Stucked during 37.th step when instaling  BI system

When instaling  BI system I am stucked during 37.th step (Install software units.)
What could be the reason? Should you need additional questions do not hesitate to ask.
The message is :
"An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog: SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS.
In u201CView logu201D I have:
ERROR 2009-07-09 00:00:35.671
FJS-00003  uncaught exception: nw.sdm.deploymentErrorWithLog:
SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)
ERROR 2009-07-09 00:00:37.375
FCO-00011  The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was executed with status ERROR ( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog:
SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)).
The end section of u201CC:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.logu201D file is:
Jul 9, 2009 12:00:29 AM  Info: Begin of log messages of the target system:
09/07/09 00:00:13 -  ***********************************************************
09/07/09 00:00:15 -  Start updating EAR file...
09/07/09 00:00:15 -  start-up mode is lazy
09/07/09 00:00:15 -  EAR file updated successfully for 63ms.
09/07/09 00:00:15 -  Start deploying ...
09/07/09 00:00:15 -  EAR file uploaded to server for 79ms.
09/07/09 00:00:29 -  ERROR: NOT deployed. The Deploy Service returned the following error:
                     For detailed information see the log file of the Deploy Service.
                     Exception is:
                     com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
                          Nested exception is:
                          java.net.SocketException: Connection reset
                     java.net.SocketException: Connection reset
                          at java.net.SocketInputStream.read(SocketInputStream.java:168)
                          at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
                          at java.lang.Thread.run(Thread.java:534)
09/07/09 00:00:29 -  ***********************************************************
Jul 9, 2009 12:00:29 AM  Info: End of log messages of the target system.
Jul 9, 2009 12:00:29 AM  Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 9, 2009 12:00:29 AM  Error: Aborted: development component 'caf/eu/gp/ws/msosrv'/'sap.com'/'MAIN_APL70VAL_C'/'963790'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
     at java.lang.Thread.run(Thread.java:534)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jul 9, 2009 12:00:29 AM  Info: Starting to save the repository
Jul 9, 2009 12:00:31 AM  Info: Finished saving the repository

Hi
Check this [Link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc49a7fb-0701-0010-88bf-f45221a97d15?overridelayout=true]
btw what is the JDK version installed ?
Regards
Uday

Similar Messages

  • The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit

    The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.

  • Windows 8 installation gets stuck during create partition step in bootcamp. Any suggestions?

    windows 8 installation gets stuck during create partition step in bootcamp. I tried to restart the bootcamp with same results. I have given it more than 6 hrs for last 3 times but I was able to go past this step previously where I got stuck during registering windows8.

    Hi,
    According to your description, it seems that your all Windows 8.1 computers connect to network via normal wireless network.
    Did you have wireless router for them?
    Please delete this adhoc, then check if these computer could connect to network.
    If no, follow below guide to create and connect to adhoc :
    Create adhoc in Windows 8.1
    http://tipsandtricksforum.com/thread-210.html
    connect to adhoc with Windows 8.1 
    http://social.technet.microsoft.com/Forums/windows/en-US/56ff83ff-1f15-4fc1-aa37-6651340d46fa/windows-81-connecting-to-ad-hoc-networks
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Karen Hu
    TechNet Community Support

  • During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.

    During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.

    Nobody can tell you anything. You have not provided any proper system information or even told us what you are actually downloading.
    Mylenium

  • When installing a system upgrade, do i need to backup my files, photos, etc. first?

    When installing a system upgrade, do i need to backup my files, photos, etc. first?

    No, you don't need to, but it is highly recommended. Upgrades can fail, the computer may fail, the may be a power outage, etc. Never be without a current backup. Never upgrade until after you make a backup.
    I recommend making a bootable backup by cloning:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • Why does Installer stay stuck on password enter screen when installing apps?

    When installing apps through Installer (from .dmg disk images and .pkg packages), everything works smoothly until it asks me for a password. When I enter it, Installer goes back to the screen before it asked me for the password. When I click next, it asks me for my password, and the cycle repeats. I tried removing my password to no avail. I can install .pkg files from the sudo installer -pkg command. I dont know how to do this for installers that are in app form.

