Stuck with CDDB server connection
hello from belgium
I am stuck , not knowing how I need to connect to CDDB server. So my imported songs stay track1, track2 etc without a title unless I type him in myself via "file - get info"... see error msg below
"unable to connect to the CDDB server. the network connection was refused. make sure your internet connection is active and your network settings are correct. than try again."
please advice
thanks
wim
tried all of this.still no luck.
hmmm. are you on a home/corporate network running through a router, chris? if so (diagnostic suggestion, rather than a cure) try plugging directly into your internet connection rather than going via the router.
does a CDDB query go through?
(there's actually no need to import something to test this. just use one of those "Track 1"s in your library, by selecting the track and going "advanced > get CD track names".)
love, b
Similar Messages
-
There is a problem with the server connection.
there is a problem with the server connection.
this server is no longer exits, but when i'm using iphoto this popsup and i don't know how to solver itFollow the procedure on the page linked below to repair the database, and if that doesn't work, to rebuild it:
Rebuilding the iPhoto library
If you still have the problem after doing that, use the procedure on the page linked below to find and remove the invalid items:
Connection Failed, Server Does Not Exist -
Trouble with Content Server connection
I am having an issue with content server on Unix. I'm finished with content server install and need to connect my ABAP system to it via CSADMIN. But when I first enter CSAdmin, I give it my host and port. What is the unix http script name for the default install??? Only the Windows name - ContentServer.dll - is populated? What is the web address to get to the content server?
http://<host>:<port>/???????
Do I need to do something with OAC0 and SICF first, before going to CSADMIN. The guide does not mention anything?
Thanks for your replies!
JeffHi. I dont know obout CS on UNIX, on windows CS uses port 1090 and HTTP script ContentServer/ContentServer.dll
The web page is
http://server:1090/ContentServer/ContentServer.dll?serverInfo.
It's on Windows....
Also read this Note 586895. -->
New access paths and compatibility with Windows systems
The "/ContentServer/ContentServer. dll" and "/Cache/CSProxyCache.dll" paths have since been established as fixed default values for the Content Server/Cache Servers for Windows.
The module access in the Apache Web server is not restricted to actual paths for program files. Using <location> tags, you can determine any (sub)paths that are to be used to access a module. These tags are entered in the "httpd.conf" file within the relevant module configurations. You can also define the clients allowed to access this "location" within a <location> tag with an Allow/Deny clause.
To be able to continue using the Windows paths proposed in the SAP system, these Windows paths are installed as compatibility tags.
In addition to this, you can use the new, essentially shorter paths "/sapcs" and /sapcsc" to access the SAP Content Server and the SAP Cache Server.
The "Modifications to httpd. conf" attachment to the installation manual contains a list of all of the access paths delivered.
Regards.. Award if helpful.
Edited by: Sergo Beradze on Mar 11, 2008 4:37 PM -
Help with Application Server connection
I'm trying to create an App Server connection so that I can deploy directly from jdeveloper. When I try to test the connection I get the following error:
Error getting Cluster Config Set URLs for uri: deployer:cluster:opmn://<my host name>:6003/home/default_group
I've made sure that the app server is listening on port 6003, however are there any other processes that need to be started up?
By the way the App Server is version 10.1.3.1
and jdeveloper is version 10.1.3.2
Message was edited by:
user473633Did you select Single instance or Group on the Connection tab? With single instance the OC4J Component/Group filed needs to have home in it (assuming you want to deploy to home (better create a new oc4j container and not deploy your own apps to home)), with Group selected you need to enter default_group into the OC4J Components/Group field, when deploying it will ask you to which container you wih to deploy. Start the app server components with opmnctl startall or check the status with opmnctl status, opmn and the oc4j container where you want to deploy need to be running.
Regards,
Andre Jochems -
Issue with MSSQL server connectivity from ODI 10.1.3
Hi,
In one of the interface we are populating data to target table in MSSQL server version 2005.
The physical topology connection results successful.
Since so long there is no problem and it is running successful. But suddenly I'm facing issues with this.
