way to strengthen this other than opening the notebook? We already have an Airport Express very close to strengthen the signal. When opened fully, there is full wireless strength but in clamshell mode, it drops to 1-2 bars/rings and is noticeably slower to do anything online. Thanks for your tips, folks!

    If the MBP is close to the AirPort, then connect the two using an ethernet cable (about $20 from your local computer store). It will be both faster and more reliable than any wireless connection
    Bob

  • Apple TV Stuck in restore mode- any tips?

    I updated my Apple TV to iOS4.3 and was having some annoying wifi issues, so decided to do a software restore on my Mac. I hadn't done that with the ATV previously, but have with iPhones.
    The install seemed to be just about done, then popped up with an unhelpful error message-
    "... unknown error (9)"
    I've tried plenty of times, and usually get the same error, but sometimes it's 1610, 1611 or 2006.
    I tried on a Windows XP laptop and got error 12.
    If I plug it into HDMI I get the 'Connect to iTunes' logo on the TV.
    Other things I've tried: uninstalling and reinstalling iTunes and Quicktime, quitting iTunesHelper, trying to force the ATV into DFU mode, swearing, getting grumpy, and googling like crazy.
    I think I've run out of options, and would already have taken the little black box to an Apple Store, except the nearest one is almost 2 hours away.
    Does anyone have any suggestions, or any educated guesses about what my error messages might mean that could save me that 2 hour drive?

    Annoying - my iPad bombed out during the iOS 4.3 update recently but eventually sorted it.
    The codes are not all covered here but take a look anyway:
    http://support.apple.com/kb/ts1275
    "Error 9: This error occurs when the device unexpectedly drops off of the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software."
    Couldn't find similar for AppleTV but someone else may post link.
    I think it sounds as though you've tried most steps like different computer/restarting etc.
    Ensure firewalls aren't blocking things, try disconnecting other devices, or if there's a possibility the USB ports aren't providing enough power try connecting via a powered USB hub.
    AC

  • Stuck in reset mode

    I've been having issues with my Iphone4s (non jailbroken) I decided to "reset all settings" when I did that the little apple logo popped up and I assumed it was reseting.  well its been stuck in the same spot for more than an hour now.  I plugged it into my Mac to sync with itunes but because my phone is stuck on that screen you have to respond to itunes on your phone. Not possible.  (FYI my sleep/lock button is broken) any help would be greatly appreciated!!

    I ended letting my phone completely die, and then plugged it into my iTunes. And it worked! Hope it works for you also!!

Maybe you are looking for

  • Pavilion Elite e9180f freezes, crashes, BSOD

    I am one of the many unhappy customers who bought this piece of junk (Pavilion Elite e9180f) and waited too long to return it because in my naivete, I thought it was some kind of simple software issue.  Nope!  It's definitely something wrong with the

  • Error message: This application cannot be installed because...

    I am getting an error message when I try to install the trial version of Muse on a Mac OS X 10.8.2. What do I do? I have downloaded it several times over different days and I still get the same problem.

  • Mail service gradually stopped working, but shows as running

    A problem with the UPS caused our OS X Server based mail server to shut down uncleanly. WHen it was restarted SMTP and IMAP were running and mail could be sent out by SMTP but incoming mail was just getting put on thr queue rather than being putinto

  • Close other tabs option freezes computer then tabs will not close at all

    When I have multiple tabs open and I click the close other tabs button The computer freezes for about 1 minute and when it is unfrozen all the tabs are still there and when you click to close them nothing happens. This is a daily happening and extrem

  • Report fields overlap

    in my report ..... there are 3 fields first name , middle name and last name.... these fields are arranged one after the other in the same line seperated by space...so that it appear as full name...... and in the same way these three fields are displ