Stuck with run mode

Hi
I am stuck with run mode on one of my VI (I can't edit it or even see the diagram). here's what I verified
1. tools>option>miscellaneous> I uncheck "Open VIs in run mode"
2. I hit Ctrl+M, it is still in run mode
3. I close LabVIEW and reopen, it's still in run mode
4. I check the VI file type, it's not a read only
Do u have any idea about how I can go back to edit mode to modify the diagram? I'm using LabVIEW 7.1
Thanks

Without having the VI in front of me it is difficult to say exactly what settings you have turned on.
I would suggest trying the following things to get your VI out of run mode.
1) Ensure that "Open VIs in Run Mode" is turned off in Tools->Options->Miscellaneous
2) Open the VI by dragging it into another block diagram and double clicking on it
3) With the VI open hold down control and press the '.' key. This is the same as pressing the "Abort" button.
4) Hold down control and press 'M' to switch out of run mode
If you can reproduce the behavior in a VI which you are able to post on the forum, I am sure we will be able to figure out what steps are needed to edit the VI.
Scott Yellig
Applications Engineer
National Instruments

Similar Messages

Material Replication from R/3 to SRM - Object status stuck in Running mode

Hi Experts, I am new to this Forum and I am facing the following issue,
System Info :
SRM 5.0
ECC 6.0
I am trying to replicate two materials from the backend R/3 system and have set material filters on the SRM side.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM13, inclusive defined.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM113, inclusive defined.
This is my sequence of operations in SRM:
I deleted exisiting queues, started initial load and then activated the inbound Queues for my client.
Then when checking, Monitor Load objects in SRM, the status for Material is stuck in Running mode with an yellow sign.
Please let me know if you have any advice.

Hello,
First of all, check RFC queues in transatcion SMQ1 and SMQ2 for any detailed information.
Make sure if Your RFC user has SAP_ALL authorisation - if not add it and delete all material queues and run again.
Make shure if You run report BBP_PRODUCT_SETTINGS_MW with proper option and unchecked "Test mode". Once you have done this rerun your initial load for DNL_CUST_PROD0, DNL_CUST_PROD1, BASIS3 and MATERIAL.
Regards,
Marcin Gajewski
Please reward points for helpful answers.

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

If you didn't back it up, your data is gone. There is no "solution" after the fact.

I'm stuck in run mode in the editor.

I ran my VI by itself in 6.1 and now my cursor is a finger and I can't edit anything. I've tried toggling between run mode and edit mode and I'm still stuck. Any ideas?

Is it password protected or locked? Look at the VI Properties>Security options. Is it read only? Did you accidently save it without a diagram? Is the tools menu set for Automatic Tool Selection or have you turned that off and selected the operate tool? Pressing the tab key will cycle through the various tool selections or just click on the Automatic Tool Selection button.

Stuck with Management mode firmware upgrade..see pic

Management Mode
Firmware Upgrade
File Name:___________________ Browse
Apply Reset
How do I get around this. I upgraded to WRT54Gv5v6_1.02.5.002_fw.bin and now when I reboot this is all I get. If I try to go to another version I don't get connectivity. I only have connectivity for this part then I lose it.
Every time I type in 192.168.1.1 I always get this display....
I've tried to hold the reset up for 30sec the first time then 1min.......then unplug for 10 to 20 seconds, (still holding down the reset button) and reconnect. Letting go of the reset button once it's connected.
Is the router gone? Will I have to get another one? Would like to get your input.
Thanks

Download firmware file again. And browse for it, and upgrade it. Reboot router, it might work.

OpenScript Test run from OTM is stuck with Running Status

Hi! I am trying to run OpenScript scripts from OTM but when running them, it does not do anything. OpenScript is not launching. The status is fail.
I stopped the Oracle Application Testing Suite Agent Service and configured it to Manual. I followed the rest of the instructions on how to get OTM to run OpenScripts.
At the run history it show summary as: schedule.execution.error.agentconnectfail
Please help! very much appreciated!

Hi,
Check whether port 9001 is open in client and server machine
Regards,
Deepu M

Stuck with the recovery mode - unknown error 3004

I recently tried to update my ipad mini 2 ios forn 7.0.4 to 7.1. everthing goes fine untill i downloaded the updated software through itunes 11.1, it ask me to restore ipad and intall software then 'the ipad could not be restored. an unknown error occured(3004)' appears..my ipad mini 2 stuck with recovery mode, can't go beyond that..help me..my internet connection is fine. there is no problem to connect to the itunes store. i am using windows 8.

This is usually realted to itunes not being able to reach Apple's update servers. Read here for details and troubleshooting tips: http://support.apple.com/kb/ts3694#communication

My iPhone 3g is stuck in recovery mode. When I connect to iTunes to restore it shuts off with only 4 mins. left. How can I fix this?

My iPhone 3G is stuck in recovery mode. When I connect to iTunes to restore it (It takes about 20 mins) it shuts off with only 4 mins left. Can this be fixed?

unhappy@apple wrote:
but t say's that it will delet all the my stuff i have on their, can i get some other way?
Not if it is in Recovery mode.
-> http://support.apple.com/kb/HT1808
You can restore from backup.
-> http://support.apple.com/kb/HT1766

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help!

I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??

Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.

My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen.

My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen after update os7 to os7.04
My phone is completely disabled, what can i do ?

Connect to iTunes. The phone is in Recovery mode. Follow the directions in this support document. http://support.apple.com/kb/HT1808

My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

HT201210 I tried to update my iPad 2 with the iOS 6.0. Now I am stuck in restore mode and keep getting an unkown error 3014 and sometimes -1. What in the world can I do?

I tried to update my iPad 2 with the iOS 6.0. Now I am stuck in restore mode. I get "unknown" errors 3014 and sometimes -1. Any ideas?

Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.

I have an emac running 10.5.8 I purchased snow leopard to upgrade. during the attempt to install, the computer says this is not an intel and is mot supported. i think this is a power pc? am i stuck with this 10.5.8 version or is there away i can upgrade

I have an emac running 10.5.8 I purchased a copy of snow leopard from apple. upon attempting the install i read that the computer is not an intel. I believe this is a power PC? Is there a way to upgrade to the snow leopard or am I stuck with this version 10.5.8? Thank you for any help.

As Niel says, no way to go past 10.5.8 on your Mac, but there is a more upto date Browser...
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/

Stuck with run mode

Similar Messages

Maybe you are looking for