Stuck in speaker mode
i have had my ipod for a few years now and when i turned it on this morning, it would not go off of speaker mode when i put the headphones in. when i put the headphones in, the ipod plays through both the headphones and the speaker. what should i do?
First make sure the headphones are all the way in, meaning the white plastic part is flush with the Nano and no silver from the plug can still be seen.
If that doesn't help, try a hard reset. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock
Similar Messages
-
Hello,
I own Blackberry Z10.
Today I tried for the first time the headset that came with the phone. I made a call and it worked nicely. When I unplugged it and tried to make another call, i realized the phone (during the call) was stuck in speaker mode and it wouldn't allow me to change it to the handset mode. I click it and it does nothing.
When I replug the headset the options of handset, speaker or headset mode apear and I can change among them properly - they all work. When I select handset and unplug the headset again it switches to speaker.
I can't talk on my phone unless I use the headset or speaker. I tried a factory reset already but the problem remained.
Best regards,
AndréI somehow got this solved by installing the Blackberry Virtual Expert. I performed all the tests and restarted and it came back working.
-
Hi Guys,
My iPhone is stuck in a mode where it thinks the headset is still plugged in.
I cant get any sounds through the speaker. Cant hear sms or emails arrive. If the phone rings i hear it but pple cant hear me or i cant hear them.
The phone works fine with the headphones plugged in.
I have tried all the usual solutions, inserted and removed the headset (at least 50 times)
Soft reboot
full restore
Nothing seems to work. I have searched on this and it seems to be a well know issue but there doesnt seem to be any firm solutions that i can find to fix the problemIf no change after inserting and removing the headset at least 50 times, powering the iPhone off and on, an iPhone reset, and restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem.
Make an appointment at an Apple Store if there is one nearby. -
Speaker problem "stuck" to headphone-mode ?
Got some problems with the speaker right now.. I can't hear the person calling me.. But if I use headphones it will work.. It's like the phone is stuck to headphone-mode, or what to say, Can't hear music from spotify/youtube from the speaker, I can listen to the ringtones in the settings, But i can't listen to music / hear people calling me..
I have restarted the phone like 5 times and nothing happens,. I also tried to reset the phone..
Anyone got the same problem ?.Check the headphone jack for debris one more time. The symptoms certainly suggest that debris is the cause. Shine a light down in there.(Be Careful)
Restore "As a New Device". The backup can put a glitch back on the phone. If that does not work, use your warranty. If you are out of warranty, restore again and unplug to test before choosing from backup or as new(sometimes corrupted data on the iphone can cause strnage behavior).
If all else fails check on price of out of warranty repair. -
My ear bud aux piece is stuck in my headphone port. Is there a way I can turn all my volume on speaker mode?
As long as there is material stuck in the port, the external volume will be disabled. I suggest you take it to an apple retail store or call 1-800-APL-CARE for service
-
I have an Iphone 4s that works fine the speaker is working but all incoming calls are silent. Like it is stuck in silent mode. I have already dont a restore but still the same. Can anyone help me?
You probably did a restore from backup. Do a restore but do not restore from backup. See if that works. if not - service
-
I have an ipod nano 4th generation that is just over a year old. I have had no problems up to now. A few weeks ago i went to turn my ipod on and play my music through my headphones and it was almost like the ipod would not register that there were headphones plugged into my ipod and it was playing on loudspeaker mode. I dont ever use my ipod in loud speaker mode and had not used it for a couple of days when i turned it on and experienced this problem. Any suggestions?
First, if you have a speaker then you have a 5th Generation Nano, not a 4th generation.
Get a flashlight and inspect the headphone jack and make sure there is not an obstruction, lint, dirt, etc., blocking the connection. Clean it out if necessary.
If there is no obstruction, try a different set of headphones. If the problem persists you have a damaged headphone jack and will need to get it serviced. -
Macbook Pro 17" (Mid-2009) Randomly Getting Stuck in Sleep Mode when Unplugged
Hey guys, this is my first time posting so please excuse me if I do anything wrong. Here's the issue:
I have a Macbook Pro 17" (Mid-2009) that has had an issue with the whole computer shutting down at random, but only when unplugged from the MagSafe power adapter. Upon scouring all the forums and discussions I could, I haven't found anyone with the same exact circumstances as myself, hence this post. Let me explain.
Many say it's a battery issue. That can't be, because this has been happening for months, and after I finally got my laptop repaired a few days ago, it still occurs. I had sent it in for a logic board failure, but consented them to fix any other parts that weren't functioning properly. Upon the return of my machine, I found that they installed a fresh hard drive, new battery, new logic board, and a new speaker on the right side. This must mean that neither the logic board nor the battery are the issue.
What else can this point to? Again, it only occurs when the Mac is unplugged from a power source, and it doesn't totally shut down. It goes half way, essentially stuck in sleep mode. The white indicator light on the front freezes, and the power button has to be held to fully turn the laptop off, then pressed again to reboot. It can last anywhere from a single minute to a few hours before shutting off again, and it's always the exact same circumstance, no matter what kind of computing I'm doing at the time.
Note that while no one else has found the solution to lie within resetting the PRAM or SMC (in the discussions I read), I still need to try that tonight and see if it affects anything.
