Stuck on Grey Screen During Startup

I updated to Yosemite on Saturday and everything has been working fine, I have been able to shut down and startup as normal until today.
Last night I forced my Early 2011 MacBook Pro to shut down and today it will no longer get to the login screen.
I hear the chime, the Apple appears with the Yosemite status bar underneath, it takes a long time to get about halfway then both the Apple and status bar disappear leaving just a blank grey screen.
- I can get into Single User mode, using "fsck -fy" it reports that everything is OK.
- I can't get into Safe Mode.
- I have reset PRAM
- I have NOT reset SMC (is it worth a try?)
- I have a bootable Yosemite USB, holding option I can select that but instead of presenting the Utilities window it just brings up the Apple and status bar then grey screen. For some reason my WiFi network isn't in the list either. Also, the image of my hard drive that appears has a custom icon that I haven't used for at least 5 years, very odd indeed.
I'm at a loss, any help would be greatly appreciated.
NOTE
My left fan is faulty, I have ordered a new one online. I have been using SMCFanControl to monitor it, if the computer has been feeling hot I have been increasing the RPM for a minute to cool it just to be safe until the new fan arrives. Last night I increased the RPM and SMCFanControl became unresponsive which is why I forced the computer to shut down because I couldn't reduce the fan speed back to normal.

I am able to get into Internet Recovery Mode but eventually the globe disappears and it's right back to the Apple and status bar then grey screen again.
When holding Option only my hard drive shows, there is no recovery drive option.

Similar Messages

  • Macbook stuck on grey screen during software update reboot

    After I run my software updates, it tells me that I need to reboot to install them. However, it gets stuck on a grey "Software Update" screen. It will not allow me to force quit. I've even left the computer on overnight, still there. I have to do a hard shut down. Also, when I do boot it up and continue normal activity and attempt to do a normal shut down it takes me back to that grey Software Update screen. Even if I didn't try and run it for the day. Each time, hard shut down.
    I took it to Geek Squad 2 weeks ago for this issue and a kernel error. They shipped it to Apple repair. They fixed the kernel error, but I cannot get this to update or remove the grey screen. I dread having to take it back in...but my warranty will expire next month. Any ideas? I am not getting the continuos spinning circle at that page or the Apple logo that I've read about.
    Thanks!

    Check out KB Article:  Mac OS X: Gray screen appears during startup

  • OSX Lion, stuck on grey screen at startup w/ spinning gear.

    i believe i have tried everything i could find, so any info is good.
    about a week ago my 2009 macbook pro 15 inch stopped starting up, always going to a grey screen with the apple logo and spinning gear.
    what i have done so far.
    reset nvram
    repair disk and disk permissions.
    try startup with various combinations of periferials
    i am obviously able to start into lion recovery, but my time machine backups are on the other side of the world.
    when i do a safe boot if stops with two entrys of nstat_lookup_entry failed: 2
    any help is much appreciated

    You can do two things
    1: Install Lion over itself via the Recovery, won't touch your files or most programs.
    Any program has a kernel extension file in System/Library/Extensions folder, that will get kicked out. Thus those few programs won't work and require a reinstall of their software
    2: Install Lion on a blank powered external Disk Utility > Erase with Zero + GUID OS X Extended Journaled formatted hard drive, hold the option key and boot from it, same named user, and then access your internal drive to recovery files, disconnect then do #1
     Cheat sheet to help diagnose and fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • PB G4 stuck on grey screen at startup

    I've got a PB G4 running 10.5. Everything was going fine until a couple of weeks ago when startup started stalling at the grey screen, sometimes with the apple logo and spinny thing sometimes just blank grey. After reading up on this, I popped in the original discs and ran disk utility. It ran for a while (there were lots of red errors flying by, most of them said the same thing, something about reserved file does not have data...?), and at the end it said one volume was repaired and one volume could not be repaired. I tried the repair permissions button, but that wouldn't work.
    Last night, I had to yank out the HDD so I could get files off of it for work. Assuming that my HDD is working (picking up an enclosure tonight; fingers crossed) and that I can cram everything back in and close up the PB, is there anything to be done? I understand that this laptop is quite mature, but was hoping to get some more time out of it.
    Thanks!
    Brian

