Student Edition missing MAX

I am using Labview 8.0 Student Edition at home to assist in work duties and have run into a snag. I was trying to make a Simulated Device, and when I tried to open Measurement and Automation, it wasn't there. I don't know how I missed it before but have been switching between work and home and just didn't notice this before.
It is referenced in the Student Edition Manual, Cahp. 9, Sec. 8 so I am assuming that it is available.
Is there a special download that I have to use to enable MAX in the Student edition?
Thanks in advance

MAX gets installed when you install device drivers. If you want to create a simulated device, you need the DAQmx drivers. You can download them at:
http://joule.ni.com/nidu/cds/view/p/id/276/lang/en
KostasB
NI UK

Similar Messages

Acrobat 9 serial missing (CS5 Student Edition)

Cheers,
I have a CS5 / Student Edition here, bought, installed and registered 3 years ago.
I did not install Acrobat 9 then (only the Suite) , and now that I try to do so I am missing a Serial for it.
Acrobat says the Serial for the Suite isnt working.
What´s wrong here?
Thanks .....

No ideas?
Did I forget to register Acrobat back then ?
Can do it now, and most important: HOW ?

Missing Document "Erste Schritte in LabView" for current Student edition 2014

Can anyone tell me where i can find the current documents for
"Erste Schritte in LabView" to go with the 2014 ServicePack 1 Student edition ?
All i can seem to find is those for the 2013 version:
373427J-0113, 323427J-0113
wich contain a hint that there's a newer version, but the search link redirects to the same document.
they seem to have quite a few differences, especially the tutorial documents they refer to didn't come with my install.
In Addition where can i find the tutorials folder they refer to? is that an extra download package?

Hallo P.Bepler
It seems that there is no getting started for LabVIEW 2014. I think the differences between the basic operations of 2013 and 2014 are not very large.
In addition, the tutorial folder of LabVIEW 2013 contained only two VIs. You will find one of them (generate and display) in the template folder "simulated" of LabVIEW 2014.
Best regards
John

Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition

Hi.
I had PhotoShop CS6 trial, which expired.
I have purchased Creative Cloud student edition, I receive a message that my PhotoShop trial has expired.
I am prompted to purchase the product to extend it, or type in the product's serial number
(I never received a serial number.)
I paid for Creative Cloud and have an order number, I should not be having this issue.
I have uninstalled and reinstalled PhotoShop CS6 multiple times, I also use DreamWeaver and am fearful that I will encounter the same issue. How can I use the Photoshop CS6 after I have paid for it?
Curonda in Milwaukee, WI.

Hi.
The trial expired 2 weeks ago - Monday.
I purchased the Cloud Yesterday, also 2 weeks ago Monday 10/15/2012.
I purchased it twice thinking 1 purchase did not complete.
I still will need to request a refund for 1, I've been too busy between, work, school, and kid. I'm at work now.
Miss Curonda
...Remember, happiness is not a mood its a decision.
Date: Thu, 25 Oct 2012 05:59:51 -0600
From: [email protected]
To: [email protected]
Subject: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition
Re: Cannot use PhotoShop CS6 after trial expired, even after purchasing Creative Cloud Student Edition created by Nikhil Bisne in Trial Download & Install FAQ - View the full discussion
Curonda,
Can you let us know the date when your trial expired and when you bought the Creative Cloud Subscription?
Thanks
Nikhil
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4799512#4799512
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4799512#4799512
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4799512#4799512. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

What is the best way to properly activate the Lightroom Student Edition? Is the Student Edition a permanent program or does it deactivate after 2-4 years like some other programs that are student versions?

I just purchased the student edition of Lightroom! I am very excited to use it and start creating beautifully edited photos but I'm a little unsure about a few things. It says I have to prove my eligibility to use the student edition which won't be an issue but what is the quickest and easiest way to submit this proof? Also I am concerned that the student edition will be temporary and I will have bought this program only to have it expire at the end of 4 years like some other programs that are student versions. Is the student edition of Lightroom a permanent program that I will have for life or will it deactivate after I graduate?

When I purchased my academic version of Lightroom, it was a package set. Inside was a yellow card with the instructions on how to verify that I qualified for the academic discount. I submitted my academic e-mail address and other info as requested on that yellow card. Within 5 min. I received my serial number. Very straightforward. I had no problems whatsoever.
There is only one version of the Lightroom program itself. The only difference is in the licensing and pricing. If you qualify for the academic discount, by all means use it. You are purchasing the same Lightroom program that anyone else does. It doesn't expire, there are no missing features, and it can be upgraded when new major versions are released. Those upgrades will cost the same as they cost for any other person, regardless of how they purchased Lightroom.
You can confidently move ahead with obtaining your serial number. The only thing you are doing differently is paying a lower initial purchase price because of your academic status.