Thanks in advance,
SeanMacs are having problems with SSD drives. The root cause is the OS X journaling file system. The Apple-written SATA controller driver can saturate the bus at times, inhibiting performance. Some manufactures are even selling special "Mac" versions of their SSD drives that are slowed down on purpose to compensate for this problem. Unfortunately, the problem still exists in Snow Leopard, from what I've read.
Also, I read that Apple has secretly slowed the recent new laptops down (3.0GB/s to 1.5GB/s) to compensate for the problem.
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Macsimum News Associate Editor Creator of 'Mac611 - Mobile Mac Support' -
My iPod Touch is stuck in headphones mode
My iPod Touch 5th gen. is stuck on headphones mode, and I DONT WANT TO RESET MY IPOD OR ANY APPS OR PHOTOS ON IT! Oh and I don't really back-up my iPod on the
Please help!
(software is 7.1.2)
I have tried in the headphones thing, plugging and unplugging headphones, turning off my ipod and turning it back on, and none of those worked!
HELP ME!- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted. A problem with the jack is the likely cause
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
Gnome stuck in fallback mode - not recognizing nvidia drivers
Every time I start a gnome session it is stuck in fallback mode. Checking under System Settings > Details > Graphics I see that the Driver is listed as Unknown and Experience is Fallback. Forced Fallback Mode is OFF. I cannot get it to recognize the nvidia driver (I have also tried nouveau but it did not recognize that either). I have tried re-installing the nvidia driver and rebooting, but I can't seem to fix the problem . Here are the logs that I thought might be relevant. If you need to see anything else please let me know . Thanks.
inxi -Gx
Graphics: Card: NVIDIA GT216 [Quadro FX 880M] bus-ID: 01:00.0
X.org: 1.12.3 drivers: nvidia (unloaded: fbdev) Resolution: 132x96
Kernel if it matters:
Kernel~3.4.6-1-ARCH x86_64
Output of Xorg.0.log
1 [ 29.455]
2 X.Org X Server 1.12.3
3 Release Date: 2012-07-09
4 [ 29.455] X Protocol Version 11, Revision 0
5 [ 29.455] Build Operating System: Linux 3.4.4-3-ARCH x86_64
6 [ 29.455] Current Operating System: Linux pluto 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
7 [ 29.455] Kernel command line: root=/dev/sda1 ro
8 [ 29.455] Build Date: 09 July 2012 03:59:39PM
9 [ 29.455]
10 [ 29.455] Current version of pixman: 0.26.2
11 [ 29.455] Before reporting problems, check http://wiki.x.org
12 to make sure that you have the latest version.
13 [ 29.455] Markers: (--) probed, (**) from config file, (==) default setting,
14 (++) from command line, (!!) notice, (II) informational,
15 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
16 [ 29.455] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 01:49:20 2012
17 [ 29.501] (==) Using config directory: "/etc/X11/xorg.conf.d"
18 [ 29.516] (==) No Layout section. Using the first Screen section.
19 [ 29.516] (==) No screen section available. Using defaults.
20 [ 29.516] (**) |-->Screen "Default Screen Section" (0)
21 [ 29.516] (**) | |-->Monitor "<default monitor>"
22 [ 29.517] (==) No monitor specified for screen "Default Screen Section".
23 Using a default monitor configuration.
24 [ 29.517] (==) Automatically adding devices
25 [ 29.517] (==) Automatically enabling devices
26 [ 29.554] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
27 [ 29.554] Entry deleted from font path.
28 [ 29.604] (==) FontPath set to:
29 /usr/share/fonts/misc/,
30 /usr/share/fonts/TTF/,
31 /usr/share/fonts/Type1/,
32 /usr/share/fonts/100dpi/,
33 /usr/share/fonts/75dpi/
34 [ 29.604] (==) ModulePath set to "/usr/lib/xorg/modules"
35 [ 29.604] (II) The server relies on udev to provide the list of input devices.
