Stuck with 50% cpu usage

I created a new thread for this problem because it has no relation to my first but does have similar symptoms.
Ok, every time I play a dvd audio disc the cpu spikes constantly to 61% then at some point it will keep 50% usage active despite not playing the dvd audio disc anymore(system is idle). By this time audio is puking anyway.
This also happens when I work on something that keeps exceeding the 50% cpu usage. At some point the 50% gets stuck and everything slows down and have to reboot.
At first I thought it was the soundcard now I suspect it is something else, since even in graphic applications it happens.
Win 2000 SP 3
875 neo fis2r
P4 3.06 HT enabled
4x512 ddr400 twinmos
1 80gig maxtor pata drive C
2 120gig seagate sata drives
1 18gig seagate cheetah scsi drive
samsung 48x combo drive
1 zip 100 drive
ati 9800 pro HIS
audigy 2
430 watts ps enermax

Performance is not really the issue. Since it is fast until it gets hit by the 50% bug.
I would have considered the interfaces too but that was with the older 50% problem. Problems with PATA/SATA/SCSI usually mean slow downs in transfer speeds and scratch disks. Getting stuck at 50% cpu usage seems like a bug.
Most people might not even encounter this problem unless the play dvd audio disks or use apps that peaks often.
I'm still worried with win2000 sp4. There has been issues with it.
Win 2000 SP 3
875 neo fis2r
P4 3.06 HT enabled
4x512 ddr400 twinmos
1 80gig maxtor pata drive C
2 120gig seagate sata drives
1 18gig seagate cheetah scsi drive
samsung 48x combo drive
1 zip 100 drive
ati 9800 pro HIS
audigy 2
430 watts ps enermax

Similar Messages

Queue consumer stops with 100% cpu usage

I'm trying to use Berkeley DB queue with transactions. When I tested what happens when transactions with DB_APPEND are aborted I found that while it works and DB_CONSUME correctly skips over rolled back records, unfortunately extents that have those records are never deleted, which causes database to always grow. Next I tried DB_CONSUME with database opened using DB_INORDER flag and it seems there's a serious regression in Berkeley DB that causes it to loop indefinitely with 100% cpu usage when it encounters a rolled back record. I tested various versions and found that this bug doesn't happen with 5.1.29, but it is reproducible with 5.2.42, so this regression might have been introduced in 5.2. I have also tested 5.3 and 6.0, and both have this behavior. There may be something wrong with the way queue records are rolled back, one indication of that would be that in 5.1.29 doesn't have neither of the two problems I found with DB_QUEUE: extents are deleted after being consumed, and there are no issues when consuming with DB_INORDER either.
You can find Python code to reproduce this issue here:
https://gist.github.com/snaury/027a3c546f5b0a62a440
Sorry for using Python and not e.g. C++, but it's a lot shorter that way.

We have looked at the issues and they are valid. We will roll the fixes out for this in our next release of BDB. The test case was very useful and really helped to speed the process up. If you have any questions, please contact me directly at [email protected] Thanks again for bringing this to our attention.
thanks
mike

A Projector with minimal CPU usage?

How do i make a Projector with minimal CPU usage?
Windows XP Pro SP3.
Director 11.5.
Using Windos Task Manager - CPU Usage History. I like to use less then 5%.

www.director-online.com - Ending CPU Hogging in Director
http://www.director-online.com/buildArticle.php?id=1122
UIHelper.x32 - xtra UiHelper
*sleep int timeInMs -- make this process sleep a while
on idle
sleep 1
end

Since 10.4.6 Update: "ATSServer" with high CPU-usage when opening PDFs

Since I've updated to 10.4.6 my system is very slow when I open PDFs (in "Preview" or "Acrobat").
This is caused by the process "ATSServer" which goes through every file in "~/Library/Fonts" (I have over 4.800 files there - but just a view are activated by "FontBook") and so it takes very high CPU-usage.
I didn't have this problem bevore the update and I didn't make any changes on my font settings.
I've cleaned the font cache, but it doesn't help.
Any ideas?
Ciao
Mephizo
PS: Excuse my poor English.
PowerBook G4 17'' 1.67 GHz Mac OS X (10.4.6)
PowerBook G4 17'' 1.67 GHz Mac OS X (10.4.6)

