Stuck with iPhone4. Please help!!!!

I bought a iPhone4 Unlocked from Singapore last week. I was using it with StarHub(Service provider) for a week there. After that i bought the phone to India yesterday. I am using a Cellone(service provider in india)connection here. I made my sim to a micro sim using a scissor as i did earlier in Singapore. When I insert the Sim in the mobile i get the message "No Sim Card Installed". I then bought new prepaid sim cards of other service providers and tried doing the same thing again. But i was getting the same message. I did a reset from the phone by erasing everything. Now when the phone starts it gives the error "Insert a Valid Sim Card with no pin lock to activate iPhone".
I really dont know what to do from here. I appreciate if you could help. I ordered the phone online. So am confused whether they have mistakenly sent me a locked phone?

make sure your sim card is not locked when you insert it into the iphone. If you have a sim lock, you may have to insert the sim into another phone, then disable the sim lock and then reinsert it into the iphone and it should work nicely. give it a try.

Similar Messages

  • Im a little stuck with RMI please help

    Ok from the beginning
    Im running jdk1.5.0_09 its located in C:\Program FIles\Java
    The files are held in C:\java
    I have created a simple calculator program Code below:
    Calculator.java
    Calculator.class
    (code)
    public interface Calculator
    extends java.rmi.Remote {
    public long add(long a, long b)
    throws java.rmi.RemoteException;
    public long sub(long a, long b)
    throws java.rmi.RemoteException;
    public long mul(long a, long b)
    throws java.rmi.RemoteException;
    public long div(long a, long b)
    throws java.rmi.RemoteException;
    } (/code)
    CalculatorImpl.java
    CalculatorImpl.class
    (code)
    public class CalculatorImpl
    extends
    java.rmi.server.UnicastRemoteObject
    implements Calculator{
    // Implementations must have an
    //explicit constructor
    // in order to declare the
    //RemoteException exception
    public CalculatorImpl()
    throws java.rmi.RemoteException {
    super();
    public long add(long a, long b)
    throws java.rmi.RemoteException {
    return a + b;
    public long sub(long a, long b)
    throws java.rmi.RemoteException {
    return a - b;
    public long mul(long a, long b)
    throws java.rmi.RemoteException {
    return a * b;
    public long div(long a, long b)
    throws java.rmi.RemoteException {
    return a / b;
    (/code)
    calculatorserver.java
    calculatorserver.class
    (code)
    import java.rmi.Naming;
    public class CalculatorServer {
    public CalculatorServer() {
    try {
    Calculator c = new CalculatorImpl();
    Naming.rebind("rmi://localhost:1099/CalculatorService", c);
    } catch (Exception e) {
    System.out.println("Trouble: " + e);
    public static void main(String args[]) {
    new CalculatorServer();
    (/code)
    calculatorclient.java
    calculatorclient.class
    (code)
    import java.rmi.Naming;
    import java.rmi.RemoteException;
    import java.net.MalformedURLException;
    import java.rmi.NotBoundException;
    public class CalculatorClient {
    public static void main(String[] args) {
    try {
    Calculator c = (Calculator)
    Naming.lookup(
    "rmi://localhost/CalculatorService");
    System.out.println( c.sub(4, 3) );
    System.out.println( c.add(4, 5) );
    System.out.println( c.mul(3, 6) );
    System.out.println( c.div(9, 3) );
    catch (MalformedURLException murle) {
    System.out.println();
    System.out.println(
    "MalformedURLException");
    System.out.println(murle);
    catch (RemoteException re) {
    System.out.println();
    System.out.println(
    "RemoteException");
    System.out.println(re);
    catch (NotBoundException nbe) {
    System.out.println();
    System.out.println(
    "NotBoundException");
    System.out.println(nbe);
    catch (
    java.lang.ArithmeticException
    ae) {
    System.out.println();
    System.out.println(
    "java.lang.ArithmeticException");
    System.out.println(ae);
    (/code)
    Okies now you have my code ill start with the first error
    1. When i try to rmic calculatorimpl i get this error:
    error: Class calculatorimpl not found.
    2. I read somwhere that it auto creates the stubs for you, so i tried running: rmiregistry which ran up fine
    so i ran the server and got this:
    Trouble: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
    java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
    java.lang.ClassNotFoundException: Calculator
    can you please help