36 If no devices become available, reconfigure udev or disable AutoAddDevices.
37 [ 29.604] (II) Loader magic: 0x7c8b00
38 [ 29.604] (II) Module ABI versions:
39 [ 29.604] X.Org ANSI C Emulation: 0.4
40 [ 29.604] X.Org Video Driver: 12.0
41 [ 29.604] X.Org XInput driver : 16.0
42 [ 29.604] X.Org Server Extension : 6.0
43 [ 29.606] (--) PCI:*(0:1:0:0) 10de:0a3c:17aa:2145 rev 162, Mem @ 0xcc000000/16777216, 0xd0000000/268435456, 0xce000000/335544 32, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
44 [ 29.606] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
45 [ 29.606] (II) LoadModule: "extmod"
46 [ 29.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
47 [ 29.632] (II) Module extmod: vendor="X.Org Foundation"
48 [ 29.632] compiled for 1.12.3, module version = 1.0.0
49 [ 29.632] Module class: X.Org Server Extension
50 [ 29.632] ABI class: X.Org Server Extension, version 6.0
51 [ 29.632] (II) Loading extension MIT-SCREEN-SAVER
52 [ 29.632] (II) Loading extension XFree86-VidModeExtension
53 [ 29.632] (II) Loading extension XFree86-DGA
54 [ 29.632] (II) Loading extension DPMS
55 [ 29.632] (II) Loading extension XVideo
56 [ 29.632] (II) Loading extension XVideo-MotionCompensation
57 [ 29.632] (II) Loading extension X-Resource
58 [ 29.632] (II) LoadModule: "dbe"
59 [ 29.632] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
60 [ 29.640] (II) Module dbe: vendor="X.Org Foundation"
61 [ 29.640] compiled for 1.12.3, module version = 1.0.0
62 [ 29.640] Module class: X.Org Server Extension
63 [ 29.640] ABI class: X.Org Server Extension, version 6.0
64 [ 29.640] (II) Loading extension DOUBLE-BUFFER
65 [ 29.640] (II) LoadModule: "glx"
66 [ 29.641] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
67 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
68 [ 30.719] compiled for 4.0.2, module version = 1.0.0
69 [ 30.719] Module class: X.Org Server Extension
70 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
71 [ 30.719] (II) Loading extension GLX
72 [ 30.719] (II) LoadModule: "record"
73 [ 30.720] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
74 [ 30.727] (II) Module record: vendor="X.Org Foundation"
75 [ 30.727] compiled for 1.12.3, module version = 1.13.0
76 [ 30.727] Module class: X.Org Server Extension
77 [ 30.727] ABI class: X.Org Server Extension, version 6.0
78 [ 30.727] (II) Loading extension RECORD
79 [ 30.727] (II) LoadModule: "dri"
80 [ 30.727] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
81 [ 30.747] (II) Module dri: vendor="X.Org Foundation"
82 [ 30.747] compiled for 1.12.3, module version = 1.0.0
83 [ 30.747] ABI class: X.Org Server Extension, version 6.0
84 [ 30.747] (II) Loading extension XFree86-DRI
85 [ 30.747] (II) LoadModule: "dri2"
86 [ 30.747] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
87 [ 30.751] (II) Module dri2: vendor="X.Org Foundation"
88 [ 30.751] compiled for 1.12.3, module version = 1.2.0
89 [ 30.751] ABI class: X.Org Server Extension, version 6.0
90 [ 30.751] (II) Loading extension DRI2
91 [ 30.751] (==) Matched nouveau as autoconfigured driver 0
92 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
93 [ 30.751] (==) Matched nv as autoconfigured driver 2
94 [ 30.751] (==) Matched vesa as autoconfigured driver 3
95 [ 30.751] (==) Matched fbdev as autoconfigured driver 4
96 [ 30.751] (==) Assigned the driver to the xf86ConfigLayout
97 [ 30.751] (II) LoadModule: "nouveau"
98 [ 30.800] (WW) Warning, couldn't open module nouveau
99 [ 30.800] (II) UnloadModule: "nouveau"
100 [ 30.800] (II) Unloading nouveau
101 [ 30.800] (EE) Failed to load module "nouveau" (module does not exist, 0)
102 [ 30.800] (II) LoadModule: "nvidia"
103 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
104 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
105 [ 30.902] compiled for 4.0.2, module version = 1.0.0
106 [ 30.902] Module class: X.Org Video Driver
107 [ 30.942] (II) LoadModule: "nv"
108 [ 30.943] (WW) Warning, couldn't open module nv
109 [ 30.943] (II) UnloadModule: "nv"
110 [ 30.943] (II) Unloading nv
111 [ 30.943] (EE) Failed to load module "nv" (module does not exist, 0)
112 [ 30.943] (II) LoadModule: "vesa"
113 [ 30.943] (WW) Warning, couldn't open module vesa
114 [ 30.943] (II) UnloadModule: "vesa"
115 [ 30.943] (II) Unloading vesa
116 [ 30.943] (EE) Failed to load module "vesa" (module does not exist, 0)
117 [ 30.943] (II) LoadModule: "fbdev"
118 [ 30.943] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
119 [ 30.957] (II) Module fbdev: vendor="X.Org Foundation"
120 [ 30.957] compiled for 1.12.2, module version = 0.4.3
121 [ 30.957] Module class: X.Org Video Driver
122 [ 30.957] ABI class: X.Org Video Driver, version 12.0
123 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
124 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
125 [ 30.958] (II) FBDEV: driver for framebuffer: fbdev
126 [ 30.958] (++) using VT number 7
127
128 [ 30.964] (II) Loading sub module "fb"
129 [ 30.964] (II) LoadModule: "fb"
130 [ 30.964] (II) Loading /usr/lib/xorg/modules/libfb.so
131 [ 30.979] (II) Module fb: vendor="X.Org Foundation"
132 [ 30.979] compiled for 1.12.3, module version = 1.0.0
133 [ 30.979] ABI class: X.Org ANSI C Emulation, version 0.4
134 [ 30.980] (II) Loading sub module "wfb"
135 [ 30.980] (II) LoadModule: "wfb"
136 [ 30.980] (II) Loading /usr/lib/xorg/modules/libwfb.so
137 [ 30.988] (II) Module wfb: vendor="X.Org Foundation"
138 [ 30.988] compiled for 1.12.3, module version = 1.0.0
139 [ 30.988] ABI class: X.Org ANSI C Emulation, version 0.4
140 [ 30.988] (II) Loading sub module "ramdac"
141 [ 30.988] (II) LoadModule: "ramdac"
142 [ 30.988] (II) Module "ramdac" already built-in
143 [ 31.014] (WW) Falling back to old probe method for fbdev
144 [ 31.014] (II) Loading sub module "fbdevhw"
145 [ 31.014] (II) LoadModule: "fbdevhw"
146 [ 31.015] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
147 [ 31.031] (II) Module fbdevhw: vendor="X.Org Foundation"
148 [ 31.031] compiled for 1.12.3, module version = 0.0.2
149 [ 31.031] ABI class: X.Org Video Driver, version 12.0
150 [ 31.031] (EE) open /dev/fb0: No such file or directory
151 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
152 "Default Screen Section" for depth/fbbpp 24/32
153 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
154 [ 31.031] (==) NVIDIA(0): RGB weight 888
155 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
156 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
157 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
158 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
159 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
160 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
161 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
