Stuck on panic when started up

when i try yo start up the powerbook it goes to a kernel screen unable to find driver can anyone help me?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

Help!!! Brand new MBP with Santa Rosa Kernel Panics when started with...

Help!!! Brand new MBP with Santa Rosa Kernel Panics when started with external HD firewire 800 after 20 sec...
I don't know what it could be???
Do you???
Thanx
Jay

I'm actually having a similar issue and I don't think its related to networking at all.
I'm currently working in a corporate environment where we deploy pre-built OS X images to machines. I recently upgraded my images to 10.4.10 before we got our first Santa Rosa machine. This image was built on a MacPro and worked on all Intel Macs down to a MacMini CoreSolo. When I deployed my prebuilt image to the SR MBP, it caused a kernel panic immediately.
Further investigation revealed previous builds of OS X, including 10.4.10 upgraded from any other model Intel Mac will kernel panic the SR MBP. Going backwards the SR Build of OSX will not work on any previous model Mac, as any other build typically does, but causes severe graphical distortion, as if it does not have the display drivers for the other Macs.
To make a long story short, I think your issue comes from the fact that your external hard drive has an older build of OS X 10.4 than the SR MBP will run (even though you may have upgraded it to 10.4.10). Anyone who can corroborate my story with some more testing, please chime in.
I haven't found a solution for this issue yet other than keeping a seperate Santa Rosa Core 2 Duo image for my deployments.

Kernel Panic when starting up iMac! Help!

I've had a problem with Safari crashing before, in result I reinstalled OSX 10.8 about a week ago, now when starting up I get a an infinite loop of kernel panics and shutdowns. Please Help. I'd like to know what's wrong/failing and how to fix it if possible.
Here is the error message (copied after booting in Safe Mode):
Interval Since Last Panic Report: 311724 sec
Panics Since Last Report:          4
Anonymous UUID:                    EF92B037-B1F8-A5FF-A93C-E1113FF66B2C
Wed Feb 13 22:31:13 2013
panic(cpu 4 caller 0xffffff800b6b7bd5): Kernel trap at 0xffffff800b68931a, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0xffffff81db908000, CR3: 0x000000000dcd4000, CR4: 0x0000000000000660
RAX: 0xffff7f802e91a2a0, RBX: 0xffffff80121dd278, RCX: 0x0000000000000301, RDX: 0xffffff800bcbca80
RSP: 0xffffff81dc693a20, RBP: 0xffffff81dc693a30, RSI: 0x0000000000000001, RDI: 0xffffff80121dd278
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000000000c00, R11: 0x0000000000000206
R12: 0xffffff81dc693b60, R13: 0xffffff80121dd278, R14: 0x0000000000000001, R15: 0xffffff802e91a2a0
RFL: 0x0000000000010202, RIP: 0xffffff800b68931a, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff81db908000, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff81dc6936c0 : 0xffffff800b61d626
0xffffff81dc693730 : 0xffffff800b6b7bd5
0xffffff81dc693900 : 0xffffff800b6ce4ed
0xffffff81dc693920 : 0xffffff800b68931a
0xffffff81dc693a30 : 0xffffff800b68ac9f
0xffffff81dc693a80 : 0xffffff800b683192
0xffffff81dc693da0 : 0xffffff800b6844c5
0xffffff81dc693dc0 : 0xffffff800ba53211
0xffffff81dc693e00 : 0xffffff7f8cd128d7
0xffffff81dc693e40 : 0xffffff7f8cccf51b
0xffffff81dc693e60 : 0xffffff7f8ccabb7e
0xffffff81dc693e80 : 0xffffff7f8ccaccf1
0xffffff81dc693ed0 : 0xffffff7f8ccaa738
0xffffff81dc693ef0 : 0xffffff800ba472a8
0xffffff81dc693f30 : 0xffffff800ba45daa
0xffffff81dc693f80 : 0xffffff800ba45ed9
0xffffff81dc693fb0 : 0xffffff800b6b26b7
      Kernel Extensions in backtrace:
         com.apple.ATIRadeonX2000(8.0)[14A6AB07-A70C-3FB2-99D0-FCFBD4C90244]@0xffffff7f8 cca7000->0xffffff7f8cf72fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8bc50000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8c1ab000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8c168000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000000b400000
Kernel text base: 0xffffff800b600000
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 35754680325
last loaded kext at 35584229117: com.apple.driver.AppleBluetoothMultitouch          75.15 (addr 0xffffff7f8d55b000, size 77824)
loaded kexts:
com.sophos.kext.sav          8.0.4
com.bresink.driver.BRESINKx86Monitoring          9.0
com.rogueamoeba.InstantOnCore          6.0.2
com.Greatdy.driver.SystemAudioCapture          1.0.0
com.rogueamoeba.InstantOn          6.0.2
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.1f2
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.ATIRadeonX2000          8.0.0
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f33
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.AppleMuxControl          3.2.11
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AirPort.Atheros40          600.70.23
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBUHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
com.apple.driver.AppleMultitouchDriver          235.28
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.kext.AMD4800Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleUSBHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Uninstall all of this, and then see if it runs ok.
If so, reinstall one at a time until you find the problem.
com.sophos.kext.sav          8.0.4
com.bresink.driver.BRESINKx86Monitoring          9.0
com.rogueamoeba.InstantOnCore          6.0.2
com.Greatdy.driver.SystemAudioCapture          1.0.0
com.rogueamoeba.InstantOn          6.0.2