I haven't noticed any change myself, Dan, but I have the 2 GHz model.
One thing I HAVE noticed though after OS updates is that they can often result in a fair amount of file and free space fragmentation immediately after installation. OSX's routines will deal with fragmentation of small files , but not of large ones (over 20 Meg), and it won't deal very effectively with free space fragmentation. If your HD is getting full this can cause significant slowdowns, especially where video is involved.
You should also run DiskUtility and check for any directory and permissions issues.
Cheers
Rod

Having Issues with High CPU Usage with fluxbox & pekwm

Greetings,
I have searched for this issue and it seems that something similar has happened in the past with an old xorg, and it seems that someone is having a similar issue that they can point to kde as being the culrpit. However in my case, this is a fresh install and is not using any kde libs. Please allow me to explain the issue.
The power supply on my main computer finally gave out, and being incredibly poor at the moment I can not yet replace it. So, I pull out an older computer that I had once set up for my kids, but took it away from them when they were abusing it. I always make backup dvds and such monthly so I didn't have to worry about any lose of data, however I desired to keep my larger hard drives from my main computer. After testing to ensure that the hard drives were fine, I did some minor surgery, and did a fresh install of arch linux onto my back up computer. Since I prefer pekwm, I installed pekwm as my wm of choice, and outfitted it quickly with mpd+sonata, firefox, pcmanfm, and tint2. Then I rebooted into my pekwm 'desktop'.
It was running sluggish. Firefox was easily maxing the cpu up and beyond 100% and it felt ten times worse than any heavy DE I used in the past. I checked to make sure I had the right video driver installed. As this computer runs a 64MB nVidia GeForce2 MX with TV out video card, I searched nvidia's page and the arch wiki, noting that the driver needed is nvidia-96xx. Well I had already suspected that during install, and thus had installed such driver. I double checked my xorg.config and it has the right driver listed.
So I checked out some lighter browsers. I tried both Midori and Iron (which is similar to Chrome but without google spyware or whatever). Well both run better than firefox, Midori being the lightest one, but Iron quickly being my favorite. Still, the problem remained. Moving windows caused cpu spikes, opening more than one tab, or more than one program caused cpu spikes and the computer to slow down and sputter, freezing at times.
So I tried out another wm, fluxbos, which is another of my favorites. Seemed somewhat better but only fractionally, which I consider odd because pekwm has always seemed snappier than fluxbox to me in the past. Running lxtask (still mouse dependent, sorry lol), I was able to take note of the following...
FLUXBOX
lxtask 6% CPU usage average
PCManFM 5% CPU Average
Fluxbox 1% to 2% cpu usage
gksu 3% cpu usage
pidgin 3% to 7% cpu usage
firefox up to 62% cpu usage
midori up to 38% cpu usage
iron up to 50% cpu usage
mpd 11% cpu uage
Xorg (with no window movement) 2% cpu usage
Xorg (moving windows around) up to 80% cpu usage
PEKWM
lxtask 6% CPU
pidgin 7% cpu
tint2 1% cpu
pekwm 1% to 5% cpu
pcmanfm 7% cpu
firefox up to 85% cpu
python 1% cpu
midori up to 38% cpu
iron up to 25% cpu (odd...)
Xorg (with no window movement) 1% cpu
Xorg (when moving windows around) up to 80% cpu
Both were using around 118 MB RAm and weren't yet touching swap. As I see it I am thinking xorg or video driver related, yet I already made sure that I had the correct video driver. Here's my Xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jun 25 18:57:07 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Here's some specs on this computer, including video cards and such...
