Stuck on tv type selection screen.
I just got the ATV and Im already having problems with it. After the lauguage selection screen it takes me to the screen where I can select the type of tv i have (720, 1080p, 1080i, ect.)I select the right one and all of the sudden the ATV turns off and starts right back up again with the same tv selection screen up again. Ive tried all the troubleshooting keys that are provided in the manual and still nothing. I have even left it disconnected over night and I am still having the same problems. HELP!!!
Welcome to the Discussion Forums
If you select a video output that your tv doesn't support, this is what will happen.
Similar Messages
-
How to set Screen type "Selection Screen" in Dialog program
Hi Experts,
I have copied a screen 400 from a program into my program. In that screen in source program, the screen type was defined as 'Selection Screen'. After i copied that screen into my program, the screen type Selection Screen option is disabled. How to set the screen type of a screen to Selection Screen.
I am currently getting the following error
"Error when generating the selection screen "0400" of "Ztest_screen ".
I tried running the generation program RSDBGENA. There the diagnosis was given as follows:
When generating the report Ztest_screen and its selection screen, an existing screen 1000 (not a selection screen) was overwritten.
The selection screen was defined as follows:
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
PARAMETERS: p_werks TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blck1.
SELECTION-SCREEN END OF SCREEN 400 .
I am calling the screen 400 with selection screen declarations in PBO of screen 0100.
CALL SUBSCREEN sub_scr INCLUDING 'Ztest_Screen' '400'.
Where am i going wrong? Your inputs are needed.
ThanksThanks Przemysław and Nabheet for your suggestions.
I had copied the generated screen 400 also from the source program into my program. This was the error. I deleted that and the report got activated now.
Both the source and destination programs are not module pool. They are executable programs.
Thanks -
IPod getting stuck at the Language Select screen. HELP PLEASE!
I couldn't turn my iPod on after charging it, so I reset factory settings. After that the buttons/clickwheel didn't work, and the only way I could turn my iPod on was with the hold switch, and then I would be stuck at the language select screen. When my friend suggested I do a hard reset (even though I didn't think the buttons worked) I did so and realized that I could also turn it on with that method, but I'm still stuck at the language screen.
I don't know what a "hard reset" is.
Have you tried a restore?
See: How to restore the iPod to factory settings. -
Hi,
I am having a selection screen with few parameters and also having a push button. When the user clicks on the push button, a new selection screen should open(like varaint screen) with check boxes. The user should have possibility of saving the screen.
The initial screen had been done. I want help when the user click on the push button.
Any idea of how this can be done. Any inputs will be appreciated.
Regards,
Ramesh.Hi,
Declare the 2nd screen using ....
SELECTION-SCREEN: BEGIN OF SCREEN 2000.
declare the checkboxes ....
SELECTION-SCREEN: END OF SCREEN 2000.
At the time of variant saving both the screen values will be saved.
Regards,
Amitava -
Selection screen option for Screen type like inDEMO_SEL_SCREEN_AS_SUBSCREEN
hello,
in this program there are 2 selection screens,called from MAIN screen.
DEMO_SEL_SCREEN_AS_SUBSCREEN
i want to create similar..
In main screen i will have 3 screens (which should have of screen type 'Selection screen ' ) and 1 BOX (in which I will have Table control)..
I created the main screen 0100 and 3 sub screens..(1001,1002,1003)
But when i want to create these I cannot choose Screen Type as 4 Selection screen (the other options are 1.normal 2.Subscreen 3 Modal dialog box)..
I have gone through other threads..they simply say its not possible..
then how was it done in DEMO_SEL_SCREEN_AS_SUBSCREEN..
Also i have seen Zprograms with 3 sub screens as Selection screen ...
Also interestingly the short description of this screen is
SEL_SCREEN 1100 INFO:140000140000000000000000000005490892784Hi,
This code form teh same program creates them as selection screen.
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-010.
PARAMETERS: p1(10) TYPE c,
p2(10) TYPE c,
p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1100.
SELECTION-SCREEN BEGIN OF SCREEN 1200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-020.
