Student License Key on Trial Installation

Hi - I am planning to purchase a student license for Photoshop CS6 but was wondering if I can install it on my laptop provided by my work?  I am a student and meet the purchase requirements but if I install on my work laptop, will it:
Allow me to enter the key for registration on the trial download from Adobe?
Allow me to uninstall when needed and transfer my license to another computer later?
Will it state that it is a Student edition when you open the program or will it just say Photoshop CS6?
Do you qualify for product upgrades?
I want to install on the work laptop because it is a MUCH better computer than my desktop.
thanks!

I'll start by saying I don't have personal experience with student licensing, nor do I know whether anything specific is changed in CS6, but I do know some about how it has worked in the past.  Also, regarding upgrade policy, things change, so no one can say for sure what the future holds.  Note specifically that traditionally upgrade policy has been changing coincident with the release of CS6.
Disclaimers aside, you're probably good to go.  You may not know that, per the EULA, a single Photoshop license actually allows you to install and activate the software on up to two computers (e.g., your desktop and your laptop).
As far as I know a student serial number works in every way just like a regular serial number.  You just have to jump through hoops to prove you're a student before you can actually GET that serial number, so make sure to do it early in the evaluation period or you may find the evaluation expiring before you get your serial number with which to activate it.
Yes, you'll be able to deactivate the software then move to another computer.
I don't know if it says "Student Edition" anywhere, but I doubt it.  It's always been a fully functional version in the past.  That said, there seems to be language on Adobe's pages now that imply the Student Edition is separate...  That could just be marketing.
A student edition has always in the past qualified the owner for a regularly priced upgrade (same as everyone else pays).  In other words, there is not a doubly-discounted upgrade for students.
-Noel

Similar Messages

  • Installing Sybase SQL Anywhere license keys after initial installation.

    Hi,
    I installed Sybase SQL Anywhere 16 before I actually received the valid License Key. So during the installation I've used the license key provided by the instructions.  Afterwards, I've received the purchase license key.  Do i need to reinstall SQL Anywhere all over?  Or can it just continue to function on that license key?  From what i understand, I can not change the license key after the installation was complete.  I would have to completely uninstall and re-install SQL Anywhere 16. Is that correct?
    Thanks
    Aron

    Hi Aron,
    I would have to completely uninstall and re-install SQL Anywhere 16. Is that correct?
    No, you don't have to do this in SQL Anywhere 16 - you can change SQL Anywhere editions by changing the license key on the accompanying server executable license file (e.g. dbsrv16.lic) with the Server Licensing Utility (dblic). You can use the "-k" switch in order to specify a new key:
    dblic -k <reg_key> dbsrv16.lic
    Regards,
    Jeff Albion
    SAP Active Global Support

  • Does the Student License Allow for Two Installs?

    Does the Student License Allow for Two Installs?
    I have a desktop iMac and a Macbook notebook. I just purchased Adobe Web Standard CS3 (student license).
    Can I install and activate the package on both of my computers? I know I could do this with a regular license, but I was unsure about the student license.
    Thanks in advance.
    Dave

    HEEEEEELPPPPPPPPPP, PLEASE
    I purchased adobe cs3 primium but i already had photoshop installed. I installed cs3 primium and now i keep getting the error that the licensing has stopped working can't use file cont IT or cust. support. I tried to download the clean file and it gives me the same error to open this file. i tried to uninstall with control panel programs and uninstall and it gives me the error uninstall not complete. I tried to repair with disc and uninstall with the disc and nothing is working. I have windows vista with 100g hd 500 mem duo core all the proper requirements but i can't get this to work.'
    HELP anyone

  • How do I get license key for trial app, now that I have joined Creative Cloud ?

    how do I get license key for trial app, now that I have joined Creative Cloud ?

    after trying again, the signin process worked and activated my trial copy for me.

  • How Do I get a License key for Trial version from the App Store?