Computer
Summary
Computer
Processor Intel(R) Pentium(R) 4 CPU 1.60GHz
Memory 1034MB (239MB used)
Operating System Arch Linux
User Name mythus (Travis K. Randall)
Date/Time Thu 08 Oct 2009 05:24:52 PM CDT
Display
Resolution 1600x900 pixels
OpenGL Renderer GeForce2 MX/AGP/SSE2
X11 Vendor The X.Org Foundation
Multimedia
Audio Adapter ICH - Intel 82801BA-ICH2
Input Devices
Macintosh mouse button emulation
AT Translated Set 2 keyboard
Power Button
Power Button
PC Speaker
Logitech USB Optical Mouse
Printers
No printers found
SCSI Disks
ATA ST3160212A
ATA IC35L090AVV207-0
LITE-ON LTR-16102B
TSSTcorp CD/DVDW TS-H552D
Operating System
Version
Kernel Linux 2.6.30-ARCH (i686)
Compiled #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009
C Library GNU C Library version 2.10.1 (stable)
Default C Compiler GNU C Compiler version 4.4.1 (GCC)
Distribution Arch Linux
Current Session
Computer Name norova
User Name mythus (Travis K. Randall)
Home Directory /home/mythus
Desktop Environment Unknown (Window Manager: Fluxbox)
Misc
Uptime 11 hours, 38 minutes
Load Average 0.20, 0.38, 0.34
Kernel Modules
Loaded Modules
ipv6 IPv6 protocol stack for Linux
reiserfs ReiserFS journaled filesystem
usbhid USB HID core driver
hid
arc4 ARC4 Cipher Algorithm
ecb ECB block cipher algorithm
snd_seq_dummy ALSA sequencer MIDI-through client
rt2500pci Ralink RT2500 PCI & PCMCIA Wireless LAN driver.
snd_seq_oss OSS-compatible sequencer module
rt2x00pci rt2x00 pci library
snd_seq_midi_event MIDI byte <-> sequencer event coder
rt2x00lib rt2x00 library
snd_seq Advanced Linux Sound Architecture sequencer.
led_class LED Class Interface
snd_seq_device ALSA sequencer device management
input_polldev Generic implementation of a polled input device
mac80211 IEEE 802.11 subsystem
snd_intel8x0 Intel 82801AA,82901AB,i810,i820,i830,i840,i845,MX440; SiS 7012; Ali 5455
uhci_hcd USB Universal Host Controller Interface driver
snd_pcm_oss PCM OSS emulation for ALSA.
fan ACPI Fan Driver
cfg80211 wireless configuration support
ppdev
ehci_hcd USB 2.0 'Enhanced' Host Controller (EHCI) Driver
snd_mixer_oss Mixer OSS emulation for ALSA.
snd_ac97_codec Universal interface for Audio Codec '97
nvidia
lp
eeprom_93cx6 EEPROM 93cx6 chip driver
parport_pc PC-style parallel port driver
ohci1394 Driver for PCI OHCI IEEE-1394 controllers
parport
psmouse PS/2 mouse driver
ac97_bus
ieee1394
serio_raw Raw serio driver
8139too RealTek RTL-8139 Fast Ethernet driver
e100 Intel(R) PRO/100 Network Driver
snd_pcm Midlevel PCM code for ALSA.
pcspkr PC Speaker beeper driver
battery ACPI Battery Driver
8139cp RealTek RTL-8139C+ series 10/100 PCI Ethernet driver
snd_timer ALSA timer interface
i2c_core I2C-Bus main module
iTCO_wdt Intel TCO WatchDog Timer Driver
mii MII hardware support library
evdev Input driver event char devices
snd Advanced Linux Sound Architecture driver for soundcards.
ac ACPI AC Adapter Driver
iTCO_vendor_support Intel TCO Vendor Specific WatchDog Timer Driver Support
usbcore
soundcore Core sound module
sg SCSI generic (sg) driver
shpchp Standard Hot Plug PCI Controller Driver
snd_page_alloc Memory allocator for ALSA system.
processor ACPI Processor Driver
thermal ACPI Thermal Zone Driver
pci_hotplug PCI Hot Plug PCI Core
intel_agp
button ACPI Button Driver
agpgart AGP GART driver
rtc_cmos Driver for PC-style 'CMOS' RTCs
rtc_core RTC class support
rtc_lib
ext4 Fourth Extended Filesystem
mbcache Meta block cache (for extended attributes)
jbd2
crc16 CRC16 calculations
sr_mod SCSI cdrom (sr) driver
cdrom
sd_mod SCSI disk (sd) driver
ata_piix SCSI low-level driver for Intel PIIX/ICH ATA controllers
ata_generic low-level driver for generic ATA
pata_acpi SCSI low-level driver for ATA in ACPI mode