162 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
163 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
164 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
165 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
166 [ 32.673] (--) NVIDIA(0): CRT-0
167 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
168 [ 32.673] (--) NVIDIA(0): DFP-1
169 [ 32.673] (--) NVIDIA(0): DFP-2
170 [ 32.673] (--) NVIDIA(0): DFP-3
171 [ 32.673] (--) NVIDIA(0): DFP-4
172 [ 32.673] (--) NVIDIA(0): DFP-5
173 [ 32.673] (--) NVIDIA(0): DFP-6
174 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
175 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
176 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
177 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
178 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
179 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
180 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
181 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
182 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
183 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
184 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
185 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
186 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
187 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
188 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
189 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
190 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
191 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
192 [ 32.674] (==) NVIDIA(0):
193 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
194 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
195 [ 32.674] (==) NVIDIA(0):
196 [ 32.675] (II) NVIDIA(0): Validated modes:
197 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
198 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
199 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
200 [ 33.739] (--) NVIDIA(0): option
201 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
202 [ 33.739] (WW) NVIDIA(0): UBB.
203 [ 33.739] (II) UnloadModule: "fbdev"
204 [ 33.739] (II) Unloading fbdev
205 [ 33.739] (II) UnloadSubModule: "fbdevhw"
206 [ 33.739] (II) Unloading fbdevhw
207 [ 33.739] (--) Depth 24 pixmap format is 32 bpp
208 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
209 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
210 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
211 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
212 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
213 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
214 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
215 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
216 [ 33.744] (II) NVIDIA(0): Config Options in the README.
217 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
218 [ 34.063] (II) Loading extension NV-GLX
219 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
220 [ 34.122] (==) NVIDIA(0): Backing store disabled
221 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
222 [ 34.122] (==) NVIDIA(0): DPMS enabled
223 [ 34.123] (II) Loading extension NV-CONTROL
224 [ 34.123] (II) Loading extension XINERAMA
225 [ 34.123] (II) Loading sub module "dri2"
226 [ 34.123] (II) LoadModule: "dri2"
227 [ 34.123] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
228 [ 34.123] (II) Module dri2: vendor="X.Org Foundation"
229 [ 34.123] compiled for 1.12.3, module version = 1.2.0
230 [ 34.123] ABI class: X.Org Server Extension, version 6.0
231 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
232 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
233 [ 34.123] (--) RandR disabled
234 [ 34.123] (II) Initializing built-in extension Generic Event Extension
235 [ 34.123] (II) Initializing built-in extension SHAPE
236 [ 34.123] (II) Initializing built-in extension MIT-SHM
237 [ 34.123] (II) Initializing built-in extension XInputExtension
238 [ 34.123] (II) Initializing built-in extension XTEST
239 [ 34.123] (II) Initializing built-in extension BIG-REQUESTS
240 [ 34.123] (II) Initializing built-in extension SYNC
241 [ 34.123] (II) Initializing built-in extension XKEYBOARD
242 [ 34.123] (II) Initializing built-in extension XC-MISC
243 [ 34.124] (II) Initializing built-in extension SECURITY
244 [ 34.124] (II) Initializing built-in extension XINERAMA
245 [ 34.124] (II) Initializing built-in extension XFIXES
246 [ 34.124] (II) Initializing built-in extension RENDER
247 [ 34.124] (II) Initializing built-in extension RANDR
248 [ 34.124] (II) Initializing built-in extension COMPOSITE
249 [ 34.124] (II) Initializing built-in extension DAMAGE
250 [ 34.126] (II) Initializing extension GLX
251 [ 34.689] (II) config/udev: Adding input device Power Button (/dev/input/event3)
252 [ 34.689] (**) Power Button: Applying InputClass "evdev keyboard catchall"
253 [ 34.689] (II) LoadModule: "evdev"
254 [ 34.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
255 [ 34.704] (II) Module evdev: vendor="X.Org Foundation"
256 [ 34.704] compiled for 1.12.3, module version = 2.7.1
257 [ 34.704] Module class: X.Org XInput Driver
258 [ 34.704] ABI class: X.Org XInput driver, version 16.0
259 [ 34.704] (II) Using input driver 'evdev' for 'Power Button'
260 [ 34.704] (**) Power Button: always reports core events
261 [ 34.704] (**) evdev: Power Button: Device: "/dev/input/event3"
262 [ 34.704] (--) evdev: Power Button: Vendor 0 Product 0x1
263 [ 34.704] (--) evdev: Power Button: Found keys
264 [ 34.704] (II) evdev: Power Button: Configuring as keyboard
265 [ 34.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
266 [ 34.704] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
267 [ 34.704] (**) Option "xkb_rules" "evdev"
268 [ 34.704] (**) Option "xkb_model" "evdev"
269 [ 34.704] (**) Option "xkb_layout" "us"
270 [ 34.727] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
271 [ 34.727] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
272 [ 34.727] (II) Using input driver 'evdev' for 'Video Bus'
273 [ 34.727] (**) Video Bus: always reports core events
274 [ 34.727] (**) evdev: Video Bus: Device: "/dev/input/event4"
275 [ 34.728] (--) evdev: Video Bus: Vendor 0 Product 0x6
276 [ 34.728] (--) evdev: Video Bus: Found keys
277 [ 34.728] (II) evdev: Video Bus: Configuring as keyboard
278 [ 34.728] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/ev ent4"
279 [ 34.728] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
280 [ 34.728] (**) Option "xkb_rules" "evdev"
281 [ 34.728] (**) Option "xkb_model" "evdev"
282 [ 34.728] (**) Option "xkb_layout" "us"
283 [ 34.728] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
284 [ 34.728] (II) No input driver specified, ignoring this device.
