Stuck move

2013 0n-premise
Wouldn't you know my very last mailbox move from 2010 is stuck. I restarted the replication service on the 2010 side but still stuck. This is an important mailbox, how do you recommend I fix and move? The DB is is on it up and healthy. I even moved it to
another 2010 maul server but that didn't change anything.
Microsoft Exchange Error
Action 'Remove Move Request' could not be performed on object mailbox1.
mailbox1
Failed
Error:
Failed to communicate with the mailbox database.
MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=235]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=224][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropLogon [254]
    Lid: 17082   ROP Error: 0x80070005
    Lid: 26937 
    Lid: 21921   StoreEc: 0x80070005
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45112   StoreEc: 0x80070005
    Lid: 56872   dwParam: 0xFE
    Lid: 42712   StoreEc: 0x80070005
    Lid: 10786   dwParam: 0x0        Msg: 15.00.0913.000:CGD2EXCH01
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849 
    Lid: 21817   ROP Failure: 0x80070005
    Lid: 26297 
    Lid: 16585   StoreEc: 0x80070005
    Lid: 32441 
    Lid: 1706    StoreEc: 0x80070005
    Lid: 24761 
    Lid: 20665   StoreEc: 0x80070005
    Lid: 25785 
    Lid: 29881   StoreEc: 0x80070005
OK
can't cancel or resume this mailbox move.

Hi ,
Below mentioned command will remove the mailbox move request which is in completed state.
Get-MoveRequest -movestatus
completed | remove-moverequest
Note : In your case , I hope that particular mailbox move request is in the failed state ,then you need to use the below mentioned command.
Command to remove the
mailbox move request :
Remove-MoveRequest -Identity "[email protected]"Please feel free to reply me if you have any queries.
Thanks & Regards S.Nithyanandham

Similar Messages

  • Started movie download and its got stuck, think its cos i did a firmware

    I started movie download and at the same time did a firmware upgrade, the movie has stopped downloading and wont restart. A new download is working fine.
    How do I delete the stuck movie, and restart it as a new download
    Thanks

    I would let it finish if it's proceeding.  Then if they still aren't there, try restoring from backup again (by right-clicking on the name of your phone on the left panel of iTunes and selecting Restore from Backup, then choosing your most recent backup to restore from).  Suggest you go to iTunes preferences and on the Devices tab check "Prevent...from syncing automatically".  This will prevent iTunes from automatically syncing when you connect your phone and overwriting the backup you are trying to restore to.

  • No access to a saved movie???

    Here is the message i get when i try to open a file:
    "The project could not be opened, because the disk is full (no it isn't), the folder is locked (i unlocked the folders), or the folder permission are incorrect (I gave myself full permission)."
    I even saved a copy to the SHARED folder yet i still can't open this thing. I can't re-do it (ugh)
    Ahhhhhhhhhhhhhhhhh!!!!!!!!!!!!!
    any ideas??????
    thanks
    V

    Hi vfamily,
    Whenever I experience these weird problems I do like your doing. Submit the question to this forum and while I'm waiting I try different things (process of elimination). What comes to mind is opening the folder and clicking on one of the clip files. It should search for your movie and open it up to the time line. Control Click the imovie icon of your project. A drop down menu appears. Open "show package contents" Dbl. click one of the clips and see if anything happens.
    Another: Start new project. Once the editing screen comes on, Go to "File" select "Open Recent" Select your stuck movie.
    Also: "Repair Permissions", "Trash the Apple imovie plist," run "Disc Warrior"
    It's worth it to purchase "Disk Warrior" I've saved some projects with that. Also take the time to go through this forum and look for similar situations. I've gotten a lot of good advice just reading the answers to someone else's problems.
    Good luck.
    Tom L

  • Issues With Move Tool on Elements 12

    I have elements 12 on my windows 7 laptop. my problem is I open up a new project and open up any image or photoshop file to drag it over to add it to my project but the image does not transfer to the other project tab, it stays in the original tab. I can easily do it with elements 11 but I've had elements 12 since it came out and it's been a really frustrating problem as I want to be able to use elements 12 now instead. I've tried using holding down the control button and have tried looking around for this issue but so far I haven't seen anyone with this issue with a windows laptop, just Macs, please help!