    When you get a volume cannot be repaired message from Disk Utility, you have a few options. If the error is a soft error, that is, where pointers or index are scrambled, a program like Disk Warrior or TechTool Pro can usually straighten things out. If those programs can't fix it, then it's usually a hardware problem. You could erase the hard drive writing zero's to it to see if that fixes it, although that may be temporary. If that doesn't work, buy a new hard drive, which may cost less than Disk Warrior and TechTool Pro. A program like SmartUtility can show you the SMART sensor indicators, which can sometimes help you with making a decision on buying a new drive. You can download from http://www.volitans-software.com/smart_utility.php

  • MacBook Pro mid 2012 stuck on grey screen on startup

    Hey guys.!
    I need an advice from you guys.
    I updated my Mbp few hours ago... It asked for a restart , I did after sometime but now while starting up I can't get passed through the grey screen with an apple logo and circle loading sign. Before this showed a loading bar also with it.
    I can't figure out is there a problem with it or just takes time to finalise the updating or something .
    Would love to get replies ASAP
    Thanks,
    A fellow MBP user
    Aakash

    Did you try Repair Disk instead of Verify Disk? The latter does nothing.
    It is possible the drive has failed. It's also possible the drive just needs to be reformatted which you would do were you to try my second suggestion:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Stalled on grey screen during startup

    Oh dear. I hope someone can help.
    Whenever I try starting up my Mac Mini, it doesn't get past the grey screen with the grey apple logo. It doesn't have the moving grey icon thing at the bottom of the screen at all. I did a hardware check and everything passed. I tried to start up from the install cd, and it didn't work. I'm trying desperately not to have to reinstall my software. Does anyone have any suggestions? I could really use the help.
    Thanks!

    There's been a lot of debate over time about whether DiskWarrior or Tech Tools Pro are amongst those 'essential' applications or not, with many people on both sides of the fence. I must admit that in situations where a drive has failed and there is no backup, it's often very effective (though sometimes distinctly not) at getting the system up and running, commonly showing no sign that there had been a problem. The downside is that as MacOS updates or new versions are installed, Apple often adjusts the way it addresses the disk, making older versions of these utilities hazardous to use - in fact so hazardous that they can create more problems than before. That makes it essential to ensure the version of the utility is up to date and specifically compatible with the MacOS version on the system. That's caused many issues recently in the move from Panther to Tiger, and then Tiger to Leopard.
    Likewise, Data rescue II is only of use when a problem has already occurred, though it is one of the most effective data recovery tools I've ever used, so it can be an invaluable aid. It's also not so critical of MacOS versions, so there's less of a need to match the right version of it against the MacOS version of the system.
    Ultimately though, in the debate about how valuable these things are, my money doesn't so much go on repair/recovery tools as it does on backups. I'd rather spend $150 or thereabouts on a good external FW drive and a copy of SuperDuper! and make daily, scheduled, incremental backups of the entire drive. That way if and when it fails (and it will) the boot drive can be reformatted or replaced and a full restore completed in a few minutes. Not only that, but the backups can be regularly tested because they're available in the Finder to work with, so users can have a lot of confidence in quick and painless data recovery.
    Of course that doesn't really help in this situation, and it's not an argument against such utilities as DiskWarrior, but aside from the (very) old days of pre-System 7 Mac use, I've never owned, or needed disk repair tools more sophisticated than Disk First Aid/Disk Utility because when drives have failed, I've restored from backup. Personally, I'd have more confidence in a new drive or a newly formatted one with a data restore just done, than one that's been repaired by a utility.
    But that's just the system administrator in me!!