PARAMETERS: q1(10) TYPE c OBLIGATORY,
q2(10) TYPE c OBLIGATORY,
q3(10) TYPE c OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 1200.
check this out:
[http://wiki.sdn.sap.com/wiki/display/ABAP/Select-OptionsinModulePoolProgramming]
Edited by: sap_wiz on Jun 23, 2011 1:33 PM -
Mavericks installer stuck on disk select screen
Hi all,
I just attempted to update to the new os x mavericks. However, I've been stuck on the disk select screen for about a half hour and no disks are popping up to select. Is there anything I can do here? I tried rebooting with the old OS X and it says it is not able to. I'm unsure where to go from here, especially not without risking any damage to files, etc.What is the error message, please? Time Machine won't be an option until after OS X is reinstalled and you enter the Setup Assistant. You aren't there yet.
I want you to quit the installer if it's running. Then try rebooting as follows:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select your normal startup disk.
5. Click on the arrow button below the icon.
Let me know if you can still boot from your old system. If not, then you need to do a reinstall of Mavericks.
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
1. Intel-based Macs: Resetting the System Management Controller (SMC).
2. Repair the Hard Drive and Permissions - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
3. Re-download and reinstall Mavericks.
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion/Mavericks: Select Reinstall Lion/Mountain Lion/Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Nano frozen on selection screen.
Howdy,
My iPod nano is stuck on the main selection screen. When I attempt to connect it to my computer iTunes will not recognize it, but the iPod will charge and shows the "Connected" screen. I have reset it numerous times using the Menu/Select method, and attempted to put it into Disk Mode to no avail. I do not care about losing the music - I have that all backed up. If anyone could be of assistance I would greatly appreciate it. Any info is helpful.
Thanks!Hello Keith,
It would be helpful to post your solution, just in case someone else runs into your same situation.
Problem Fixed. I am Stupid.
NOT!!! Excitement has a way of causing euphoria, where the mind sometimes overlook the obvious.
Gary -
Calling userdefined selection screen
Hi all,
here i am having scenario like
first calling a selection screen with push button, when click the button
it should call anyother selection screen and execute that with selection parameters
please let me know anyoneHii,
first declare a pushbutton like ( if second selection parameter is date type)
SELECTION-SCREEN PUSHBUTTON /05(20) c_date
USER-COMMAND cdate .
SELECTION-SCREEN BEGIN OF SCREEN 0100." AS SUBSCREEN.
SELECT-OPTIONS : s_augdt FOR v_augdt OBLIGATORY NO-EXTENSION." no-display.
SELECTION-SCREEN END OF SCREEN 0100.
AT SELECTION-SCREEN.
*----CHECK FOR USER COMMAND - CDATE MEANS USER HAS SELECTED CLEARIND DATE BUTTON FROM SELECTION SCREEN
IF sy-ucomm = 'CDATE'.
CALL SELECTION-SCREEN 0100 STARTING AT '10' '10' ENDING AT '120' '15'.
ENDIF.
Regards,
Arti -
HR field unknown in selection screen
Hi experts,
Have a problem with selection screen for an HR report. Here's the code:
selection-screen begin of block b2 with frame title text-002.
parameters:
payid like pc261-payid modif id spe. "pay identification
select-OPTIONS:
s_payty for pc261-payty." modif id spe. "pay type
selection-screen end of block b2.
I get this error message :" field pc261-payty is unknown."
Mind you, I don't get any errors if I put payty in parameters as I have done for payid. The structure pc261 can be acessed by double click, so it's obviously visible. Please advise.Hi Stanley,
If pc261 is structure then you can also use
DATA pc261 type pc261.
Then you will not get this error.
Regards,
Atish -
Hi Experts ,
i am passing sub screens dynamically into the selection screen . IN output i am getting vertical scroll bar in subscreen. my requirement is to avoid scroll bar to that perticular subscreen.
pls send the code how to avoid that scroll bar , here i am sending the coed below ( for 1300 sub screen i am getting scroll bar)
pls do needfull .
