Stuck on grey screen and wild fans

I just restarted my powermac G5 this morning after installing the ilife and keyboard updates and it gets stuck on the grey screen with grey apple and then the fans start winding up and the machine sounds like it's going to take off down the run way.
I have tried to start it a couple of times and the same thing happens, even disconnected the external drives and things with no luck.
can anyone have a solution? what s going on with it?

Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
If that doesn't do it, Try things in Apple doc.#106464 for your startup issue. The article says it is for 10.3.9 and down but it still applies to 10.4 systems.
Also, try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
Let us know what errors DU reports and if it was able to repair them.
Cheers!
DALE
Cheers!
DALE
Message was edited by: Dale Weisshaar

Similar Messages

  • Powermac G4 stuck on grey screen with loud fan nosie

    Hello,
    I wonder if anyone can help me.
    I have an old Powermac G4. 
    On starting up, the chime sounds and the screen turns to grey and shortly after the apple symbol appears as per normal.
    However, it then remains stuck on this screen and shortly after the fans (I assume its the fans) start making a very loud noise.
    I purchased this computer second hand, from a company who were about to throw it away because of this problem.
    At the time I called an apple engineer who came round and fixed the problem, as I remember fairly quickly.
    The computer then worked fine for around 3 years.
    I moved home recenly and transported the computer (safely and securely) in the back of the car.  However, on set up the problem had re-occured.
    There are no start-up discs as the computer was destined for the rubbish bin, and if I can avoid calling out an engineer as I did previously then that would be great!
    If anyone has any ideas on what I could attempt then I would be grateful.
    Thanks in advance
    Jamie D

    Just hold t key down while powering up for Target mode.
    Unless you have...
    Firmware password protection in Mac OS X ...
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option boot will show a lock, and Shift, as well as booting from anything but the Hard Drive.
    Force Removing Password Protection
    1) Add or remove DIMMs to change the total amount of RAM in the computer.
    2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
    http://www.securemac.com/openfirmwarepasswordprotection.php

  • Macbook air Lion stuck at grey screen and spinning wheel

    HI
    I have a Macbook air with Lion installed.  I pressed the On button, but it gets stuck at grey screen, apple logo and spining wheel.  I then managed to get it to startup in Safe Mode.
    How can I find out  what the problem was? 
    Please could you let me know if there are some simple steps to fix this?
    Thank you in advance.

    Please carefully read Gray screen appears during startup, Apple will tell you how to trouble shoot the issue. I suspect your HD has crashed, not a big deal if you have been backing up. However if you haven't then you're probably about to learn a lesson on why backup is critical.

  • Macbook pro stuck on grey screen and making buzzing noise

    hi,
    Lately my mac has been playing up (1 year old), ever now and then it would make a funny buzzing noise, coming from the left side..  and i noticed it was running slower than usual. Im Running Mountain Lion and have 566GB of disk space left... after using it for about 5 minutes the buzzing noise would start and it would become unresposive with the spiral beach ball.  So i would have to hard restart it.  Now ever time i turn it on it gets to a grey screen and doesnt load further. eventually the sound starts again!! i have tried starting it in safe mode and verifying my disk in utilities where everything "seems to be ok" !!    someone please help!!!  

    Ethan997,
    define “an average disk”.
    Your question regarding fault is akin to asking “is it my fault or the car maker’s fault that my spark plugs no longer work?” — disks, like spark plugs, don’t last forever, and fault doesn’t come into it. Similarly, the fact that your disk (or spark plugs) worked yesterday and doesn’t work today is not a sudden “breakage” — by their nature, they have a finite, variable amount of time in which they do work. This is why (in the case of disks) making regular backups is important; when the disk stops working, you’ll have an easy way to recover from such a situation.
    That being said, if your MacBook Pro is still under warranty, you should be able to get a replacement disk from Apple. And even if it isn’t, you could  still try reformatting your current disk, to see if you can squeeze some more use out of it — but if the reformatted volume keeps needing to be repaired (and you have the patience to deal with recovering from the same situation again and again), that’s a sure sign that a new disk would be your best option.

  • Stuck at grey screen and spinning wheel

    I have a IMac that suddenly can't move past the grey screen, apple logos, and spinning wheel.  I have used the OS system disk to repair the Macintosh HD, the app stated that the repair of the volume was successful, but in trying to use the HD to restart, I am still stuck with the spinning wheel.  What should I do next, or what am I doing wrong?
    Vetaut

    Please carefully read Gray screen appears during startup, Apple will tell you how to trouble shoot the issue. I suspect your HD has crashed, not a big deal if you have been backing up. However if you haven't then you're probably about to learn a lesson on why backup is critical.

