Stuck on "Updating iPod Software"

in itunes - progress bar is just below 1/2 and has been there for two hours, the touch screen itself has the apple logo with an empty progress bar on it.
How long to wait, what to do?

Hello mlewis3,
Thank you for providing the details of the issue you are experiencing with your iPod touch.  I recommend the following articles for the issue you described:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now.  I know this is not normal.  What can I do?  It synced just fine, but has been stuck on" updating ipod software for 3 hours now!

    I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now.  I know this is not normal.  What can I do?  It synced just fine, but has been stuck on "updating ipod software" for 3 hours now!
    She has had it for about 6 months and this is the first time we have plugged it into the computer since then.  I can not exit out of itunes either.

    If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required.  You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

  • Ios 5 updates stuck at restoring ipod software

    I have Win7 Pro 64bit.  I have been using iTunes and my iPod touch 3G 64G just fine.  I went ahead and started the update to iOS 5 and it is stuck at restoring iPod software.  iTunes progress bar is a little over 75% and the progess bar on the touch is about 50%.  It has been this way for over two hours.
    iTunes version 10.5.0.142.
    I am able to move around in iTunes.
    Able to play video and music from files on PC.
    How long is this supposed to take?  Do I need to do anything?
    My laptop is a intel core i7 q720.
    I have 8GB of memory (DDR3 1333).
    So I am pretty sure it is not a system processing issue..
    Do I need to close iTunes and/or power off my touch?
    I googled and searched here, but was nt able to find anything matching my issue.  Closest thing here was about the beta version.  I could of overlooked something though..
    Thanks!
    Message was edited by: apl_sith_lord_support

    Sat overnight and in exactly the same state...
    When I attempt to close iTunes it pops up a message saying "iTunes cannot quit because it is restoring the software on the iPod '[podname]'. This message will be dismissed in 10 seconds."
    So I killed it via task manager..  Left USB cable plugged in...
    touch now has USB to iTunes 'symbol' on the screen..
    So started iTunes.  Now get message stating "iTunes has detected an iPod in recovery mode.  You must restore this iPod before it can be used with iTunes."
    Do doing a restore and update.  Extracted software,  Now doing a restore.  Progress bar on touch.  iTunes states "Restoring iPod Software".
    I will reply with the outcome.
    Thanks.

  • My iTouch is stuck in restore ipod software mode for about 30 minutes with little amount of update. What do I do?

    my iTouch is stuck in restore ipod software mode for about 30 minutes with little amount of update. What do I do?

    Disconnect the iPod
    Reboot the computer
    Try again. Place the iPod in  Recovery Mode  if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

    Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
    play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

    Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

  • Cannot update ipod software from version 1.0.2 to 1.0.3

    I cannot update ipod software from version 1.0.2 to 1.0.3.  The message says, "The ipod cannot be updated because it contains files that are in use by another application."  It's an ipod nano 7th generation. My Mac OS X is version 10.6.8.  What should I do?

    Temporarily disable ALL of your anitvirus/antispyware software or in your AV software turn off iPod scanning.

  • Update ipod software version 4..3.5 fails

    update ipod software version 4..3.5 fails

    Abit more information is needed so we can help you more.
    What OS are you running on
    What is the error message displayed if any,

  • Updating iTunes without updating iPod software

    If I update my iTunes to 7.6, when I plug in my iPod will it require that I update iPod software too?
    If I update my iPod I will lose the majority of my music because it will require me to factory reset (it was initialized on a PC and is still on those settings) so I don't want to be forced into that option. I'd like 7.6 though so I can rent movies.
    any help would be great!

    No, you'll have the option to update iPod software--or not. I updated to iTunes 7.6, but I still haven't updated iPod from 1.2.1 to 1.2.3.

  • Why do i keep getting error msg #1403 when updating ipod software in itunes

    why do i keep getting error msg #1403 when updating ipod software in itunes

    I Googled an found no good solutions. II would try:
    - Making sure that you have the latest version of iTunes, 10.6.
    - Disable firewall and antivirus.
    What iOS is currently on the iPod?

  • How do I update iPod software B4 using w/Yamaha YDS-10 Uni Dock 2 see photo

    We purchased a Yamaha AV Receiver and after we purchased our iPod, the folks at Circuit City told us we needed to purchase the Yamaha YDS-10 Universal Dock for iPod. We can play music just fine, but can't get back to the main menu which begins with Music, Photos, etc. We can only get to the menu beginning with Playlists, Artists, etc. We called iPod help and they determine it was not an iPod issue and said to take the unit back and get a new docking station. I found the manual for the docking station and it states:
    It is recommended that you update your iPod software before using it with this unit (YAMAHA YDS-10). The update for the iPod software is available at the Apple website.
    I can't find the software update and would greatly appreciate any help/assistance anyone can provide. We just want to be able to view our photos and the occasional movie now and then. Thank you in advance for all your help.

    thanks for the suggestion. This was just a simple tutorial on doing a regular restore through Apple. I've tried that already and it doesn't work. I'm sure that Apple downloaded the iOS 5.0.1 (9A406) through my iTues. When iTunes tries to install the firmware on my iPhone, however, that's when the errors start popping up. When I try restoring in DFU mode, my iPhone gets stuck in rebooting over and over again.
    It seems like I'm getting some kind of error even before it starts putting any firmware on my iPhone. I've never got to the part where there is a progress bar underneath the apple logo. Any other suggestions?