285 [ 34.728] (II) This device may have been added with another device file.
286 [ 34.729] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
287 [ 34.729] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
288 [ 34.729] (II) Using input driver 'evdev' for 'Sleep Button'
289 [ 34.729] (**) Sleep Button: always reports core events
290 [ 34.729] (**) evdev: Sleep Button: Device: "/dev/input/event2"
291 [ 34.729] (--) evdev: Sleep Button: Vendor 0 Product 0x3
292 [ 34.729] (--) evdev: Sleep Button: Found keys
293 [ 34.729] (II) evdev: Sleep Button: Configuring as keyboard
294 [ 34.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
295 [ 34.729] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
296 [ 34.729] (**) Option "xkb_rules" "evdev"
297 [ 34.729] (**) Option "xkb_model" "evdev"
298 [ 34.729] (**) Option "xkb_layout" "us"
299 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
300 [ 34.730] (II) No input driver specified, ignoring this device.
301 [ 34.730] (II) This device may have been added with another device file.
302 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
303 [ 34.730] (II) No input driver specified, ignoring this device.
304 [ 34.730] (II) This device may have been added with another device file.
305 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
306 [ 34.731] (II) No input driver specified, ignoring this device.
307 [ 34.731] (II) This device may have been added with another device file.
308 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
309 [ 34.731] (II) No input driver specified, ignoring this device.
310 [ 34.731] (II) This device may have been added with another device file.
311 [ 34.732] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
312 [ 34.732] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
313 [ 34.732] (II) Using input driver 'evdev' for 'Integrated Camera'
314 [ 34.732] (**) Integrated Camera: always reports core events
315 [ 34.732] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
316 [ 34.732] (--) evdev: Integrated Camera: Vendor 0x17ef Product 0x480f
317 [ 34.732] (--) evdev: Integrated Camera: Found keys
318 [ 34.732] (II) evdev: Integrated Camera: Configuring as keyboard
319 [ 34.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input6/event6"
320 [ 34.732] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
321 [ 34.732] (**) Option "xkb_rules" "evdev"
322 [ 34.732] (**) Option "xkb_model" "evdev"
323 [ 34.732] (**) Option "xkb_layout" "us"
324 [ 34.732] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
325 [ 34.732] (II) No input driver specified, ignoring this device.
326 [ 34.732] (II) This device may have been added with another device file.
327 [ 34.733] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
328 [ 34.733] (II) No input driver specified, ignoring this device.
329 [ 34.733] (II) This device may have been added with another device file.
330 [ 34.733] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
331 [ 34.733] (II) No input driver specified, ignoring this device.
332 [ 34.733] (II) This device may have been added with another device file.
333 [ 34.734] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
334 [ 34.734] (II) No input driver specified, ignoring this device.
335 [ 34.734] (II) This device may have been added with another device file.
336 [ 34.734] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
337 [ 34.734] (II) No input driver specified, ignoring this device.
338 [ 34.734] (II) This device may have been added with another device file.
