Stuck in "restore" after going from error 13019, to error 3194 to error 1604....now what?

I'd be really grateful if someone could help me.
I am very new to apple products and bought my ipod only in July this year. I didn't realise you had to keep updating them etc.. but anyway.
My internet connection is extremely slow and unreliable (about 5 kb per second - kb, NOT MB!). I managed to download the iOS 5 update (iPod4,1.5.0_9A334_Restore - is that the right one?) onto an external hard drive when I was somewhere else. Someone in these dicussions showed me how to update it from there by using shift while pressing update.
Anyway, first I had Error 13019, someone helped me to get past that. At the next stage I got Error 3194. Someone showed me how to get round that.......then when all seemed to be going fine, I got Error 1604. Apparently it's the cables that might cause a problem but my cables etc. passed the device diagnostics with flying colours right before I began. When I run diagnostics now, the iTunes says there is no Ipod plugged in - but it is!!
My Ipod is now in recovery mode, and I have the following screen shots. (see below). On the one hand it seems like all is fine, it says my software is up to date...but there again it says it has detected my ipod in recovery mode and needs to restore/update.....this is all driving me mad - I only wanted to listen to my music and read e-mails when in a wi-fi cafe! Now it really feels like this is more hassle than it's worth....
I tried disconnecting the Ipod and pressing the home button and the on/off switch, but it just comes back on in restore mode.........sometimes the apple logo appears for a few seconds, then it goes back to the restore picture of the USB cable, and arrow and an iTunes logo above it.
Can anyone help me restore my ipod to functionality as well as my faith in this product?
many thanks, Nick

Hi Udo,
I'm relatively new to this kind of activity so please kindly let me know how to delete the metadata.
Do I need to re-import the metadata again.
Regards,
Pruthvi

Similar Messages

I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page

i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

Contact Apple support for warranty service.

HT1766 my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?

my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?

Hello, fschris.
Thank you for visiting Apple Support Communities.
When experiencing issues updating or restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

TS3694 How do I restore my iPhone from recovery mode when I get an error 3194 message

I am trying, unsuccessfully, to restore my iPhone 4 from recovery mode. When I attempt to restore through iTunes I get a message telling me the process cannot be completed because of an error 3194. There is no documentation or information on what this error means - and how to restore the phone when this message appears. Can anyone help?

This usually means you previosly used an iPhone hacking utility such as tinyumbrella, altering the hosts file on your computer, and blocking access to the apple server, gs.apple.com.
"Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service."
iTunes: Specific update-and-restore error messages and advanced troubleshooting

TS3694 Hi, When trying to restor iphone 3g from i tune in recovery mood, 1015 error kee appears.

Hi, Please need hel.
I tride many times to restor iphone 3g from i tune with recovery mode, an error 1015 keep appears each time i try.
Please help.

Yes, it was Jailbroken.
And I reset (Erase all content and setting) this took about an hour.
but it not restart again, the apple icon kept on screen.
now i just want to restor to original without jailbtake ( I have enough) from jailbrake.
just need to keep the original iOS.
and with itunes the 1015 error each time i tried to restor.
Thanks.

After upgrding from 1.6 to 2.0 javaskrpt-error

after upgrding from 1.6 to 2.0 javaskrpt-error while navigation to parent window from a popup-site.
in the page100:
<script language="JavaScript" type="text/javascript">
function callMyPopup (formItem1) {
var formVal1 = document.getElementById(formItem1).value;
var url;
url = 'f?p=&APP_ID.:99:::::P99_X_WOHER:' + '"' + 'P100_I_APPL_SELECT' + '"';
w = open(url,"winLov","Scrollbars=1,resizable=1,width=450,height=400,Status=1");
if (w.opener == null)
w.opener = self;
w.focus();
</script>
in page99:
<script language="JavaScript">

</script>
in report a column, to navigate:
javascript:passBack( '#APPL_ID#' );
who has a idea?

