Stuck Rebooting after Installing Lion

I just installed Lion onto my MacBook Pro. Now it's stuck in the restart! My screen shows a "no" sign (a slash encased in a circle). It's been at least two hours since it's happened. What do I do?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Similar Messages

Macbook pro won't reboot after installing lion

After installing Lion on a 2007 MacBook pro, it won't reboot. Just gets to the gray screen with the spinning wheel. Have tried re-installing and disk repair to no avail. Anyone else figured out how to fix?

alan81 wrote:
After installing Lion on a 2007 MacBook pro, it won't reboot. Just gets to the gray screen with the spinning wheel. Have tried re-installing and disk repair to no avail. Anyone else figured out how to fix?
Lion only runs on Intel based systems which have to be core2duo. with a minimum of 2GB RAM.
If these is given on your system, in most cases it comes from running old PPC-Applications which are not longer supported since Lion.
Try to start your MB in "Safe Mode" by holding option key (alt) imediately after first chime and disable / delete this applications.
Lupunus

Sound Problems After Installing Lion

I see many are having issues with sound after installing Lion. I have sound and then will lose sound after closing and reopening. I have to restart to restore sound. This is getting old quick. Does anyone know a fix or if one is coming? Thanks!

Not sure how much it helps, but here is my experience:
I have found that after a while, midi-style sounds stop playing. Most obvious to me is the crinkle tune when throwing away trash, or the click when placing something into the trash. When these sounds stop playing, I can still set the volume (and the up/down volume sounds will play) but the midi tracks don't start playing.
A while back I was hunting for a solution to this problem and rebooted and messed around, etc, etc. One person suggested changing the midi format since they knew there was a bug in the midi playback in Lion (a beta comment I think). So I used the Audio MIDI Setup application to change the Built-In Output format to 2ch-32bit float. For a while the sounds were back.
Just now, I noticed that they had disappeared again, so I went back to Audio MIDI Setup and changed it back to 2ch-24bit Integer. All of a sudden, a stream of old sounds started playing - presumably everything that had not been correctly played for a while.
Not sure if it will work again, but next time the sound vanishes, I will try to change the format again and report back what happens. My guess is that just changing the format will cause the queue to reset and play any old sounds. Then the sounds will work for a while until the bug is triggered again. Perhaps the workaround for now is to just keep flipping the Ouput MIDI format?

I have been having issues with my computer lagging after installing lion.

I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Slow wake up after installing lion (Macbook Pro 2010)

Hi there,
After installing Lion, my Macbook Pro 15" takes a lot longer to wake up from sleep than before (taking 10 or more seconds, instead of 2 seconds in Snow Leopard).
Am I the only one seeing this? I did a normal install (upgrade from SL) from the Mac App store. RAM is 8 GB.
Thanks!
FR.

I seem to have fixed this issue. I ran Disk Utility and it showed error in the file structure. I rebooted into to Lion Recovery partition and ran Disk Utility, did a repair, and now (for the time being) it wakes as expected without all the whiring fans and falling back off to sleepland.
One gotcha with the recovery partition boot is that it doesn't recognise Magic Mouse, and I had to dig out my USB mouse.
Hope this info is of some help.

HELP!!! Can't save in After FX after installing Lion OS!!!

So after installing Lion on my Mac Pro, I get this error message whenever I need to save. Projects have reached a stand still. PLEASE HELP!!!

OK, thank you for the clarification request. I'm using CS5.5. I ran updates to Premiere Pro 5.5.2 but didn't see an update for After FX. The version I'm using is 10.5.0.235. I believe that Lion forces a reboot after initial install, and then takes a bit to get everything in order after the restart. All I remember is that I restarted at least once during the process and it was when I was asked to reboot. Adobe was installed about 1 week before Lion. I re-installed Adobe when this problem arose, which was precisely after the Lion install. I have tried Save as, Save a Copy, but I will try saving to another folder. Premiere does not have this problem, but I noticed some peculiar locking of documents in Pages last night. What do I need to do to provide administrative permissions? Thank you for your help.

Having many problem with wifi....after installing lion......

