Stuck screen in adobe elements organiser, can't get to the top of the page

imac 27inc mid 2011
osx 10.9.3
processor 2.7ghz
memory 4 gb
adobe photoshop elements 11
the adobe organiser screen all works fine. I just can't get to the top of the page! I can broaden and narrow the screen, but not get to the top of the page.

If the issue is only happening with Elements, then please either post in an Adobe Elements forum or contact Adobe directly for support.

Similar Messages

  • IPhoto:  I clicked Enter Full Screen by mistake, now I can't get out of it. The button in View to exit full screen does not work.  I cannot see any other way to exit full screen.  In full screen, I cannot see my events, nor can I do any quick fixes.

    I accidentally got into Full Screen mode in iPhoto, and can't figure out how to get out of it.  The last item in View is unresponsive (Exit full Screen).  I've looked online but can't find any way to get out of iPhoto full screen--no arrows show on top right or bottom right.  I cannot find 'events' or crop photos, the only option I have is to scroll through a certain number of photos that I don't want to see.  Please, I just want to get out of Full screen mode.  Please help.  Thanks.

    Give this a try:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try full screen again.
    NOTE: For Mavericks and Yosemite,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

    Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
    I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
    If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
    Does Premier Elements 13 work with Windows 7?
    Thanks
    Terry

    Premiere Elements 13 absolutely works with Windows 7!
    In fact, I'd highly recommend you download the free trial and give it a test run.
    Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

  • Purchased Adobe Elements and can't find move tool?

    @purchased adobe elements and can't find move tool?forumnotifier@

    Your second post is blank. Assuming you bought PSE 12, the move tool is here:
    You need to be in Expert Mode to see the full toolbox. Click the word Expert at the top of the PSE window to go there.

  • MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work

    MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
    Disabled Recovery-must use syncing computer.

  • I'm using Ubuntu 11.04 The firefox menu-bar is on the top of the screen - how can I get it into the firefox window?

    Maybe I'm an idiot - this does seem a very simple issue. I can right click on the tab bar and check things like Navigation Bar, or Add-on bar and they all work fine - but the menu bar is stuck on the top of the screen and appears when I role over it. However, sometimes when firefox is automatically opened by some other application (LibreOffice) it comes up in a window with menu-bar onboard. I'm sorry if this is so obvious to everybody else - but it is irritating to me

    Try hitting '''F11'''.

  • I have windows ps elements 12. can i get a credit towards a mac version?

    i have windows p.s. elements 12. can i get a credit towards a mac version?

    If it was a boxed product you will have a Mac installation DVD in the package and can install it with the same serial number. If it was a download version and you are switching to Mac you can get a new serial number for Mac free - http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l.
    If you want to maintain the product on both platforms (you are allowed to two activations) then start a live web Chat with Adobe support and see what they have to say. http://helpx.adobe.com/contact.html - select product and a topic, then 'I still need help' and you will get a chat button.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • My iPhone 5 is stuck on the apple logo but has a load of white text on the top of the screen

    My iPhone 5 is stuck on the apple boot logo and has a load of white text in the top of the screen. It won't do anything! HELP PLEASE!!

    Hello robbie113,
    The following article provides steps that can help get your iPhone working.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it.  help

    I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

    Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

  • My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

    My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
    Ipad will connect no problem to other networks.

    First thing you need I think is to get your iMac connected to the Internet.
    Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
    After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
    If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

  • How can I get more of my persona to show at the top of the display screen?

    Before downloading the newest Firefox, my persona at the top of the display screen showed at least 1/2 of the firefox. Now it's only the ears. How do I show more of it? Stupid question, I know, but it's bugging me.

    You can add extra empty toolbars if you want to see more of the persona.
    You can create extra toolbars to get extra space via "View > Toolbars > Customize" or "Firefox > Options > Toolbar Layout"
    You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.

  • When I click on a link in an email I get the following message at the top of the screen: "Firefox prevented this page from automatically redirecting to another page...[Allow]. How can I stop this?