Kernel Panic when starting the live image (CD and USB)

Hi i am a debian user that is trying arch for the first time.
I have a x48 ich9 mainboard and 4 hdds connected through the ich9 as raid10. Vista x64 is already installed.
When i start the current live image (x86_64) i get a kernel panic. Here are the lines before the loading process stops:
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 372k freed
:: Loading Initramfs
export: 36: ■■HI■■■■■■HLH■■HHH@H■IHHHHH@■■■■■■■■■■■■■■■■D■■■■@■■■■■L■HHHLHH■HH■■H
■■■■■L■■■n■■■■■N■■■■■■■■L■■■H■■■■■■■■■■■■■HIHHH@H■H@HH■H■H■L■■■■L■■■■■■■■■L■■■■■
■■■■■■■■■■■■: bad variable name
Kernel panic - not syncing: Attempted to kill init!
I have never encounterd this kind of problem and i am able to boot various other live distros on my pc.
I am little bit clueless right now.
Last edited by mrt181 (2009-03-28 01:18:05)

isolinux works, thank you very much.
I am sure i am going to post here again very soon
Last edited by mrt181 (2009-03-28 09:09:12)

Aperture 2.1 stuck or freezing when started

After the splash screen when I see the main screen, the beachball starts and doesn't stop. Except for the beachball the application freezes? I'm not sure what to do, I've rebooted,restarted I'm out of options. I'm in the middle of uploading a wedding so the timing is horrible. Also I don't use the vault. I hope someone has a solution for me.

Have the same problem. Aperture not starting, deleting preferences did not help, permissions are fixed, rebuilding library did not help, removing plugins did not help.
I have the following messages in the Console.app (the linked text is in boxed braces originally)
14.08.08 07:29:22 Aperture[7255] * NSRunLoop ignoring exception 'Exception in Aperture: Cannot remove an observer <ArchivePanelController 0x20615f10> for the key path "isMounted" from <RKArchiveVolume 0x20599600> because it is not registered as an observer.
No backtrace available.
' that raised during posting of delayed perform with target 0x13b4160 and selector '_delayedFinishLaunching'
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
14.08.08 07:29:22 Aperture[7255] Main Thread Exception in Aperture: * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
No backtrace available.
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
14.08.08 07:29:22 Aperture[7255] Main Thread Exception in Aperture: * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
No backtrace available.
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
Message was edited by: H.Mueller
Message was edited by: H.Mueller

Kernel Panic when starting from CD

I'm trying to install OS X tiger on a G5. When we put the disk in and restart holding C we get a kernel panic. We have tried changing the ram and that doesn't seem to be it. Not sure what else to do. Thanks

Which install disk is it?
The store box or the installation disks that came with the G5?
If it is either, then call Apple for a replacement, they are most likely damaged somehow.
You most likely can't use the Tiger install disks from your MacTel.
If the disks are Tiger upgrade disks, you need to buy a full version of Tiger from Apple.
The Tiger upgrade disks were given to supplement the Panther install on new PowerMac G5's.
You really shouldn't install Panther and then upgrade it to Tiger because your going to miss out on security and Terminal updates.
So buy Tiger from Apple, and you'll need to buy iLife '06 as it doesn't come with it.