Thanks,
Nagendra.
tables
TABLES:
sscrfields,
draw, "Document Info Records
drat, "Texts for Document Info Records
cabn, "Characteristic
cawn, "characteristic values
cawnt, "characteristic value text
ausp, "Characteristic values
tdwa, "Document Types
lfa1, "Vendors
ekko, "Purchasing Documents Header
ekpo, "Purchasing Document items
t023t, "Material Group Descriptions
klah, "Classes
cabnt, "Characteristic descriptions
lfb1, "Vendor master (company Code)
t059t, "texts for minority indicators
tdws, "Document status
tdwst, "Document Status Text
sos04, "SAPoffice: screen fields for function group SO04
t006, "Units of Measurement
tcurx, "Decimal Places in Currencies
*+MD1K960995
ekbe.
Parameters
Program Parameters
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK buyingguide
WITH FRAME TITLE text-104.
Company Code
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-300 FOR FIELD s_bukrs.
SELECT-OPTIONS: s_bukrs FOR ekko-bukrs MEMORY ID buk.
SELECTION-SCREEN END OF LINE.
Purchasing Document Category
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-301 FOR FIELD s_bstyp.
SELECT-OPTIONS: s_bstyp FOR ekko-bstyp DEFAULT 'K'.
SELECTION-SCREEN END OF LINE.
Purchasing Document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-302 FOR FIELD s_bsart.
SELECT-OPTIONS: s_bsart FOR ekko-bsart MEMORY ID bsa.
SELECTION-SCREEN END OF LINE.
Purchasing Document Creation Date
SELECTION-SCREEN BEGIN OF LINE. "MD1K964692
SELECTION-SCREEN COMMENT 1(28) text-303 FOR FIELD s_aedat. "MD1K964692
SELECT-OPTIONS: s_aedat FOR ekko-aedat. "MD1K964692
SELECTION-SCREEN END OF LINE. "MD1K964692
Purchasing Document Creator
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-304 FOR FIELD s_ernam.
SELECT-OPTIONS: s_ernam FOR ekko-ernam.
SELECTION-SCREEN END OF LINE.
Purchasing Document Vendor Account Number
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-305 FOR FIELD s_lifnr.
SELECT-OPTIONS: s_lifnr FOR ekko-lifnr MEMORY ID lif.
SELECTION-SCREEN END OF LINE.
Purchasing Organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-306 FOR FIELD s_ekorg.
SELECT-OPTIONS: s_ekorg FOR ekko-ekorg MEMORY ID eko.
SELECTION-SCREEN END OF LINE.
*+G1
Purchasing Group
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-340 FOR FIELD s_ekorg.
SELECT-OPTIONS: s_ekgrp FOR ekko-ekgrp MEMORY ID ekg.
SELECTION-SCREEN END OF LINE.
Purchasing Document date
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-341 FOR FIELD s_ekorg.
SELECT-OPTIONS: s_bedat FOR ekko-bedat MEMORY ID bed.
SELECTION-SCREEN END OF LINE.
Purchasing Document item plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-307 FOR FIELD s_werks.
SELECT-OPTIONS: s_werks FOR ekpo-werks MEMORY ID wrk.
SELECTION-SCREEN END OF LINE.
*+MD1K971124
*+MD1K971479
Number of Purchasing Info Record
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-342 FOR FIELD s_infnr.
SELECT-OPTIONS: s_infnr FOR ekpo-infnr MEMORY ID inf.
SELECTION-SCREEN END OF LINE.
Purchasing Document item material group
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-308 FOR FIELD s_matkl.
SELECT-OPTIONS: s_matkl FOR ekpo-matkl MEMORY ID mkl.
SELECTION-SCREEN END OF LINE.
Purchasing Document item category
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-309 FOR FIELD s_pstyp.
SELECT-OPTIONS: s_pstyp FOR ekpo-pstyp DEFAULT 8 TO 9.
SELECTION-SCREEN END OF LINE.
Purchasing Document item material number
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-310 FOR FIELD s_matnr.
SELECT-OPTIONS: s_matnr FOR ekpo-matnr MEMORY ID mat.
SELECTION-SCREEN END OF LINE.
Purchasing Document item deletion indicator
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-311 FOR FIELD s_loekz.
SELECT-OPTIONS: s_loekz FOR ekpo-loekz DEFAULT space.
SELECTION-SCREEN END OF LINE.
Purchasing Document
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-317 FOR FIELD s_ebeln.
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln MEMORY ID vrt.
SELECTION-SCREEN END OF LINE.
Purchasing Document item
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-312 FOR FIELD s_ebelp.