    Originally Posted by sarsippius
    I had to move a user from one PO to another. The user opened their Groupwise only to find that all messages are gone. The folder structure is there, but no emails. The user database is still on the old server, and about 80% on the new server.
    I was able to look under Move Status, and it says 'Retry mailbox item retrieval.
    Any help would be greatly appreciated!
    There should be different options available in the user move status for that user, including the option to retry the entire move from the start. In many cases this is recoverable by retrying the move. Other options are possible if this fails.
    Before doing so, have a read through Tommy's cool solution & the Novell documentation (if not already done so) on the details of the move.
    ! Also make sure you have set both POA's to verbose logging so you can monitor the move messages from the sending as well as receiving end.
    A detailed article on moving users in GroupWise Communities ARTICLE: User Move Within GroupWise
    (looking at section 6.2 and on there are some tips/suggestions on how to handle stuck moves - reading the whole article will give a good overview and handle)
    Extra info:
    Novell docs on the move process (and preparations): Novell GroupWise 8 Documentation
    GroupWise Wiki with additional info : Moving GroupWise Users - CoolSolutionsWiki
    Hope that helps,
    Willem

  • HT1657 If I erase the movie before it has finished downloading, would you charge me the rental ?

    I'm having problems downloading movies to my ipad 1. My internet speed is great, and wifi works just fine.
    I have just found out that I can download them from my PC, and then tranfer them to the ipad. The only problem is that I have 2 stucked movies on ipad not downloading.
    If I erase those, would Apple charge me the rental? I would like to download them directly from the PC, where it works just fine.
    Thanks

    Welcome to the Apple Community.
    atravini wrote:
    .....If I erase those, would Apple charge me the rental?....
    Yes.
    Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

  • Tracking User Move

    Good day,
    It has been awhile since I have had to monitor a GroupWise system, my last customer migrated to Google, and I'm a bit out of practice. Basically I'm being asked to track an administrator's move of a GroupWise user, from one location to another, and I just want to double check the process for tracking a user move? Thank you
    -D

    Originally Posted by dschaldenovell
    Good day,
    It has been awhile since I have had to monitor a GroupWise system, my last customer migrated to Google, and I'm a bit out of practice. Basically I'm being asked to track an administrator's move of a GroupWise user, from one location to another, and I just want to double check the process for tracking a user move? Thank you
    -D
    Two places you can track what's happening:
    1) In the logs (make sure POA logging is set to verbose) of the source and destination PO.
    2) ConsoleOne, in the main menu bar select "Tools" > GroupWise Utilities > User Move Status.
    The first one will show more detail but will need to be monitored realtime and you also get other log items coming through at it's the general log. It's useful though to see how the move is progressing and how many items are still left to move and detail if any errors pop up.
    The second one if useful to see in which phase the move is in (the different stages of it's progress or move complete) and can also be used to nudge stuck moves or see which items are pending/stuck.
    Cheers,
    Willem

  • Problem w/Imov HD on New Imac

    Just bought a new 24 inch Imac for video editiing and after I stopped crying about the lack of options in Imovie08 I downloaded ImovieHD06. First video I edit is fine but the newest one that has lots of short clips and photos seems to get a hiccup while getting photos from the Iphoto library.
    You notice the issue when you select a photo and you get the preview screen. The picture in the window turns into a digital blob of lines and colors. It is at this point you cannot work with the movie. Ie: clips don't move right and the weird digital lines are in the storyline.
    I have tried to reinstall the Imovie HD but it does the same thing. Computer works like a dream besides this so I blame the software. Anyone have a clue?? When you buy a computer to do a task and you end up stuck on that task it is very frustrating. Love the computer besides this.
    btw- I moved the stuck movie on to my mac book and finished editing. It produced a great .mov file but when I used ON 2 Flix to compress to .flv it would not work. Had to save movie to mini dv disk on camera and reimport into Imovie 08. Very frustrating but it worked

    I experience the same problems with the WIFI connection.
    The SSID is hidden, and WEP encryption is enabled with a 128 hex key.
    I can connect to it manually by entering the ssid and key.
    The preferences are also saved in the system preferences on the networking prefpane.
    If I start up the computer again, or set it to sleep and wake it up again, the network connection is lost (which is normal) but it never connects back, like all my other macs.
    Any help with this?

  • A clean install on my MacBook Pro has left my icons stuck on the right side of the desktop. I want to move them but there is no 'None' option which I think would free them to move where I wish. Suggestions?

    A clean install on my MacBook Pro has left me with my icons stuck in the grid on the right side of my desktop. I had the ability to move them and have them stay put in various sectors of the desktop, which I found very useful.  The clean install upgraded the OS to 10.6.8 from 10.5.8. I want to move them again but there I see no 'None' option which I think would free them to move where I wish. Has the upgrade deleted that option? Suggestions? I am new to this community and if not new to Mac, I often feel that way. This is one of those times.
    Julz11 in NYC

    I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

  • Title Bar stuck under the Menu bar and I cannot select and move it.

