Stuck "Profile for everyone" with password

Hi there,
I have one user who have an old "Profile for Everyone" on his MacBook.
I'm not able to remove the the profile, because it has "PayloadRemovalDisallowed"
by password set, and the pwd is not known anymore (the admin has left)... *Grmpfh*
Are there any ways to remove it?
Thanks in advance!

Diane,
The only Monitor profile you should ever use is a device-specific one created for your particular monitor.
If you have not calibrated and profiled your monitor, thereby creating a monitor profile in the process, used the canned one provided by the manufacturer of youor monitor.
Wo Tai Lao Le
我太老了

Similar Messages

JSPM: Error while detecting start profile for instance with ID _c.

Hi Experts,
we have an error when we start JSPM with message "cannot initialize application data. Error while detecting start profile for instance with ID _c." . Until now nothing has been updated yet. The system can be started up and shut down without any problem. The profiles are found in /usr/sap/PMA/SYS/profile
Our BI system is currently Netweaver 7.0 with SPS14. We plan to update it to SPS20. But when we start JSPM, we have abover error.
could somebody give a help? Thank you very much.
Rongfeng
P.S. the log file DETECT_SYSTEM_PARAMETERS_01.LOG:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!PATTERN[DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5^H#C000995FC0200000000000207BD47BD40004789C01294DB0#1258511336558#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#Java###Initializing JSPM data model...##
#1.5^H#C000995FC0200000000000217BD47BD40004789C01295968#1258511336561#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#Java###Detected profile directory .#1#/usr/sap/PMA/SYS/profile#
#1.5^H#C000995FC0200000000000227BD47BD40004789C0141AFE0#1258511338156#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#Java###Detecting the parameters of the database...##
#1.5^H#C000995FC0200000000000237BD47BD40004789C014205D0#1258511338178#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#Java###Executing command with arguments .#2#dbinfo#/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000247BD47BD40004789C01421570#1258511338182#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#Java###Java process ID , name has been started.#2#5#com.sap.sdt.dmt.main.DMT#
#1.5^H#C000995FC0200000000000257BD47BD40004789C01421958#1258511338183#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#Java###Command line: #2# #/opt/IBMJava2-amd64-142/jre/bin/java -cp .:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/sdt_dmt.jar:/oracle/client/10x_64/instantclient/ojdbc14.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jddi.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/opensqlsta.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/frame.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jperflib.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/util.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/opensqlsta.jar:/sapmnt/PMA/global/security/lib/tools/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/tools/iaik_jce.jar:/sapmnt/PMA/global/security/lib/tools/iaik_smime.jar:/sapmnt/PMA/global/security/lib/tools/iaik_jsse.jar:/sapmnt/PMA/global/security/lib/tools/w3c_http.jar:/sapmnt/PMA/global/security/lib/tools/iaik_ssl.jar:/sapmnt/PMA/global/security/lib/engine/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/engine/iaik_jce.jar com.sap.sdt.dmt.main.DMT -rootdir=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM -descriptor=csrt29_PMA -logfile=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01.LOG dbinfo /usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000267BD47BD40004789C01422128#1258511338185#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#Java###Standard out: #2# #/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01_01.OUT#
#1.5^H#C000995FC0200000000000277BD47BD40004789C01424838#1258511338195#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#Java###Process ID has been started.#1#5#
#1.5^H#C000995FC0200000000000287BD47BD40004789C014253F0#1258511338198#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#Java###Waiting for process ID , name to finish.#2#5#java#
#1.5^H#C000995FC0200000000000297BD47BD40004789C017402B0#1258511341454#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#Java###Process ID , name has been finished, exit code .#3#5#java#0#
#1.5^H#C000995FC02000000000002A7BD47BD40004789C01741638#1258511341459#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#Java###Command has been executed.#1#dbinfo#
#1.5^H#C000995FC02000000000002B7BD47BD40004789C017421F0#1258511341462#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#Java###Detection of the parameters of the database has finished. Database type is , database name is and database version is .#3#ORA#Oracle#10.2.0.2.0#
#1.5^H#C000995FC02000000000002C7BD47BD40004789C01744CE8#1258511341473#/System/Server/Upgrade/JSPM##com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#Java###Parameter has been detected. Parameter value is .#2#/J2EE/StandardSystem/DefaultProfilePath#/usr/sap/PMA/SYS/profile/DEFAULT.PFL#
Sorry, I don't know how to format post
Edited by: Rongfeng Shi on Nov 18, 2009 4:20 AM

Hi Rongfeng,
There is not much information about the error in the log file you have pasted above.
Please repeat the issue and catch the log files once again.
Are you able to open SDM ?
Best Regards
Raghu

How to select the printer and select the ICC profile for printing with VBScript?

