Stuck Key & Error Message

Thinkpad T410i windows 7.  Getting a stuck key 4D message on startup, can boot just by pressing escape twice, but then getting a persistent and intermittent / random error message pop up.  The error message is blank and contains no information other than the word Error.  My keyboard seems fine, no jammed keys.
Any ideas?
Solved!
Go to Solution.

Think I found the solution myself: seemed to be some kind of conflict with MobileMe control panel, so maybe something to do with syncing and nothing to do with the keyboard.  Uninstalled the programme and the problem is solved.

Similar Messages

  • Rejects new cartridges and stuck in error message mode

    Mac OS X 10.6.8        My HP Officejet Pro 8600 Plus won’t accept new printer cartridges (not the originals).  It also is stuck on an error message stating there’s a problem with ink cartridges and suggests turning printer off and on.  This has been done numerous times with no change.  Am trying to get to Setup menu to try resetting printer defaults.  Have also tried unplugging machine for 30 minutes with cartridges removed and restarting, then replacing cartridges.  It remains stuck on error message.  Wireless system. 

    Hello Janedra, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into cartridge issues, I would like to try and assist you with that today!
    Are the cartridges you are using HP genuine cartridges?  Have they been refilled or remanufactured?
    I would suggest running through this document: An 'Ink Cartridge Failure,' 'Incompatible Ink Cartridges,' or 'Ink Cartridge Problem' Error Message ....
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • "No Bootable Device -- insert a boot disk and press any key" Error Message.

    Last month I just got a HP netbook (HP Mini 110-3100) and when I got it from the box, the error message; "No bootable device -- insert a boot disk and press any key" appeared. But then I managed to boot up the netbook normally. After that, I can use the netbook normally but the error message keeps appeared and becomes more frequent and now I even cannot turn on the netbook. 
    Is it a hard disk failure? 
    p/s: yesterday accidentally I can turn on the netbook without any problems. Did a lot of Hard Disk Maintenance by some softwares downloaded from the internet. But now already cannot turn on. 
    p/s/s: i have no cd/dvd drive, and also no 8GB usb drive.
    p/s/s/s: what should i bring if i want to send the netbook to the HP centre? just bring the netbook?

    I would suggest try and reseat the hard drive and check...If you still have the issue, than take it to the service center...And you will need to take only netbook to Service center...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • IPad with retina is stuck on error message that iPad is unable to back up.  When hit ok, the message does not go away.  Cannot power down.  Don't have computer to sync with iTunes.  Now what?

    My coworker has a fairly new iPad with retina display.  She has an error message that the iPad has not been backed up and needs to back up when locked, on wifi, and connected to a power supply.  It has an ok button to acknowledge the message.  Every time she hits the ok button, the error message remains.  She is unable to power down because the error message stays at the top and disables the ability to use any other touch portions of the screen.  She tried using Siri to reboot, but Siri was of no help.  She just kept saying that she does not wear boots.  Holding the power button down for an extended period also did not help.  She does not have access to the computer that has her iTunes on it, so she cannot sync it via cable.  She also does not want to do a reset because she has several photos that she does not want to lose.  What can she do?

    Try holding the Home and Power keys at the same time for approx 10 seconds or until the Apple logo appears, this will 'reset' the device - it won't lose any data doing this, let us know how you get on.
    Regards,
    Steve

  • Routing key error message when downloaing itunes.

    when i download itunes it brngs up a error message saying that i dont have permission to a routing key. anyone have an idea on what to do?

    Try 2 solutions: 1.  Press both Ctrl and Shift keys then double click on ITunes.  Hold keys down until a box appears on screen indicating ITunes is starting in "safe mode'.  left click on 'continue" and ITunes will run without closing.
    2;  Start ITunes normally, then  after loading, choose "Match" and then touch "stop" beforre step 3 , Uploading songs...",  runs for more than a few seconds.  The code problems are in Match;  the uploading function in Match.  ITunes won't crash if you stop Match soon enough!

  • ESS  Bank Key Error Message

    Hello All,
    I want to customize ESS Bank application error message.Whe we don't enter input for routing number it gives the following message "Enter the bank key". I wanted to customize that error message. I could not locate it in WebDynpro  DC. Any input on this highly appreciated.
    Thanks
    VJ

    Hi,
    the error is coming from the Bapi, there will be a strandard error node in the bapi that will give the wd application to display the error, request the RFC developer to change in the back end,
    find out the node erroreturn in the model, and pass the information of RFC to the abap developer,
    otherwise, if you want to customize in WD application, you have to go to perticular method which is throughing the error and you can change there by calling ur own message from message pool.
    Cheers,
    Apparao.