Having many problem with wifi....after installing lion......it connect with wifi but not with Internet and at the same time iPad 2, iPhone 4 works smooth......help......I have MacBook air without thunderbolt and mac mini

I had the same problem last night. Boot into OSX and reboot the router - fine. Boot into Windows and wrong. Here were my fixes:
Firstly, I kept all the settings on my router solid. Just leave them as they are. Boot into OSX and check the Network settings and make a note of your IP address and the router's IP address.
Second, boot into Windows, then open up your wireless connection settings and navigate through to the properties where you can set the IP address.
Third: Set the IP address to your routers IP address changing the last set of digits to a value between 5 and 255 (I have 8 devices so I set the last two digits to 10.) This will keep the IP static.
Tab through the Mask settings to default those.
Then set the default gateway to your router's IP address.
Check that the Network Adapter's setting has IPv6 disabled (uncheck the box)
Finally: Set the primary DNS server to 8.8.8.8 then the secondary to 8.8.4.4 and then reboot the router.
That's what got my connection running.

Apache not starting after installing Lion

After installing Lion, my Apache local service doesn't start anymore.
in System Preferences > Sharing, the Web Sharing is not checked anymore.
If I (try to) check it, it try for half a second, and then is unchecked again.
No error message. I also reinstalled the last Xcode package, rebooted, nothing.
What to do? Thank you!

Commenting out that line simply disables mod_fastcgi (which might caus performance problems under a load).
In case you really need the mod_fastcgi to speed up apache2 you can easily compile and install it given you have the xcode development env installed.
(i've chosen the latest version which is a snap but still roughly 2 years old.)
cd /tmp
curl -O -L http://www.fastcgi.com/dist/mod_fastcgi-SNAP-0910052141.tar.gz
tar zxf mod_fastcgi-SNAP-0910052141.tar.gz
cd mod_fastcgi-SNAP-0910052141.tar.gz
cp Makefile.AP2 Makefile
make topdir=/usr/share/httpd
sudo make install
this will install the apache mod_fastcgi.so into apples apache2 install and you should be able to continue with a fastcgi setup.
So far this has worked for me w/o any problem.
cheers
udo

Is there a way to darken the dates (numbers) on ical. After installing Lion I can barely read the dates of the month in ICal

Is there a way to darken the dates (numbers) on the ICal calender. I can barely read mine after installing Lion.

I should note that the time stays on the left of the event name when I re-enter the text (which I had to do all the time before I found the "show event times" button) so I feel like there's a way.

Unable to load many web based games after installing lion

After installing Lion, I am unable to launch several online games (Pogo e.g.). What compatibility issues are being addressed?

I didn't think reinstalling was gonna do me any good except for getting rid of every single thing I have ever installed since getting this MBP. I'm thinking it has to be something that is on my computer causing this, especially since it only affects my ability to get to this one site and I only started seeing this problem yesterday.
So, I went ahead and disabled all my Chrome extensions and I don't have any Safari extensions at all. That didn't fix my issue.
I've been trying to run Sophos on here, thinking that maybe I've got a Trojan or some kind of malware, but it never seems to finish a full scan of my hard drive. That "Plugin" that I mentioned above has me very suspicious, except that whatever that is, it's been on my computer since basically when I first got it. Maybe it's malicious, or maybe it's just a poorly named piece of software. In any case, it got updated last night around 11pm, about the same time I noticed my problem. After trying everything I have, it's hard for me to overlook that as coincidence.
But, where do I go to gain more information about what that could be? I should mention that this MBP is basically my first Apple computer. I've been a PC guy (still am mostly) forever, but I finally dove in and got a Mac to start iOS development. So I'm sure there are ways to get more information than I am currently aware of.
Also, apologies if I posted this in the wrong forum.

Although I am new to mac, I am not new to computers and purchasing online. I can't sign into the App store after installing Lion. I have had to change my password 4 times in 2 days . I am so sick of this. I am trying to buy a tutorial for Lion.

I recently downloaded Lion and since have had nothing but problems with my new i-Mac. My problem with the App store is only one issue. Has anyone out there had any trouble with their components after installing Lion 10.7??????? After several hours on the phone with a tech my situation isn't any better. I think the tech is sick of talking with me. He was supposed to call me today and the phone never rang. He told me he was working on something to repair my problems and needed to talk with engineers. How long could that take???? If it wouldn't hurt the person who gifted me this i-Mac, I would give it back.

your itunes accoutn have nothing to d with your computer
you can go to any computer with internet access in the world and
login into your itunes account if you have the appleID and password
the itunes account is placed on apples itunes servers

Why can´t i connect to Windows servers after installing Lion?

Why can´t i connect to Windows servers after installing Lion?

Me too!
MacBook Pro 15" 2011, OS X Lion 10.7

Time capsule problems after installing Lion

After installing Lion, I need to regularly shut down iMac(Intel) in order to have Time capsule do the next backup. This method allows me to manually back up the automatic function to back up no longer exists. Also unable to connect to the backup disk.