SELECT-OPTIONS: s_ebelp FOR ekpo-ebelp MEMORY ID bsp.
SELECTION-SCREEN END OF LINE.
Purchasing Document item purchase req number
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-313 FOR FIELD s_banfn.
SELECT-OPTIONS: s_banfn FOR ekpo-banfn MEMORY ID ban.
SELECTION-SCREEN END OF LINE.
Purchasing Document item reference purchase document
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-318 FOR FIELD s_konnr.
SELECT-OPTIONS: s_konnr FOR ekpo-konnr.
SELECTION-SCREEN END OF LINE.
Purchasing Document item reference purchase document item
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-319 FOR FIELD s_ktpnr.
SELECT-OPTIONS: s_ktpnr FOR ekpo-ktpnr.
SELECTION-SCREEN END OF LINE.
Purchasing Document validity from date
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-314 FOR FIELD s_kdatb.
SELECT-OPTIONS: s_kdatb FOR ekko-kdatb.
SELECTION-SCREEN END OF LINE.
Purchasing Document validity to date
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) text-315 FOR FIELD s_kdate.
SELECT-OPTIONS: s_kdate FOR ekko-kdate DEFAULT sy-datum
TO '99991231'.
SELECTION-SCREEN END OF LINE.
Vendor Rating
SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 1(28) text-316 FOR FIELD s_zmrate.
*SELECT-OPTIONS: s_zmrate FOR ekko-zz_moc_rating.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK buyingguide.
SELECTION-SCREEN END OF SCREEN 1100.
SELECTION-SCREEN BEGIN OF SCREEN 1200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK document
WITH FRAME TITLE text-024.
Document number
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_dokar FOR FIELD s_dokar.
SELECT-OPTIONS: s_dokar FOR draw-dokar DEFAULT 'CN1'.
SELECTION-SCREEN END OF LINE.
Document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_doknr FOR FIELD s_doknr.
SELECT-OPTIONS: s_doknr FOR draw-doknr.
SELECTION-SCREEN END OF LINE.
Document part
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_doktl FOR FIELD s_doktl.
SELECT-OPTIONS: s_doktl FOR draw-doktl.
SELECTION-SCREEN END OF LINE.
Document version
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_dokvr FOR FIELD s_dokvr.
SELECT-OPTIONS: s_dokvr FOR draw-dokvr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
Document Status
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_dokst FOR FIELD s_dokst.
SELECT-OPTIONS: s_dokst FOR draw-dokst." DEFAULT 'AC'.
SELECTION-SCREEN END OF LINE.
Document Creation Date
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_adat FOR FIELD s_adat.
SELECT-OPTIONS: s_adat FOR draw-adatum.
SELECTION-SCREEN END OF LINE.
Document Creator
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_dwnam FOR FIELD s_dwnam.
SELECT-OPTIONS: s_dwnam FOR draw-dwnam.
SELECTION-SCREEN END OF LINE.
Document text
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_dktxt FOR FIELD s_dktxt.
SELECT-OPTIONS: s_dktxt FOR drat-dktxt.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
Parent Document number
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_prear FOR FIELD s_prear.
SELECT-OPTIONS: s_prear FOR draw-prear.
SELECTION-SCREEN END OF LINE.
Parent Document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_prenr FOR FIELD s_prenr.
SELECT-OPTIONS: s_prenr FOR draw-prenr.
SELECTION-SCREEN END OF LINE.
Parent Document part
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_pretl FOR FIELD s_pretl.
SELECT-OPTIONS: s_pretl FOR draw-pretl.
SELECTION-SCREEN END OF LINE.
Parent Document version
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(28) c_prevr FOR FIELD s_prevr.
SELECT-OPTIONS: s_prevr FOR draw-prevr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK document.
SELECTION-SCREEN END OF SCREEN 1200.
SELECTION-SCREEN BEGIN OF SCREEN 1300 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK charact
WITH FRAME TITLE text-025.
Class
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) c_class FOR FIELD p_class.
PARAMETERS: p_class LIKE klah-class OBLIGATORY
MATCHCODE OBJECT clas
DEFAULT 'CONTRACTS'.
SELECTION-SCREEN END OF LINE.