libata Library module for ATA devices
floppy
scsi_mod SCSI core
Display
Display
Display
Resolution 1600x900 pixels
Vendor The X.Org Foundation
Version 1.6.3.901
Monitors
Monitor 0 1600x900 pixels
Extensions
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
DRI2
GLX
Generic Event Extension
MIT-SCREEN-SAVER
MIT-SHM
NV-CONTROL
NV-GLX
RANDR
RECORD
RENDER
SECURITY
SHAPE
SYNC
X-Resource
XC-MISC
XFIXES
XFree86-DGA
XFree86-VidModeExtension
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
OpenGL
Vendor NVIDIA Corporation
Renderer GeForce2 MX/AGP/SSE2
Version 1.5.8 NVIDIA 96.43.13
Direct Rendering Yes
Processor
Processor
Processor
Name Intel(R) Pentium(R) 4 CPU 1.60GHz
Family, model, stepping 15, 1, 2 (Pentium 4)
Vendor Intel
Configuration
Cache Size 256kb
Frequency 1594.77MHz
BogoMIPS 3190.44
Byte Order Little Endian
Features
FDIV Bug no
HLT Bug no
F00F Bug no
Coma Bug no
Has FPU yes
Cache
Cache information not available
Capabilities
fpu Floating Point Unit
vme Virtual 86 Mode Extension
de Debug Extensions - I/O breakpoints
pse Page Size Extensions (4MB pages)
tsc Time Stamp Counter and RDTSC instruction
msr Model Specific Registers
pae Physical Address Extensions
mce Machine Check Architeture
cx8 CMPXCHG8 instruction
apic Advanced Programmable Interrupt Controller
sep Fast System Call (SYSENTER/SYSEXIT)
mtrr Memory Type Range Registers
pge Page Global Enable
mca Machine Check Architecture
cmov Conditional Move instruction
pat Page Attribute Table
pse36 36bit Page Size Extensions
clflush Cache Line Flush instruction
dts Debug Store
acpi Thermal Monitor and Software Controlled Clock
mmx MMX technology
fxsr FXSAVE and FXRSTOR instructions
sse SSE instructions
sse2 SSE2 (WNI) instructions
ss Self Snoop
ht HyperThreading
tm Thermal Monitor
up smp kernel running on up
pebs Precise-Event Based Sampling
bts Branch Trace Store
Memory
Memory
Total Memory 1034084 kB
Free Memory 94276 kB
Buffers 40536 kB
Cached 700112 kB
Cached Swap 0 kB
Active 170788 kB
Inactive 726844 kB
Active(anon) 74112 kB
Inactive(anon) 88348 kB
Active(file) 96676 kB
Inactive(file) 638496 kB
Unevictable 12 kB
Mlocked 12 kB
High Memory 139144 kB
Free High Memory 252 kB
Low Memory 894940 kB
Free Low Memory 94024 kB
Virtual Memory 2931852 kB
Free Virtual Memory 2931852 kB
Dirty 12 kB
Writeback 0 kB
AnonPages 156996 kB
Mapped 57392 kB
Slab 24260 kB
SReclaimable 18864 kB
SUnreclaim 5396 kB
PageTables 1376 kB
NFS_Unstable 0 kB
Bounce 0 kB
WritebackTmp 0 kB
CommitLimit 3448892 kB
Committed_AS 404212 kB
VmallocTotal 122880 kB
VmallocUsed 27648 kB
VmallocChunk 52368 kB
DirectMap4k 32760 kB
DirectMap4M 876544 kB
Benchmarks
CPU Blowfish
CPU Blowfish
This Machine 1595 MHz 50.176
Intel(R) Celeron(R) M processor 1.50GHz (null) 26.1876862
PowerPC 740/750 (280.00MHz) (null) 172.816713
CPU CryptoHash
CPU CryptoHash
This Machine 1595 MHz 11.071
CPU Fibonacci
CPU Fibonacci
This Machine 1595 MHz 74.202
Intel(R) Celeron(R) M processor 1.50GHz (null) 8.1375674
PowerPC 740/750 (280.00MHz) (null) 58.07682
CPU N-Queens
CPU N-Queens
This Machine 1595 MHz 132.704
FPU FFT
FPU FFT
This Machine 1595 MHz 104.630
FPU Raytracing
FPU Raytracing
This Machine 1595 MHz 212.639
Intel(R) Celeron(R) M processor 1.50GHz (null) 40.8816714
PowerPC 740/750 (280.00MHz) (null) 161.312647
So what I am wanting help with is finding the solution to the cpu usage so that I can use this computer at least until I can afford a new power supply or whatever. I am open to any good suggestions, though I must state I am not really interested in tiling wm's at the moment. I am just not a true minimalist.
Thanks in advance for any and all help. I understand that there is a lot of info in this post, but it is my hope that with this info the problem can be solved. If there is info I didn't provide that is needed, please let me know.