  • Stuck on grey screen and can't back up my HD

    Im on Macbook Pro, Mountain Lion. I've been stuck at the grey loading screen, making every attempt to backup my HD. I have an external HD im trying to copy everything over to but everytime I try to create New Image, it gives me the permission error -61. Sometimes when I repair the Disk it tells me "Macintosh HD appears to be OK." Then the next time I run it, it tells me "Error: Disk Utlitly can't repair this disk. Back up as many files...." I have also repaired permissions and it repairs a few, but still does not allow me to copy my files over. I had no Time Machine backups. Is there anything else I should be doing, or have I lost all my files?

    .Create a data recovery/undelete external boot drive

  • Stuck on grey screen and worse...

    Hey Guys and Gals
    Was updating to latest version of Mavericks, restart my Macbook Pro, and it got stuck on the apple startup screen with the spinning 'working' icon underneath. Tried restarting in safe mode, no luck, and have tried reinstalling Mac OS via recovery but it says that my Macintosh HD disk is "locked". Upon trying to repair it in Disk Utility, it cannot complete repair and says to backup and do a clean install. At this point, my question it how can I backup my drive if it seemingly can't be fixed. Am I screwed? Thanks for any help and let me know any more info you need.
    RD

    You are screwed unless you already have a backup. Here's how to proceed:
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • HT1349 My Apple MacBook Pro won't start up.  It is stuck on grey screen and I reset all of the stuff.  It still won't work also half the screen goes dark then you have to shake it till it goes back on.  Please help.

    MacBook Pro     Older version with grey keyboard

    You might have better luck posting on the Mabook Pro discussion forum, as this is the OS X Xserve server forum.
    Have you tried booting it from a DVD? If so and you find the same result, then its probably a hardware issue.

  • Powermac G5 stuck on grey screen start up and fans running wild

    Hi All
    I also have the recurring problem all of a sudden - yesterday all seems well, today am stuck on grey screen and fans getting stronger by the minute. NOTHING works - have been through all sorts of forums and the most I got was to try disk utility - which says all is well - replaced the battery - tried just about anything short of pouring some acid on the **** thing, won't boot from original install CD either - I really need this machine as I earn my living with it and cant afford a new one and why as it was working just perfect - now this mess. In a way don't know why the excellerating fans are not built to simply pick up speed and then eat into the PC board and CPU - at lest this way we know for sure there is nothing we can do.
    Does no one here know why the mac is doing this - not even the mac fundies? Unbelievable. I live in Namibia and Apple Mac support here is similar to that on this website - might as well write this on a wall - that is why I am really frustrated... **** Mac

    Follow these steps in order:
    http://support.apple.com/kb/TS2570
    The G5 is also subject to solder failure around the RAM slots and memory controller.
    It is a fatal condition, but one that can sometimes be temporarily sidestepped by heating the logic board between the RAM slots with a hair dryer.
    Heat the board until very warm (hot) then start.
    If your machine starts after heating, then you better just leave the machine on all the time.
    You never know when the trick won't work......

  • G5 start up problem: stuck at grey screen with fans running full strength

    hi, i'm new to discussions, so i hope this question and my technical knowledge and descriptions will be OK: problem: G5 20" stuck at grey screen with fans running full strength..
    so far i've tried but did not work:
    - power off by pressing the button for 5 secs,
    - checked all cables connections etc, take out the power cable try again, etc.
    - removed all USB connections, re-did
    - tried to use it as 'target drive' connected to my macbook by firewire
    - tried to start up and keeping C key pressed
    - tried to start up with 'shift' key pressed
    - tried to start up with command, options, P and R keys pressed,
    - i had an additional RAM, i've taken it out and tried again, no luck
    - i've put in Mac OS X install disc1, no luck, and now disc is inside my iMac, can't take it out
    any recommendations? thank you!

    Scroto,
    You may not actually have a bad processor. On the Dual G5's it's not uncommon after a few years for dust and corrosion to build up between the processors and their sockets. You can fairly easily remove the processors and clean the connections yourself if you're at all handy. Basically, snap off the heatsink covers, loosen a few screws and the processor and heatsink come out as a unit.
    Clean the contacts on the processors (carefully). And clean the sockets. Be sure to put the same processor in the same place or you'll have issues.
    I used 90% isopropol alcohol to clean mine last year. Let it air dry and blew both the socket and the cpu off after with canned air. That done, I reinstalled the processors, buckled everything up and no more "bad" processor... The machine worked perfectly from then on and I assume it still does today. Don't know, someone stole it last month:(...