Class Type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) c_klart FOR FIELD p_klart.
PARAMETERS: p_klart LIKE klah-klart OBLIGATORY DEFAULT '017'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT /1(67) text-203.
SELECTION-SCREEN COMMENT /5(16) text-204.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_01atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_01atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_01atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_02atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_02atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_02atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_03atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_03atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_03atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_05atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_05atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_05atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_04atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_04atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_04atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_06atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_06atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_06atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_07atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_07atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_07atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_08atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_08atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_08atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_09atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_09atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_09atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_10atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_10atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_10atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_11atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_11atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_11atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_12atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_12atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_12atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_13atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_13atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_13atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_14atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_14atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_14atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_15atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_15atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_15atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_16atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_16atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_16atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_17atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_17atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_17atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_18atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_18atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_18atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_19atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_19atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_19atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_20atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_20atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_20atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_21atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_21atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_21atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_22atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_22atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_22atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_23atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_23atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_23atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_24atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_24atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_24atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pc_25atm AS CHECKBOX
MODIF ID chr.
PARAMETERS: pt_25atm LIKE cabn-atnam OBLIGATORY
VISIBLE LENGTH 26
MODIF ID chr.
SELECT-OPTIONS: s_25atm FOR ausp-atwrt
MODIF ID chr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK charact.
SELECTION-SCREEN END OF SCREEN 1300.
Main Selection screen that will incorporate the subscreens
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabs FOR 24 LINES.
SELECTION-SCREEN TAB (20) text-103 USER-COMMAND ucomm1
DEFAULT SCREEN 1100.
SELECTION-SCREEN TAB (20) text-100 USER-COMMAND ucomm2
DEFAULT SCREEN 1200.
SELECTION-SCREEN TAB (30) text-101 USER-COMMAND ucomm3
DEFAULT SCREEN 1300.
SELECTION-SCREEN END OF BLOCK tabs.
SELECTION-SCREEN BEGIN OF BLOCK misc WITH FRAME TITLE text-061.
ALV Variant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-066 FOR FIELD p_alvvar.
PARAMETERS: p_alvvar LIKE disvariant-variant. "alv variant
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK misc.hi nagendra,
i got ur problem. i put the subscreen in ur main screen.
i was gone through from ur program. there is number of parameters and select-option. and ur subscreen size is small according to your taken fields.
there is two option
1 ) . make your subscreen size full in main screen .
2) . Or you can put all fields in main screen . it does not matter for codding.
rewards if helpfull. -
Creation of selection screen in SE80
Hi SapAll.
here i have got to create a selection iscreen in my modulepool but iam unable to do this as the selection screen (Radio button) is disabled.
can any body help me in this.
regards.
varma.hi.
yes i understand what you saying but one thing how the previous developer has created the selection screen in his program of type executable and also his program contains EVENTS,INCLUDES,FIELDS,DICTIONARY STRUCTURES,TRANSACTIONS,PAI MODULES ,subroutines,screens(On the left hand side of the program when i click on display object list in se38.
Under screens i can see the screen with number 1000 of type selection screen(4th radio button enabled).
regards.
Varma
Yes, that is correct.
Whenever you open a report program via SE80 (Object Navigator) or click Display Object List from SE38, you will see a selection screen 1000 under the Screens folder.
If you are seeing a 'PAI Modules' folder, then there is a chance that the user created a few other screens within the report via CALL SCREEN statement. Check whether the Screens folder has more screen numbers, viz. 9001, 9002 etc. If yes, the PAI / PBO modules will be for those screens. Note that you cannot have PAI / PBO events for your selection screen.
Whenever you create a screen from SE80 or SE51, you cannot see that fourth radiobutton. It comes by default only in the above case.
Hope this is clear! Please revert if you have any further queries.
Cheers,
Shailesh.
Always provide feedback for useful answers -
Enable / Disable selection screen block
Hi, could u pls tell me how do I enable/disable selection screen block written below based on radio button selected??
Block to be enabled / disabled :
*----APO Version and RFC destination block
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-013.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(20) text-e11. "APO Planning Version
SELECTION-SCREEN POSITION 29.
SELECT-OPTIONS s_apover FOR w_version NO INTERVALS.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(20) text-e09. "APO RFC Destination
SELECTION-SCREEN POSITION 32.