I cannot see teh datastores under the model created for this table. When expanding the model, when trying to reverse the model or when I am trying to save any changes in the package I am getting the below error.
java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
at com.sunopsis.graphical.component.b.a.g.a(g.java)
at com.sunopsis.graphical.component.b.a.g.a(g.java)
at com.sunopsis.graphical.component.b.a.d.a(d.java)
at com.sunopsis.graphical.component.b.h.e(h.java)
at com.sunopsis.graphical.component.b.h.b(h.java)
at com.sunopsis.graphical.component.b.h.b(h.java)
at com.sunopsis.graphical.component.b.h.b(h.java)
at com.sunopsis.graphical.component.b.h.a(h.java)
at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame(SnpsSplitFrame.java)
at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode(SnpsSplitFrame.java)
at com.sunopsis.graphical.frame.bp.bN(bp.java)
at com.sunopsis.graphical.frame.bp.bL(bp.java)
at com.sunopsis.graphical.frame.a.is.bH(is.java)
at com.sunopsis.graphical.frame.bo.r(bo.java)
at com.sunopsis.graphical.frame.bo.bv(bo.java)
at com.sunopsis.graphical.frame.bo.z(bo.java)
at com.sunopsis.graphical.frame.bo.b(bo.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
I have verified below:
The SQL server version is: MSSQL server 2005
the "sqljdbc.jar" file is there in place "<ORACLE_HOME>/oracledi/drivers"
Java version: jdk1.5.0
There is no change in source or target db. Please help me to fix this issueHi,
Thanks for the reply. The link is helpful and its the same what is there in the environment.
"The JDK version is 1.5 and JRE version is 1.4.2."
But, this was working fine till last week. I am worried, if the issue is due to version compatability why we were not facing this issue before. There is no changes in the environment since go live of this interface.
Thanks, -
Trouble with Application Server connection/deployment
This is the output I get when testing the remote connection I set up:
C:\Program Files\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Program Files\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://costanza:1810/Oc4jDcmServletAPI/ ias_admin handmodel1 listApplications F:\ora9ias
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command listApplications F:\ora9ias UNDEFINED UNDEFINED UNDEFINED
Command = LISTAPPLICATIONS
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = b3e9da25826746e393a2ab6e17c30b9b
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=b3e9da25826746e393a2ab6e17c30b9b
Checking command status
HTTP response code = 500, HTTP response msg = Internal Server Error
#### HTTP response is NOT ok
Waiting for 30 seconds and trying again...
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=b3e9da25826746e393a2ab6e17c30b9b
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
Command output:
BC4J
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
BC4J
Does this look normal? When I try to then use this connection for deployment of War file I get this output:
---- Deployment started. ---- Oct 30, 2002 11:27:05 AM
Wrote WAR file to C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.war
Wrote EAR file to C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear
Invoking DCM servlet client...
C:\Program Files\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Program Files\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://costanza:1810/Oc4jDcmServletAPI/ ias_admin **** redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Command = INVALID_COMMAND
#### Invalid command: redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
#### Could not send command to Oc4jDcmServlet
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-6)
#### HTTP return code was -6
Exit status of DCM servlet client: -6
Elapsed time for deployment: 5 seconds
#### Deployment incomplete. #### Oct 30, 2002 11:27:09 AM
Anybody know why this thing doesn't work.Hi. I dont know obout CS on UNIX, on windows CS uses port 1090 and HTTP script ContentServer/ContentServer.dll
The web page is
http://server:1090/ContentServer/ContentServer.dll?serverInfo.
It's on Windows....
Also read this Note 586895. -->
New access paths and compatibility with Windows systems
The "/ContentServer/ContentServer. dll" and "/Cache/CSProxyCache.dll" paths have since been established as fixed default values for the Content Server/Cache Servers for Windows.
The module access in the Apache Web server is not restricted to actual paths for program files. Using <location> tags, you can determine any (sub)paths that are to be used to access a module. These tags are entered in the "httpd.conf" file within the relevant module configurations. You can also define the clients allowed to access this "location" within a <location> tag with an Allow/Deny clause.
To be able to continue using the Windows paths proposed in the SAP system, these Windows paths are installed as compatibility tags.
In addition to this, you can use the new, essentially shorter paths "/sapcs" and /sapcsc" to access the SAP Content Server and the SAP Cache Server.
The "Modifications to httpd. conf" attachment to the installation manual contains a list of all of the access paths delivered.
Regards.. Award if helpful.
Edited by: Sergo Beradze on Mar 11, 2008 4:37 PM -
Problem with Email Server Connection
When I try to read emails, the following appears: The connection to the server failed. This also locks the screen. When I click on the notice, it disappears and everything returns to normal until I start the process over. Does anyone have any suggestions for fixing this problem? Thanks in advance for your help....doc
I deleted icloud Email and email and note not connected with icloud email idont know how solve this problem
-
Help please with Client Server Connection
I have created a server and a client but I have no clue how to execute both on my computer. Can anyone please help me??