    Code tags are with brackets [] not ().
    You need to specify a classpath either as an ENVIRONMENT value (CLASSPATH=) or with the command line when you start your application (-cp).
    Then you are going to need a policy file or you'll get security errors. Use the standard "policy all" file found in the documentation.
    grant {
        permission java.security.AllPermission "", "";
    };start java
    -Djava.security.manager
    -Djava.security.policy=%YOUR_HOME%\Security\policy.all
    -cp %YOUR_HOME%
    name_of_your_class

  • Trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ?  Thank you

    trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ?  Thank you

    There is a version of Firefox 4 available for PPC Macs:
    TenFourFox 4.0.1 Firefox 4 For PowerPC Browser Released
    Version 4.0.1 of TenFour Fox, FloodGap's port of Firefox 4 for Power PC
    Macs that supports both Mac oS X 10.4 and 10.5. has been released.
    Mozilla.org dropped support for OS 10.5 after Firefox 3.6 and for Power
    PC with the fourth beta of Firefox 4.
    TenFourFox uses almost all the same code as Firefox 4 and has nearly all
    the same features, including faster JavaScript, WebM video, and HTML 5
    and CSS 3 support, as well as new and emerging Web features, but with
    the code needed to keep your Power Mac functional and fast. Out of beta
    and it's ready for action, versiob 4.0.1 is a performance, security and
    stability update incorporating Mozilla's Firefox 4.0.1 plus AltiVec acceler
    -ation for WebM and browser graphics, and G5 JavaScript acceleration.
    For more information, visit:
    http://www.floodgap.com/software/tenfourfox/
    Source: from http://www.applelinks.com - posted April 25, 2011)
    Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
    http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    But there is a workaround!
    Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
    Look/search (scroll down) for: tenfourfox.plugins.enabled
    Set it to true. (Double click it to toggle it)
    Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
    With SilverLight, Microsoft attempted to create their own version of what a replacement for Flash could be - but not to universal acclaim. You can read more about it here:
    http://silverlight.net/
    So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards) if you are using a PPC Mac, but even this will not work with Safari 4. Version 2 only works with Intel Macs and does work with Safari 4/5. The solution is to download and install the latest version of Flip4Mac, which now includes a Silverlight component:
    http://dynamic.telestream.net/downloads/download-flip4macwmv.htm
    But the latest news is that Microsoft will probably abandon Silverlight in favour of HTML5:
    http://www.appleinsider.com/articles/10/10/29/apples_ios_pushes_microsoft_to_dia l_down_silverlight_for_html5.html  and
    http://www.bbc.co.uk/news/technology-11673384

  • I just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

    i just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

    PS Here is a source for a keyboard.  Try it if you have not done so already
    http://m10lmac.blogspot.com/2012/12/new-mongolian-keyboard-layout.html
    For questions about why Word doesn't do something, try
    http://answers.microsoft.com/en-us/mac/forum/macword

  • I can't turn off find my ihone, always show "there was a problem when canceling the registration of this iphone with icloud" please help me. i can't restore my iphone before turn off find my iphone

    i can't turn off find my ihone, always show "there was a problem when canceling the registration of this iphone with icloud" please help me. i can't restore my iphone before turn off find my iphone

    If you are the original owner of the phone and know the Apple ID and password that were used to activate it originally, and if you have an existing backup to restore from, you can force it into recovery mode (which will completely erase it) and restore it as explained here: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support.  When you do you will encounter activation lock, and will have to provide the ID and password used to activate it originally in order to activate it again.  If you can't, you won't be able to activate and use it.

  • I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

    I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

    Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
    If answer is yes to all of these; contact Facebook.

  • My factory unlocked iphone 4s mms is not working with tmobile, please help...

    my factory unlocked iphone 4s mms is not working with tmobile, please help...

    Check out this link. It should fix the problem
    http://support.t-mobile.com/thread/17918?tstart=0

  • HT1296 my outlook calendar is not syncing with Ipad. please help

    my outlook calendar is not syncing with Ipad. please help

    I've got the same problem and no one is answering to it. call up the apple support and waited for almost 30mins before i can get help, after an hour they only keep asking me for account emails and stuff, end up getting nothing solved. Sad!