How to compile a LabVIEW VI into a standalone .exe programme? (LV8.5.1 student edition)

Hi,
I have LabVIEW 8.5.1 Student Edition and am not sure how to compile my VI into a standalone executable (.exe file) that can run without LabVIEW being installed on the computer (no data cards are being read, the VI is providing a simulation of an experiment)?
Do I need to buy additional software to do this, or have I just missed an option in the LabVIEW menu's?
Thanks for the help

Building and distributing an executable is probably beyond the intended scope of the student edition. The application builder is not included.
(The application builder alone is several times the cost of the student edition....)
You have a few alternatives:
Check with your school, maybe they have a NI campus license, for example.
Maybe you can host the program on your computer and let others use it via the web (one at the time).
One of us can probably built the application for you if you post the VIs.
LabVIEW Champion . Do more with less code and in less time .

I have LabView Student Edition, how can I make work a USB 6008?

The Student edition it doesnot have many Vi's that there are necesary to work with a USB 6008, I would like to know how can I make work the Usb 6008 with LabView Student Edition

Hello Jorge,
When you say "NI-DAQmx configuration" do you mean the NI-DAQmx Base Configuration Utility? Are you using NI-DAQmx or NI-DAQmx Base to communicate with the 6008?
NI-DAQmx 7.5 added support for the USB-6008. Therefore, you can use either NI-DAQmx or NI-DAQmx Base to control this device. Make sure that you are setting the USB-6008 to NI-DAQmx before trying to use the NI-DAQmx VIs in LabVIEW. To do this, Open Measurement and Automation Explorer (MAX) and select Tools >> NI-DAQmx Configuration >> NI-DAQmx USB Driver Selector. Your USB-6008 should appear in this window, indicating which driver your device is configured for. Make sure it is set to NI-DAQmx before trying to use the NI-DAQmx VIs.
When your 6008 is set to NI-DAQmx, you cannot use NI-DAQmx Base or any of the DAQmx Base examples. Likewise, when the 6008 is set to NI-DAQmx Base, you cannot use any NI-DAQmx VIs.
If you would like to use NI-DAQmx with your USB-6008, please set the driver by following the steps above and verify that "USB-6008" is listed under "Devices and Interfaces >> NI-DAQmx Devices" in MAX.
I hope this helps. Please let me know if you continue having trouble with your USB-6008.
Regards,
Sean C.

Who is eligible to use the Labview 8 student edition?

Who is eligible to use the Labview 8 student edition? Can an individual who is not in school or affiliated with a learning institution purchase and register it for the purpose of learning at home?

LabTech wrote:
Maybe I'm missing something, but I still am not sure of the answer to my question about the Student Edition . Maybe it hinges on what the word staff means in this case?
I would interpret "staff" in the most general case. If you are employed by an educational institution, and not student or faculty, your'e probably "staff".
The main restriction on the student edition is in its use. You can only use it for personal educational use and not for research. For research in a lab, you need to get the real LabVIEW. See e.g. point #4 in the FAQ: http://www.ni.com/labviewse/labviewse_faq.htm ).
Still, the educational discounts are great (75% on single copy software: http://www.ni.com/academic/edu_dsct.htm ).
Message Edited by altenbach on 09-13-2006 10:02 AM
LabVIEW Champion . Do more with less code and in less time .

Trying to install Student Edition of Labview 2011, but instead got 2010

I'm installing the Student Edition of Labview 2011 on a laptop and finally when finished it turns out to be the Student edition Labview 2010, Service Pack 1 version 10.0.1. The receipt clearly say LabVIEW 2011 Student Edition Software - Suite - Download. Did I miss a step or something while installing?

Nevermind... Needed more sleep. For some reason when it created the icon it selected the 2010 verson not the 2011 verson.

Purchased Teacher and Student edition, but with the trial expired, I cannot use any products?

I bought the Teacher and Student edition (one year plan, prepaid), but after the trial expired, I cannot use any products. It asks for a serial number, which to the best of my knowledge, I never received. Is there something I missed?
Thanks in advance.