    Same issue when trying to unlock locked preference panes in System Settings. Here is the log.
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Got user: DK
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Got ruser: (null)
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Got service: authorization
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in od_principal_for_user(): No authentication authority returned
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in od_principal_for_user(): failed: 7
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Done cleanup3
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Kerberos 5 refuses you
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in od_record_check_pwpolicy(): retval: 0
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in od_record_attribute_create_cfstring(): returned 2 attributes for dsAttrTypeStandard:AuthenticationAuthority
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Establishing credentials
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Got user: DK
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Context initialised
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Got euid, egid: 0 0
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done getpwnam()
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done setegid() & seteuid()
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): pam_sm_setcred: krb5 user DK doesn't have a principal
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done cleanup3
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done seteuid() & setegid()
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done cleanup4
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): pam_sm_setcred: ntlm
    Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): pam_sm_setcred: no domain found skipping
    Apr 20 21:38:13 DKMBP com.apple.SecurityServer[24]: UID 501 authenticated as user DK (UID 501) for right 'system.preferences.accounts'

  • Crash when installed on system that formerly had Pinnacle hardware

    Encore 2.0 (but not 1.5) consistantly crashes when installed on a
    system which has the RALcodec codec installed (My system is a dual 2.8 Ghz Xeon Dell under Windows XP SP2). This codec is installed by a variety of Pinnacle hardware installations such as the DC-1000 and DC-2000. It remains active on the system even after removal of these devices. The symptom is an Application Error after about 20 minutes and the usual offer to send info to Microsoft, even if Encore is simply opened and a empty project created.
    The solution is to rename the Ralcodec and associated files:
    Cachex.dll
    FXlib.dll
    MedMan.dll
    MLPagAX.dll
    RALCodec.dll
    RALCtrl.cpl
    RALMain.dll
    from the C:\Windows\system32 directory, reboot and then delete them.
    Of course your DC-2000 won't work anymore but that is probably not
    an issue.
    Some other details in case anyone cares: The Pinnacle software
    is loaded by Encore because Encore enumerates all installed
    codecs. When loaded, the Pinnacle software
    creates a hidden window called AudioInputWnd and then listens
    for various Windows messages on this window. This processing
    goes on in the background while Encore is running and eventually
    results in the app crash. Note that 3 years ago, when using
    Premiere 6.5 with the Pinnacle DC-2000 I used to get occasional
    crashes when exiting Premiere. The error message displayed at
    that time referenced AudioInputWnd as well. So it appears
    that even back then, with Premiere 6.5, there was a problem with the Pinnacle software.
    The crash of Encore 2.0 doesn't produce a message explicitly
    referencing AutioInputWnd but under Windbg you can
    see that the software is dispatching a message received from that
    window's queue. When RALcodec is removed, the AudioInputWnd
    is not even created anymore when Encore is run.
    I would note that Adobe support was unable to solve this problem and
    suggested the usual unhelpful littany of reinstallation of Encore and
    to update the video drivers when I first called it in 3 months ago. Another person, Dave Shriver also reported essentially identical problems in the Encore forum back in Februrary. The root cause appears to have actually existed in the Adobe certified bundle of Premiere 6.0/6.5 with the DC-2000 before resurfacing in the present form with Encore 2.0.

    The simplest way to reinstall iPhoto and iMovie is to download Pacifist and then extract the relevant applications from the Software Restore Discs.
    Pacifist comes with instructions; this is not a difficult operation and there is no need for erase & install to recover the applications.
    Pacifist is Shareware, but you need not pay the fee in order to use it. Every time that you open Pacifist you will be prompted to purchase a licence. If you feel that Pacifist is worth the money (and I think that it is), you can purchase a licence at any stage.
    If you're a plonker like me, then purchasing a licence will provide justification for third party developers like CharlesSoft to save the day for the rest of us.
    Good luck!