Problem solved!
It took:-
4 day's of discussing this issue with BT though the usual automated telephone answering palava and talking to at least 4 different support team people, all from/in another country with different understanding, communication and training levels.
Running numerous Line tests
Trying 3 different routers (including having to find the old ones in the shed!)
Checking speeds on an iMac, Macbook Pro, iPad and even a Playstation
Methodically checking the settings of the router detail by detail
Running other speed testers
Changing cables
etc. etc...
I finally realised that whilst my connection speed was 8mbps, BT had set an IP Profile for the line of 2mbps. This is not alway's obvious when you run their speedtester as that site doesn't alway's show it to you!
Having rung them again and told them of my discovery I now have between 6 & 7mbps and can hopefully watch steaming video without interuption.
An awful and unneccessary experience - Well done BT! -
Database Adapter with sql server connection cannot import user tables
Hi,
In jdeveloper 11g, I tried to create a sql server database connection, i could create the connection, i could see the tables and navigate through the data in
Database navigator section. But while trying to import the tables in the Database adapter to do polling operation, It displays only the system tables like this
syscolumns (dbo)
syscomments (dbo)
sysdepends (dbo)
sysfilegroups (dbo)
sysfiles (dbo)
sysforeignkeys (dbo)
sysfulltextcatalogs (dbo)
sysindexes (dbo)
sysindexkeys (dbo)
sysmembers (dbo)
sysobjects (dbo)
syspermissions (dbo)
sysprotects (dbo)
sysreferences (dbo)
systypes (dbo)
sysusers (dbo)
I am not understanding this wierd bahaviour of jdeveloper.
please advise.
-Chaitu
Edited by: chaitu123 on May 13, 2010 9:16 AMThis is NOT related solely to the SOA Suite. The same behavior appears in the Connections Navigator.
IMHO, this is related to how JDeveloper is parsing the .getMetaData() response.
Scott
Edited by: user8951683 on May 21, 2010 8:08 AM -
Problem with integrated server connection
My integrated application server is showing couldnot establlish connection in the application server navigator
in Clusters
oracle.rc.asadapter.weblogic.context.spi.ClusterProvider$1: Cannot establish connection.
at oracle.rc.asadapter.weblogic.context.spi.ClusterProvider.listBindingsImpl(ClusterProvider.java:83)
at oracle.rc.asadapter.context.spi.AbstractContextProvider.listBindings(AbstractContextProvider.java:133)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport$3.method(DefaultMutableAppServerContext.java:384)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport$MethodCall.invoke(DefaultMutableAppServerContext.java:421)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport.listBindings(DefaultMutableAppServerContext.java:381)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport.access$500(DefaultMutableAppServerContext.java:314)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext.localListBindings(DefaultMutableAppServerContext.java:207)
at oracle.rc.asadapter.context.spi.AbstractEventDirContext.listBindings(AbstractEventDirContext.java:185)
at oracle.adf.rc.spi.jndi.AbstractDirContext.listBindings(AbstractDirContext.java:214)
at oracle.rc.asadapter.context.spi.DefaultAppServerManageableContext.getManageables(DefaultAppServerManageableContext.java:58)
at oracle.jdeveloper.asnav.nodes.DefaultManageableFolder.loadChildren(DefaultManageableFolder.java:327)
at oracle.jdeveloper.asnav.nodes.DefaultManageableFolder$4.run(DefaultManageableFolder.java:288)
Caused by: oracle.rc.asadapter.connection.ConnectionException: Cannot establish connection.
at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10Jsr160Provider.getPresentation(Weblogic10Jsr160Provider.java:73)
at oracle.rc.asadapter.connection.AppServerConnectionImpl$PM.getPresentation(AppServerConnectionImpl.java:171)
at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10ServerMBeanModelImpl.getDomainRuntimeService(Weblogic10ServerMBeanModelImpl.java:59)
at oracle.rc.asadapter.weblogic.context.spi.ClusterProvider.listBindingsImpl(ClusterProvider.java:59)
... 11 more
Caused by: java.io.IOException
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10Jsr160Provider.getPresentation(Weblogic10Jsr160Provider.java:67)
... 14 more
Caused by: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://127.0.0.1:7101: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:178)
... 17 more
Caused by: java.net.ConnectException: t3://127.0.0.1:7101: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
... 25 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
... 31 more
Edited by: 980201 on Jan 6, 2013 9:39 PMt3://127.0.0.1:7101
the above IP look like default IP, Please check the target service listen IP and Port and Makesure "telnet 127.0.0.1 7101" is working well. -
I want to delete photos in the icloud from my pc and i,m following and understand the instructiones from your system, but in every time i must read a message - there is a problem with the server connection.