Mine needs backing up immediately after its just backed up!! Its crazy!! IOS5 was supposed to be free but as a result I had to pay to upgrade to Lion then I had to pay to upgrade to iPhoto 11 just to be able to transfer photos from my iphone!! On top of this, Lion runs as slow as a PC, asks to backup constantly, I'm losing iDisk and iWeb next year and they've removed the bounce facility from Mail. Blinding. Well done Apple - who's brainwave was Lion and IOS5? Bill Gates?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

Fix for continuous reboot after installing Service Pack 3 in Windows XP

After contacting HP Technical Support and speaking to a supervisor we were able to solve the problem of Windows continuously rebooting after installing SP3. Here are the steps that fixed the problem with my HP Pavilion running on an AMD processor. The steps are actually fairly straight forward and easy....
Issue: The computer reboots continuously after installing Windows XP service pack 3
Computer reboots continuously after installing Windows XP service pack 3 on AMD systems. The problem is that with some configurations, SP3 causes the computer to crash during boot, and Windows XP, by default, is set up to automatically reboot when it crashes. That is why you end up in the endless rebooting scenario.
Cause:
On HP computers, the same Windows installation disc image for Intel processor based PC's is deployed for the AMD processor based computers as well. Because the original installation image for both Intel and AMD is the same, all have the intelppm.sys driver installed and running. That driver provides power management on Intel-based computers. On an AMD-based computer, amdk8.sys provides the same functionality for power management.
Symptoms:
Ordinarily, having intelppm.sys running on an AMD-based computer appears to cause no problems. However, on the first reboot after a Service Pack 3 installation, it causes a big problem. The computer either fails to boot, or crashes with a STOP error code of 0x0000007e.
You may not see the error code because the computer reboots too fast. In order to get the error message, you need to set an option during startup. To do so, open the windows advanced menu by tapping the f8 key on startup. Then select the "Disable automatic restart on system failure" option.
Solution:
If you have an AMD-based computer, however, you do not need the intelppm.sys driver and can disable it. There are three methods in order to do this.
Step 1: Please try to log on the system in safe mode.
1. While using Safe mode open the command prompt.... Start, All Programs, Accessories, Command Prompt
Run the following command in the command prompt just like it's typed: sc config intelppm start= disabled
Step 2:
If the issue persists, please try to log on or boot the system in recovery console (refer to the web document)
2. Using recovery console:
If you booted into the recovery console, from a command prompt, type: disable intelppm
Step 3: Please check in registry.
3. Using windows registry:
1. Run regedit
2. Click on HKEY_LOCAL_MACHINE
3. From the File menu, select "Load hive"
4. Navigate to %systemdriver%\Windows\System32\Config on the dead system and select the file name System
5. Name it something you can remember, such as "horked"
6. Navigate to horked\ControlSet001\Services\IntelPPM
7. Double click the Start value and set it to 4
8. If you did what I did and completely messed things up by running a disk check previously, navigate to ControlSet001\Control\SessionManager. Open the BootExecute value and clear out the autochk entries.
9. Repeat steps 6-8 for the other control sets.
10. Reboot
Reference:
http://support.microsoft.com/kb/888372
Additional information:
Computer Restarts after Displaying Stop Error 0x0000007E (After Updating with Service Pack 3 for Windows XP):
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01457284&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
For future reference: Service pack 3 Installation steps:
Before installing the service pack 3 update, please follow the steps listed above and save yourself much time and effort.
To uninstall service pack 3, I suggest that you uninstall it from add/remove programs.
Step 1:
Uninstall service pack 3 from add/remove programs:
1. Click Start.
2. Select Run.
3. Type appwiz.cpl in the run field.
4. Click OK.
5. Click change or remove programs.
6. Select the program -service pack 3 that you want to uninstall or remove.
7. Click Remove button.
8. It will pop up the message stating that "Are you sure you want to remove the programs".
9. Click Yes. It will help you to remove or uninstall the installed programs from add and remove programs.
Step 2: If the issue persists, I suggest you to perform system restore and then try to install the service pack 3 after performing the steps mentioned above in regards to removing the intelppm.sys Driver.
Using Microsoft System Restore in Windows Me and XP:
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph07103&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Step 3:
How to obtain the latest Windows XP service pack :
http://support.microsoft.com/kb/322389/
Steps to take before you install Windows XP Service Pack 3:
http://support.microsoft.com/kb/950717/en-us
I hope this helps someone who is having this problem. It sure took me a minute to get it all figured out. :0)

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

Stuck Rebooting after Installing Lion

Similar Messages

Maybe you are looking for