Kernel panic when trying to start a OEL5u5 template vm

Hi,
I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm.
The log in the OVMM console shows the following;
Update VM Status - Running
Configure CPU Cap
Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap
run_cmd(args=['xm',
File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd
raise Exception('%s => %s' % (args, err))
>
The xend.log shows;
[2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm.
[2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused.
[2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3.
[2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .
[2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3
[2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model
[2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated
as always any help is much appreciated.
Edited by: StewCobley on 13-Nov-2012 06:23

I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens..
Started domain 32_EM11g_OVM (id=4)
Bootdata ok (command line is ro root=LABEL=/ )
Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000180800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 1574912
Kernel command line: ro root=LABEL=/
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 1600.008 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Software IO TLB disabled
Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init)
Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
CPU: L2 Cache: 2048K (64 bytes/line)
general protection fault: 0000 [1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1
RIP: e030:[<ffffffff80271280>] [<ffffffff80271280>] identify_cpu+0x210/0x494
RSP: e02b:ffffffff80643f70 EFLAGS: 00010212
RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f
RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005
RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000
R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000
Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80)
Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000
0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00
0000000000000000 0000000000000000
Call Trace:
[<ffffffff802d09bb>] kmem_cache_zalloc+0x62/0x80
[<ffffffff8064cb00>] start_kernel+0x210/0x224
[<ffffffff8064c1e5>] _sinittext+0x1e5/0x1eb
Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef
RIP [<ffffffff80271280>] identify_cpu+0x210/0x494
RSP <ffffffff80643f70>
<0>Kernel panic - not syncing: Fatal exception
clear as mud to me.
are there any other logs that will help me?
I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.
Edited by: StewCobley on 13-Nov-2012 06:21

OAS 4.0.8.1 on NT ("PANIC" message when starting OAS)

[This is a reply to the message from HUNTERTJ entitled "OAS 4.0.8.1 on NT", because OTN won't accept a direct reply to the original message]
I had a similar "PANIC" error starting OAS on NT Workstation. I asked Oracle for help, and the fix they gave me was to set up a TCP/IP Loopback Adapter (under a different hardware profile) and use this profile when running OAS. I did this, and re-installed OAS just to be sure, and it now seems to work. No idea why.
Good luck!
null

Hi !!!
I installed OAS 4.0.8.1 on Windows NT Server 4.0 with Service Pack 5 (June 1999).
I have a Oracle Database installed at the same machine (8.0.4 EE) because I installed OAS at other ORACLE_HOME. I follow the steps (workaround) showed at the document "Latest Oracle Application Server Release Notes. January 2000".
Hence, I created other user administrator for OAS and I put the entries for OAS at the User Path for this admin.
The system Path contains the entries for the database.
But, when I try to raise the process from OAS Manager, it happends the next:
Please wait while the command is being processed on host vnt05 ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host vnt05.
oassrv: Starting wrb service 0
ConfigProvider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
Web Request Broker (Version: RM 4.0.8 Windows_NT 4 00 10/20/99 21:57:40):
Accepting requests.
oassrv: Starting wrb service 3
The WRB Authentication Host Server is now running.
oassrv: Starting wrb service 4
The WRB Authentication Engine is now running.
oassrv: Starting wrb service 5
Web Request Resource Manager Proxy is accepting requests.
oassrv: Starting wrb service 6
Initializing wrbmon ........................
OWS-08821: oassrv process 'oassrv' is started up at pid 119.
oassrv is accepting requests
OWS-08849: Waited 60 secs. Didn't receive initialization complete message.
OWS-08820: Unable to start wrksf process 'wrksf'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
Any help will be appreciated.
Thanks.

N96 freezes/stuck when starting up and screen prob...

Hi, I am new and i would like to know why my N96 stucks at a blank white screen when starting up, is this what they call the "White screen of death"? I currently uses firmware version 12.043. Sometimes when I remove my microSD card and then turn on my cellphone, it starts up normally, is there something wrong with my microSD card? or is it my N96? If so, is there a way to fix this problem? Also, sometimes when I leave my phone on standby mode and it's backlight turns off, i can't turn the backlight back on or even turn off my cellphone, I tried turning off the lockguard, but it gets stucks with backlight off and only showing the battery status, and the time, is there something wrong with my cellphone? Any solution? Thank you in advance!
Message Edited by reventon on 11-Apr-2009 01:18 AM

If the phone refuses to start correctly when the microSD card is inserted but starts up normally when you remove the microSD card, then it certainly looks like the microSD card has a problem.
It could simply be data corruption, in which case reformatting the memory card (in the phone!) should put things right. This might also have something to do with the other freeze-ups you mention.
If formatting the card doesn't solve the problem then leave it out of the phone for a while and see if the phone carries on misbehaving. If there are no further problems with the memory card removed altogether then it's a fairly safe bet that the card is faulty.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Help! Kernel panic when I empty my trash.

I have 500GB disk. Unknowingly, I have filled it up. Now I only have 12GB left. I tried to clean up by removing some of my old iMovieProject file. I deleted a 20GB file and now the computer just panic when I try to empty the trash. It asks me to reset the computer. When it comes up again, it asks if I want to report the crash to Apple. Then at the top of the panic report I read something that says "Transaction too big".
I guess I cannot delete a 20GB file when I only have 12 GB free space.
In MS Windows, I can do SHIFT-DELETE to remove a file without going thru the trash can. Can I do the same in Mac OS.
I need disk space, but emptying trash causes panic. Help! I am in a deadlock situation.