  • My iphone 3gs is not syncing with itune please help me

    my iphone 3gs is not syncing with itune please help me

    Did you ever get help with this issue?

  • HT201210 cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

    cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

    If you mean updae server
    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    Otherwise what server are you talking about

  • Hey there! well i from india and i m facing problem connecting my debit card to the itune store ,as the very option is not there, can someone guide me how to get it connected , i have a mastercard debit card with me .please help me

    hey there! well i from india and i m facing problem connecting my debit card to the itune store ,as the very option is not there, can someone guide me how to get it connected , i have a mastercard debit card with me .please help me

    if you are signed in to iTunes with your AppleID, click on the AppleID > view account > payment information > enter in your information

  • HT2534 im unable to get the none option while proceeding with itunes,,.please help me

    im unable to get the none option while proceeding with itunes,,.please help me

    Please help me understand your question. (What happens in vagueness, stays in vagueness.)

  • I lost some of my contacts after upgraded to ios6 on my iphone4, please help!

    I lost some of my contacts after upgraded to ios6 on my iphone4, please help!

    Backup is your best option if you have one. Reverting software will not bring the contacts back.

  • ?-mark folder on startup WITH cd stuck in slot - PLEASE help!

    Hi!
    I have a power Mac G4 cube with Mac OS 9.something. I'm not currently using it because we have a newer computer, but when I went to use it last night it showed me a question mark folder at startup and now I have a CD stuck in it that I can't get out.
    I've tried holding the mouse down at startup to no avail...
    Please help! How can I get my computer working again?

    if option doesn't work startup while holding down the left click on your mouse.
    is it trying to eject but it wont make it all the way out or is it simply making no noise at all?
    at one point i had to completely remove the dvd drive on my cube and remove a cd, hopefully your drive isn't completely dead.

  • Can't get music of my windows laptop onto my iphone4, please help?

    I'm not very good with technology, I'm trying to get my music from my windows7 laptop to my iphone4 but don't know how. I don't want to use itunes either. Please help me?

    KiltedTim wrote:
    What? Yes. You have to use iTunes. Install iTunes and import your existing music into your iTunes library. Why is that so hard?
    It's not hard, and apparently being lazy isn't either.

  • Huge problem with battery: PLEASE HELP!

    Please when you read this try to help, responses are appreciated.
    I have an iPod radio/clock/charger combo and for a while it has been working to charge and play. Just recently, as I disconnected the iPod to take it with me I noticed that as soon as I turned it on and the menu popped up the battery instantly drained and said "No battery remains. Please connect to iPod power source." So, I left it alone for about and hour and a half and tried again. This time the menu popped up and I could shuffle the songs but as soon as I pushed the next button it drained and I recived the message again. When I got home, I connected it to my computer and let it charge all night and the next day. I have been trying everyday but it seems as soon as I push two buttons it drains the battery. I have looked up topics and I get things like turning off the EQ, blacklight, and when not in use holding the play button. I do all of these things and I don't leave it in heat or extreme cold. Some of the topics suggested purchasing a new battery but the consequense of losing all playlists and songs is alarming to me. My iPod is completly full and I DO NOT want to add the all back. Yes, I have them backed up. It WILL play and charge on the docking station and the cord to the computer.
    Is there any other ways out there for me to fix this problem?
    Should I download the 7.1 version of iTunes?
    Is it because I use Limewire in addition to iTunes?
    Please help me, I will be needing my iPod soon on my NYC trip.
    Thank you!
      Windows XP  

    Step One: Did you try doing a RESET on the iPod to see if that helps?
    When connected to a power source, are you able to use the iPod, navigate the menus, play tunes?
    In the meantime, you might try the diagnostics menu on the iPod (while plugged in of course). I forget what is in that menu, but you do a reset and as the iPod starts up with the Apple logo screen, push and hold the center and left (back) buttons at the same time. It should dump you into a diagnostic menu and you can either run automatically through the tests or manually pick which tests.
    If you get stuck in any menu or test, you can always dump out by holding down the center and menu buttons again to do another reset.
    Patrick

Maybe you are looking for