What is the solution or when will be solved the problem?
Best regards
Tunk2412Dear Carolyn,
thx xo much for your support, but the problem is not solved.
Thx so much to sent me the instruction comments for the customer support, but there is always coming a message......
"You cannot reset the photostream, because there is a problem with the server connection. Please try again later."
This message is coming since 4 days.
It will be very helpful, to get a message, when Apple will be solved the problem.
Thx so much.
Best regards
Tunk2412 -
"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date: 3/12/2015
Time: 12:26:04 PM
User: NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯ -
When I insert a CD into my computer, iTunes cannot get the track names before importing, I get the "Unable to connect to the CDDB server. The network cannot be reached." Bizarrely, however, once I import the tracks onto my PC and ask iTunes to 'Get Track Names' for the files in my library, it can do it fine. I am also able to access the iTunes Store without trouble.
Also, in what I'm sure is related, the Apple Software Update program does not work anymore ("The server could not be found"), so I've to manually download new versions of iTunes from the Apple website.
I've had this problem for months, and I've tried pretty much every solution I'd seen posted for similar problems (reinstalling iTunes, disabling my virus protection, updating Gracenote, ensuring the proxy settings are automatic) with no success.I've just tried putting my computer into Safe Mode (with netwroking) to check if there was some other program stopping it from working properly, but iTunes still acted the same. It's more of a minor inconvienience than a problem, seeing as I can just get track names after importing and update manually, but it's still pretty baffling.
-
Not connecting to CDDB server after upgrading to 7.7
This is the error message I get when trying to connect to iTunes store and even to get CD track names.
"Unable to connect to the CDDB server. The network connections timed out."
I have an internet connection and can browse without any problems. This occurred after I upgraded my iTunes software to the 7.7 version. I have tried most all possible solutions I have found online and still no success. I've tried allowing iTunes to work with the firewall, registering with Gracenote CDDB server, flushing the DNS settings, reinstalling iTunes, even tried to download an older version but then it does not recognize my iTunes library. I have restarted my computer multiple times over a span of 24 hours. I don't know what to do next. I'm trying to get more music for my ipod as I'm leaving for a trip soon.
Please help!
NinaAre you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting to the various services. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility and if necessary remove and re-enable the exception for iTunes (consult your utility's documentation for the appropriate procedure).
Hope this helps. -
I cannot get CD track names and keep getting error message 'cannot connect to CDDB server' anyone know a way around this?
ThanksI have included the full post as I connot take credit. But the following just worked for me. I have a 2013 model Macbook with iTunes 11.
Good luck.
JWMS1985
Re: Unable to connect to the CDDB server. The network cannot be reached.
Feb 12, 2013 4:05 AM (in response to NZDunc)
I do not know if you have this solved but I may have a solution. I have a MacBookPro early 2011 model with iTunes 11 installed. This is what I did to get it working;
1. Close iTunes
2. Open System Preferences
3. Clicked on Network
4. Select WiFi in the white column on the left
5. Choose the Advanced button in the lower right hand side
6. Press the Proxies tab
7. Choose Auto Proxy Discovery (a tick will apear)
8. Press Ok, then Apply on the Network section and close the window.
9. Relaunch iTunes and see if it connects
Hopefully it works for you.
Maybe you are looking for
-
I am setting up a local connection between 2 swf files embedded on a single jsp. if i run the application in a single window it works fine. but i open 2 concurrent windows, it throws me an error stating - Can't connect...the connection name is alread
-
When is camera raw going to support the Nikon D810? I have downloaded the beta version and I can open in camera raw but it not open in PS.
-
Hello all, I am attempting to load a java stored procedure I have written. It depends on some javax libs that are outside of the normal java library. I loaded these external lists into the database as sys and granted my user execute privelages to the
-
5.1 DCP from separate files
Hi there, Can you export a 5.1 DCP by using separate source files as input? I.e. a prores video file and then 6 discreet WAV files making up the 5.1? Everything runs in sync. Thanks, mab
-
Does anyone have experinced this?
Recently I have been experiencing a very annoying problem. All my icons have a writing on with the content of the icon. When I click on the icons to change the writing I cannot change it, instead the icon opens. If I click on a item inside the icon I