PARAMETERS : p_aporfc LIKE rfcdes-rfcdest.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b4.
Radiobuttons :
Material Type
SELECTION-SCREEN BEGIN OF BLOCK ss04 WITH FRAME TITLE text-072 .
PARAMETERS :
Load only FERTs
p_FERT RADIOBUTTON GROUP styp DEFAULT 'X' USER-COMMAND rusr ,
Load ROH/HALBs
p_HALB RADIOBUTTON GROUP styp .
SELECTION-SCREEN END OF BLOCK ss04 .
Thanx in advanceHi
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
pa_vkorg TYPE vbak-vkorg MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
s_date FOR gs_lfa1-erdat MODIF ID def,
s_augru FOR gs_vbak-augru MODIF ID def,
s_vbeln FOR gs_vbak-vbeln MODIF ID def.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
IF pa_rep EQ gc_x.
LOOP AT SCREEN.
IF screen-group1 = gc_abc.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_def.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_upd EQ gc_x.
*For Reprocessing
LOOP AT SCREEN.
IF screen-group1 = gc_def.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_abc.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
CLEAR pa_upd.
ENDLOOP.
ENDIF.
REPORT zrich_001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
user-command chk,
p_rad2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
s_datum2 FOR sy-datum MODIF ID d2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_rad1 = 'X'
AND screen-group1 = 'D2'.
screen-active = '0'.
ENDIF.
IF p_rad2 = 'X'
AND screen-group1 = 'D1'.
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Regards
Anji -
Selection screen in type m program
How can we define Selection screen in type m program?
Moderator message - please search the forum before asking. Thread locked.
Edited by: Rob Burbank on Sep 20, 2009 2:19 PMHi Anil ,
Type M are module pool programs.
For these you have to create you screen and then determine their flow in your program.
These are executed by transactions.
Search tutorials on module pool program .
Hope its help you -
Currency field on a selection screen of type 'DMBTR'.
Hello ABAPers,
Could you please tell me how to do it?
I have a currency field on a selection screen of type 'DMBTR'.
When i input and press the enter key ,i want the value to be displayed in the following style.
1. CURRENCY EQ 'JPY'
EX:
Value before pressing EnterKey = 123456
Value after pressing EnterKey = 123,456
i.c the value should be displayed without decimal point
2. CURRENCY NE 'JPY'
EX:
Value before pressing EnterKey = 123456
Value after pressing EnterKey = 123,456.00
i.c the value should be displayed with decimal point
Note:The above trick has already been done on a standard dynpro screen of Tr.Code FB60 and Field 'Amount'.
<removed_by_moderator>
Thanks and Regards,
Mohan
Edited by: Govindasamy Mohan on Oct 8, 2009 6:22 PM
Edited by: Julius Bussche on Oct 9, 2009 1:36 PMHi ABAP Lover,
Thanks a lot for your reply.
I had the same idea as yours like using data type 'P'.
But, the problem is that there is only one currency field on the screen .There is also a field of 'Company Code'.
Both fields are mandatory .
Hence,the requirement is to convert the currency value to the currency of the company code which is input .
The conversion should yield the following output on the screen after pressing the enter button.
1. When currency EQ 'JPY' , the value should be displayed without decimal point
2.When currency NE 'JPY' , the value should be displayed with decimal point
I am very sorry for not explaining you clearly in my first posting.
Thanks and Regards,
Mohan -
Doubt in Selection-Screen for Program type "Function Group"
Hi Gurus,
I created a Function group in that i created one screen and writtem the Screen flow logic. In that screen I called a Function module "COMPLEX_SELECTIONS_DIALOG" For Creating a selection-Screen.
The code snippet is like below.
CASE ok_code .
WHEN c_clk1.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
title = text-002
text = 'Material Number'
signed = 'X'
lower_case = ' '
no_interval_check = ' '
just_display = ' ' " Un commented by Srihari
just_incl = 'X' " Un commented by Srihari
excluded_options =
description =
help_field =
search_help =
tab_and_field = st_tab
TABLES
range = r_matnr
EXCEPTIONS
no_range_tab = 1
cancelled = 2
internal_error = 3
invalid_fieldname = 4
OTHERS = 5.
it works fine. But the problem is if i click the multiple selection button for the select-option in selection screen and enter the values and copy those value. In the multiple selection button green button is not coming like noram report selection-screen. Please remember I used the program type as "Function Group" not "Module Pool".