I try to automate my printing procedure in photoshop. The problem is that I don't know how to select the printer and select the icc profile for printing with vbscript like I manually do in the print-menu in photoshop?
Anyone has done this before?
Thanx!
jus

Client/Server version:
- D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME

Profile for children, lock, password

Dear all,
does anyone know how to setup two or more profiles on the iPad?
For instance one you use (Business), one for the family (Fun), one for the small child etc.
How to "protect" those?
Password? Gesture? ...
Is there a feature already? Or does anyone using the iPad always have access to all apps etc.?
cheers
- Sheerkhan

Sorry, no profiles on the iPad. Everyone who picks it up will have access to the apps.
I have suggested to them via their feedback page to consider adding a feature like that to the next software release (4.0). 4.0 includes a folder feature where you can group applications, and I also suggested that they allow the creation of a "locked" folder which requires a pin# to access. That would allow someone to put sensitive apps in a protected area. But I don't know if they'll add something like that.

Safari 6.02 Lion not prompting for pdf with password

Hi,
Safari is no longer prompting for a password when the pdf is protected.
Firefox will prompt correctly for the same PDF and so does Preview.
Normal PDF's open fine in safari.

Just a normal DSL connection. Thank you for taking an interest.
Having puzzled over this for weeks before asking the question, I (sort of) solved it this afternoon within an hour of doing so. I found and deleted the safari plist file (not that easy a task because for some reason Finder doesn't volunteer to show my user/library folder). That also erased the developer menu, but Safari is now once again working as it should with iCloud and YouTube. Because I no longer have the menu to look at it, I can't actually prove that it's showing to them as the latest version, but it certainly looks like it.
Again thank you for answering.

Best MAC 10.6 Color Display Profile for use with Adobe Illustrator CS5

Hi everyone,
Which Color display profile should I choose for my iMAC (10.6) using Illustrator CS5? I need the colors to appear as accurate as possible when exporting PDF files.
Thank you!

Diane,
The only Monitor profile you should ever use is a device-specific one created for your particular monitor.
If you have not calibrated and profiled your monitor, thereby creating a monitor profile in the process, used the canned one provided by the manufacturer of youor monitor.
Wo Tai Lao Le
我太老了

Stuck Profile 2000k

Hi,
Been haveing problems with a stuck profile for just over a month now.....Not sure what to do next ....Before my profile got stuck i was getting 6.5 to 7mb from my 8mb connection now i cant get more than 2mb sob.... I've tried all the hints, tips and solutions on the forum ...Tried the test socket no difference....Tried the quiet line test - sounds clear to me...Checked the wireing i see no problems etc..
I only live half a mile away from the exchange .....
Download speedachieved during the test was - 1876 Kbps For your connection, the acceptable range of speeds is 400-2000 Kbps. Additional Information: Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM) IP Profile for your line is - 2000 Kbps
Line state Connected
Connection time 10 days, 12:42:35
Downstream 8,128 Kbps
Upstream 448 Kbps
ADSL Settings
VPI/VCI 0/38
Type PPPoA
Modulation G.992.1 Annex A
Latency type Fast
Noise margin (Down/Up) 12.8 dB / 24.0 dB
Line attenuation (Down/Up) 25.8 dB / 15.0 dB
Output power (Down/Up) 12.4 dBm / 1.7 dBm
Loss of Framing (Local/Remote) 0 / 0
Loss of Signal (Local/Remote) 0 / 0
Loss of Power (Local/Remote) 0 / 0
FEC Errors (Down/Up) 0 / 3
CRC Errors (Down/Up) 1442 / 0
HEC Errors (Down/Up) 5158 / 1
Error Seconds (Local/Remote) 1089 / 5

Hi I suggest you contact the Forum Mods this is a link to them
http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 72 hours
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

SD:Status profile for contract

Dear Friends,
I want to configure the status profile for contract with two status crtd (created) and rel (Release).please tell me how to configure the status profile and what is the significance of transaction control.
Is it possible to display the status in the contract overview screen instead of going by Goto-Header-status menu and how ?please suggest.
thanks in advance
ravi k