    I downloaded a Trial version of Aperture 3.1.2 a few weeks ago from the App Store. I love it. Now I want to buy it, but, can't figure out how to get a license key from the App Store. When you start up Aperture Trial version, a 'nag' box comes up asking if you want to buy the application or continue using the trial version or Authorize (I guess that is what you would pick once you have the key). If I pick "Buy", the application opens Safari and takes me to the Apple online store, NOT the App store! At the Apple Store, you can buy the key for $199 or an upgrade from a previous version for $99. Whoopie! What is Apple thinking? The App store is selling Aperture for $79.99. I guess that means you don't get the box or written manuals (which I haven't used for any software in many years).
    So how do I get a license key for the App Store version? Do I just Go to the App Store, pay the money, download and install the program over again. Then transfer my trial version library somehow? Then deinstall the trial version? I'd love to buy and use Aperture for $79.99, but, I'm not willing to pay $199 for it.  Apple has me confused.
    Anybody have a clue?

    Thanks for the 1-800 call tip Allen.
    P.S. I'm quite willing to put in the time and effort necessary to learn Aperture (or any other software I decide to use, "Pro" or not). I simply don't see the value in buying the box version when I'm pretty sure I won't be using any paper manuals.  I very comfortable using online help files, having done so as a professional numerical control programmer for many years in my work. For reference, I'm retired, on a limited income and will be using Aperture as a rank amateur photographer who could use a little more horsepower than iPhoto offers.
    I'll call Apple tomorrow.
    Kevin

  • Putting the license key in the installer w/ wix and RDC

    Post Author: dblock
    CA Forum: Crystal Reports
    I am rewriting an old installer in wix (wix.sourceforge.net). The installer deployed RDC "by hand", where they picked the files and stuck them into the InstallShield installer. I got the merge modules instead. The readme for the merge modules says:
    license.msm - This merge module is used to apply the license keycode during installation. It exposes a custom property called License Key which must be populated with the keycode found on the Crystal Reports 9 CD envelope. This merge module is always required. 
    What does this mean? Do I just create a property called License Key and put the key in there? Has anyone done this with wix?
    thxdB.

    Dell - Internal Use - Confidential
    Hello Anubha,
    Thank you for getting back to me. The customer has a larger issue than the serial number, he is missing updates and the .Net Framework would not install in order to apply the updates. We will try a new approach to resolve the issue. You can archive this case.
    Regards,
    Monisa O’Brien
    Sr. Technical Support Specialist
    Dell | ProSupport
    Toll Free 1 866 876 3355
    [email protected]<mailto:[email protected]>
    My work schedule is 8:30 am - 5:30 pm CST | Mon, Tues, Wed, Thurs, and Fri.
    Customer feedback | How am I doing? Please contact my manager Jim Archer<mailto:[email protected]>

  • License key for software installation

    I can not find my license key for the new hp deskjet 1010 printer that I bought and I have the disc that came with the printer but my laptop does not have a place to put a disc in for installation so I tried to download the installation info for my printer from the internet and I keep getting ask for my licensing key number but I dont know where to find this info. Please advise.

    Hi, Which license key are you talking about ? hp deskjet 1010 printer does not require license key to install. Please use the CD which came with the peinter. Regards.

  • How do I apply license key to trial?

    I have a License Key for Adobe Master Collection (6.0) for Mac.  How do I download the entire collection, and how do I apply the license to all the free trials?

    Hi there
    You can download the Master Collection CS6 trial from here and then use your serial number to license it: http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Please follow all the steps under "Note: Very Important Instructions"
    Thanks
    Bev

  • Add license key to trial -- i.e. upgrade to full

    I installed FB4 Pro trial as an Eclipse plug-in to my existing Eclipse install a few days ago.  My employer has since acquired a license key for me to use.  How do I tell my trial install the key and so turn off the time limit?  Help > Deactivate Flash Builder... is greyed out.
    Thanks.

    Here are some steps to try:
    - with your copy of eclipse running, switch to using the Flash perspective
    - if that doesn't trigger the SN dialog automatically, quit and re-launch eclipse.
    Sometimes you need to quit/relaunch eclipse once or twice before the activation dialog appears for FB4 Plug-in.
    -Chris

  • Looking for the parameter/command line to supply the license key during the installation of Adobe Captive CS6 application.

    Hello - We are performing customize installation for Captive CS6 with the help of AAMEE tool. We have couple of licenses which we wish to supply over the installation command line during deployment. However we did not find any parameter or the command line which will allow us to enter the license key during installation.  Has any one succeed in finding the command line where we can pass the license key during installation of this application?
    Thanks.

    Can you post the last bit of your log file?  100 or so lines should be plenty to see what's going wrong.