  • My Macbookpro 2012 won't turn on, stuck on grey screen, logo and loading bar

    It is stuck on the grey screen with the logo and the loading bar, which won't pass after 30%. If i turn it on, it shows it up again but as it reaches 33% it shuts off by itself. Please, help me. I've been searching online for resolutions but there seems to be a wide variety of ways. I'm not sure which to preform as I am scared to make a mistake and accidentally make it worse. If anyone had this problem before, is there any way to fix it without re-installing stuff? Or is there a easy an safe way to preform it? Thanks.

    I have a 2011 MacBookPro and I was using iPhoto a couple of days ago when I received a software update message.  I clicked OK (as the message assured me that I could continue to use my computer while updating took place).  After a while I got a meesage that iPhoto needed to be closed for the software updates to be completed, but I continued working with the intention of closing it soon.  After about another minute, the screen split into two panes (one third/two thirds split) and then froze.  Hard shutdown didn't resolve the problem and then the screen went black.  Re-starting gave me a grey screen and no functionality at all.
    Repeated attempts to re-boot made no difference so I followed various peoples' suggestions on-line (using another computer).  Even the Safe Mode boot (Power button plus Shift) wouldn't work, so I trekked to an Apple store to see a genius, but was told there was a two hour wait.  I gave up and came back, and tried Safe Mode starting again.  This time it worked (why!?) and I got into the MBP, but with the vertical screen striping and limited functionality.  I tried the Safe Mode boot many times, all with the same result, but eventually I also got a message about iPhoto needing the library to be repaired.  I did this (took about 30 minutes).  Having done this, it still wouldn't start in normal mode, so I gave up for the evening.  This morning I thought I would try once more before booking a Genius Bar slot - and all was working OK (although slightly slower than normal)!!  What changed overnight I have no idea but the lesson seems to be - keep trying Safe Mode booting until it clears - very scientific!

  • My old mac powerbook g4 wont boot up, it wont show apple logo and spinner aswell just stuck on grey screen while booting please help me

    i have a old powerbook g4 which i usally use to store some photos and to listen music. the battery of my powerbook is completly dead so i used to use my powerbook using charger adapter so whenever my power cuts down my laptop will be shutdown.
    one day i had just bootedup my powerbook and some date notificateion poped up so i press enter and suddenly my power went off and laptop shuted down. and next time when i tried to boot its stuck at grey screen , i even cant reach the apple logo and spinner. please helppp me :!!!!!!!!!!!!!!!

    Resetting PRAM and NVRAM is not working
    and i cann't boot it on safemode holding shift button and while holding option or c button at startup i can only see three things 1 is refresh button, 2 macintosh HD with X under it, 3 arrow forward button please help me

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • TS2570 My Mac is stuck on grey screen what's wrong with it and am I going to lose everything

    My Mac is stuck on grey screen what's wrong with it and am I going to lose everything

    Hopefully you have a backup, but...
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    Maybe this might help.
    http://support.apple.com/kb/TS2570

Maybe you are looking for

  • Problem with set-up of a macmini server with airport

    Dear readers Last week I took the bolt step to buy a macmini with OS 10.6 server to set-up a server at home for al kinds of reasons including the claim that it should be easy. Well I am still struggling but making progress in discovering how things w

  • Officejet 4500 Wireless Problems

    Printer will not print documents. It is clearly turned on, but the computer says it iis powered off. How do I fix this issue?

  • Trigger when generating/updating a PP resource(work center) in SAP ECC 6.0

    Hello, SDN members. The thing is: I want to mapp when a resource (transaction CRC1 ou CR01) is generated to trigger an interface other Non-SAP System. I am used to use EXITs or BaDIs to mapp changes when it is about process orders, MRP, etc. I have b

  • How do I get java script?

    I click on a link to you tube in FireFox and it says please enable java script. I can't find anything in my menu to enable it I don't even know if I have it. my you tube app works,why doesn't the link in FireFox work.

  • Browserwindow in Fullscreen

    Hello! Did anybody know how to open the browser window in fullscreen from a java client(programm)(no java script). The menubar and the url should not be visible. Thanks