08.05.09
use t.code bs02 and create your profile as required and assign the profile to the document type. With transaction control you can control further transaction for the particular status.
regards

Creating profiles for special illuminants in DNG Profile Editor

I have successfully used the DNG Profile Editor with images of the ColorChecker Passport to create simple dcp profiles for daylight and tungsten illumination. I have obtained very satisfactory profiles using both a single image and the "both color tables" option, as well as two images (one tungsten and one daylight) and the "dual illuminant" method.
Now I wish to construct separate profiles for use with unusual light sources: fluorescent lights and white LED lights. Can some one tell me how this is best done using the DNG Profile Editor.
Appreciate any suggestions.
Mike.

When there are two illuminants in a profile ACR will interpolate an effective profile based on how far the actual image WB is from one of the illuminants in the dual profile. For example if the profile is using the 2650K (Tungsten) and 6500K (hazy sunight) as the two illuminants and your images is taken in direct sunlight with a WB of 5000K then the profile will be more the D65 profile but a little bit of the redder A profile mixed in. This allows the dual profile to be used for any lighting with a Temperature between A and D65 that also has a Tint number close to or a little above zero. An A/D65 dual profile fails for fluorescent lighting because the Tint number is quite a bit different than either the A or D65 Tint numbers.
To your question, for a single illuminant profile, you should use the Both Color Tables option so that no matter what WB your photo has, the profile used will be the same. This makes the illuminant A and D65 irrelevant because any interpolation between the two illuminants would result in the same profile numbers.
However, I also think that the dual illuminant numbers are not necessarily hard-coded to A and D65, at least not when you use the CCPP plug-in for LR to create the profile, but are actually whatever your photos WB numbers are, so you can make dual-illuminant profiles for other pairs of lighting, such as fluorescent and daylight or fluorescent and incandescent, or even sunlight and shade, depending on what mixed lighting you have at your location and time of day.
An easy way to test this would be to make a dual profile, one DNG being fluorescent and one being your blue LEDs (two sources far away from A or D65), then also create two single profiles, one for each of those same two lighting sources. Test the dual-illuminant profile with the fluorescent CCPP image, and then switch the profile to the single illuminant fluorescent one and see if anything looks different. Do the same test with the blue-LED CCPP image with dual and single blue-LED profiles.
If the look of the image is the same when using a dual profile where one end is the same as the single profile both tested with the actual CCPP image that was used to make the profile or one end of the profile, then the illuminant numbers in the dual profile change to whatever the DNGs illuminants were. However, if the look changes between the dual profile and the single profile when applied to one of the dual-profiles image's WB then the illuminant numbers must be fixed to A and D65, and so any dual profiles are useless if the two illuminants do not match A and D65.
If your experiment fails using the DNGPE, then try it using the CCPP software and the LR plug-in.

TS3899 I accidently turned ON contacts when I was turning ON my yahoo email account in settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name. Now I have double contacts for everyone

I accidently turned ON contacts when I was turning ON my yahoo email account in Settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name. Now I have double contacts for everyone with an email address!!! how do I UNDO? it says all CONTACTS WILL BE DELETED...when I go to turn CONTACTS to OFF.

Any contacts synced with the Yahoo account will be deleted from the phone if you turn it off. They will still be out there in Yahoo land, so if you turn it off and it deletes something you didn't want to, just turn it back on again.
It's extremely unclear what you did when you say " I only created contacts and typed in emails that I had for those contacts.....so I am still not sure how to UNdo what I did without deleting anything"
Undo WHAT, exactly? You said "I accidently turned ON contacts when I was turning ON my yahoo email account in Settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name."
Just turn it off.

Change with services get included in Settings for Everyone

Hello!
I've noticed that with Server 3, I can no longer delete VPN from the profile that gets created for Everyone. This makes the Settings for Everyone kind of useless because now an administrator is requried to install the profile because of the VPN. In ML/Server 2.2.2, I would simply delete VPN from the Settings for Everyone profile.
Is there a way in Server 3 to alter which services get included in the Settings for Everyone?
Thanks.
Tim

