Stuck seriously in the blue print phase of project--- please help
I am Prabhas, sap XI associate consultant in capgemini. I am stuck in the design phase of my project.I am writing this mail to you for helping me in designing the blue print of my scenario. My scenario is like this.
XI will receive a flat file containing stock data and it processes by transforming the structure and then dump the data to R3 system. The output of XI actually invokes some function modules in the target R3 system which in turm executes some BAPIs for committing some transactions.I am clear with the flow and how to realize the process.But the problem is with the function module written to execute some transactions with the help of BAPI.Suppose for some reason one of the transaction commit is failed and the RFC adapter goes in error.Now the question is after correcting the error if we restart the msg in RFC adapter will it start executing the transaction in which it faced the error or the whole RFC will be executed again.
I hope the problem is clear to you.Please help in getting over this. Thank you.
Regards,
Prabhas
Prabhas,
A few quick questions~
1. How are you maing the RFC call? is it a single RFC call that will contain all the records from the file or are you going to make one RFC call for each record in the file?
The user of Recordsets permessage depends on this factor.
If you are going to make a single RFC call, then you cannot use Recordsets per message if there is some dependency in the records.
><i>You mean to ay that even some of the transactions which were committed before the error, we can undo them in RFC. If it is so i am clear with the point.</i>
Well if all records are going to be pushed into a single RFC call, then yes, your RFC code should be such that if there is some error whileprcoessing the call, it should be able to undo the same!
If it is the other option where you are going to make one rfc call per record, the issue will not arise, if there is some error, you can correct the same and restart the mesage from XI .
Regards
Bhavesh
Similar Messages
-
Does the book print gray pages? please help
i know within the book you can make a page a blank page with no photos, however i am using the contemporary template and you can have the option of three photos on a page. i like the way it looks with one photo all the way to the left and the other two spaces left blank. the problem is, the other spaces are left gray. will they print gray? will they print white? will it be auto adjusted for me when printed? i tried highlighting these areas and going to "blank" but it made the whole page blank.
Actually, it IS possibly to plain print gray pages or any color you like. Using Photoshop or any similar program, create a new document that is the size of your book pages, such as 11 by 8.5 (Photoshop command File>New...), fill the page with a solid color or anything you like (Layer>New Fill Layer>Solid Color...), then save the document as a JPG or other standard image format (File>Save As...). Then go back to iPhoto and import the colored page you just created (File>Import to Library...). Drag the imported page into your book and place it wherever you like. Similarly, you can print book pages with textures, stripes, pink polka dots, or any design you can imagine. Have fun!
-
Blue Print Phase Sign-off Document Template
Hello. Is there a template for the Blue Print Phase Sign-off Document? Thank you.
hi
As far as i know Blue print template difers from company to company
consult u r PM for the template
in blue print u have to document the TO BE process from AS IS after that u have to take the sign off from u r client core team
please correct me if i am wrong
regards -
Docments on BUSINESS BLUE PRINT Phase related to BW
Hi BW Guru's
I need docments on <b>BUSINESS BLUE PRINT Phase</b> <b>related to BW</b>
What are the prerequisites that we need to know before going for Business Blue Print Phase.
If you have documents mail me at [email protected]
Thanks in Advance
Thanks
Bhima Chandra Sekhar G
Message was edited by: Bhima Chandra Sekhar GuntlaTo,
All concern about business blue print.
There are four phases in project
Project preparation
Presentation of Enterprise Structure
Creation of Business Process
Prototype Presentation.
When it comes to project first step is
Project preparation.
Blue print
Realization
Final Preparation
Going live
SAP early watch services/ solution Manager.
we, will discuss specific to blueprint, the preparation is done of AS it is, and To be scenario. and based on the scenario Gap analysis is made, which is a critical factor in mapping process. Blue print is nothing but how we are going to map a organizational business process in a SAP system, and the detail documentation is called as blue print.
The following activities are required along with creativity while designing blue prints, along with the coordination with steering committee.
They are as follows.
