Stuck on restore screen and error 3194

Hi, my ipad is stuck on the restore screen but when I go to restore it error 3194 displays. How can I sort thi

You can't get help here because you jailbroke -- probably wasn't the best idea. Try Recovery Mode: http://support.apple.com/kb/HT1808. You can avoid problems like this in the future by not jailbreaking.

Similar Messages

I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it

I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it

http://support.apple.com/kb/TS3694#error3194

I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

i have restarted my com, re-installed itunes and repeatedly tuned on and off my iphone to no avail. please help!!!

I downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.

i downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.
now my iphone has a blank screen for a couple seconds the loading screen appears then apple re appears.
A REPEATING CYCLE now i have No PHONE!!!! Help ME PLEASEEEEEEEEEEEEEE

Try it...
Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
i´ve done it and worked 100%
Good lucky

HT1212 i just tried to restore a ipod and it got half way through and is now stuck on restore screen???

i just tried to restore my ipod touch and its stuck on restore screen??

What exactly happens?
What does the status bar in iTunes say?

My iphone 3g stuck at restoring point and giving an error 1015

my iphone 3g stuck at restoring point and giving an error 1015

and error code or the exact msg would help

My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.

My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing worked

My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing worked

Iphone stuck on rebooting screen and wil not let me restore

my iphone is stuck on reboot screen and will not let me restore

http://support.apple.com/kb/HT1808

My 4th Gen iPod wont restore because of error 3194. PLEASE HELP?

It went into recovery mode, and so i plugged it into iTunes. However when I plug it up it says it needs to be restored, and it wont restore because of error 3194. Nothing I have read yet is helping.

Okay! I may have a solution for some of you! I have a 4th gen click wheel, and it was doing the whole restart thing over and over, but never getting past the apple logo.
You need to get to the diagnostic mode. To do this I had to hold down the select and rewind buttons at the same time. (for some models it's the sel/ff buttons or the ff/rw at the same time. The Apple logo will briefly appear backwards, and then you should hear a chime. My screen came up as:
IRAMPASS
PLAY TO CONTINUE
(and some other junk)
press play.
Another menu will come up, scroll through the menu (my Ipod I had to click ff to scroll through. There were 3 pages to scroll through. I got to disk mode on that menu and with the ipod connected to my computer, I started disk mode. Once disk mode started my computer recognized the ipod (finally) and I was able to restore from the computer.
I did lose all the music stored on it, but I'm happy to have made this progress, considering when I got this ipod from a friend two days ago, who was about to throw it in the garbage, it would not even turn on!
Hope this post helps someone!

HT1338 i cant get in to os system. the screen just stuck in white screen and apple logo

i can not get in to my os system. the screen just stuck in white screen and apple logo

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

I can't restore my ipod, error 3194 pops up, I need help

I can't restore my ipod, error 3194 pops up, I need help. Please

From http://support.apple.com/kb/TS3694#error3194:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

HT201210 i tried to jailbreak my ipod 4g 6.0.1(523) but was not possible. now i cant restore it becouse say i cant restore my ipod error 3194. i try to edit hosts on win32 but was unsuccesfully. anybody help me please :(((((

i tried to jailbreak my ipod 4g 6.0.1(523) but was not possible. now i cant restore it becouse say i cant restore my ipod error 3194. i try to edit hosts on win32 but was unsuccesfully. anybody help me please :(((((

Jailbreak discussion is not allowed in forum.
And you have learned the risk of jailbreak.

TS3694 my iPhone wont restore it says error 3194 its on version 5.1.1

my iPhone wont restore it says error 3194 its on version 5.1.1

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service

HT201412 my ipod touch 4g is stuck on white screen and none of the buttons work and holding home and sleep button doesnt work either

hi im abishek and my ipod touh 4 g is stuck on white screen and holding he power and hoe button doesnt work.what should i do?????!!!!!
and also my ipod doesnt show upp on itunes so i cant restore it.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?

My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?

This is covered in the basics section of the manual:
iPhone User Guide (For iOS 5.0 Software)

Stuck on restore screen and error 3194

Similar Messages

Maybe you are looking for