Hi Larry,
Apple's thinking here is definitely confusing, I'd rather everything auto push the way one would expect (and I'd like to be able to lock out the profiles setting on ios devices like I can on Mac os devices too...but that's a whole other conversation).
To answer your question about how to configure services in a group profile (user, not device group) like VPN, Contacts, Calendar etc, to match those that are preconfigured in the "Settings For Everyone" profile, you need to include an "Identifcation" payload in the profile. If you take a look at the "Settings For Everyone" Profile in profile manager, you'll see it has an "Identifcation" payload that uses a variable of %shot_name% in the "User Name" field.
In your group profile's identification payload, you simply need to plug in variables into the correct fields. A list of variables can be found at http://nwalker.org/2012/10/the-complete-guide-to-profile-manager-part-1/ and it's got some good information about getting started with profile manager
In our ident. payload, We've got User Display Name and User Name set to %short_name% and Email Address set to %email%. Leaving the password field blank will cause a prompt to appear on the user's computer when a password is needed.

Profile parameter for to change password

Hello everyone.
Is there any profile parameter to change the password after certain number of days say 30 days. I see there are profile parameters for lenght , uppercase, lowecase but is there one to change the password after a given period of time.
Thanks.
Neha.

> I checked the profile parameters using the program RSPARAM. But I am not able to find a parameter to prevent the old password from being used at least ten times. I also checked in the table TPFET.
>
login/min_password_diff min. number of chars which differ between old and new password
> And also can we prevent the password being same as user id.
>
> Should these parameters be changed in the deafault profile or instance or start profile.
>
It depends ... you may decide this by discussing with BASIS team and as per your Company SOP. I prefer Default profile. But never use Instance profile.
Please go through the following links:
[Password Rules|http://help.sap.com/saphelp_nw04/helpdata/en/d2/141fb593c742b5aad8f272dd487b74/frameset.htm]
[Profile Parameters for Logon and Password (Login Parameters)|http://help.sap.com/saphelp_nw04/helpdata/en/d2/141fb593c742b5aad8f272dd487b74/frameset.htm]
[Password rules and preventing incorrect logons|https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=2467&_NLANG=E]
[ Note 862989 - New password rules as of SAP NetWeaver 2004s (NW ABAP 7.0)|https://service.sap.com/sap/support/notes/862989]
[Logon and Password Security in the SAP System|http://help.sap.com/saphelp_nw04/helpdata/en/eb/4bb638b5358259e10000009b38f8cf/frameset.htm]
Regards,
Dipanjan

Hello there! am new to mac and had been using my mcbook pro for like a year now with no problem but last Monday, I started having concerns about my keychain access.. every time i open the mac it asks for my keychain password.. what can i do?

Hello there!
I am a new Mc Bok Pro user and had been using my mac since Sept, 2012 with no problem. Just recently however, I have been experiencing a Keychain access problem. Specifically, whenever I open the mac, it asks for my keychain password... Can I restore my mac to its condition before Jan. 18, 2014? What should I do?
Thanks everyone!
Georgem

This is only for Local Items key chain not Login Keychain.
“Local Items” keychain prompt?
Try this.
https://support.apple.com/kb/TS5362

Secure Zone password set (send log in details email) link not working for everyone

Hi Guys,
I have a site with three secure zones for different online programs. We're beginning to sell some programs and, because we aren't using a seemless gateway, we are manually subscribing them to the secure zones then clicking the 'Send log in details email' button. The email seems to be going out which is good. But, some clients can't click on the link to set their password. Nothing happens. Even if they copy and paste the link text into a browser window, still nothing.
Anybody know why this would be working for some people and not others. Could it be to do with cookies or email clients etc. We are at a loss and therefore have lost two sales so far (they asked for refunds) because they couldn't access their programs in the secure zone.
Any help greatly appreciated.

Thanks LiamDilley for such a prompt reply. Currently my code looks like this:
...and your password is [{tag_password}]
Are you saying that I should be changing the '[{tag_password}]' to:
[,a href="{tag_password}>{tag_password}</a>]
The thing is, most of the time the link text appears as a link, but not for everyone. Do you think this will fix it?

I have set up a new itunes library and am trying to sync this with my iphone. My iphone is asking for an 'exchange' password. I don't know what this is or where to find it.

I am trying to sync my iphone with a new itunes library. The iphone is askin for an 'exchange' password. I don't know what this is or where to find it.

Sounds like you do have an Exchange account setup on your phone. Have a Gmail or Hotmail account? They can both be setup as Exchange accounts. Have a work email account?

Stuck "Profile for everyone" with password

Similar Messages

Maybe you are looking for