  • Error when installing Preview System

    Hello All,
    We are getting following error at the time of installation
    ERROR
    FCO-00034 An error occures during the installtion. Problem : Error in GUI server subsystem
    Communication port connection failed. Check whether port 21212 is already in use.
    Can anybody help us out here.
    Regards
    Ajay

    Hi Jorge,
    Even i am getting the same error.
    FGE-00006  Attempt to open a communication port connection failed. SOLUTION: Check whether the port 21200 is already in use.
    I am trying to install NW CE 7.2 Trial Version.
    Could you please help me in resolving this issue?
    where should i write this ./sapinst SAPINST_DIALOG_PORT=21213
    Thanks and Regards,
    Divya

  • Stuck during PKG install (Version of OSX not recognized)

    Hi all,
    I am trying to install several PKG files (Wireshark, XQuartz, R Software), but in each installation I get stuck during the "destination step" because I am unable to select my hard dive...
    Wireshark tells me the software requires OSX 10.6 or later, but I have OSX 10.9.5 !
    I have installed some PKGs before and it's the first time I get this type of errors.
    Help please!!!
    Thanke

    Sounds like you are just putting it to sleep. try holding down the power button for longer. if that doesn't fix it, unplug it, wait a few seconds, and plug it back in.

  • IE 11 is not blocked during Automatic Update step.

    Greetings.
    I am experiencing something very strange with our Windows Deployment Servers.
    I have WDS 2013 with AIK-8.1 combination server to do our machine deployment. Some of our machines need to have IE11 blocked from installation (for compatability issue). As in case with IE10 before we installed blocker from microsoft and then captured image.
    Before capturing it it was tested by runnign auto update and ie 11 is not being installed.
    Problem is during deployment during automatic update step (post application) the system picks up and installs ie11.
    If I remove it by hand after installation is over and run windows update - it's not installed. If I disable auto-update step in installation - and run them by hand after - it's not installed.
    Does anyone else experienced this scenario when blocker doesn't seem to have effect?

    Hi,
    According to FAQ here:
    Internet Explorer 11 Blocker Toolkit: Frequently Asked Questions
    http://technet.microsoft.com/en-us/ie/dn449234.aspx
    What registry key is being used to disable delivery of Internet Explorer 10?
    HKLM\SOFTWARE\Microsoft\Internet Explorer\Setup\10.0
    When the installation is over and about to updating, cancel the update and check the registry key.
    A value of 1 turns off the automatic delivery
    of Internet Explorer 11 using Automatic Updates and turns off the Express install option.
    Not providing a registry key, or using a value of anything other than 1,
    lets the user install Internet Explorer 11 through Automatic Updates or a manual update.

  • When I try to install the 'GOOD for enterprise" app, I am getting error 0x100001 during retireve settings step. I followed the step of reloading the OS to fix this as suggested in another thread but even after that I have the same problem. Please help.

    when I try to install the 'GOOD for enterprise" app, I am getting error 0x100001 during retireve settings step. I followed the step of reloading the OS to fix this as suggested in another thread but even after that I have the same problem. Please help.
    Regards,
    Nagarajan Kadhiresan

    if you using the same port, maybe this issue caused by your kingmax
    to make it fast, try your king max at other PC, if cant detect, please reformat your king max

  • Show error message when Install SM7 in step 4 execute Service

    Hi All
    Show error message when Install SM7 in step 4 execute Service.
    Anyone can help me fix the problem pls!
    Regards
    Kevin
    Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
    Information for SAPInst:
    sid=SMD
    number=98
    2009.06.08 11:16:59
    Task completed with status 0
    INFO 2009-06-08 11:17:00.0
    Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:00.250
    FSL-02077  File system export (share) saploc does not exist.
    INFO 2009-06-08 11:17:00.484
    Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:00.718
    FSL-02077  File system export (share) saploc does not exist.
    INFO[E] 2009-06-08 11:17:05.265
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO 2009-06-08 11:17:05.609
    Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:05.875
    FSL-02077  File system export (share) saploc does not exist.
    INFO[E] 2009-06-08 11:17:08.187
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:10.531
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:12.859
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:15.156
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    WARNING[E] 2009-06-08 11:17:20.281
    FSL-01002  Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
    INFO 2009-06-08 11:17:20.562
    Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO 2009-06-08 11:17:20.781
    Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO 2009-06-08 11:17:22.312
    Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
    INFO 2009-06-08 11:17:28.828
    Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
    INFO 2009-06-08 11:17:29.093
    Node C:\WINDOWS\system32 already exists.
    INFO 2009-06-08 11:17:31.0
    Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
    INFO 2009-06-08 11:17:32.390
    Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
    INFO 2009-06-08 11:17:33.171
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.203
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.250
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.281
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.328
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.375
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.421
    Nothing to do. User privileges are an empty string.
    INFO[E] 2009-06-08 11:17:35.703
    FSL-01027  Account user="hk-is-000818\SAPServicePAS" does not exist.
    WARNING[E] 2009-06-08 11:17:40.796
    FSL-01002  Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
    WARNING[E] 2009-06-08 11:17:40.796
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2009-06-08 11:17:40.843
    FCO-00011  The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