also check that you have
session.screen0.opaqueMove false
in your .fluxbox/init this will probably help a bit if it is currently true,
Last edited by Cyrusm (2009-01-26 13:52:13)

When I run activity monitor with no programs running my dock shows fluctuating usage...between 4% up to 20%. Random figures that come and go with corresponding CPU usage. A little help?

My activity monitor show random and fluctuating CPU usage at the Dock site with absolutelyno programs running. %'s fluctuate between 3 - 20 and they pretty much come and go. What might be causing this?

There's a lot of background processes running that aren't documented as Apps as such. And some of them are the Time Machine backups, Spotlight searches, all kinds of small little bits of maintenance caches, there's a lot going on. So it's not completely out of the question that this is 'normal' for a Mac. If it were 50% or more I would be concerned but if it spikes up to 20% for a second or two you are probably not in any trouble of any kind.

Beachballing and extreme GUI latency with low CPU usage

I generally only have two applications open. iTunes 11 playing MP3s of about 128kbps, and latest Google Chrome with up to 4-5 tabs. Usually I have gmail open, Facebook, and maybe 1-2 sites such as YouTube or Slashdot. I don't have any servers running.
The CPU load is usually 90% idle. The system load hovers around 1.5 for some reason. Though at times it jumps up to 3.5 even though CPU remains at 90% idle. I read a ton of Facebook pages. After about 30-40 page loads, Chrome stops letting me scroll. I can still click in the address bar, so I know the whole system isn't frozen. I can change tasks via ALT-TAB, however, when I do that, it takes 10 seconds for it to switch to Terminal. When Termianl is finally shown, it jumps to 90% CPU for a few seconds, and updates 5 times in a row, quickly, like a stuttering video, and then it is normal. If I activate Expose by moving the mouse to the bottom left corner, it shows the Dock right away, but then it just sits there frozen for 15 seconds, and then it shows the windows and whatnot. If I switch to the Finder and click on an icon, it doesn't do anything. I then click on another icon. Nothing. I then try to draw a bounding square on the empty desktop. Nothing. Then after about 30 seconds of being frozen, the system does EVERYTHING I did in a quick hurry. It selects the first icon, the second, draws a square, selects another icon.. etc. It seems to be queueing all my actions but not responding to them immediately. If I try to delete a file, the beachball shows up, and then after about 30 seconds it shows a progress bar, even for a tiny little text file, the progress bar takes 5 seconds, and then it removes it from the desktop. If I press Mac-T to open a new tab in Chrome, I get a beachball and it takes up to a full minute before the new tab shows up!
While all of this is happening I've been monitoring my system with top, the CPU keeps at 90% idle! And the load is usually below 2.0! I have a Core 2 Duo 2.1 gHz MacBook 13" with 2GB of RAM, and there's about 25 GB free on the main disk. There is also an external firewire drive connected. Every 5 minutes the Mac OS wakes up the drive from sleep even though I'm not using it, and while the drive is starting up the whole system freezes for 5-10 seconds again!!
What the **** kinda joke of an operating system is this?!?!!? I thought Macs were multitasking and everything! I'm seriously concerned.... I"ve never had these problems in Windows, and never had these problems in Linux. ***?!!!?! I can't use more than 5 tabs in Chrome either. It's way too slow. And most videos on YouTube I can't watch unless I lower to 340p or 240p, otherwise they freeze and stuff. Even though I have enough bandwdith.. The system can't handle the video. It's so frustrating. Oh and one more thing. While scrolling through pages on Facebook, iTunes pauses at random points as if it can't handle the scrolling.... ***??!?!?!
Please help me!!!