    I often arrange windows around the desktop and sometimes I inadvertently push a window up too far and the title bar gets under the menu bar. Once I let go of the arrow, the title bar is too far under the menu bar and I can no longer reach it to move it down. The only solution is to close out the program and start over. Is there a way unbeknownst to me to select the title bar again and move it?
    Sharon

    My E*Trade streaming watch list was stuck under the Menu Bar also. I tried reseting the screen resolution down to 1280 x 1024, and restarting the MarketTrader. There on the display was the stuck window, out from under. I resized and moved it to a central location, and resized the display back to my normal 1920 setting. And to my relief, the window Bar! Thanks Discussion!

  • I can't move my application to navigate the tool bar. It is stuck under the Apple bar.

    I can't move my application to navigate the tool bar. It is stuck under the Apple bar. I have a screen shot of it if I can figure out how to upload it. I can navigate and move all other applications, I have restarted computer, updated Adobe. any advice.

    In that application what options are available to you under the Window menu item? Maybe something there that'll help?

  • I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors. My window is now "stuck" when I Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

    I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors with the presentation on monitor externally hooked up to my computer. My window is now "stuck" when I open Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves

    When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves. It finished backing up one then it went to a "Extracting Software" on the iTunes status bar up top and then it gave me an error saying something along the lines of "There was an error with the server" and back to square 1. Ive been trying since the morning and same problem. Always stuck on the backup, help?

    You may have lost your connection to the apple server or connection with your itunes library.
    1) You will need to shutdown Itunes and disconnect your iphone from the USB cable.
    2) Reconnect your Iphone to the usb cable, wait for the device to be recognised and or drivers to be installed.
    3) once all ok, your itunes should automatically open up/connect (if you have this setting set on), otherwise double click your itunes icon on your desktop.
    4) once all sychronised and connected. go to Summary tab and UPDATE your iphone again.
    Hope this works for you, as this happend to me and tried the above steps and wala!!! all good.
    If the above still fails, restart your pc/apple and turn off/on your modem and then try again.
    this normally happens if your connection from your device to the itunes hangs or looses its connection, or have a bad connection to the internet / apple server.
    in windows the RPC Locator is normally the cause of this, in apple i have no idea (as im not an apply user).
    Give it a shot!
    if this helps you and works ...why not rep/like my response up!

  • How do I move the alphabet keyboard on my iphone 5 iOS 8?  It is stuck on my DropBox app., I can't slide the keyboard down.

    As I open my DropBox App the keybioard appears adn prevents me from entering my password to access my DropBox content.  How do I move the alphabet keyboard on my iphone 5 iOS 8?  It is stuck on my DropBox app and I can't slide the keyboard down.

    Well, as an AT&T user, APN settings are governed by the carrier file, and we cannot change them. I've not used the configuration utility, so I'm "dumber" than you! See if this support document will help you out any. http://support.apple.com/kb/HT4839.

  • I recently did a restore to factory settings on my 2009 macbook and now im stuck on the welcome screen where u choose the country my trackpad allows me to move the arrow around but when i tap continue to choose it does nothing. someone please help

    I recently restored my 2009 macbook to factory settings and now its stuck on the welcome screen where u choose your country. My trackpad allows me to move the arrow around but when I tap on it to select continue it does nothing at all. The only thing else it will allow me to do is go thru the voice over tutorial by pressing escape. Please help me fix this I need to use my computer.

    Hi, teezbreezy64.
    I found a couple of resources to help troubleshoot the issue you are experiencing. The first is this article named Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues found here http://support.apple.com/kb/TS1248.
    Try disconnecting the MagSafe connector from the computer and check the trackpad function. If the trackpad becomes responsive again, improper grounding may be the issue.
    If a two-prong AC plug is being used with the power adapter, try using the three-prong power cable that shipped with your computer and plug it into a grounded outlet.
    If the issue persists, make sure the third prong is present and do not use an adapter to enable the three-prong adapter to be used in a two-prong outlet. Note that the ground in the three-prong outlet may not be connected. This is common in older homes or buildings with replaced outlets. In these situations, the three-prong power cable will not improve trackpad responsiveness.
    If a grounded outlet is not available, rest your palm on the palm rest when using the trackpad. This should enable the trackpad to function properly.
    If that does not resolve the issue then I recommend resetting the SMC on your computer. Here is an article on how to do that:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Regards,
    Jason H. 

  • While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Maybe you are looking for