  • Foreign Key Error Message ORA - 01430

    I have a table name LSU_INTER_RESOURCES_T. I would like to add a foreign key constraint with the following command:
    alter table lsu_inter_message_t
    add constraint inter_message_id_fk
    inter_request_id REFERENCES lsu_inter_requests_t(inter_request_id) ON DELETE CASCADE;
    The system returned the error message:
    ORA - 01430: column being added already exists.
    if I drop the column inter_request_id I will lose data and when I create the constraint it places the column at the end of the table. Losing data is not an issue now because the table has no data but down the line I can see that this will be a real real hassle.
    I would like to have the foreign key column defined in the sequence I chose when I designed the table layout. That is to say I want all of the key columns placed at the begining of the table row layout.
    Can I move the column after I define it and how is this done? Is this a 10g feature?
    Thank you, Ned

    Try
    alter table lsu_inter_message_t
    add constraint inter_message_id_fk
    foreign key(inter_request_id ) REFERENCES lsu_inter_requests_t(inter_request_id) ON DELETE CASCADE;

  • Screen stuck on error message.

    My phone was freezing, like it does once in a while, so i took the battery out to restart it and hopefully fix whatever was making it freeze stop. when i put the battery back in it went to the normal loading screen with the timer and everything and after a few seconds went to a white screen that only says "JUM Error 517" and then gives the option to reset the phone. pleasssse someone have something that can help!

    Use JL_Cmder to wipe the device.  Instructions here:
    http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    If that doesn't give you a "507" error then do this:
    http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
    Once you get the device to display 507 then reload the OS by following the instructions here (don't worry about what carrier the OS comes from--it makes no difference):
    http://www.blackberryforums.com/general-8100-series-discussion-pearl/233414-new-8130-os-v4-5-0-186-c...
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • CSCui75778 - C3945 stuck after error message VC_DMA-3-SR_ERROR

    is there any update ?

    hi,
    i would request yiu all to pay attention on this and help me out
    CALL FUNCTION 'RSD_IOBJ_INCL_ATR_NAV_GET'
        EXPORTING
          i_iobjnm       = i_iobjnm
          i_objvers      = rs_c_objvers-active
        IMPORTING
          e_s_cob_pro    = l_s_cob_pro
        EXCEPTIONS
          iobj_not_found = 1
          illegal_input  = 2.
      IF sy-subrc <> 0.
        MESSAGE x299(brain) WITH 'LRSDG_IOBJ_DB_READF40'
                                 'REGULAR_IOBJ_GET_FOR_META'.
      ENDIF.
    + time charact --> time dimension / In BEX not visible+*
      IF i_iobjnm = rsd_c_chanm-date OR
         i_iobjnm = rsd_c_timnm-calday.
        l_s_cob_pro-chasel     = rsd_c_chasl-not_allowed.
        l_s_cob_pro-chanav     = rsd_c_chanv-not_allowed.
    +*   from 3.0 these InfoObjects are marked as META objects+*
    +    l_s_cob_pro-iobjtp     = rsd_c_objtp-meta.+*
    +    the olap processor uses 0DATE / 0CALDAY as default for exceptional aggregation -+*
    +    therefore it has to be in the cobpro+*
    +    but it must not be of type META, since then day of validity logic+*
    +    does not work+*
    +    solution for 3.0: OLAP processor uses the flags CHASEL and CHANAV to determine+*
    +    if 0DATE / 0CALDAY is part of the infocube+**
    PLEASE HELP WITH SOME WORK AROUND
    sanjeev

  • Stuck on error message

    I'm trying to get rid of duplicate or unwanted files, but when I try to empty trash I get error 8003. What is it and how do I get rid of these files?

    KenRipley,
    Check thru this link trash problems.
    http://www.thexlab.com/faqs/faqs.html

  • When booting I get an Error 0210: Stuck Key 01 Lenovo Thinkpad

    Hello,
    When powering on I get this error 
    "Error 0210: Stuck Key 01
    Press <F1> to Setup" Please give your valuable suggestions. Thanks in advance. Sukumar

    Hi Sukumar,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that you are getting stuck key error in your Lenovo ThinkPad.
    Stuck key error means that one or more keys on the keyboard are stuck. It's possible that a liquid spill can also cause one or more keys to electrically "short" causing the error. Inspect the keyboard and check if any keys are mechanically stuck.
    If you're mechanically handy you can remove the keyboard, inspect any chances of damage or corrosion. Plug it back and see if error is still occurring.
    Reset BIOS to default settings. Perform Flee Power – remove the battery and any other peripheral device connected to the computer. Hold the power button for 10-15 seconds and then connect only the AC Adapter and turn ON the computer.
    If none of the above said helped to resolve your concern, I strongly recommend you to contact our technical support for assistance.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Best Regards,
    Mithun.

  • Getting "incorrect sync key" errors during iPhone setup

    First, i tried to "add a device" in the desktop Sunc window.
    Entered the simple key that my phone generated, and got a positive confirmation on the desktop.
    However, the phone showed a "incorrect sync key" error message, and no connection was made.
    Then, i tried it the other way around - through the phone app.
    I entered the sync key, connected, and got the "incorrect sync key" error as well. I tried this twice, just to make sure i didn't have a typo anywhere.
    Lastly, i generated a NEW sync key in Firefox. I then tried connecting BOTH WAYS all over again, always with the same "incorrect sync key" error appearing on the phone.
    It works neither way! Very frustrating...

