Stuck on the restarting page. What do I do?

My Macbook air is trying to restart after installing the messagesbeta program. Now it's stuck on the restarting page. What do I do?

I would press the power on key and hold it for 6 or 7 seconds.  That will shut down your machine.  You can then power it up and see what happens.

Similar Messages

  • I have a 2007 macbook that is stuck on the loading page and after a while it shuts down by itself. I don't know what to do anymore please help!!!

    I have a 2007 macbook that is stuck on the loading page and after a while it shuts down by itself. I don't know what to do anymore please help!!!

    Hello Sebas4224
    Start with the article below to troubleshoot issues with your MacBook starting up and staying on. Let me know how it goes in case it does not help and I or others can assist you further.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Regards,
    -Norm G.

  • My ipod touch get restart by itself and just get stuck with the apple logo, What can i do?

    my ipod touch get restart by itself, and just get stuck with the apple logo, What can i do?

    Try connecting it to your iTunes library in recovery mode using the instructions in this Apple support document.
    http://support.apple.com/kb/ht1808
    Otherwise, try connecting in DFU mode.
    http://www.iclarified.com/entry/index.php?enid=1034
    B-rock

  • I just bought a used iphone 5 and i am stuck with the icloud page because the old owner dont remember his password what should i do ?

    i just bought a used iphone 5 and i am stuck with the icloud page because the old owner don't remember his password what should i do ?

    Ask him for your money back.
    Pete

  • Stuck on the loading page for 5 hours

    My Macbook Pro is stuck on the loading page since 4 this afternoon and nothings has change since tthen, I try to close it, reopen it and nothing happen, I even  try to plug it and nothings happens, I don't know what to do. If someone can help me that would be really nice.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My camera on my iPhone 5 is not working it's stuck on the shutter screen what can I do please help!!!!

    my camera on my iPhone 5 is not working it's stuck on the shutter screen what can I do please help!!!!

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Help!! my iphone just stuck on the contact page!

    I just wanted to call someone and it stuck on the contact page! i tried to shut it down but when i opened it , it steel on the that page and refuse to get back to the homepage , what should i do?

    You should hold them for as long as it takes for the screen to go black and the apple logo to appear. When you say: "i tried to shut it down but when i opened it , it steel on the that page" how did you try to shut it down?

  • I just jail broke my iPod and its stuck on the apple logo what should i do?

    i just jail broke my iPod and its stuck on the apple logo what should i do?

    The same thing happened to me. I assume it is stuck in an endless loop of restarting. You have to put it in connect to iTunes mode (http://www.youtube.com/watch?v=rm2D7-PCTaw) then restore your iPod. Hope it helps!

  • 22" iMac desktop OSX 10.6.6 Snow Leopard and it won't boot. I've tried shift start, option command+P+R. It's stuck at the restart, all I see is the spinning wheel below the apple logo.

    I have a 22" iMac desktop running OSX 10.6  Snow Leopard and it won't boot. I've tried shift start, option command P R. It's stuck at the restart, all I see is the spinning wheel below the apple logo. And I lost my OSX DVD is there any way to fix this? I just did a software update yesterday and have about 20GB left on my Hard drive. The last thing I did was try to install some plugin's for Pro Tools 8, but it wouldnt let me install so I restarted and now I'm screwed. Please Help!
    other specs for my computer: 3.06GHz Intel core 2 duo processor 500 GB Serial ATA hard drive, iSight, magic mouse, wireless mac keyboard
    iPod classic 160GB (Late 2009), Mac OS X (10.6.6)

    You have to consider the possibility the hard drive may be dying.    If your data isn't backed up, try one of the tools below:
    https://discussions.apple.com/docs/DOC-1689
    Once you are sure your data is backed up, we can examine other possibilities.  In the meantime call AppleCare for your original installation DVDs.  You may need them.

  • Adobe story is not loading. Once the program has accepted my password, it get stuck on the "loading" page.

    Help! I cannot access anything in adobe story. It is perpetually stuck on the loading page. I tried deleting my history and using a private browser page. Nothing is working.

    Hi,
    This may be an issue with the Flash Player or the Browser. First try updating to the latest version of flash player. You can install the latest one from here: Adobe Flash Player Install for all versions<https://get.adobe.com/flashplayer>. Then try to login again. ?Can you also try a different Browser to see if that is the issue?
    Thanks!

  • HT5163 My SIM card is stuck in the iPhone. I am able to remove the SIM tray but the SIM card is stuck in the iPhone. What should I do to retrieve the stuck SIM card?

    When I attempted to remove SIM card from my iPhone 4S, the SIM tray came out leaving the SIM card behind. The SIM card is stuck in the iPhone. What should I do to retrieve the SIM card which is stuck in the iPhone?

    bring your phone into an Apple store

  • I just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?

    i just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?

    The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer that is running iTunes. Getting started guide : http://support.apple.com/kb/HT4053
    The iPad manual also has a chapter on getting started - it can be downloaded from here : http://support.apple.com/manuals/ipad

  • During the last week my Iphone has been switching off/on on its own and now my Iphone got stuck at the apple logo.What should I do?

    During the last week my Iphone has been switching off/on on its own and now my Iphone got stuck at the apple logo.What should I do?A month ago it also happened but then everything got back to normal.A person told me to change th display...what should i do?please help!

    Hey adinat,
    Welcome to Apple Support Communities! I would go through the steps in the iPhone troubleshooting assistant and see if that resolves the issue you're experiencing on your iPhone 5:
    Frozen or unresponsive iPhone
    http://www.apple.com/support/iphone/assistant/phone/
    Regards,
    David

  • I bought an ipad from a friend but he doesnt know his apple id and password and is stuck at the activation screen what do i have to do to get it unlocked

    i bought an ipad from a friend but he doesnt know his apple id and password and is stuck at the activation screen what do i have to do to get it unlocked

    If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. Are you sure the "friend" who sold you this iPad was the primal owner? If you cannot contact the original owner return the device to "your friend" and get a refund. You will never be able to activate the device and no one can help you do it.

  • I started my ipad in wifi but didnt open the web page, what is the problem?

    i started my ipad in wifi but didnt open the web page, what is the problem?

    Your iPad is probably not connected to the Internet.

Maybe you are looking for

  • Adding multiple rows to the HtmlDataTable in bean.

    Hi, I am facing a problem in displaying the table data which I am constructing in my Bean using HtmlDataTable. I am constructing a HtmlDataTable and binding it to a <h:dataTable>. As per the requirement, I need to display the data in different rows o

  • Swf to FLA / EPS / AI or other usable format

    Hi there everyone, I need to make a tool (in flash) that people who do NOT have flash can use to create some artwork (graphs and lines at particular angels in particular) and then export the artwork in a format that designers who DO have flash can us

  • Trying to fit "long" images into Widget Gallery

    Hi- I have several png's that are around 800px wide and 120px high. I'm struggling with trying to find a way to fit into gallery widget.  I've tried several things and can't seem to widget to be at that dimension so the entire image is visible. I've

  • My MacBook Pro won't turn on and is fully charged

    I watched a Dvd this morning on my Mac book pro it was plugged in and fully charged when I shut it down. I unplugged it and put it up. When I got home it will not turn on. It shows green light (for fully charged) but nothing when you touch the power

  • Javaee5 Tutorial first step error(can not run ant)

    Hi all, I have just installed Sun Java System Application Server enterprise Edition in my computer. My system is getoo . I copy the javaee5Tutorial to the directory of Sun Java System Application Server enterprise Edition Here is the error: in the bo