Hello? Does anyone from Adobe know why this is happening?
I understand why frames would be dropped if you set high
quality and your CPU can't encode in real time however the 30% cpu
usage I am getting while encoding isn't indicating to me I have a
cpu issue.
Also as a note when I change the quality settings at no point
can I get my CPU to actually get busy enough where I think frames
should be dropping.
Another side question. Is FME mult-threaded? We all know dual
cores are popular now. Also when I say 30% if its a single threaded
app, that would mean 100% = 2 cores, 50% = 1 core, so 30% of of
that 100% would be all on one core if its a single threaded
application.
This would mean perhaps the utilization is higher than
expected and frames are dropping perhaps.
Any insight would be great.
Thanks and take care.

Help with regular cpu usage spike

im running a VI thats reading data off a mouse through a VISA driver. i get these strange spikes in cpu usage which are regular at ~12-13 second intervals, which i haven't got a clue as to the cause.
any ideas??
Attachments:
cpu spike.jpg ‏73 KB

hi all,
thanks for the suggestions. ive looked with sysinternals, and it appears to be a very minor increase in labview cpu usage - i closed all antivirus related processes, and the spike still continues, so it doesn't appear to be that...
ive attached the vi, in case its some stupid coding issue..
apologies for being so ignorant, but how would i go about checking if it's some issue caused by a windows update or whatnot..
Attachments:
mouse_reader_no_output.vi ‏44 KB

Constant SBBOD with high cpu usage

Hi
since a couple of days ago I constantly get the SBBOD (spinning beach ball of death) on a Mac mini 2011 with Lion 10.7.3.
The system hangs up completely and the only this I can do is click around and move the windows but the clicks don't do anything and at some point after that everything just stops responding.
At this point I'm forced to do a hard reboot (power switch).
After that the system works for a while and then gets the SBBOD again.
During the SBBOD I can see syslog hogging all my cpu usage in activity monitor, but when I try to kill it or click into activity monitor the programm doesn't respond.
I guessed that something else was spaming syslogd with messages but after the hard reboot I don't see anything in console.
Since then I tried almost everything.
- hardware test, the short and long one -> nothing found
- repairing hard drive and permissions -> didn't help
- S.M.A.R.T says verified
- PRAM and NVRAM reset
- logged into guest account and started nothing -> SSBOD after ~hour
- started into save mode and left the comp running -> SSBOD after ~hour
- reformated(not zeroed) and reinstalled Lion(not from a backup) -> SSBOD after ~hour
Currently I'm trying to disable syslogd to see if some other process hogs all my cpu load instead of it.
I really hope one of you can help me, this thing is driving me nuts :/

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy – do not type – the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Macbook Pro Extremely hot with NO cpu usage

I have a Macbook pro 15" (Mid-2010). Recently my mac is running extremly hot specially when connected to the AC power.
I'm using iStat Pro to monitor sensors, and while charging sometimes CPU reaches 101 degrees celsius. When I detach the power cord, it stays at about 80-85 degrees. My cpu usage is normal, about 1-4%. All the bottom of my mac feels hot, specially under the CPU, but the middle parts too. Fans are also working with highest speed.
Is it a known hardware problem?
Another problem which I've had around the same time, I use "Hardware Growler" to check for usb connections. When I connect a USB flash disk, sometimes it shows a lot of connections and disconnections for Keyboard, Trackpad, IR Remote and stuff. Pushing the usb around doesn't show the same symptom, so it's not a broken board or connector or something.
Have you seen a similar problem? What can I do?

I've solved my problem by resetting PRAM and SMC. I'm writing my solution here so others can try it if they have the same problems.
To reset PRAM, follow instructions in this link: http://support.apple.com/kb/ht1379
and to reset SMC, follow this link: http://support.apple.com/kb/ht3964
I think my problem started when I upgraded Parallels Desktop to version 7 (from version 6). I'm not sure if it was the cause, but some kernel extension in parallels could've corrupted SMC and/or PRAM.