    Resolved itself. I guess they were doing extensive maintenance over at Mozilla ... now it just went through as it should, and my iPhone is added to the list of devices.
    If you are experiencing similar problems, you can file a bug report - and read the latest status updates on maintenance - here: https://services.mozilla.com/status/

  • PO Approval stuck in error without any Error message

    Hi All,
    we have few notifications for PO Approval where they are stuck in error without any error message. they are also not showing in the worklist of the approver nor in the wf_notifications table. please help on this on how to solve this. we have done various options to solve the issue like skip/rewind/suspend/retry. but none of them works..... below is an extract of such an notification -
    Error in Workflow POAPPRV/3112-127925
    From SYSADMIN
    To Das, SD
    Sent 12-Dec-2011 16:55:01
    Closed 12-Dec-2011 17:07:30
    ID 164593
    Responder Das, SD
    An Error occurred in the following Workflow.
    Item Type = POAPPRV
    Item Key = 3112-127925
    User Key =429766-245
    Error Name =
    Error Message =
    Error Stack =
    Activity Id = 10770
    Activity Label = ROOT:POAPPRV_TOP
    Result Code = #STUCK
    Notification Id =
    Assigned User =
    Thanks,
    Sam D
    Edited by: Sam D on 12 Dec, 2011 1:45 PM

    Please post the details of the application release, database version and OS.
    Can you find any errors in the Workflow log file?
    All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [ID 1104843.1]
    Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [ID 225017.1]
    Also, search MOS for (POAPPRV stuck) and go through the docs.
    Thanks,
    Hussein

  • Error 0210: stuck key 2b - t61 thinkpad + windows 7 32 bit

    When ever I switch on the system i get this message error 0210: stuck key 2b". If I press esc key then it boots to the os windows 7 and also after booting up, if I open any ms word doc, the # key gets pressed automatically and I could see continous # characters getting typed in the doc. THis has started only after installing the w7 in my thinkpad. Can anyone suggest me if this is an os problem or keyboard failure. THis is repeating even after I clean the keypad and then turn on. This is happening in bios as well, I get a continous beep sound even in the bios as if some key is getting pressed all the time. So please let me know do I have to change the whole key board or just reseat the connection or something else is pending. Please help me, I am wondering why this problem has started immediately after I installed the window 7. If its an os problem, y am i getting the beep sound in bios, so i think its definetly not the os prob. Something wrong with the keys is it not. Any suggestions or tips are appreciated, I ran the HD diagnostic, it passed.
    THanks,
    Solved!
    Go to Solution.

    manu555,
    If this is occurring in BIOS as you note, that rules out anything having to do with the OS.   As GMAC-R60 suggests, this points to the keyboard being bad, or having a bad / intermittant connection to the system board, or something on the system board going bad.
    I would try:
    Checking the physical keyboard connection:
    Remove and unplug the keyboard - inspect the keyboard plug for any visible corrosion or damage.  Plug it back in carefully and try again.  If the problems are still occurring, then try..
    Clearing CMOS and resetting BIOS defaults - sometimes you get some stuck bit that causes an abnormal state:
    Remove battery & AC adapter.  Press and hold the power button several times for a count of 5 each time.   Re-attach AC and restart the computer.    Go into BIOS and reload factory defaults and save.  (there is a option to restore factory defaults).  Shut down.  Put in your battery and restart.
    Try replacing the keyboard - you can contact service and order a replacement keyboard outside of warranty, or source on from a local business partner (if there are warranty authorized resellers in your area, they will have the keyboard in stock, or be able to order it).   Or, check online sales - ebay, etc as you wish.
    If none of these steps resolve it, then my next suggestion would be the system board, but I think that is rather unlikely.
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • T 61 Stuck Key 01 error

    Hello there! 
       One of my co-workers is getting an error when booting up, it displays as:
    Error 
    0210: Stuck key 01
    Press <F1> to setup
    I tried pressing F1 and it won't let me continue into setup is there another way to fix this issue. 
    Please Advise!
    Kpav
    Kpav
    Solved!
    Go to Solution.

    Usually this type of message means that one or more keys on the keyboard are stuck in the down position. You might want to inspect the keyboard to see if any keys are mechanically stuck. It's also possible that a liquid spill has caused one or more keys to electrically "short" and look to the BIOS as if the key is stuck.
    If you're mechanically handy you can remove the keyboard for closer inspection and cleaning. The Hardware Maintenance Manual for the T61 series gives detailed instructions on removing/replacing the keyboard as well as the part numbers for replacement keyboards. You can find inexpensive used keyboards on eBay, etc.
    Incidentally this post made me smile. This sort of problem and message goes back to the first IBM PC. I recall getting a BIOS message like "Keyboard error: Press <F1> to continue." The message was issued because I'd forgotten to plug in the keyboard into the system unit. This is a silly message because if the keyboard is disconnected or broken how is the BIOS going to detect that you've pressed the F1, or any other, key?
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Maybe you are looking for