hi carl,
the javascript-debugger of mozills say this:
Recorded local startup 8, global 2778424.
Error ``SyntaxError: syntax error'' [xs] in file ``http://tucana:7777/pls/htmldb/f?p=111:99:1323775508378688867::NO:::'', line 18, character 36.
Error ``passBack is not defined'' [xs] in file ``javascript:passBack( '93' );'', line 1, character 0.
Stopped for error handler.
#0: function (null)() in <javascript:passBack( '93' );> line 1
Continuing from error handler.
Error ``ReferenceError: passBack is not defined'' [xs] in file ``javascript:passBack( '93' );'', line 1, character 0.
Error ``SyntaxError: syntax error'' [xs] in file ``http://tucana:7777/pls/htmldb/f?p=111:99:1457834329818708093::::P99_X_WOHER:%22P100_I_APPL_SELECT%22'', line 18, character 36.
you understand this? im not!
bye roberto

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs. Setting up the connection has been a hit and miss. Have tried both x86 and x64. Any ideas? Use ODBC from the control panel and C:\Windows\SysWOW64 same results. Using
SQLexpress 2008r2
Thanks

Hello,
Please consider to configure Windows Firewall or disable it. Not only Windows Firewall but any security software.
https://msdn.microsoft.com/en-us/library/cc646023(v=sql.120).aspx
Windows Firewall is enabled by default.
Make sure you are using SQL Server Native Client to create the ODBC DSN. Not all Windows versions have it, so you may need to download and install it.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

T400 Stuck at 800MHz after resume from Hibernation

This evening, my T400's processor speed was stuck at 800MHz after resuming from hibernation. Machine was plugged in. Power manager processor speed settings were not set to lowest performance. Even running processes that put the CPU at 100%, the machine stayed clocked at 800MHz. All drivers, BIOS, etc. are updated to the most recent version.
Eventually, I shut down the machine, and then started it back up. Everything was fine.
Does anyone have any suggestions to prevent this from happening again?
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Hello everyone, I observed a new correlation: last time when my touchpad was recognized as "PS/2 ALPS DualPoint TouchPad" (instead of "PS/2 Generic Mouse") happend *after resuming from hibernation*, and also with the concomitant phenomenon of having no sound after resuming. (Sorry for the oversophisticated language, I have just had a philosophy of mind exam ) After this I hibernated the laptop again and resumed, and I *had* sound, but had the touchpad recognized as "PS/2 Generic Mouse", so it seems that I am lucky with the touchpad just when I am unlucky with sound. And, as far as I remember, the earlier occasions when I was lucky with the touchpad were also after resuming from hibernation. So it seems that something else than psmouse sometimes fails to restart after the hibernation, and this is what causes psmouse to work as expected! I am not an expert in kernel, so could someone help me, what to look for? An obvious guess would be sound-related modules, but it would be really weird if they had anything to do with the touchpad, so for now I don't start to learn how sound is handled in Linux (it looks like a lot to learn...)

I am getting another iphone tomorrow will i be able to restore my stuf from my old iphone to my new iphone threw icloud what i have backed up

I am getting another iphone tomorrow will i be able to restore my stuf from my old iphone to my new iphone threw icloud what i have backed up And how do i do it?

See Here for Details
Old Phone to New Phone
http://support.apple.com/kb/HT2109

HT1212 ipod touch disabled due to too many tries on password. tried to restore through itunes but says I need newer version for software. now what?

ipod touch disabled after too many tries with password. tried to restore through itunes but says we need latest version of software. now what?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I phone 3GS stuck in restore after installing ios5

Hello to all,
Just wondering if anyone else is having issues with there I phone 3GS after they installed the new ios5? I was able to install the new update but when my phone goes to install the backup I get an " unknown error -1". It is now stuck in restore mode and when I go to preform the restore it just kicks this error message up. Just wondering if anyone has found a solution. Thanks

I got the same prolem like this.How am ifit it out

My iphone 4 is stuck in restore after trying to update iOS 5. It will only send troubleshoot 3014

I have been trying to update my iphone and its stuck on restore. The only thing it will do is send me a messege via iTunes that marks troubloshoot 3014.
Help Please!!