FCPX runs always with 100% CPU usage

Hi guys,
I have following problem or issue:
When i work with FCPX (10.1.4) i have some extreme performance problems with my machine.
iStats Menus always displays an 100% usage of CPU even if I am not working or doing anything, even my background tasks window does not display anything.
The project I am working on is 1080p 30fps in h.264 codec.
I tried projects in ProRes and i had the same problem.
I closed all windows and programs running: same problem.
Its not just the Mac runs slow its like unusable in some cases, i cant even close FCPX properly.
The system I am running is OSX 10.9.5 on a MacPro 5,1 with:
12 Core at 2,4 Ghz
24Gb 1333 Mhz Ram
500 Gb original Apple SSD
2TB Raid 1 HDD with 200GB free
3TB HDD WD Black 1TB free
GTX680 Mac Edition 2GB VRam
I hope you can tell me how i can fix this problem or minimize it as far as possible.
Cheers!

Then I would simply remove it and reinstall it. If FCPX comes with an uninstaller then use that. If not then see the following:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.

Java thread with high CPU usage

Hi,
Running prstat -L -p pid on Solaris produces a list of lwp threads running in that process that are consuming the most CPU. Out of about 7 threads that were associated with kernel threads in pstack output, only 5 of them were mapped to a JVM thread dump. How is it possible to have a Java thread consuming CPU that doesn't show up in a thread dump?
Thanks,
J.S.

And, any idea what this thread is doing?
Here's pstack output for this missing thread 12:
----------------- lwp# 18 / thread# 12 --------------------
fe0e48b4 __1cHCompileSflatten_alias_type6kMpknHTypePtr__3_ (b6001780, 100360, fe4c8000, b6001780, 100360, 0) + 4d8
fe0f42ac __1cHCompilePget_alias_index6kMpknHTypePtr__I_ (b6001780, 100360, b6001264, 7e2bb8, 41f4, 7e2bb8) + 8
fe11131c __1cJStoreNodeFIdeal6MpnIPhaseGVN_pnLPhaseDefUse__pnENode__ (0, 7dd5b4, 5035ec, 7e2bb8, b6001144, b6001264) + 128
fe0c1224 __1cMPhaseIterGVNNtransform_old6MpnENode__2_ (0, b6001144, 7e2bb8, b6001264, 7e2bb8, b600116c) + 47c
fe17349c __1cMPhaseIterGVNIoptimize6M_v_ (24, 0, a37700, b6001110, b6001100, 3442f0) + b4
fe1943b0 __1cOPhaseIdealLoop2t6MrnMPhaseIterGVN_pk0_v_ (b6000ee8, a3772c, 1, 4ff37c, 2000, 269568) + 7cc
fe1cc89c __1cHCompileIOptimize6M_v_ (b6001780, b60015b8, b6001780, b60015dc, 0, b60013dc) + a0
fe1cb69c __1cHCompile2t6MpnFciEnv_pnHciScope_pnIciMethod_ill_v_ (91f504, b6001800, db8a24, fe5296b4, b60018a0, b60018b0) + 7bc
fe1c73f8 __1cKC2CompilerOcompile_method6MpnFciEnv_pnHciScope_pnIciMethod_il_v_ (27b18, b6001af8, db8a24, db8938, ffffffff, 1) + 70
fe1c79fc __1cNCompileBrokerZinvoke_compiler_on_method6FpnLCompileTask__v_ (db8938, db8a24, fe4eacec, 0, 0, 8d9) + 40c
fe280964 __1cNCompileBrokerUcompiler_thread_loop6F_v_ (28758, 13a570, fe4c8000, b6001d10, fe4c8000, ffffffff) + 168
fe216200 __1cKJavaThreadDrun6M_v_ (b5e02000, fe4d3e34, fe4c8000, 1ffd70, 13a570, 1ffd70) + 3d8
fe213ec8 _start (fe4c8000, ff325d10, 0, 5, 1, fe401000) + 20
ff36b734 threadstart (13a570, 0, 0, 0, 0, 0) + 40