  • Ipod generation 1, updated ipod software version 5.1.1 and now my ipod is dead..

    I have an ipod generation 1 since 2005 and it works perfectly till yesterday when i receive a prompt from iTunes store (after my last login 6 months ago) reminder/alert to update my ipod software version to 5.1.1 in which i did and just after i updated the software my ipod went dead..
    The message appeared "Please Wait..Very low battery.." However, when i plug it into adapter charger i'll see the normal screen, but the message appear when i use the cable to connect to my lappie....Urgent help! Thanks.

    You need to continue with the Recovery...
    Once the Device is in Recovery Mode... it is too late to save anything...
    To minimise loss... After the successful Recovery... Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Can't update ipod software to 1.1.3

    I have current version of itunes, on windows XP SP2, I've had to resync my ipod library but I am unable to update my ipod. The error is strange...
    There was a problem douwnloading the iPod software the the iPod You do not have enough access privileges for this operation.
    I have a 3rd gen Nano, this never happened before on my 2nd gen. The help topic...does not help
    Has anyone seen this or knows of a fix??? I've gone thru several iTunes updates but still unable to fix this error code.
    Tks for any help

    Sorry, thought you had Windows Vista! Shows how much attention I pay to the details! haha
    1) Update iTunes to the latest version? (8.0.1)
    2) Restore the iPod in iTunes
    3) Make sure you don't have ANY windows open (except iTunes) when you try to do the update again
    I'm sure something should work for you.

  • My Nano is no working because of wrong operation of updating ipod software

    i download the recent IPOD software and try to update it to my ipod nano(1st generation). the message box shows " updating our ipod now", but suddenly, my computer is unplugged by mistake. my ipod nano is no working after that. the apple log display repeatly, but when i connect it to my computer, there is no response, and apple log still display then disapper, and repeat it for ever. so what can i do now? because there is no response when i connect my nano to computer, i can not reset, reinstall or whatever i can do. so could you please give me some advice for this problem.thanks a lot

    I have the same problem, i accidently clicked update software..and it didnt load all the way and now when i plug in the ipod nothing updates to it, everything is deleted off the i pod even though itunes has songs.. someone please help

  • Cannot update iPod software even after setting automatic detection

    Hi, I've been trying to update the software on my 5th gen iPod but to no avail. I've recently bought the pod and just installed iTunes. It informed me that an update was available for the iPod but I can't get it! Everytime I click on Update in the Version section on iTunes, it says "iTunes could not contact the iPod software update server because you are not connected to the internet....Make sure you internet connection is active and try again". The connection is active and i've even tried the method in the hot topics support section telling you to go to 'LAN settings' under the 'Connections' tab in Internet Options and under Automatic Configuration, set it to 'Automatically Detect settings' but this has still not worked. Can someone please help me as this is doing my head in?!!!

    yea... something like that is happening to me... when i try to update it (with itunes 7) it says that my firmware is "corrupt".... i dont know what this means because it had no problem updating b4... and no i didnt try to put linux or anything on it. it just wont update.
    and if anyone knows.... y does my itunes symbol look like a picture with a camera in the corner... i just downloaded itunes 7 to my friend's computer and it looks just like last itunes but instead of a green music note infront of a cd... its a blue music note infront of a cd... and when i plugged my ipod into his computer it said that my ipod is up to date.... y is that?

  • Cannot update ipod software

    i tried to update my ipod and it doesnt even connect to the ipod software update serve because it says it cant update because the firmware file could not found...i have no idea what happened...please help me out because i cant even sync more music to the ipod until i get this gets fixed...please i would appreciate any advice

    yea... something like that is happening to me... when i try to update it (with itunes 7) it says that my firmware is "corrupt".... i dont know what this means because it had no problem updating b4... and no i didnt try to put linux or anything on it. it just wont update.
    and if anyone knows.... y does my itunes symbol look like a picture with a camera in the corner... i just downloaded itunes 7 to my friend's computer and it looks just like last itunes but instead of a green music note infront of a cd... its a blue music note infront of a cd... and when i plugged my ipod into his computer it said that my ipod is up to date.... y is that?

Maybe you are looking for

  • Wireless connected- yet every program not

    I have a wireless router and an imac g5 and an ibook g4. they have both been connected to the internet via the wireless router. then suddenly my ibook g4 lost its connection while the g5 is still connected. the ibook says it is connected, however, sa

  • URL not found error while loading photo on Linux

    Hi, I have a AIR 2.0 appliaction which works perfectly well on Windows but while I run it on Linux Loader object can't load any photo. I tried many path variations but I always get Error #2035: URL Not Found. Here's how I load a photo (with hard code

  • Select data from Table1 based on Table2

    Hi Guys, Can you guide me up on how to select data from Table1 based on Table2? I want to fetch data which is not there in table2 in my table1 select query. Is that I have to do it with the loops after I select data from both tables or can it be hand

  • 2 Company Codes - Same Report --- Issue Very Urgent

    Hello Guys, I have following questions w.r.to BI implementation. We have 40 SAP BI reports developed for our company. Now we have moved to other New implementation for the same company but in other country. ( Germany - Company Code - DE / France - Co

  • Lumix DSLR when mounted has .MTS files.  How exactly can I get those files

    I've got some .MTS files from video I shot on my Lumix GH1. The footage was 1080 24p and this is exactly the frame rate I would like to edit in. After a log&transfer with FCP, my files are changed to 29.9. Its been suggested to me that I use compress