Project Scope and Detailed Plan
Manage Project Scope
Organizational Change Management (Blueprint Phase)
Create and Implement Communication Plan
Training and Documentation Plan (Blueprint Phase)
Project Team Training
Attend Solution Manager Training
End User Training and Documentation Strategy
Finalize End User Training and Documentation Plan
Setup Development Environment
Install Hardware and Verify the Technical Environment
Install the SAP System Software
Install and Configure Output Devices
Configure and Set Up Remote Network Connection to SAP
System Administration Procedures
Establish and Verify Backup and Recovery Strategy & Procedures
Establish Client Copy Procedures
Establish Transport Procedures
Establish Database Administration Procedures
Business Process Blueprint AS-IS and TO-BE
Business Organization Structure Discussions & Approval
Business Requirements & Process Workshops
Clarify Deficient Areas
Determine Need for Extended Functions
Gap Analysis
Requirements Reports , Interface, Forms, Conversion , enhancement
Verify that Business Blueprint is Complete
Conduct Business Blueprint Review and Sign-Off
Development Procedures and Requirements
Development Procedures
Define Documentation Required from Developers
Approval Process Between Development and Functional Teams
Define Change Procedures for Use After Functional Approval
Define Naming Standards
Requirements Review and Development Approval
Review Interface Requirements
Review Conversion Requirements
Review Enhancement Requirements
Review Reports Requirements
Review Forms Requirements
Development Work Effort Analysis
Estimate Development Work Effort
Estimate Data Migration Effort
Estimate Legacy Data Extraction for Possible Conversion Effort
Review Development Requirements with Technical Team
Development Team Setup
Assign Development Team Members
Define Coordination and Communication Strategy
Review Development Support Requirements with Technical Team
User Roles, Authorizations Requirements and Design
Authorization Team and Requirements
Establish Authorization Team
Determine Scale and Scope of Authorization Requirements
User Roles and Authorization Design
Determine User Roles
Refine User Roles
Strategy for Master Data Management
Review Master Data Requirements & Sources
Determine required data not available in existing system
Prepare Plan to Cleanup Existing Master Data
Data Conversion Strategy
Define Data Conversion Requirements
Define Data Conversion Strategy
Business Blueprint Review and Approval
Sign Off Business Blueprint -
My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,
A Restore first downloads a new copy of iOS to your computer. On a slow Internet connection this can take a long time. How fast is your connection? How long would you expect it to take to download 900 MB?
That's assuming nothing is interfering with the download. Some firewalls and antivirus programs will block the download or slow it down. So you should temporarily disable your security software. Security software can also block the update after the iOS download is complete. -
Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.Might be a corrupted printer preference file ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences
Click Go
Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
Restart your Mac, restart the printer... -
i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!
Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.
-
I have a spelling app that is stuck on the screen - it doesn't have any way to close it out, and when I split the screen and go to "Finder" to remove it, it says that it can't, because the program is still open. Please help.
Paul,
I'm sure this is the correct answer, but just switched to Apple, so am just an apple seed at this point! :~)
How do I get to the Apple Menu?
Thanks!
KL -
Hello, when I tried to update my iPod with something in the settings, I noticed my PC couldn't detect my iPod. My iPod is now stuck on the "Connect to iTunes" screen. Please, help me fix this.
I think my iTouch was on 5.1.1 before putting an attemp to update.Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.
Nope. I do the same exact thing. If you have DVD's and blu-rays you can't download a free application called Handbrake. You can set it to Apple TV2 automatic format and they will come out as playable m4v's that can play I'm iTunes. All you have to do is turn on Home Sharing in both iTunes and your Apple RV and you'll be good to go!
-
Security Question - i can not change it - and i have forget the anwser what can i do please help me i'm new in iPhone
There should be a blue link to your rescue e-mail there. If not, you will need to contact iTunes support. See this article: http://support.apple.com/kb/HT5312
-
HT3669 Do you have driver for Samsung ML 1210 printer for mavericks? Please help!
Do you have driver for Samsung ML 1210 printer for mavericks? Please help!
I don't believe that Samsung ever made a driver for this model that worked in intel. Unfortunately, I think your printer is just too old. You can read here
http://technicalfault.net/2011/08/22/installing-the-samsung-ml-1210-printer-on-m ac-os-x-lion/
or else contact Samsung and ask them.
Cheers
Pete -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
My itunes in computer wont let me transfer my apps to my ipad. I have the latest version of itunes. Please help. When I press sync it says its syncing but at the end the apps are still not on my ipad.
I need help. Hope you could help me.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)
The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.
Maybe you are looking for
-
Terminal will not terminate after Yosemite upgrade
When attempting to close Terminal, or when attempting to logout or shutdown, the Terminal will not terminate, but displays the following dialog: "Do you want to close this window? Closing this window will terminate the running processes: ." Also, th
-
How to use 1 profile on server for multiple PCs
Is it possible to move an existing profile (at all!) to a home server and configure it as the default - if not only - profile on other installations on other PCs, thus avoiding sync-related plug-ins?
-
Downgrade 10.9 to 10.8.5 and iPhoto issues
Hi all :-) After upgrading to Mavericks from 10.8.5 i installed the new iPhoto and Aperture Versions and started them. I was asked to UPDATE my iPhoto Library File and i confirmed. Now the mess starts: I was trying all my apps and found that snapseed
-
HT201317 I have been waiting 2 hours for photos in photo stream to upload
I have been waiting 2 hours for photos to go from my iphone 4s to photo stream so i can turn on iPhoto in my computer and view them. they still have not appeared. this seems ridiculous to me. Can anyone impart to me what i am doing wrong?
-
Text within textframe disappearing once placing tiled background
Hello, I'm new with the creative suite and trying to navigate and learn! Super steep learning curve.. Here's my issue: The text within my text frames in InDesign disappears when I place a tiled background I created in photoshop. I've put the backg