339 [ 34.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
340 [ 34.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
341 [ 34.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
342 [ 34.735] (**) AT Translated Set 2 keyboard: always reports core events
343 [ 34.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
344 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
345 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
346 [ 34.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
347 [ 34.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
348 [ 34.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
349 [ 34.735] (**) Option "xkb_rules" "evdev"
350 [ 34.735] (**) Option "xkb_model" "evdev"
351 [ 34.735] (**) Option "xkb_layout" "us"
352 [ 34.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
353 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
354 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
355 [ 34.736] (II) LoadModule: "synaptics"
356 [ 34.736] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
357 [ 34.757] (II) Module synaptics: vendor="X.Org Foundation"
358 [ 34.757] compiled for 1.12.2, module version = 1.6.2
359 [ 34.757] Module class: X.Org XInput Driver
360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
363 [ 34.757] (**) Option "Device" "/dev/input/event8"
364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
371 [ 34.758] (**) Option "TapButton1" "1"
372 [ 34.758] (**) Option "TapButton2" "2"
373 [ 34.758] (**) Option "TapButton3" "3"
374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
359 [ 34.757] Module class: X.Org XInput Driver
360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
363 [ 34.757] (**) Option "Device" "/dev/input/event8"
364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
371 [ 34.758] (**) Option "TapButton1" "1"
372 [ 34.758] (**) Option "TapButton2" "2"
373 [ 34.758] (**) Option "TapButton3" "3"
374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
375 [ 34.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
376 [ 34.758] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
377 [ 34.758] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
378 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
379 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
380 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
381 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
382 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
383 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
384 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
385 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
386 [ 34.758] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
387 [ 34.758] (II) No input driver specified, ignoring this device.
388 [ 34.758] (II) This device may have been added with another device file.
389 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
390 [ 34.759] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
391 [ 34.759] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
392 [ 34.759] (**) TPPS/2 IBM TrackPoint: always reports core events
393 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
394 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
395 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
396 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
397 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
398 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
399 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
400 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
401 [ 34.759] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input18/event18"
402 [ 34.759] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
403 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
404 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
405 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
406 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
407 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
408 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
409 [ 34.759] (II) No input driver specified, ignoring this device.
410 [ 34.759] (II) This device may have been added with another device file.
411 [ 34.759] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
412 [ 34.759] (II) No input driver specified, ignoring this device.
413 [ 34.759] (II) This device may have been added with another device file.
414 [ 34.760] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
415 [ 34.760] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
416 [ 34.760] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
417 [ 34.760] (**) ThinkPad Extra Buttons: always reports core events
418 [ 34.760] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
419 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
420 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Found keys
421 [ 34.760] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
422 [ 34.760] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
423 [ 34.760] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
424 [ 34.760] (**) Option "xkb_rules" "evdev"
425 [ 34.760] (**) Option "xkb_model" "evdev"
426 [ 34.760] (**) Option "xkb_layout" "us"
427 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
428 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
429 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
430 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
431 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
432 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
433 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
434 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
435 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
436 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
437 [ 968.853] (II) evdev: Power Button: Close
438 [ 968.853] (II) UnloadModule: "evdev"
439 [ 968.873] (II) evdev: Video Bus: Close
440 [ 968.873] (II) UnloadModule: "evdev"
441 [ 968.893] (II) evdev: Sleep Button: Close
442 [ 968.893] (II) UnloadModule: "evdev"
443 [ 968.896] (II) evdev: Integrated Camera: Close
444 [ 968.896] (II) UnloadModule: "evdev"
445 [ 968.896] (II) evdev: AT Translated Set 2 keyboard: Close
446 [ 968.897] (II) UnloadModule: "evdev"
447 [ 968.897] (II) UnloadModule: "synaptics"
448 [ 968.897] (II) evdev: TPPS/2 IBM TrackPoint: Close
449 [ 968.897] (II) UnloadModule: "evdev"
450 [ 968.898] (II) evdev: ThinkPad Extra Buttons: Close
451 [ 968.898] (II) UnloadModule: "evdev"
452 [ 969.425] Server terminated successfully (0). Closing log file.
A case insensitive grep of nvidia on the previous log file (Xorg.0.log)
1 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
2 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
3 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
4 [ 30.800] (II) LoadModule: "nvidia"
5 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
6 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
7 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
8 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
9 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
10 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
11 [ 31.031] (==) NVIDIA(0): RGB weight 888
12 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
13 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
14 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
15 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
16 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
17 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
18 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
19 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
20 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
21 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
22 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
23 [ 32.673] (--) NVIDIA(0): CRT-0
24 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
25 [ 32.673] (--) NVIDIA(0): DFP-1
26 [ 32.673] (--) NVIDIA(0): DFP-2
27 [ 32.673] (--) NVIDIA(0): DFP-3
28 [ 32.673] (--) NVIDIA(0): DFP-4
29 [ 32.673] (--) NVIDIA(0): DFP-5
30 [ 32.673] (--) NVIDIA(0): DFP-6
31 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
32 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
33 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
34 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
35 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
36 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
37 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
38 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
39 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
40 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
41 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
42 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
43 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
44 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
45 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
46 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
47 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
48 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
49 [ 32.674] (==) NVIDIA(0):
50 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
51 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
52 [ 32.674] (==) NVIDIA(0):
53 [ 32.675] (II) NVIDIA(0): Validated modes:
54 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
55 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
56 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
57 [ 33.739] (--) NVIDIA(0): option
58 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
59 [ 33.739] (WW) NVIDIA(0): UBB.
60 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
61 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
62 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
63 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
64 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
65 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
66 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
67 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
68 [ 33.744] (II) NVIDIA(0): Config Options in the README.