Trimatirate you will need to locate the serial number you received with your license to use the software for a year. If it is registered then it will be available under your account at http://www.adobe.com/. You can find additional details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Student edition Ultiboard

Hello, I just installed the student editon of Multisim/Ultiboard. I was using the trial and everything was OK. Now in Ultiboard I no longer have the option to change trace width on the fly. I can only place lines; CTRL-T no longer works. When I bring the projects to school, I am able to change the trace width by right clicking while placing a trace or using the Drawing toolbar. I have tried checking all the options settings, reading through the help, reinstalling Ultiboard, and deleting the config files. Is there something that I am missing?

Hello,
Multisim Student edition does not include the Follow-me Router (Ctrl+T) and you can't change the trace width by right-clicking (Widen, Narrow) or using the toolbars. However, you can use the Spreadsheet View (Nets tab) to make changes. Most likely your school lab has Multisim Educational (to check this go to Help>>About Multisim), this edition does contain the features you are looking for.
The following document contains the differences between Multisim Student and Educational:
NI Multisim and NI Ultiboard Academic Features
Best regards,
Fernando D.
National Instruments

LabVIEW 8.5.1 Student edition - differences between Mac and Windows version?

Hi,
I've just bought the student version of LabVIEW 8.5.1 and am using Mac OS X 10.4.11. What are the biggest differences between the Mac and Windows versions since the box came with a Mac installer CD and a Windows installer DVD?
Cheers
Solved!
Go to Solution.

Looks like you got the LabVIEW Student Edition Software Suite DVD.
It comes with 6 toolkits, and from the product spects, some (or all?) of those are windows only (at least in 8.5), e.g.:
Digital Filter Design Toolkit
Modulation Toolkit
SignalExpress
Since you have 8.5, you are also missing a few basic things that only recevied MAC support in 8.6, such as Mathscript, Control design and Simulation, and Native 3D graphs.
LabVIEW Champion . Do more with less code and in less time .

Is there a way to open a .mst file created in the student edition with MULTISIM 9

When a student builds a file with MultiSIM 9, the circuit is created as a .msm file. When the student goes home to work, they can open a .msm file with a student version, 2001 for example, but any change to the file can only be saved as a .mst file. As soon as the file is saved as a .mst file, we have not found a way to open the file with the educational version of MultiSIM 9. Is there any way to convert these files? This makes it very difficult for a student to work at home for a project between or prior to labs.
Thanks

JKR,
Unfortunately, the ".mst" extension is supposed to be open only by Textbook editions of Multisim. Not even a Power Pro version would be able to open it.
I'm not sure the specifics of your case, but I guess that you open/saved the circuit on your textbook edition and that converted the file extension, is that right?...
Well, as far as I know the textbook editions are meant to be 'demo' type of releases, so is limited in many features. You should be OK with a Student edition though -- which is not the one commonly found in textbooks.
Nestor
National Instruments

Upgrade to Adobe CC with the conditions of the "special offer" (35,69€ / year) with an old registered CS5 Students Edition?

Hi!
I just tried to update my Adobe Creative Suite to Adobe CC. I have a registered CS5.5 Master Collection from 2012 that I bought while studying (Students Edition).
On the Adobe Website I can choose the CC as a special offer and a price o 35,69€ per year. When my Serial is checked they say that I'm not allowed to use this special offer.
Does anybody know what's the problem? Can't I use the special offer with the old serial of a student's edition?
Thank's for your help!
Best!!!

No. Student licenses cannot be used per the terms and conditions...
from: Terms and Conditions | Adobe
"Eligible customers may purchase an Adobe® Creative Cloud™ Complete Membership with annual commitment for a reduced price. Offer valid for purchases of an annual plan, which requires a 12-month contract. This offer is only available to customers who own a Creative Suite edition or individual product in one of the following versions (CS3.x, CS4, or CS5.x, or CS6), and who purchase directly from the Adobe Store or by calling a regional Adobe Call Center. This offer is not available to Education, OEM, or volume licensing customers."

Download student edition on new computer

I got a new computer and need to download my student edition of design premium. How do I get my serial number? I am no longer at the college I was at when I first registered the product, so I cannot check that email to find the original email send with the serial number. Can they look it up another way?

Hi GAlendarer,
You can use the following download link to download the Product you are looking for and use the serial number available with you. Make sure to deactivate the product from your older machine as well.
Other downloads
Cheers,
Kartikay Sharma

Student Edition missing MAX

Similar Messages

Maybe you are looking for