    When I click on a link in an email using gmail in the Mozilla brower, I get the following message at the top of the screen:
    "Firefox prevented this page from automatically redirecting to another page...[Allow].
    How can I stop this?

    # Press Alt+T
    # Select Options
    # Select Advanced Panel
    # Select General Tab
    # You will see option "Warn me when websites try to redirect or reload page"
    # Uncheck it as given in the screenshot.
    <img src=http://dl.dropbox.com/u/7456129/Firefox/advancedgeneraltab.jpg width=600px height=600px>
    ''<hr>Note: If anyone's reply has solved your problem, then please mark that reply as "Solved It" to the right of that reply after logging in your account. It will help us to concentrate on new questions.''

  • I inadvertedly changed a setting where the top of my screen no longer shows the apple logo in the top left or the clock and wifi status and strength on the top of the screen, how can I get it to show both of these things again like it used to?

    I inadvertedly must have changed a setting where the apple logo and files and things that used to be in the top left corner of the screen are no longer there as the clock and wifi status and other installed settings used to show up in the top right hand corner of my screen.  When I move my mouse to the very top of the screen they drop down but when I move my arrow away from the very top of the screen they both disappear again.  So I was wondering how can I get it to revert back to the way it used to be?  I hope this isnt confusing.

    I tried the zoom thing but it still didnt resolve my issue   Im gonna try to clarify my issue a little bit more, before the change, my screen when I would surf the web would have the apple logo and safari and file and edit and view buttons at the top left hand of the screen and the upper right hand screen would have the time and the wifi strength and my name and the spotlight box and a volume control but now they dont show while Im browsing the web unless I take my arrow and move it to the very top of the screen then those boxes will drop down like it used to be but when I take my arrow and move it from the top of the screen it disappears again and ll I get is a back and forward arrow and the url input bar.  Anyone else have any ideas of what I did to mess this up?

  • Ios7 clock app I can no longer see the time or cell signal at the top of the screen.

    I just updated to ios7  I have the iphone 5.
    I can no longer see the cell signal or time at the top of the clock app.  I actually have to leave the clock app to see what time it is or try to read the analog clocks in the time zone section.  I have a friend with a 4s, and they can still see the stuff at the top of the screen.  Help?  Is this a bug, or is there a setting I can change?

    This is what it loks like...no time or cell signal at the top

  • When I go on a song on my music on my iPod touch 4th gen I can no longer get the bar across the top of the screen which allows you to change which part of the song you are up to, how do I get it back?

    when I go on a song on my music on my iPod touch 4th gen I can no longer get the bar across the top of the screen which allows you to change which part of the song you are up to, how do I get it back?

    hello, please install the search reset addon - it will revert the most common customizations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/

Maybe you are looking for

  • Fetching SSIS error message into Audit table using SP

    Hi Experts, I want to fetch SSIS Error Info along with Task Name into Audit table 'Error_Info' column. This is nvarchar(max) datatype, i wrote below Stored Procedure for this (Column names passing dynamically in SP) CREATE PROC [dbo].[usp_AuditErrorH

  • Design Studio 1.3 - Concern

    Hello Community, With the release of Design studio 1.3 - the client expectation has gone up. There are few question that need to be addressed. How feasible is Design Studio 1.3 over SAP Dashboard designer in adopting and in implementation ? If the cl

  • JScrollBar inside a JTable

    I've got a JScrollBar inside a JTable, but the L&F is completely different to other JScrollBars that are not in a table. I'm using the WindowsLookAndFeel (through getSystemLookAndFeelClassName()) on Win2k. While progress bars displayed normally have

  • Misalignment between FEBA and GL account of the corresponding bankaccount

    Hi, For CCXXXX the balance in FEBA for the USD bank account does not agree to the balance in the GL account. The difference is too big to originate in the revaluation. According to the GL account, the balance is AUD 203.400, according to FEBA, the ba

  • Special tool for PDF file

    Is there any tool to check a PDF file to make : 1. it not printable; 2. not re-transmissible by internet; 3. after some days it auto-delete itself?