  • Mac stuck at grey screen after startup sound. Help

    Help

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Stuck on Grey Screen at Startup

    Hello
    Recently, my PowerBook G4 was running quite slow, and froze many times. One of these times, I turned off the power by holding the power switch, and have not seen the computer go past the grey startup screen with the Apple logo and rotating wheel. I put in the original PowerBook G4 Installation Disk, ran Disk Utility, but the repair failed. The following is the error message I received.
    First Aid Failed
    Disk Utility stopped repairing "Macintosh HD" because the following error was encountered:
    The underlying task reported failure on exit.
    I'd appreciate any help I can get with this.
    PowerBook G4   Mac OS X (10.4.9)  

    Yeah, I figured that... Now, it's not able to detect the hard drive at all when I try to reboot from the Disk Utility. I'm going to visit an Apple Store today.

  • OSX 10.5.8- Stuck at blue screen during startup

    After the Apple logo appears the screen goes to blue and stays there. I am also running BootCamp and can access Windows with out any problem, but I cannot get to the login screen for OSX. I have already reset my PRAM, reset my SMC, removed all ApplicationEnhancement files (I actually didn't have any), and started up in Target Mode from another computer and done a disc repair. I can access all files in Target mode without a problem. I have not archived and tried re-installing Leopard, I'd like to try and avoid this. I am also using a third party internal hard drive, but only for storage, this is not my startup disc. Does anyone know any way I can fix this?

    Start with http://support.apple.com/kb/TS1545

  • 27" iMac stuck in Grey screen after startup

    Hi everyone, I've read nearly all the posts on this subject. According to all the tips and suggestions I've done a SCM restart, I've run applejack and done an sbin/fsck -y rebuild, I've attached it to my Macbook pro via firewire in T mode and run disk utilities, I've also tried to startup from an install disc and got nowhere and I've done a PRAM rebuild. Still nothing. Someone thought it might be a Kernal panic?? Oddly enough I think it's a video card problem. as I have a second 27" Monitor and when I plug it in I normally get both screens go blue and then a second or two later I get both screens showing their respective images. This time I got nothing. not even the blue screen. I'm going nuts here.  Does anyone have any ideas what the problems is???? Please help. oh and contrary to my listing, I'm running 10.8.1, not 10.6.8 ( I must fix that)

    Hi everyone, I've read nearly all the posts on this subject. According to all the tips and suggestions I've done a SCM restart, I've run applejack and done an sbin/fsck -y rebuild, I've attached it to my Macbook pro via firewire in T mode and run disk utilities, I've also tried to startup from an install disc and got nowhere and I've done a PRAM rebuild. Still nothing. Someone thought it might be a Kernal panic?? Oddly enough I think it's a video card problem. as I have a second 27" Monitor and when I plug it in I normally get both screens go blue and then a second or two later I get both screens showing their respective images. This time I got nothing. not even the blue screen. I'm going nuts here.  Does anyone have any ideas what the problems is???? Please help. oh and contrary to my listing, I'm running 10.8.1, not 10.6.8 ( I must fix that)

  • Stuck at grey screen at startup

    Never had a single problem with my iMac until this morning. The screensaver froze on the screen when I was waking it up and it sat there for around five minutes. Eventually, I turned it off with the button in back, let it sit for around a minute and then turned it back on. I get the chime at start up and the the apple with little rotating disk but it never moves progresses and starts up. I've unplugged it from the wall and tried starting it again and it did the same thing. When I started it from the install disk and tried to do a repair disk on it, it comes back saying The disk could not be unmounted. What can I try next? Or is it too late.

    This is sounding a lot like your hard drive has died.
    Just to be sure though, you should probably run Apple Hardware Test. Put the install DVD in the drive and hold "D" while booting. It also couldn't hurt to boot holding down the Option key. It's far from a reliable diagnostic test, but it only takes a few seconds and if your HDD isn't showing up, that means the system can't "see" it, and the drive is most likely dead.