Get your money back from the seller, and if you are not immediately successful file a complaint with eBay.
Not all jailbroken iPhones can be fixed. That's probably why it was on eBay.

Help (please) w/ Full System Restore after downgrading from Snow to Leopard

Yes. I should have created a separate partition, cloned the drive, etc…. But everything was working so well I figured an upgrade to SL would make things amazing. Wrong.
So I downgraded from Snow Leopard to Leopard, using a clean Erase and Install from the OSX DVD that came with my Mac. Told by an AppleCare techie that I could restore my system from a Time Machine BackUp, I was confident that when the install successfully completed I would be able to restore from the TM Backup I made PRIOR TO installing Snow Leopard.
However, the 'restore system from time machine…' option that came up at the end of the Leopard installation told me I only have one TM backup, the latest one made under Snow Leopard (which obviously cannot be used to restore a system now running on Leopard.
When I log into the OS, I can open TM and choose the last 10.5 (Leopard) backup I made, but it seems to only let me restore the 'Macintosh HD' as a folder. So here is where I am stuck:
How can I restore my system - now on a clean install of Leopard - to the last TM backup I made under the selfsame OS. {Sorry if this is a simpleton question - I just really do not want to ** anything up}.

.adamo wrote:
Thanks, Pondini -
Good to know the AppleCare rep. I talked to (apparently) knew nothing about time machine or how to restore a system from it. I was given nothing but wrong and bad advice…
Yeah, unfortunately that seems to happen on occasion. They don't seem to have access to decent info on things they don't understand, or just "wing it" or something.
Anyway, the erase and install happened, so at least my system is 'fresh'. I booted from the OSX DVD, went into the Utilities menu, found the TM Back-up I wanted, et voila. But it seems I could have bypassed the whole erase/install thing and just restored with the BackUp from TM.
So I must say, to Apple's credit, that TM works extremely well, and exactly as described; couldn't have been more painless (not what I'm used to with computers, at all).
That's why you got a Mac! (They're certainly not perfect, but they're pretty good!).
Glad it's sorted out, and thanks for the star!

I restored my bookmarks from a resent .json file, but one folder is now empty and one is missing.

Hi,
Because of reasons my computer needed to be refreshed. My old firefox profile folder was saved though, and with that the bookmarkbackups. As the title says I restored my bookmarks from a resent .json file, but one folder (containing probably about a hundred bookmarks) is now empty and one other is missing completely.
In some places I have a 5 levels deep folder structure for my bookmarks, but since the folders missing are from different levels I don't think this is the problem.
The now empty folder contained six or seven other folders, that in turn contained a lot of bookmarks with titles including non-alphanumerical characters. †?|&*()<-/., to be precise. However, if I restore a very old .json (from september 2013) the folders are present and contain the mentioned bookmarks - albeit much fewer, since the file is old. A few other bookmarks still present also contain the mentioned characters, so this is probably not the problem either.
The folder that is completely missing just contained a lot of bookmarks that were to be sorted.
When opening the more recent .json files (I have a whole month of automatic backups to choose from) in the firefox scratchpad it would seem that the bookmarks are missing alltogether, so I suppose that there is not much to do about it (please correct me if I'm wrong), but I definitely want to report the bug.
Is there anything at all to do about it?
Thanks,
Hanna

If the bookmarks aren't present in the JSON backup then it is likely that you got a corrupted places.sqlite file at some time that caused the backup not working properly.
Did you try all the backups?
Note that the xxxx part of the bookmarks-####-##-##_xxxx.json file name shows the number of bookmarks in the file.

Every time I try to sync my ipod touch it comes up "Cannot sync error 13019" can you help?error

Every time I try to sync my ipod touch it comes up "Cannot sync error 13019" can anyone help please?

I have the same problem but I still cannot get my itunes to work.
I've downloaded the latest itunes, I've unsynched voice memos, music, apps, movies and everything else. I've restarted itunes and my computer but still I cannot synch my ipod touch, I still get the error 13019. Any other solutions?

Stuck in "restore" after going from error 13019, to error 3194 to error 1604....now what?

Similar Messages

Maybe you are looking for