    hi Subhash
    tkx it work
    but I got another error when install afterwards. do u know how can fix , many tkx
    Kevin
    WARNING 2009-06-09 20:39:02.421
    Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
    WARNING[E] 2009-06-09 20:39:02.437
    CJS-00095  Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
    WARNING[E] 2009-06-09 20:39:02.437
    CJS-00095  Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
    ERROR 2009-06-09 20:39:02.468
    FCO-00011  The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .

  • 5th generation ipod not detected by my windows xp.  works fine on other pc.  performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

    5th generation ipod not detected by my windows xp.  works fine on other pc.  performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

    I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
    Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
    Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
    Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
    - reset
    - fully charged,
    - cable works fine on two other computers
    - in normal or disk mode makes no difference
    - tried to find anything useful in the diagnostics mode
    - reinstalled iTunes several different times since then to the latest version
    - I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
    - I've never used any Mac with this ipod
    - I've tried fiddling with the win7 Services by stopping and restarting them and of course
    - uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
    - Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
    Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
    iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
    Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
    I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
    I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
    Here are two screengrabs from my Device Manager
    and Devices and Printers screens on my comp:
    That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
    If you think you have any idea PLEASR HELP, I'M DESPERATE!

  • I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PL

    I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!

    Hi jim1287,po
    Check for the latest updates. Installing latest updates should resolve this problem.
    Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
    Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
    Regards,
    Ajlan Huda.

  • Error when installing SM7 "The step runMigrationMonitor with step key "

    Hi all
    Please help for the following error when installing
    ERROR 2009-06-13 00:27:13.515
    FCO-00011  The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    Regards
    Kevin

    Hi Uday
    import.monitor.java.log
    Loading of 'SASACONT1' import package: OK
    Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
    Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
    Loading of 'SAPSSEXC' import package: ERROR
    Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
    Loading of 'REPOSRC' import package: ERROR
    Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
    Loading of 'SAPAPPL0' import package: ERROR
    Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
    Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
    Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
    Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
    Loading of 'DOKCLU' import package: ERROR
    Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
    Loading of 'SAPAPPL1' import package: ERROR
    Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
    Loading of 'SAPAPPL2' import package: ERROR
    Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
    Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
    Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
    Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
    Loading of 'DD03L' import package: ERROR
    Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
    Loading of 'SAPSSRC' import package: ERROR
    Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
    Loading of 'STERM_TEXT' import package: ERROR
    Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
    Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
    Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
    Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
    Loading of 'SEOSUBCODF' import package: ERROR
    Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
    Loading of 'E071K' import package: ERROR
    Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
    Loading of 'SAPSDIC' import package: ERROR
    Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
    Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
    Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
    Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
    Loading of 'ATAB' import package: ERROR
    Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
    Loading of 'SAPSPROT' import package: ERROR
    Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
    Loading of 'SAPSDOCU' import package: ERROR
    Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
    Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
    Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
    Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
    Loading of 'SAPPOOL' import package: ERROR
    Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
    Loading of 'SAPSLOAD' import package: ERROR
    Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
    Loading of 'SAPSLEXC' import package: ERROR
    Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
    Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
    Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
    Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
    Loading of 'SAPDDIM' import package: ERROR
    Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
    Loading of 'SAPDFACT' import package: ERROR
    Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
    Loading of 'SAPCLUST' import package: ERROR
    Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
    Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
    Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
    Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
    Loading of 'SAPDODS' import package: ERROR
    Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
    Loading of 'SAP0000' import package: ERROR
    Import Monitor jobs: running 1, waiting 1, completed 4, fail
    ed 23, total 29.
    Loading of 'SAPUSER' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
    Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
    Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

Maybe you are looking for