PSCS2 lockup with 50% CPU usage - never comes back

Hi, I've been trying to solve this very frustrating problem with no luck so far.
When I'm using custom brushes, often Photoshop CS2 will lock up and just churn using about 50% CPU and never unlock. I have to kill the photoshop process in task manager.
The source images for the custom brushes are usually no larger than 150 to 200 pixels in diameter. Is this too large?
My computer is Intel Pentium IV with 1 Gig RAM running XP.
I really hope someone can help me with this. I haven't had any luck looking around the forums so far.
I've tried playing around with the preferences file doing things like reducing the number of history states, changing the memory allocation number, deleting the preferences file, etc. Nothing of that sort seems to work.
Thanks in advance,
--James

150 to 200 pixels in diameter. Is this too large?....
Intel Pentium IV with 1 Gig RAM running XP.
Well, on your computer it is very likely too large. Sorry to say so, but the machine seems seriously inadequate for any kind of PS work and I definitely think that using excessively large brushes would kill it because the engine cannot accumulate and blend the individual "daubs" in memory before propagating them to the canvas as a stroke. In clearer words: You need much more RAM.
Mylenium

Timer-thread with xtreme cpu usage

Hi,
I have a loop which looks like this
while(true) {
ntime = my.format(newDate());
if(ntime.equals(trigtime) {
do_somezing();
well, this loop is in the public void run() and the problem is that it consumes the whole cpu.
is there a way to start something at a fixed time? Working with start in x hours is not possilbe it as to start at 17:30 for example......starting every x hour is much more friendly to the system...no wonder....as it put's the thread to sleep.
big thx
LoCal

You're not giving up any CPU time in your Thread. In any given Thread, you need to "rest" for some time to allow other processes on your computer to run:while (true) {
   nTime = myFormat(newDate());
   if (nTime.equals(trigtime)) {
      // do something
   try {
      this.sleep(200);
   catch (InterruptedException iE) {
      // Handle Interrupted Exception
That will wait 200ms between time checks. You can adjust this time as necessary.
Michael Bishop

FMS stuck on full CPU usage

Hi,
We are hosting a FMS3 server on a Redhat EL5. The Redhat EL5
is fully patched with Red Hat Network, and the version on the FMS
server is FMS3_0_2_r217. We are running the server a few months
without any problems so far. There are about 30 vhosts active on
the server.
Today the load of the server increased by a lot, and we saw a
process called 'fmscore' taking all CPU power (200%). When I
restarted the server, the problem returned. When I went to the logs
folder I saw the following entries:
-rw-rw---- 1 3188489 Oct 17 11:31 core.00.log
-rw-rw---- 1 10487959 Oct 17 11:30 core.01.log
-rw-rw---- 1 10487978 Oct 17 11:30 core.02.log
-rw-rw---- 1 10486128 Oct 17 11:29 core.03.log
-rw-rw---- 1 10520479 Oct 17 11:11 core.04.log
-rw-rw---- 1 10505753 Oct 17 11:11 core.05.log
You notice the time-stamps are within minutes from each
other, and each logfile is 10mb in size. When I opened the logfile,
I got the following messages:
2008-10-17 11:30:15 9407 (e)2581279 Assert failed in
/FlashPlayer6_02_FlashCom/shared_tcserver/tcparser.cpp line 109 -
2008-10-17 11:30:15 9407 (e)2581279 Assert failed in
/FlashPlayer6_02_FlashCom/shared_tcserver/tcparser.cpp line 109 -
2008-10-17 11:30:15 9407 (e)2581279 Assert failed in
/FlashPlayer6_02_FlashCom/shared_tcserver/tcparser.cpp line 109 -
2008-10-17 11:30:15 9407 (e)2581279 Assert failed in
/FlashPlayer6_02_FlashCom/shared_tcserver/tcparser.cpp line 109 -
This was set about 1000 times per second.
Does anyone know what can be the cause of this behavior, and
know what the solution might be to prevent this from happening?
Cheers
Nstuff

Bad data is that which cannot be parsed because it is not in
the expected format.
When using an "Arraycollection" this message could be
produced by incorrectly mixing AMF0 with AMF3 data types; I would
check this first. Another reason for this message is that a
variable exceeds the memory limit imposed on the data type.
Try to identify a minimal test case and report back with what
you find.

Stuck with 50% cpu usage

Similar Messages

Maybe you are looking for