The problem is that I misplaced my Installation CD.
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
Is there a way to make my external drive to be the startup disk temporarily while I repair the internal disk?
Is it Firewire or USB?

TS3742 Kernel Panic when I am updating the software

I am having the Kernel Panic when I am updating the software I tried 3 times every time the Kernel Panic thing appears, how can I resolve that?

Start with posting the latest KP report. Then, cite the update.

What is wrong with my user account?? Why do I get kernel panic when restart

Hi there. I got Leopard and was quite unhappy (don't think it was meant for a powerbook). So I started using Tiger again, and I flip flopped once or twice after the update came out for Leopard, thinking/hoping it would fix my problems. It didn't. I have given up on Leopard.
But, now Tiger seems to have a few problems of its own. I get the kernel panic when I restart my computer (telling me to restart), so I have to hold down the power button to turn it off and then turn it back on. Not a big deal, but if it shouldn't be doing that, I don't want it to, ya know? Never did it before Leopard.
My user account seems to be dysfunctional when it comes to downloading plug-ins for safari or firefox. I had to create a new user account and download the plug in from that account and then drag it into the HD to use it on my user account. I repaired disk permissions and booted from Tiger and did the same thing on there. After that, my user account is still not able to download that plug-in without getting errors (256)?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
Thanks!

Leopard will work with your Powerbook, the question is, is all your software and hardware ready for it?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
You can start from a blank slate, but if you have a hardware problem that started to generate itself, a blank slate won't solve it. It is called an erase and install. The first thing to do is backup your data*:
http://www.macmaps.com/backup.html
Once that is done at least twice, we can start looking at solutions for kernel panics*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation

Kernel panic when I try startx: edited again

I just reinstalled arch (slight mishap yesterday :oops: ) I'm running testing, have installed xorg, kde, ati stuff, etc. When I try to startx I get a "kernel panic not syncing". Has something to do with xorg configeration.
Any ideas :?:
If I just run xorgconfig no panic when I then run aticonfig etc panic.
For the moment I've given up on fglrx and am just trying radeon. the message I get says the system can't find the radeon driver :?:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
/etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE=
HARDWARECLOCK="localtime"
TIMEZONE=Canada/Eastern
KEYMAP=us
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
MODULES=(radeon)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="normlx"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond !kdm)
# End of file

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Kernel Panic when I try to install OSX 10.3. Can anyone help?

I bought this iMac recently. It has OS 10.2.? installed and OS 9.1. When I try to install OS 10.3 I get a Kernel Panic when it reboots to start the installation. I ran the Norton Disk Doctor it had over in OS9 -- said it fixed some things and now ok but I still get a Kernel Panic trying to install Panther. I just want to re-format the whole computer with 10.3 and get rid of 9. How can I do that?
Thanks.

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Kernal Panics when booting Install DVD on new MacBook Pro

First off, let me say that I know that Apple does not officially support OS X Server on their portable machines.
With that out of the way, I have been trying to install Server (the Universal Edition, of course) on the new Santa Rosa MBP that I got last weekend. The Installer DVD will kernal panic when trying to start up the machine. So I took it to my job, where we have a Mac Mini with a Core Solo processor. The Install DVD for 10.4 server boots the mini up just fine. So I put the MBP into target disk mode, and installed server on a partion I had made on the internet MBP disk when I first got it. So the installer has 10.4.7 on it, which I thought might be causing the problem. So with the Mini booted off the MBP partion, I updated the Server install to 10.4.10 and all the other updates. I then restarted the MBP, held down the option key, selected the server partion to boot up from, and the machine still kernal paniced while still booting up (It never gets past the gray Apple Screen with the spinning wheel.
Now I had hoped that the firmware update released today might help with the problem, but when I try to run that installer, it says that the firmware is not needed on my laptop. So I guess they had already installed it at the factory, even though it was not yet publicly availible.
I have looked at the kernal panic logs on the non server version of 10.4 that the machine boots after the kernal panic (when I boot back into server, using the Mini as the boot machine, there is no kernal panic logs), and I have always found the same thing, it looks like something to do with the video driver is causng the problem. The first item that is always in the backtrace is:
com.apple.NVDAResman(4.5.6)@0x500c4000
So I guess I am just wondering if anyone else out there, with a new SR MBP, has has similar problems trying to run server on their new machines?

The method you must use is outlined here:
http://docs.info.apple.com/article.html?artnum=302960
Best of luck.

Stuck on panic when started up

Similar Messages

Maybe you are looking for