  • License key for Trial of SAP Netweaver app server ABAP 7.4 on SAP MaxDB

    Hello
    I am neither an existing SAP customer or a Partner. I am trying to setup a  trial of SAP Netweaver app server ABAP 7.4 for using it as a data source on SAP Mobile Platform for OData services connection to ABAP system. On the Account creation screen, the system prompts me for the license key and secret key after Cloud service provide name (AWS). I dont have this keys. Can someone help to get me some clues as to what are the possibilities.
    Thanks
    Snehal Pandya

    Hi Snehal,
    please have a look at our FAQ: SAP Cloud Appliance Library - FAQ
    Especially the "specific questions for AWS" section gives you the right information.
    Regards,
      Hannes

  • License key dissapears after installation of BO Integration Kit for SAP

    Hello,
    I installed BO Edge 3.1 on Suse Linux Enterprise Server 10 (x86_64). After installation I see the license key for 10 named users in CMCand I could add new users.
    Then I installed the BO Integration Kit for SAP. After this installation the license keys are gone. I could not change the new added user and I can not implement the SAP Authentication. The message is "now valid license key for any concurrent user".
    After Deinstallation of BO Integration Kit for SAP with AddOrRemoveProducts.sh the license key is still gone. I am working with permanent license keys from BO.
    Thanks in advance for your help
    Thomas Windischmann

    Hi,
    in the meantime I solved the problem with support from BO. Although I am using the installation software for BO Edge 3.1 and SAP Integration Kit from the same DVD (BOBJ EDGE BI 3.1 Standard Package, #51035489) there is a inconsistency of libkeydecoder.so between BO Edge installation and SAP Kit installation. After installation of SAP Integration Kit you have to replace this lib with the old lib of BO Edge installation.
    Thomas

  • License Key for Trial Version

    Due to a momentary lapse of workload I want to give RH6 a
    trial run.
    But the installation procedure insists on me entering a
    registration key and one hour after downloading my mailbox shows no
    sign of a trial key.
    Anyone having more success?
    ---Dirk Bock

    Hello AlScott9028001 ,
    I apologize that you are having difficulties with the
    installation of RoboHelp 6. Our customer service department would
    love to assist you with this issue. The phone number is
    800-833-6687. If for some reason customer service cannot help, then
    the tecnical support phone number is 800-642-3623.
    Thank you,
    Bobby Walker
    Adobe Technical Support

  • License key for trial Adobe LiveCycle

    How do I add the licesne key I have purchased to the Adobe LiveCycle trial version loaded on my PC?

    Hi Snehal,
    please have a look at our FAQ: SAP Cloud Appliance Library - FAQ
    Especially the "specific questions for AWS" section gives you the right information.
    Regards,
      Hannes

  • Sourcefire license key for trial

    Hi,
    Is there any way for Partner to request trial license for Sourcefire products?
    I have just downloaded software Sourcefire for VM on Cisco but dont know how to request a license. Just following cisco.com/go/license
    Thanks.

    It will be much faster if you contact the pre-sales helpdesk at Cisco. See the following on getting a demo/lab license.
    https://communities.cisco.com/docs/DOC-55301
    Hope it helps.

Maybe you are looking for

  • SQL Authenticator Issue not able to see roles /groups in BPM Worklist

    Hi , I had configured the SQL Authenticator in Web logic using the SQL Authenticator default scripts and i have inserted few users. I am able to login to the Workspace using the users available in DB but i am not to able to see his group / role to wh

  • Deleted Temp files still visible in certain softwares.

    Hi, I want to know how to get rid of Temp files like (.dwl, .dwl2) or even come xlsx files which have already been deleted but are still visible in some softwares. For example when I do a backup using the Carbon Copy Cloner, I still get the option to

  • How to show the errors in browser  from servlet?

    con=dataSource.getConnection();                                         System.out.println("before..............");                                         System.out.println("1.the mag value is:"+req.getParameter("mag"));                            

  • AppWorld will not launch after upgrade but appears to be runing constantly.

    I upgraded Blackerry AppWorld and since cannot open it. The icon is there. I've uninstalled it and reinstalled it. I've taken battery out and rebooted - none of which have helped. Can't find an answer to this problem here.

  • Help with RRI

    I needed some basic steps to implement RRI. I found some resources but they are little complicated for a newcomer to follow. Any help is appreicated.