Please send your suggestions.
Thanks,
Srihari.Ok, I am not 100% sure, if I understand you correctly, you said, you created one screen to 'simulate' a standard selection screen behavior without using select-options statement?
If that's not correct, could you please post a few more details on what exactly you are doing.
I had to 'simulate' a select-option behavior which I did as follows:
- I created a range variable to store the values (s_ctby)
- on the screen I defined the LOW (s_ctby-low), HIGH (s_ctby-high) and the multiple selection field pushbutton
- In the PBO I set the icons for the multiple selection pushbutton
READ TABLE s_ctby INDEX 2 TRANSPORTING NO FIELDS.
IF sy-subrc NE 0.
gv_createby = gc_icon_enter_data.
ELSE.
gv_createby = gc_icon_disp_data.
ENDIF.
- In the PBO make sure that any values entered on the screen are transferred to the range
* transfer any changed values into the correct range for user transaction
* (screen 0110) because that screen just 'simulates' a selection screen
* so we have to make sure that any data the user enters in the selection
* fields is passed into the appropriate ranges
IF sy-tcode EQ gc_trans_user.
* created by
IF NOT s_ctby-high IS INITIAL.
s_ctby-sign = c_i.
s_ctby-option = c_bt.
IF s_ctby[] IS INITIAL.
INSERT s_ctby INDEX 1.
ELSE.
MODIFY s_ctby INDEX 1.
ENDIF.
ELSEIF NOT s_ctby-low IS INITIAL AND
s_ctby-high IS INITIAL.
s_ctby-sign = c_i.
s_ctby-option = c_eq.
IF s_ctby[] IS INITIAL.
INSERT s_ctby INDEX 1.
ELSE.
MODIFY s_ctby INDEX 1.
ENDIF.
ELSEIF s_ctby-low IS INITIAL AND
s_ctby-high IS INITIAL.
DELETE s_ctby INDEX 1.
ENDIF.
- If the user hits the multiple selection pushbutton
WHEN gc_fc_create_by.
* if the user hits the multiple selection button on the screen
* we call the standard SAP functionality to show the multiple
* selection popup SAP uses on a standard selection screen
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
title = text-t02
TABLES
range = s_ctby
EXCEPTIONS
no_range_tab = 1
cancelled = 2
internal_error = 3
invalid_fieldname = 4
OTHERS = 5.
IF sy-subrc NE 0 AND NOT sy-msgty IS INITIAL.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* now update the header line so the screen fields display the correct values
CLEAR s_ctby.
READ TABLE s_ctby INDEX 1.
Hope that helps,
Michael
Maybe you are looking for
-
What is the path to use SSO for ASP Applications
We have a big Active Server Pages based web site. And we want to integrate the whole site to Oracle Portal Authentication and Security. The ASP web site doesn't want to mantain user information. What to do? I found that external applications are not
-
I am unable to burn CD's with the last 4 songs I've purchased from the iTunes store. I can burn CD's from playlist using previously purchased songs with no problem. With a normal length playlist including 1 of the newly purchased songs, I get the mes
-
Invoke External HTTPS Web Service from OSB 11G
Hi, We have a requirement to invoke a HTTPS web service hosted by third-party and we have to send HTTP basic authentication detials also. Third party given us the HTTP basic authentication details and only certificate nothing else. After some researc
-
Error:HDLCompiler:104: Cannot find float_alg_pkg in library ieee_proposed
When I synthesize the VHDL code from Vivado HLS in Xilinx ISE, some errors appeared. All the errors are caused by the ' aesl_fp_wrapper.vhd ' file and the first one is described like below: ERROR:HDLCompiler:104:HDLCompiler:104 - "/home/xq32/code/rvc
-
Quicktime Plug In for Safari/Leopard (audio no video) HELP
I'm having trouble viewing video from a website. What happens is the video begins but only get audio, no video at all. I'm not sure what is causing this issue. I can access the video on an old pc laptop on IE. Also I do have the latest version of Fli