69 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
70 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
71 [ 34.122] (==) NVIDIA(0): Backing store disabled
72 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
73 [ 34.122] (==) NVIDIA(0): DPMS enabled
74 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
75 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
76 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
77 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
78 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
79 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
80 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
81 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
82 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
83 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
84 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
85 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
86 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
87 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
88 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
89 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
.xsession-errors (Note it was compressed a bit since a lot of the lines were the same)
1 /etc/gdm/Xsession: Beginning session setup...
2 localuser:hal being added to access control list
3 /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
4 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
5 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
6 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
7 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
8 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
9 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
10 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
11 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
12 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
13 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
14 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
15 Initializing tracker-store...
16 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
17 Failed to play sound: File or data not found
18
19 ** (nm-applet:1443): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unkno wn return code 1
20 ** Message: applet now removed from the notification area
21
22 ** (nm-applet:1443): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown ret urn code 1.
23
24 ** (nm-applet:1443): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
25 Initializing tracker-miner-fs...
26 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-miner-fs.cfg'
27 Starting log:
28 File:'/home/hal/.local/share/tracker/tracker-miner-fs.log'
29 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
30 Starting log:
31 File:'/home/hal/.local/share/tracker/tracker-store.log'
32 Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
33 ** Message: applet now embedded in the notification area
34 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
35 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
36 Window manager warning: Log level 16: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknow n return code 1.
37 Window manager warning: Log level 16: _nm_remote_settings_ensure_inited: (NMRemoteSettings) error initializing: Launch helper e xited with unknown return code 1
38
39 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
40 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
41 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
42
43 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
44 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
45 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
46
47 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
48 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
49 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
50
51 (evolution:3988): evolution-network-manager-WARNING **: network_manager_query_state: GDBus.Error:org.freedesktop.DBus.Error.Spa wn.ChildExited: Launch helper exited with unknown return code 1
52 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
53 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
>>> 54-3722 open: No such file or directory
3723 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3724 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3725 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3726 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3727 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3728 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3729 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3730 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3731 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3732 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3733 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3734 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3735 Window manager warning: Log level 8: _shell_embedded_window_unrealize: assertion `SHELL_IS_EMBEDDED_WINDOW (window)' failed
3736 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3737 Window manager warning: Got a request to focus 0x2000016 (Inbox (232) with a timestamp of 0. This shouldn't happen!
3738 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3739 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3740 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3741 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3742 PolicyKit daemon disconnected from the bus.
3743 We are no longer a registered authentication agent.
3744 [1337117088,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provi ded by the application
3745 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3746 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3747 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3748 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
3749 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
3750 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3751 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3752 ** Message: Got disconnected from the system message bus; retrying to reconnect every 10 seconds
3753 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3754 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3755 Window manager warning: Got a request to focus 0x1c00005 (hal@pluto:) with a timestamp of 0. This shouldn't happen!
3756 ** Message: applet now removed from the notification area
3757 gnome-session[1367]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3758
3759
3760 (gnome-shell-calendar-server:1486): Gdk-WARNING **: gnome-shell-calendar-server: Fatal IO error 11 (Resource temporarily unavai lable) on X server :0.
3761
3762
3763 (nm-applet:1443): Gdk-WARNING **: nm-applet: Fatal IO error 2 (No such file or directory) on X server :0.
3764
3765
3766 (gnome-screensaver:1452): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server : 0.
3767
3768 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3769
3770 (gnome-settings-daemon:4503): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3771
3772
3773 (gnome-terminal:4345): Gdk-WARNING **: gnome-terminal: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3774
3775 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3776
3777 Received signal:15->'Terminated'
3778 OK
3779There is one thing I forgot to clarify, have setup up the pc as a server so I do not have direct access to the server. Everything is forwarded over ssh (using nx to connect to the server and start a gnome session). Starting KiTTY (a modification of PuTTY) with x11 forwarding I do not see any windows when I run "xinit -- /usr/bin/X -nolisten tcp". I get the following:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
Kernel command line: root=/dev/sda1 ro
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:47:36 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
xinit: Unable to run program "xterm": No such file or directory
Specify a program on the command line or make sure that /usr/bin
is in your path.
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
startx gives something similar:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
Kernel command line: root=/dev/sda1 ro
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:52:11 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
/etc/X11/xinit/xinitrc: line 52: twm: command not found
/etc/X11/xinit/xinitrc: line 53: xclock: command not found
/etc/X11/xinit/xinitrc: line 54: xterm: command not found
/etc/X11/xinit/xinitrc: line 56: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 55: xterm: command not found
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
I remember when I would start the pc that startx I could never get to run, I would always start the gui using gdm, which was the only thing I could get to work. I do not have a .xinitrc. I believe the nx connects and issues gnome-session to start the session but I am not sure. -
Getting stuck in Headphone mode not necessarily a hardware issue, is it?
I've read on the net that cleaning the headphone jack can correct this issue. I've also read that inserting the headphones and removing them many times (I think I've seen 7 or 8 times) can also correct the issue. None of these issues worked for me.
What I did notice is that the presence of my headphones was indeed being detected. With the headphones plugged-in, I set the volume to a low volume, for example. With the headphones removed, I set the volume near maximum. Mind you, the phone is in Headphone mode, and won't normally play out of the speaker. But when you insert the headphones, in this example, the volume jumps to the low setting, and when the headphones are removed, the volume jumps to the near maximum setting.