  • STUCK ON GREY SCREEN! !PLEASE HELP!

    !!HELP!! STUCK ON GREY SCREEN
    I have a MacBook 10.5. Its a few years old anyway it seemed to be working fine up until a couple of weeks ago then it started taking ages to startup.
    I started it in singlemode then typed /sbin/fsck -fy then a message came up "harddrive appears to be ok" next i typed "reboot" and the system started booting.It started as normal with the apple logo and spinning chime,next the screen turns blue where the login screen normally appears but then the screen turns grey with no logo with just the pointer arrow on it and it doesn't seem to load past that point.Can anybody please help me solve this problem i have my kids photos and stuff on it that are unreplaceable.
    Hopefully there's a command line that can help also I don't have a installation disk so is there a way I can download 1 onto USB??
    THANKS HEAPS!!!!!

    Hi Eug07349,
    Thanks for visiting Apple Support Communities.
    It sounds like you may be experiencing a software issue. I'd suggest trying the first two steps in this article (Disconnect, test peripheral devices and network cables, Perform a Safe Boot):
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Best,
    Jeremy

  • MacBook Pro stuck at grey screen after Yosemite upgrade

    upgraded to yosemite yesterday. Reboot and stuck at grey screen(login in page) when i log in there is some codes thing at the left top corner of the screen. and then it reboots again. Which means I can never log onto the computer. what should I do

    If you can't start up and log in in the usual way, try in safe mode.
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
    ☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    Safe mode is slower than normal, and some things won’t work at all.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
    If you're able to log in, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.

  • Macbook air Lion stuck at grey screen and spinning wheel

    HI
    I have a Macbook air with Lion installed.  I pressed the On button, but it gets stuck at grey screen, apple logo and spining wheel.  I then managed to get it to startup in Safe Mode.
    How can I find out  what the problem was? 
    Please could you let me know if there are some simple steps to fix this?
    Thank you in advance.

    Please carefully read Gray screen appears during startup, Apple will tell you how to trouble shoot the issue. I suspect your HD has crashed, not a big deal if you have been backing up. However if you haven't then you're probably about to learn a lesson on why backup is critical.

  • Stuck on grey screen screen at start up...apparent Qmaster bug.

    So I found what appears to be a bug. At least for me...and at least in 10.6. Not sure if this effects other OS versions.
    I was having an issue with start up getting stuck on grey screen. Symptom is eventually start-up circle segments would stop spinning and left hanging there on the grey screen.
    There are Apple doc's and ample google hits on this subject. But I have found nothing pertaining to Qmaster as being a possible cause.
    It took me awhile to figure it out and was not an obvious issue.
    I thought it might be helpful posting this here to bring this up on a google search for someone who may be having the same problem.
    My issue:
    Doing image sequence Maya render's. However, I doubt it is Maya related.
    If I pause the render in the Batch Monitor. And shutdown. Something with Qmaster still being active hangs my startup. It is repeatable behavior.
    I have to start up holding shift key for safe mode.
    You will note, if you have 'Show Qmaster service status in menu bar', under the Advance button of QM's System Pref's pane, that the green light is on.
    That green light being on, gave me the clue that it was something to do with Qmaster.
    Clicking; Stop Sharing and restarting clears the start up hang.
    It appears, whatever permutations Qmaster expresses with a paused render on start up, is somehow preventing normal start up.
    Since I have read that menu bar items may be one possible cause for start up issues. It's also possible and therefore worth mentioning that unchecking "Show Qmaster service status in menu bar". May also resolve the problem. I have not tested that.

    Issues like this are often caused by startup jobs that are taking far too long to finish. It definitely looks like a serious bug so it's worth reporting it to Apple at either of the following places:
    http://www.apple.com/feedback/compressor.html
    http://bugreport.apple.com

Maybe you are looking for