So insertion and removal of the headphones is indeed detected. So this isn't a hardware issue, then, is it? There's got to be something else going on.Well, I backed up, erased, and restored to get proper functionality. No longer stuck in headphone mode. I tried compressed air, and cleaning the jack. Those attempts didn't fix me. I believe it's just a bug that will eventually get fixed, or a setting that will reset the logic associated with the headphone.
-
Ipod touch 5g stuck on headphone mode help
my little brother ipod is stuck on headphones mode n the music wont play at all but in ringtones it shows the ringtone on speaker but other then that the music wont play outloud or siri wont talk nothingg help me please what do i do to fix this?????
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar -
IPhone4 - Stuck in Headphone mode
Ok, My iPhone4 is completely stuck in headphone mode.
It was in my pocket today and it did get slightly damp (freaking rain).
any-case, I really do not know what to do, I've tried using compressed air to blow into the jack etc, No luck.
Restoring. No luck.
Rebooting. No luck..
What should I do?Randomphil,
Same issue here. It looked like most of the fixes for this problem you see out there were posted by owners of the iphone 3 & earlier, and none of them worked on my 4 -- not to mention, I hadn't put headphones in since the last time I used the onboard speaker. I think the issue was actually fixed with the 4 as I never have had this problem until now, despite using various non-iPhone headphones for months now.
My phone was in my glove box for a few hours during a foggy day, and when I got back to the car, a small amount of condensation appeared on it when I was handling it - probably due to the quick temperature increase from nearly freezing to being in my hands. Now that I've had time to think clearly instead of rushing to my phone, I realize that, yes, this commonly happens with electronics, even if you're not getting them wet, the condensation in the air can quickly soak into your phone - especially during a rapid temperature change - and cause potential issues, although they are usually minor. Need to allow time for the moisture to dry before using the phone.
I saw your comment yesterday and decided to give it a try. About 3 hours in a tightly sealed bag of rice seems to have wicked out all the moisture, and it works fine now.
Thanks! -
Why is my iPod stuck in headphones mode? How can I change it?
I was taking a shower and I had my iPod next to the shower playing music. When I came out as soon as I turned of the music it was stuck in headphones mode. What happened?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
Intermittent SOS error, radio off or stuck in gsm mode
Hi guys, been lurking the forums since I got my curve but never really posted. I have done tons of searches on crackberry, google, and support forums but no real answer yet.
I have an 8310 from AT&T but it is unlocked and being used with Rogers complete with data and BB services. Current firmware is 4.5.0.163 (257) from vodafone (updated last week or so)
Previously the phone would be stuck in SOS mode for unknown periods of time. To resolve the problem I would go to "manage connections" and turn on/off the connection and hope it will work again. Other times I would hit the phone leg or the desk and do a battery pull (quick pull lite), sometimes it will work again. I took apart the phone and the antenna contacts do not look as good as they could. Signs of wear on the antenna as well as the contacts on the board. Some of the copper has worn off the contacts.
I swapped chassis with another 8310 I had laying around with a broken usb port. The problem went away and I assumed it was fixed. Just last night the phone went into GSM mode again. I did the same steps I had mentioned before and it started to work again.
I have also tried registering the "host tables" and manually setting the mobile network.I have another chassis and antenna on order as we speak.
I also plan to apply a thin layer of solder to the contacts on the main board (the part that touches the antenna).I was wondering if anyone has any other troubleshooting tips for advice for me.
I love this curve and I really don't want to change to another modelAny tips or suggestions would be greatly appreciated.
Message Edited by BlackCRX on 10-04-2009 05:14 PMWelcome to the forums
Here is some info on the SOS error: http://www.blackberry.com/btsc/KB03448
If you have faulty SIM card, your provider should replace it for you at no cost (usually). Other hardware problems cannot be fixed unless you are an electrical wizz and know what you are doing...getting a replacement would be your best bet if this is the case.
Hope the info helps. Keep us posted!
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks
Maybe you are looking for
-
IPhone 4S won't connect to wifi E2500
When I try to connect new iPhone 4S, it goes to the page for all the info (IP address, etc.) instead of just asking for the password input. I've tried disconnecting router and restarting, plugging iPhone into iMac laptop, etc. (PC is hardwired into s
-
Hello all, My company decided to migrate all our web services to the new OSB and guess how they chose to get this up and running... It means I will be around bothering you guys for while... =D Well, I'm building a prove of concept using a simple rece
-
Hands on Lab JD Edwards Enterprise One Business Service Development
Hi, I completed the "Oracle Open World 2008 - Hands on Lab JD Edwards Enterprise One Business Service Development" PDF at [http://www.oracle.com/technology/tech/fmw4apps/jde/pdf/openworld08_businessservicedevelopment.pdf]. I ran the business service
-
Showcase your personal brand in the classroom. View this quick turorial to discover how InDesign can help you create an amazing presentation. http://adobe.ly/OcYjGv
-
Currency with Comma -- Unable to multiply
Hi all I am having a Amount Field(with comma as Unit separator like 1,010) saved in Char Field. Now I neeed to multiply this Amount Field with X number. When there is no comma (like 300.00), then amount is succeesfully multipled but when I have am